WSL2-Linux-Kernel/lib/zlib_dfltcc/dfltcc_deflate.c

280 строки
9.0 KiB
C

// SPDX-License-Identifier: Zlib
#include "../zlib_deflate/defutil.h"
#include "dfltcc_util.h"
#include "dfltcc.h"
#include <asm/setup.h>
#include <linux/zutil.h>
/*
* Compress.
*/
int dfltcc_can_deflate(
z_streamp strm
)
{
deflate_state *state = (deflate_state *)strm->state;
struct dfltcc_state *dfltcc_state = GET_DFLTCC_STATE(state);
/* Check for kernel dfltcc command line parameter */
if (zlib_dfltcc_support == ZLIB_DFLTCC_DISABLED ||
zlib_dfltcc_support == ZLIB_DFLTCC_INFLATE_ONLY)
return 0;
/* Unsupported compression settings */
if (!dfltcc_are_params_ok(state->level, state->w_bits, state->strategy,
dfltcc_state->level_mask))
return 0;
/* Unsupported hardware */
if (!is_bit_set(dfltcc_state->af.fns, DFLTCC_GDHT) ||
!is_bit_set(dfltcc_state->af.fns, DFLTCC_CMPR) ||
!is_bit_set(dfltcc_state->af.fmts, DFLTCC_FMT0))
return 0;
return 1;
}
static void dfltcc_gdht(
z_streamp strm
)
{
deflate_state *state = (deflate_state *)strm->state;
struct dfltcc_param_v0 *param = &GET_DFLTCC_STATE(state)->param;
size_t avail_in = avail_in = strm->avail_in;
dfltcc(DFLTCC_GDHT,
param, NULL, NULL,
&strm->next_in, &avail_in, NULL);
}
static dfltcc_cc dfltcc_cmpr(
z_streamp strm
)
{
deflate_state *state = (deflate_state *)strm->state;
struct dfltcc_param_v0 *param = &GET_DFLTCC_STATE(state)->param;
size_t avail_in = strm->avail_in;
size_t avail_out = strm->avail_out;
dfltcc_cc cc;
cc = dfltcc(DFLTCC_CMPR | HBT_CIRCULAR,
param, &strm->next_out, &avail_out,
&strm->next_in, &avail_in, state->window);
strm->total_in += (strm->avail_in - avail_in);
strm->total_out += (strm->avail_out - avail_out);
strm->avail_in = avail_in;
strm->avail_out = avail_out;
return cc;
}
static void send_eobs(
z_streamp strm,
const struct dfltcc_param_v0 *param
)
{
deflate_state *state = (deflate_state *)strm->state;
zlib_tr_send_bits(
state,
bi_reverse(param->eobs >> (15 - param->eobl), param->eobl),
param->eobl);
flush_pending(strm);
if (state->pending != 0) {
/* The remaining data is located in pending_out[0:pending]. If someone
* calls put_byte() - this might happen in deflate() - the byte will be
* placed into pending_buf[pending], which is incorrect. Move the
* remaining data to the beginning of pending_buf so that put_byte() is
* usable again.
*/
memmove(state->pending_buf, state->pending_out, state->pending);
state->pending_out = state->pending_buf;
}
#ifdef ZLIB_DEBUG
state->compressed_len += param->eobl;
#endif
}
int dfltcc_deflate(
z_streamp strm,
int flush,
block_state *result
)
{
deflate_state *state = (deflate_state *)strm->state;
struct dfltcc_state *dfltcc_state = GET_DFLTCC_STATE(state);
struct dfltcc_param_v0 *param = &dfltcc_state->param;
uInt masked_avail_in;
dfltcc_cc cc;
int need_empty_block;
int soft_bcc;
int no_flush;
if (!dfltcc_can_deflate(strm))
return 0;
again:
masked_avail_in = 0;
soft_bcc = 0;
no_flush = flush == Z_NO_FLUSH;
/* Trailing empty block. Switch to software, except when Continuation Flag
* is set, which means that DFLTCC has buffered some output in the
* parameter block and needs to be called again in order to flush it.
*/
if (flush == Z_FINISH && strm->avail_in == 0 && !param->cf) {
if (param->bcf) {
/* A block is still open, and the hardware does not support closing
* blocks without adding data. Thus, close it manually.
*/
send_eobs(strm, param);
param->bcf = 0;
}
return 0;
}
if (strm->avail_in == 0 && !param->cf) {
*result = need_more;
return 1;
}
/* There is an open non-BFINAL block, we are not going to close it just
* yet, we have compressed more than DFLTCC_BLOCK_SIZE bytes and we see
* more than DFLTCC_DHT_MIN_SAMPLE_SIZE bytes. Open a new block with a new
* DHT in order to adapt to a possibly changed input data distribution.
*/
if (param->bcf && no_flush &&
strm->total_in > dfltcc_state->block_threshold &&
strm->avail_in >= dfltcc_state->dht_threshold) {
if (param->cf) {
/* We need to flush the DFLTCC buffer before writing the
* End-of-block Symbol. Mask the input data and proceed as usual.
*/
masked_avail_in += strm->avail_in;
strm->avail_in = 0;
no_flush = 0;
} else {
/* DFLTCC buffer is empty, so we can manually write the
* End-of-block Symbol right away.
*/
send_eobs(strm, param);
param->bcf = 0;
dfltcc_state->block_threshold =
strm->total_in + dfltcc_state->block_size;
if (strm->avail_out == 0) {
*result = need_more;
return 1;
}
}
}
/* The caller gave us too much data. Pass only one block worth of
* uncompressed data to DFLTCC and mask the rest, so that on the next
* iteration we start a new block.
*/
if (no_flush && strm->avail_in > dfltcc_state->block_size) {
masked_avail_in += (strm->avail_in - dfltcc_state->block_size);
strm->avail_in = dfltcc_state->block_size;
}
/* When we have an open non-BFINAL deflate block and caller indicates that
* the stream is ending, we need to close an open deflate block and open a
* BFINAL one.
*/
need_empty_block = flush == Z_FINISH && param->bcf && !param->bhf;
/* Translate stream to parameter block */
param->cvt = CVT_ADLER32;
if (!no_flush)
/* We need to close a block. Always do this in software - when there is
* no input data, the hardware will not nohor BCC. */
soft_bcc = 1;
if (flush == Z_FINISH && !param->bcf)
/* We are about to open a BFINAL block, set Block Header Final bit
* until the stream ends.
*/
param->bhf = 1;
/* DFLTCC-CMPR will write to next_out, so make sure that buffers with
* higher precedence are empty.
*/
Assert(state->pending == 0, "There must be no pending bytes");
Assert(state->bi_valid < 8, "There must be less than 8 pending bits");
param->sbb = (unsigned int)state->bi_valid;
if (param->sbb > 0)
*strm->next_out = (Byte)state->bi_buf;
if (param->hl)
param->nt = 0; /* Honor history */
param->cv = strm->adler;
/* When opening a block, choose a Huffman-Table Type */
if (!param->bcf) {
if (strm->total_in == 0 && dfltcc_state->block_threshold > 0) {
param->htt = HTT_FIXED;
}
else {
param->htt = HTT_DYNAMIC;
dfltcc_gdht(strm);
}
}
/* Deflate */
do {
cc = dfltcc_cmpr(strm);
if (strm->avail_in < 4096 && masked_avail_in > 0)
/* We are about to call DFLTCC with a small input buffer, which is
* inefficient. Since there is masked data, there will be at least
* one more DFLTCC call, so skip the current one and make the next
* one handle more data.
*/
break;
} while (cc == DFLTCC_CC_AGAIN);
/* Translate parameter block to stream */
strm->msg = oesc_msg(dfltcc_state->msg, param->oesc);
state->bi_valid = param->sbb;
if (state->bi_valid == 0)
state->bi_buf = 0; /* Avoid accessing next_out */
else
state->bi_buf = *strm->next_out & ((1 << state->bi_valid) - 1);
strm->adler = param->cv;
/* Unmask the input data */
strm->avail_in += masked_avail_in;
masked_avail_in = 0;
/* If we encounter an error, it means there is a bug in DFLTCC call */
Assert(cc != DFLTCC_CC_OP2_CORRUPT || param->oesc == 0, "BUG");
/* Update Block-Continuation Flag. It will be used to check whether to call
* GDHT the next time.
*/
if (cc == DFLTCC_CC_OK) {
if (soft_bcc) {
send_eobs(strm, param);
param->bcf = 0;
dfltcc_state->block_threshold =
strm->total_in + dfltcc_state->block_size;
} else
param->bcf = 1;
if (flush == Z_FINISH) {
if (need_empty_block)
/* Make the current deflate() call also close the stream */
return 0;
else {
bi_windup(state);
*result = finish_done;
}
} else {
if (flush == Z_FULL_FLUSH)
param->hl = 0; /* Clear history */
*result = flush == Z_NO_FLUSH ? need_more : block_done;
}
} else {
param->bcf = 1;
*result = need_more;
}
if (strm->avail_in != 0 && strm->avail_out != 0)
goto again; /* deflate() must use all input or all output */
return 1;
}