675 строки
16 KiB
C
675 строки
16 KiB
C
/*
|
|
* SCOM FSI Client device driver
|
|
*
|
|
* Copyright (C) IBM Corporation 2016
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERGCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/fsi.h>
|
|
#include <linux/module.h>
|
|
#include <linux/cdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/uaccess.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/list.h>
|
|
|
|
#include <uapi/linux/fsi.h>
|
|
|
|
#define FSI_ENGID_SCOM 0x5
|
|
|
|
/* SCOM engine register set */
|
|
#define SCOM_DATA0_REG 0x00
|
|
#define SCOM_DATA1_REG 0x04
|
|
#define SCOM_CMD_REG 0x08
|
|
#define SCOM_FSI2PIB_RESET_REG 0x18
|
|
#define SCOM_STATUS_REG 0x1C /* Read */
|
|
#define SCOM_PIB_RESET_REG 0x1C /* Write */
|
|
|
|
/* Command register */
|
|
#define SCOM_WRITE_CMD 0x80000000
|
|
#define SCOM_READ_CMD 0x00000000
|
|
|
|
/* Status register bits */
|
|
#define SCOM_STATUS_ERR_SUMMARY 0x80000000
|
|
#define SCOM_STATUS_PROTECTION 0x01000000
|
|
#define SCOM_STATUS_PARITY 0x04000000
|
|
#define SCOM_STATUS_PIB_ABORT 0x00100000
|
|
#define SCOM_STATUS_PIB_RESP_MASK 0x00007000
|
|
#define SCOM_STATUS_PIB_RESP_SHIFT 12
|
|
|
|
#define SCOM_STATUS_ANY_ERR (SCOM_STATUS_ERR_SUMMARY | \
|
|
SCOM_STATUS_PROTECTION | \
|
|
SCOM_STATUS_PARITY | \
|
|
SCOM_STATUS_PIB_ABORT | \
|
|
SCOM_STATUS_PIB_RESP_MASK)
|
|
/* SCOM address encodings */
|
|
#define XSCOM_ADDR_IND_FLAG BIT_ULL(63)
|
|
#define XSCOM_ADDR_INF_FORM1 BIT_ULL(60)
|
|
|
|
/* SCOM indirect stuff */
|
|
#define XSCOM_ADDR_DIRECT_PART 0x7fffffffull
|
|
#define XSCOM_ADDR_INDIRECT_PART 0x000fffff00000000ull
|
|
#define XSCOM_DATA_IND_READ BIT_ULL(63)
|
|
#define XSCOM_DATA_IND_COMPLETE BIT_ULL(31)
|
|
#define XSCOM_DATA_IND_ERR_MASK 0x70000000ull
|
|
#define XSCOM_DATA_IND_ERR_SHIFT 28
|
|
#define XSCOM_DATA_IND_DATA 0x0000ffffull
|
|
#define XSCOM_DATA_IND_FORM1_DATA 0x000fffffffffffffull
|
|
#define XSCOM_ADDR_FORM1_LOW 0x000ffffffffull
|
|
#define XSCOM_ADDR_FORM1_HI 0xfff00000000ull
|
|
#define XSCOM_ADDR_FORM1_HI_SHIFT 20
|
|
|
|
/* Retries */
|
|
#define SCOM_MAX_RETRIES 100 /* Retries on busy */
|
|
#define SCOM_MAX_IND_RETRIES 10 /* Retries indirect not ready */
|
|
|
|
struct scom_device {
|
|
struct list_head link;
|
|
struct fsi_device *fsi_dev;
|
|
struct device dev;
|
|
struct cdev cdev;
|
|
struct mutex lock;
|
|
bool dead;
|
|
};
|
|
|
|
static int __put_scom(struct scom_device *scom_dev, uint64_t value,
|
|
uint32_t addr, uint32_t *status)
|
|
{
|
|
__be32 data, raw_status;
|
|
int rc;
|
|
|
|
data = cpu_to_be32((value >> 32) & 0xffffffff);
|
|
rc = fsi_device_write(scom_dev->fsi_dev, SCOM_DATA0_REG, &data,
|
|
sizeof(uint32_t));
|
|
if (rc)
|
|
return rc;
|
|
|
|
data = cpu_to_be32(value & 0xffffffff);
|
|
rc = fsi_device_write(scom_dev->fsi_dev, SCOM_DATA1_REG, &data,
|
|
sizeof(uint32_t));
|
|
if (rc)
|
|
return rc;
|
|
|
|
data = cpu_to_be32(SCOM_WRITE_CMD | addr);
|
|
rc = fsi_device_write(scom_dev->fsi_dev, SCOM_CMD_REG, &data,
|
|
sizeof(uint32_t));
|
|
if (rc)
|
|
return rc;
|
|
rc = fsi_device_read(scom_dev->fsi_dev, SCOM_STATUS_REG, &raw_status,
|
|
sizeof(uint32_t));
|
|
if (rc)
|
|
return rc;
|
|
*status = be32_to_cpu(raw_status);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __get_scom(struct scom_device *scom_dev, uint64_t *value,
|
|
uint32_t addr, uint32_t *status)
|
|
{
|
|
__be32 data, raw_status;
|
|
int rc;
|
|
|
|
|
|
*value = 0ULL;
|
|
data = cpu_to_be32(SCOM_READ_CMD | addr);
|
|
rc = fsi_device_write(scom_dev->fsi_dev, SCOM_CMD_REG, &data,
|
|
sizeof(uint32_t));
|
|
if (rc)
|
|
return rc;
|
|
rc = fsi_device_read(scom_dev->fsi_dev, SCOM_STATUS_REG, &raw_status,
|
|
sizeof(uint32_t));
|
|
if (rc)
|
|
return rc;
|
|
|
|
/*
|
|
* Read the data registers even on error, so we don't have
|
|
* to interpret the status register here.
|
|
*/
|
|
rc = fsi_device_read(scom_dev->fsi_dev, SCOM_DATA0_REG, &data,
|
|
sizeof(uint32_t));
|
|
if (rc)
|
|
return rc;
|
|
*value |= (uint64_t)be32_to_cpu(data) << 32;
|
|
rc = fsi_device_read(scom_dev->fsi_dev, SCOM_DATA1_REG, &data,
|
|
sizeof(uint32_t));
|
|
if (rc)
|
|
return rc;
|
|
*value |= be32_to_cpu(data);
|
|
*status = be32_to_cpu(raw_status);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int put_indirect_scom_form0(struct scom_device *scom, uint64_t value,
|
|
uint64_t addr, uint32_t *status)
|
|
{
|
|
uint64_t ind_data, ind_addr;
|
|
int rc, retries, err = 0;
|
|
|
|
if (value & ~XSCOM_DATA_IND_DATA)
|
|
return -EINVAL;
|
|
|
|
ind_addr = addr & XSCOM_ADDR_DIRECT_PART;
|
|
ind_data = (addr & XSCOM_ADDR_INDIRECT_PART) | value;
|
|
rc = __put_scom(scom, ind_data, ind_addr, status);
|
|
if (rc || (*status & SCOM_STATUS_ANY_ERR))
|
|
return rc;
|
|
|
|
for (retries = 0; retries < SCOM_MAX_IND_RETRIES; retries++) {
|
|
rc = __get_scom(scom, &ind_data, addr, status);
|
|
if (rc || (*status & SCOM_STATUS_ANY_ERR))
|
|
return rc;
|
|
|
|
err = (ind_data & XSCOM_DATA_IND_ERR_MASK) >> XSCOM_DATA_IND_ERR_SHIFT;
|
|
*status = err << SCOM_STATUS_PIB_RESP_SHIFT;
|
|
if ((ind_data & XSCOM_DATA_IND_COMPLETE) || (err != SCOM_PIB_BLOCKED))
|
|
return 0;
|
|
|
|
msleep(1);
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
static int put_indirect_scom_form1(struct scom_device *scom, uint64_t value,
|
|
uint64_t addr, uint32_t *status)
|
|
{
|
|
uint64_t ind_data, ind_addr;
|
|
|
|
if (value & ~XSCOM_DATA_IND_FORM1_DATA)
|
|
return -EINVAL;
|
|
|
|
ind_addr = addr & XSCOM_ADDR_FORM1_LOW;
|
|
ind_data = value | (addr & XSCOM_ADDR_FORM1_HI) << XSCOM_ADDR_FORM1_HI_SHIFT;
|
|
return __put_scom(scom, ind_data, ind_addr, status);
|
|
}
|
|
|
|
static int get_indirect_scom_form0(struct scom_device *scom, uint64_t *value,
|
|
uint64_t addr, uint32_t *status)
|
|
{
|
|
uint64_t ind_data, ind_addr;
|
|
int rc, retries, err = 0;
|
|
|
|
ind_addr = addr & XSCOM_ADDR_DIRECT_PART;
|
|
ind_data = (addr & XSCOM_ADDR_INDIRECT_PART) | XSCOM_DATA_IND_READ;
|
|
rc = __put_scom(scom, ind_data, ind_addr, status);
|
|
if (rc || (*status & SCOM_STATUS_ANY_ERR))
|
|
return rc;
|
|
|
|
for (retries = 0; retries < SCOM_MAX_IND_RETRIES; retries++) {
|
|
rc = __get_scom(scom, &ind_data, addr, status);
|
|
if (rc || (*status & SCOM_STATUS_ANY_ERR))
|
|
return rc;
|
|
|
|
err = (ind_data & XSCOM_DATA_IND_ERR_MASK) >> XSCOM_DATA_IND_ERR_SHIFT;
|
|
*status = err << SCOM_STATUS_PIB_RESP_SHIFT;
|
|
*value = ind_data & XSCOM_DATA_IND_DATA;
|
|
|
|
if ((ind_data & XSCOM_DATA_IND_COMPLETE) || (err != SCOM_PIB_BLOCKED))
|
|
return 0;
|
|
|
|
msleep(1);
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
static int raw_put_scom(struct scom_device *scom, uint64_t value,
|
|
uint64_t addr, uint32_t *status)
|
|
{
|
|
if (addr & XSCOM_ADDR_IND_FLAG) {
|
|
if (addr & XSCOM_ADDR_INF_FORM1)
|
|
return put_indirect_scom_form1(scom, value, addr, status);
|
|
else
|
|
return put_indirect_scom_form0(scom, value, addr, status);
|
|
} else
|
|
return __put_scom(scom, value, addr, status);
|
|
}
|
|
|
|
static int raw_get_scom(struct scom_device *scom, uint64_t *value,
|
|
uint64_t addr, uint32_t *status)
|
|
{
|
|
if (addr & XSCOM_ADDR_IND_FLAG) {
|
|
if (addr & XSCOM_ADDR_INF_FORM1)
|
|
return -ENXIO;
|
|
return get_indirect_scom_form0(scom, value, addr, status);
|
|
} else
|
|
return __get_scom(scom, value, addr, status);
|
|
}
|
|
|
|
static int handle_fsi2pib_status(struct scom_device *scom, uint32_t status)
|
|
{
|
|
uint32_t dummy = -1;
|
|
|
|
if (status & SCOM_STATUS_PROTECTION)
|
|
return -EPERM;
|
|
if (status & SCOM_STATUS_PARITY) {
|
|
fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy,
|
|
sizeof(uint32_t));
|
|
return -EIO;
|
|
}
|
|
/* Return -EBUSY on PIB abort to force a retry */
|
|
if (status & SCOM_STATUS_PIB_ABORT)
|
|
return -EBUSY;
|
|
if (status & SCOM_STATUS_ERR_SUMMARY) {
|
|
fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy,
|
|
sizeof(uint32_t));
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int handle_pib_status(struct scom_device *scom, uint8_t status)
|
|
{
|
|
uint32_t dummy = -1;
|
|
|
|
if (status == SCOM_PIB_SUCCESS)
|
|
return 0;
|
|
if (status == SCOM_PIB_BLOCKED)
|
|
return -EBUSY;
|
|
|
|
/* Reset the bridge */
|
|
fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy,
|
|
sizeof(uint32_t));
|
|
|
|
switch(status) {
|
|
case SCOM_PIB_OFFLINE:
|
|
return -ENODEV;
|
|
case SCOM_PIB_BAD_ADDR:
|
|
return -ENXIO;
|
|
case SCOM_PIB_TIMEOUT:
|
|
return -ETIMEDOUT;
|
|
case SCOM_PIB_PARTIAL:
|
|
case SCOM_PIB_CLK_ERR:
|
|
case SCOM_PIB_PARITY_ERR:
|
|
default:
|
|
return -EIO;
|
|
}
|
|
}
|
|
|
|
static int put_scom(struct scom_device *scom, uint64_t value,
|
|
uint64_t addr)
|
|
{
|
|
uint32_t status, dummy = -1;
|
|
int rc, retries;
|
|
|
|
for (retries = 0; retries < SCOM_MAX_RETRIES; retries++) {
|
|
rc = raw_put_scom(scom, value, addr, &status);
|
|
if (rc) {
|
|
/* Try resetting the bridge if FSI fails */
|
|
if (rc != -ENODEV && retries == 0) {
|
|
fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG,
|
|
&dummy, sizeof(uint32_t));
|
|
rc = -EBUSY;
|
|
} else
|
|
return rc;
|
|
} else
|
|
rc = handle_fsi2pib_status(scom, status);
|
|
if (rc && rc != -EBUSY)
|
|
break;
|
|
if (rc == 0) {
|
|
rc = handle_pib_status(scom,
|
|
(status & SCOM_STATUS_PIB_RESP_MASK)
|
|
>> SCOM_STATUS_PIB_RESP_SHIFT);
|
|
if (rc && rc != -EBUSY)
|
|
break;
|
|
}
|
|
if (rc == 0)
|
|
break;
|
|
msleep(1);
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
static int get_scom(struct scom_device *scom, uint64_t *value,
|
|
uint64_t addr)
|
|
{
|
|
uint32_t status, dummy = -1;
|
|
int rc, retries;
|
|
|
|
for (retries = 0; retries < SCOM_MAX_RETRIES; retries++) {
|
|
rc = raw_get_scom(scom, value, addr, &status);
|
|
if (rc) {
|
|
/* Try resetting the bridge if FSI fails */
|
|
if (rc != -ENODEV && retries == 0) {
|
|
fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG,
|
|
&dummy, sizeof(uint32_t));
|
|
rc = -EBUSY;
|
|
} else
|
|
return rc;
|
|
} else
|
|
rc = handle_fsi2pib_status(scom, status);
|
|
if (rc && rc != -EBUSY)
|
|
break;
|
|
if (rc == 0) {
|
|
rc = handle_pib_status(scom,
|
|
(status & SCOM_STATUS_PIB_RESP_MASK)
|
|
>> SCOM_STATUS_PIB_RESP_SHIFT);
|
|
if (rc && rc != -EBUSY)
|
|
break;
|
|
}
|
|
if (rc == 0)
|
|
break;
|
|
msleep(1);
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
static ssize_t scom_read(struct file *filep, char __user *buf, size_t len,
|
|
loff_t *offset)
|
|
{
|
|
struct scom_device *scom = filep->private_data;
|
|
struct device *dev = &scom->fsi_dev->dev;
|
|
uint64_t val;
|
|
int rc;
|
|
|
|
if (len != sizeof(uint64_t))
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&scom->lock);
|
|
if (scom->dead)
|
|
rc = -ENODEV;
|
|
else
|
|
rc = get_scom(scom, &val, *offset);
|
|
mutex_unlock(&scom->lock);
|
|
if (rc) {
|
|
dev_dbg(dev, "get_scom fail:%d\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
rc = copy_to_user(buf, &val, len);
|
|
if (rc)
|
|
dev_dbg(dev, "copy to user failed:%d\n", rc);
|
|
|
|
return rc ? rc : len;
|
|
}
|
|
|
|
static ssize_t scom_write(struct file *filep, const char __user *buf,
|
|
size_t len, loff_t *offset)
|
|
{
|
|
int rc;
|
|
struct scom_device *scom = filep->private_data;
|
|
struct device *dev = &scom->fsi_dev->dev;
|
|
uint64_t val;
|
|
|
|
if (len != sizeof(uint64_t))
|
|
return -EINVAL;
|
|
|
|
rc = copy_from_user(&val, buf, len);
|
|
if (rc) {
|
|
dev_dbg(dev, "copy from user failed:%d\n", rc);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_lock(&scom->lock);
|
|
if (scom->dead)
|
|
rc = -ENODEV;
|
|
else
|
|
rc = put_scom(scom, val, *offset);
|
|
mutex_unlock(&scom->lock);
|
|
if (rc) {
|
|
dev_dbg(dev, "put_scom failed with:%d\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
return len;
|
|
}
|
|
|
|
static loff_t scom_llseek(struct file *file, loff_t offset, int whence)
|
|
{
|
|
switch (whence) {
|
|
case SEEK_CUR:
|
|
break;
|
|
case SEEK_SET:
|
|
file->f_pos = offset;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return offset;
|
|
}
|
|
|
|
static void raw_convert_status(struct scom_access *acc, uint32_t status)
|
|
{
|
|
acc->pib_status = (status & SCOM_STATUS_PIB_RESP_MASK) >>
|
|
SCOM_STATUS_PIB_RESP_SHIFT;
|
|
acc->intf_errors = 0;
|
|
|
|
if (status & SCOM_STATUS_PROTECTION)
|
|
acc->intf_errors |= SCOM_INTF_ERR_PROTECTION;
|
|
else if (status & SCOM_STATUS_PARITY)
|
|
acc->intf_errors |= SCOM_INTF_ERR_PARITY;
|
|
else if (status & SCOM_STATUS_PIB_ABORT)
|
|
acc->intf_errors |= SCOM_INTF_ERR_ABORT;
|
|
else if (status & SCOM_STATUS_ERR_SUMMARY)
|
|
acc->intf_errors |= SCOM_INTF_ERR_UNKNOWN;
|
|
}
|
|
|
|
static int scom_raw_read(struct scom_device *scom, void __user *argp)
|
|
{
|
|
struct scom_access acc;
|
|
uint32_t status;
|
|
int rc;
|
|
|
|
if (copy_from_user(&acc, argp, sizeof(struct scom_access)))
|
|
return -EFAULT;
|
|
|
|
rc = raw_get_scom(scom, &acc.data, acc.addr, &status);
|
|
if (rc)
|
|
return rc;
|
|
raw_convert_status(&acc, status);
|
|
if (copy_to_user(argp, &acc, sizeof(struct scom_access)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
|
|
static int scom_raw_write(struct scom_device *scom, void __user *argp)
|
|
{
|
|
u64 prev_data, mask, data;
|
|
struct scom_access acc;
|
|
uint32_t status;
|
|
int rc;
|
|
|
|
if (copy_from_user(&acc, argp, sizeof(struct scom_access)))
|
|
return -EFAULT;
|
|
|
|
if (acc.mask) {
|
|
rc = raw_get_scom(scom, &prev_data, acc.addr, &status);
|
|
if (rc)
|
|
return rc;
|
|
if (status & SCOM_STATUS_ANY_ERR)
|
|
goto fail;
|
|
mask = acc.mask;
|
|
} else {
|
|
prev_data = mask = -1ull;
|
|
}
|
|
data = (prev_data & ~mask) | (acc.data & mask);
|
|
rc = raw_put_scom(scom, data, acc.addr, &status);
|
|
if (rc)
|
|
return rc;
|
|
fail:
|
|
raw_convert_status(&acc, status);
|
|
if (copy_to_user(argp, &acc, sizeof(struct scom_access)))
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
|
|
static int scom_reset(struct scom_device *scom, void __user *argp)
|
|
{
|
|
uint32_t flags, dummy = -1;
|
|
int rc = 0;
|
|
|
|
if (get_user(flags, (__u32 __user *)argp))
|
|
return -EFAULT;
|
|
if (flags & SCOM_RESET_PIB)
|
|
rc = fsi_device_write(scom->fsi_dev, SCOM_PIB_RESET_REG, &dummy,
|
|
sizeof(uint32_t));
|
|
if (!rc && (flags & (SCOM_RESET_PIB | SCOM_RESET_INTF)))
|
|
rc = fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy,
|
|
sizeof(uint32_t));
|
|
return rc;
|
|
}
|
|
|
|
static int scom_check(struct scom_device *scom, void __user *argp)
|
|
{
|
|
/* Still need to find out how to get "protected" */
|
|
return put_user(SCOM_CHECK_SUPPORTED, (__u32 __user *)argp);
|
|
}
|
|
|
|
static long scom_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct scom_device *scom = file->private_data;
|
|
void __user *argp = (void __user *)arg;
|
|
int rc = -ENOTTY;
|
|
|
|
mutex_lock(&scom->lock);
|
|
if (scom->dead) {
|
|
mutex_unlock(&scom->lock);
|
|
return -ENODEV;
|
|
}
|
|
switch(cmd) {
|
|
case FSI_SCOM_CHECK:
|
|
rc = scom_check(scom, argp);
|
|
break;
|
|
case FSI_SCOM_READ:
|
|
rc = scom_raw_read(scom, argp);
|
|
break;
|
|
case FSI_SCOM_WRITE:
|
|
rc = scom_raw_write(scom, argp);
|
|
break;
|
|
case FSI_SCOM_RESET:
|
|
rc = scom_reset(scom, argp);
|
|
break;
|
|
}
|
|
mutex_unlock(&scom->lock);
|
|
return rc;
|
|
}
|
|
|
|
static int scom_open(struct inode *inode, struct file *file)
|
|
{
|
|
struct scom_device *scom = container_of(inode->i_cdev, struct scom_device, cdev);
|
|
|
|
file->private_data = scom;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct file_operations scom_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = scom_open,
|
|
.llseek = scom_llseek,
|
|
.read = scom_read,
|
|
.write = scom_write,
|
|
.unlocked_ioctl = scom_ioctl,
|
|
};
|
|
|
|
static void scom_free(struct device *dev)
|
|
{
|
|
struct scom_device *scom = container_of(dev, struct scom_device, dev);
|
|
|
|
put_device(&scom->fsi_dev->dev);
|
|
kfree(scom);
|
|
}
|
|
|
|
static int scom_probe(struct device *dev)
|
|
{
|
|
struct fsi_device *fsi_dev = to_fsi_dev(dev);
|
|
struct scom_device *scom;
|
|
int rc, didx;
|
|
|
|
scom = kzalloc(sizeof(*scom), GFP_KERNEL);
|
|
if (!scom)
|
|
return -ENOMEM;
|
|
dev_set_drvdata(dev, scom);
|
|
mutex_init(&scom->lock);
|
|
|
|
/* Grab a reference to the device (parent of our cdev), we'll drop it later */
|
|
if (!get_device(dev)) {
|
|
kfree(scom);
|
|
return -ENODEV;
|
|
}
|
|
scom->fsi_dev = fsi_dev;
|
|
|
|
/* Create chardev for userspace access */
|
|
scom->dev.type = &fsi_cdev_type;
|
|
scom->dev.parent = dev;
|
|
scom->dev.release = scom_free;
|
|
device_initialize(&scom->dev);
|
|
|
|
/* Allocate a minor in the FSI space */
|
|
rc = fsi_get_new_minor(fsi_dev, fsi_dev_scom, &scom->dev.devt, &didx);
|
|
if (rc)
|
|
goto err;
|
|
|
|
dev_set_name(&scom->dev, "scom%d", didx);
|
|
cdev_init(&scom->cdev, &scom_fops);
|
|
rc = cdev_device_add(&scom->cdev, &scom->dev);
|
|
if (rc) {
|
|
dev_err(dev, "Error %d creating char device %s\n",
|
|
rc, dev_name(&scom->dev));
|
|
goto err_free_minor;
|
|
}
|
|
|
|
return 0;
|
|
err_free_minor:
|
|
fsi_free_minor(scom->dev.devt);
|
|
err:
|
|
put_device(&scom->dev);
|
|
return rc;
|
|
}
|
|
|
|
static int scom_remove(struct device *dev)
|
|
{
|
|
struct scom_device *scom = dev_get_drvdata(dev);
|
|
|
|
mutex_lock(&scom->lock);
|
|
scom->dead = true;
|
|
mutex_unlock(&scom->lock);
|
|
cdev_device_del(&scom->cdev, &scom->dev);
|
|
fsi_free_minor(scom->dev.devt);
|
|
put_device(&scom->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct fsi_device_id scom_ids[] = {
|
|
{
|
|
.engine_type = FSI_ENGID_SCOM,
|
|
.version = FSI_VERSION_ANY,
|
|
},
|
|
{ 0 }
|
|
};
|
|
|
|
static struct fsi_driver scom_drv = {
|
|
.id_table = scom_ids,
|
|
.drv = {
|
|
.name = "scom",
|
|
.bus = &fsi_bus_type,
|
|
.probe = scom_probe,
|
|
.remove = scom_remove,
|
|
}
|
|
};
|
|
|
|
static int scom_init(void)
|
|
{
|
|
return fsi_driver_register(&scom_drv);
|
|
}
|
|
|
|
static void scom_exit(void)
|
|
{
|
|
fsi_driver_unregister(&scom_drv);
|
|
}
|
|
|
|
module_init(scom_init);
|
|
module_exit(scom_exit);
|
|
MODULE_LICENSE("GPL");
|