WSL2-Linux-Kernel/arch/mn10300/mm/cache-flush-by-reg.S

309 строки
7.6 KiB
ArmAsm

/* MN10300 CPU core caching routines, using indirect regs on cache controller
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/sys.h>
#include <linux/linkage.h>
#include <asm/smp.h>
#include <asm/page.h>
#include <asm/cache.h>
#include <asm/irqflags.h>
.am33_2
#ifndef CONFIG_SMP
.globl mn10300_dcache_flush
.globl mn10300_dcache_flush_page
.globl mn10300_dcache_flush_range
.globl mn10300_dcache_flush_range2
.globl mn10300_dcache_flush_inv
.globl mn10300_dcache_flush_inv_page
.globl mn10300_dcache_flush_inv_range
.globl mn10300_dcache_flush_inv_range2
mn10300_dcache_flush = mn10300_local_dcache_flush
mn10300_dcache_flush_page = mn10300_local_dcache_flush_page
mn10300_dcache_flush_range = mn10300_local_dcache_flush_range
mn10300_dcache_flush_range2 = mn10300_local_dcache_flush_range2
mn10300_dcache_flush_inv = mn10300_local_dcache_flush_inv
mn10300_dcache_flush_inv_page = mn10300_local_dcache_flush_inv_page
mn10300_dcache_flush_inv_range = mn10300_local_dcache_flush_inv_range
mn10300_dcache_flush_inv_range2 = mn10300_local_dcache_flush_inv_range2
#endif /* !CONFIG_SMP */
###############################################################################
#
# void mn10300_local_dcache_flush(void)
# Flush the entire data cache back to RAM
#
###############################################################################
ALIGN
.globl mn10300_local_dcache_flush
.type mn10300_local_dcache_flush,@function
mn10300_local_dcache_flush:
movhu (CHCTR),d0
btst CHCTR_DCEN,d0
beq mn10300_local_dcache_flush_end
mov DCPGCR,a0
LOCAL_CLI_SAVE(d1)
# wait for busy bit of area purge
setlb
mov (a0),d0
btst DCPGCR_DCPGBSY,d0
lne
# set mask
clr d0
mov d0,(DCPGMR)
# area purge
#
# DCPGCR = DCPGCR_DCP
#
mov DCPGCR_DCP,d0
mov d0,(a0)
# wait for busy bit of area purge
setlb
mov (a0),d0
btst DCPGCR_DCPGBSY,d0
lne
LOCAL_IRQ_RESTORE(d1)
mn10300_local_dcache_flush_end:
ret [],0
.size mn10300_local_dcache_flush,.-mn10300_local_dcache_flush
###############################################################################
#
# void mn10300_local_dcache_flush_page(unsigned long start)
# void mn10300_local_dcache_flush_range(unsigned long start, unsigned long end)
# void mn10300_local_dcache_flush_range2(unsigned long start, unsigned long size)
# Flush a range of addresses on a page in the dcache
#
###############################################################################
ALIGN
.globl mn10300_local_dcache_flush_page
.globl mn10300_local_dcache_flush_range
.globl mn10300_local_dcache_flush_range2
.type mn10300_local_dcache_flush_page,@function
.type mn10300_local_dcache_flush_range,@function
.type mn10300_local_dcache_flush_range2,@function
mn10300_local_dcache_flush_page:
and ~(PAGE_SIZE-1),d0
mov PAGE_SIZE,d1
mn10300_local_dcache_flush_range2:
add d0,d1
mn10300_local_dcache_flush_range:
movm [d2,d3,a2],(sp)
movhu (CHCTR),d2
btst CHCTR_DCEN,d2
beq mn10300_local_dcache_flush_range_end
# calculate alignsize
#
# alignsize = L1_CACHE_BYTES;
# for (i = (end - start - 1) / L1_CACHE_BYTES ; i > 0; i >>= 1)
# alignsize <<= 1;
# d2 = alignsize;
#
mov L1_CACHE_BYTES,d2
sub d0,d1,d3
add -1,d3
lsr L1_CACHE_SHIFT,d3
beq 2f
1:
add d2,d2
lsr 1,d3
bne 1b
2:
mov d1,a1 # a1 = end
LOCAL_CLI_SAVE(d3)
mov DCPGCR,a0
# wait for busy bit of area purge
setlb
mov (a0),d1
btst DCPGCR_DCPGBSY,d1
lne
# determine the mask
mov d2,d1
add -1,d1
not d1 # d1 = mask = ~(alignsize-1)
mov d1,(DCPGMR)
and d1,d0,a2 # a2 = mask & start
dcpgloop:
# area purge
mov a2,d0
or DCPGCR_DCP,d0
mov d0,(a0) # DCPGCR = (mask & start) | DCPGCR_DCP
# wait for busy bit of area purge
setlb
mov (a0),d1
btst DCPGCR_DCPGBSY,d1
lne
# check purge of end address
add d2,a2 # a2 += alignsize
cmp a1,a2 # if (a2 < end) goto dcpgloop
bns dcpgloop
LOCAL_IRQ_RESTORE(d3)
mn10300_local_dcache_flush_range_end:
ret [d2,d3,a2],12
.size mn10300_local_dcache_flush_page,.-mn10300_local_dcache_flush_page
.size mn10300_local_dcache_flush_range,.-mn10300_local_dcache_flush_range
.size mn10300_local_dcache_flush_range2,.-mn10300_local_dcache_flush_range2
###############################################################################
#
# void mn10300_local_dcache_flush_inv(void)
# Flush the entire data cache and invalidate all entries
#
###############################################################################
ALIGN
.globl mn10300_local_dcache_flush_inv
.type mn10300_local_dcache_flush_inv,@function
mn10300_local_dcache_flush_inv:
movhu (CHCTR),d0
btst CHCTR_DCEN,d0
beq mn10300_local_dcache_flush_inv_end
mov DCPGCR,a0
LOCAL_CLI_SAVE(d1)
# wait for busy bit of area purge & invalidate
setlb
mov (a0),d0
btst DCPGCR_DCPGBSY,d0
lne
# set the mask to cover everything
clr d0
mov d0,(DCPGMR)
# area purge & invalidate
mov DCPGCR_DCP|DCPGCR_DCI,d0
mov d0,(a0)
# wait for busy bit of area purge & invalidate
setlb
mov (a0),d0
btst DCPGCR_DCPGBSY,d0
lne
LOCAL_IRQ_RESTORE(d1)
mn10300_local_dcache_flush_inv_end:
ret [],0
.size mn10300_local_dcache_flush_inv,.-mn10300_local_dcache_flush_inv
###############################################################################
#
# void mn10300_local_dcache_flush_inv_page(unsigned long start)
# void mn10300_local_dcache_flush_inv_range(unsigned long start, unsigned long end)
# void mn10300_local_dcache_flush_inv_range2(unsigned long start, unsigned long size)
# Flush and invalidate a range of addresses on a page in the dcache
#
###############################################################################
ALIGN
.globl mn10300_local_dcache_flush_inv_page
.globl mn10300_local_dcache_flush_inv_range
.globl mn10300_local_dcache_flush_inv_range2
.type mn10300_local_dcache_flush_inv_page,@function
.type mn10300_local_dcache_flush_inv_range,@function
.type mn10300_local_dcache_flush_inv_range2,@function
mn10300_local_dcache_flush_inv_page:
and ~(PAGE_SIZE-1),d0
mov PAGE_SIZE,d1
mn10300_local_dcache_flush_inv_range2:
add d0,d1
mn10300_local_dcache_flush_inv_range:
movm [d2,d3,a2],(sp)
movhu (CHCTR),d2
btst CHCTR_DCEN,d2
beq mn10300_local_dcache_flush_inv_range_end
# calculate alignsize
#
# alignsize = L1_CACHE_BYTES;
# for (i = (end - start - 1) / L1_CACHE_BYTES; i > 0; i >>= 1)
# alignsize <<= 1;
# d2 = alignsize
#
mov L1_CACHE_BYTES,d2
sub d0,d1,d3
add -1,d3
lsr L1_CACHE_SHIFT,d3
beq 2f
1:
add d2,d2
lsr 1,d3
bne 1b
2:
mov d1,a1 # a1 = end
LOCAL_CLI_SAVE(d3)
mov DCPGCR,a0
# wait for busy bit of area purge & invalidate
setlb
mov (a0),d1
btst DCPGCR_DCPGBSY,d1
lne
# set the mask
mov d2,d1
add -1,d1
not d1 # d1 = mask = ~(alignsize-1)
mov d1,(DCPGMR)
and d1,d0,a2 # a2 = mask & start
dcpgivloop:
# area purge & invalidate
mov a2,d0
or DCPGCR_DCP|DCPGCR_DCI,d0
mov d0,(a0) # DCPGCR = (mask & start)|DCPGCR_DCP|DCPGCR_DCI
# wait for busy bit of area purge & invalidate
setlb
mov (a0),d1
btst DCPGCR_DCPGBSY,d1
lne
# check purge & invalidate of end address
add d2,a2 # a2 += alignsize
cmp a1,a2 # if (a2 < end) goto dcpgivloop
bns dcpgivloop
LOCAL_IRQ_RESTORE(d3)
mn10300_local_dcache_flush_inv_range_end:
ret [d2,d3,a2],12
.size mn10300_local_dcache_flush_inv_page,.-mn10300_local_dcache_flush_inv_page
.size mn10300_local_dcache_flush_inv_range,.-mn10300_local_dcache_flush_inv_range
.size mn10300_local_dcache_flush_inv_range2,.-mn10300_local_dcache_flush_inv_range2