WSL2-Linux-Kernel/arch/x86/kernel/setup_percpu.c

288 строки
7.9 KiB
C

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/percpu.h>
#include <linux/kexec.h>
#include <linux/crash_dump.h>
#include <linux/smp.h>
#include <linux/topology.h>
#include <linux/pfn.h>
#include <asm/sections.h>
#include <asm/processor.h>
#include <asm/setup.h>
#include <asm/mpspec.h>
#include <asm/apicdef.h>
#include <asm/highmem.h>
#include <asm/proto.h>
#include <asm/cpumask.h>
#include <asm/cpu.h>
#include <asm/stackprotector.h>
DEFINE_PER_CPU_READ_MOSTLY(int, cpu_number);
EXPORT_PER_CPU_SYMBOL(cpu_number);
#ifdef CONFIG_X86_64
#define BOOT_PERCPU_OFFSET ((unsigned long)__per_cpu_load)
#else
#define BOOT_PERCPU_OFFSET 0
#endif
DEFINE_PER_CPU(unsigned long, this_cpu_off) = BOOT_PERCPU_OFFSET;
EXPORT_PER_CPU_SYMBOL(this_cpu_off);
unsigned long __per_cpu_offset[NR_CPUS] __read_mostly = {
[0 ... NR_CPUS-1] = BOOT_PERCPU_OFFSET,
};
EXPORT_SYMBOL(__per_cpu_offset);
/*
* On x86_64 symbols referenced from code should be reachable using
* 32bit relocations. Reserve space for static percpu variables in
* modules so that they are always served from the first chunk which
* is located at the percpu segment base. On x86_32, anything can
* address anywhere. No need to reserve space in the first chunk.
*/
#ifdef CONFIG_X86_64
#define PERCPU_FIRST_CHUNK_RESERVE PERCPU_MODULE_RESERVE
#else
#define PERCPU_FIRST_CHUNK_RESERVE 0
#endif
#ifdef CONFIG_X86_32
/**
* pcpu_need_numa - determine percpu allocation needs to consider NUMA
*
* If NUMA is not configured or there is only one NUMA node available,
* there is no reason to consider NUMA. This function determines
* whether percpu allocation should consider NUMA or not.
*
* RETURNS:
* true if NUMA should be considered; otherwise, false.
*/
static bool __init pcpu_need_numa(void)
{
#ifdef CONFIG_NEED_MULTIPLE_NODES
pg_data_t *last = NULL;
unsigned int cpu;
for_each_possible_cpu(cpu) {
int node = early_cpu_to_node(cpu);
if (node_online(node) && NODE_DATA(node) &&
last && last != NODE_DATA(node))
return true;
last = NODE_DATA(node);
}
#endif
return false;
}
#endif
/**
* pcpu_alloc_bootmem - NUMA friendly alloc_bootmem wrapper for percpu
* @cpu: cpu to allocate for
* @size: size allocation in bytes
* @align: alignment
*
* Allocate @size bytes aligned at @align for cpu @cpu. This wrapper
* does the right thing for NUMA regardless of the current
* configuration.
*
* RETURNS:
* Pointer to the allocated area on success, NULL on failure.
*/
static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
unsigned long align)
{
const unsigned long goal = __pa(MAX_DMA_ADDRESS);
#ifdef CONFIG_NEED_MULTIPLE_NODES
int node = early_cpu_to_node(cpu);
void *ptr;
if (!node_online(node) || !NODE_DATA(node)) {
ptr = __alloc_bootmem_nopanic(size, align, goal);
pr_info("cpu %d has no node %d or node-local memory\n",
cpu, node);
pr_debug("per cpu data for cpu%d %lu bytes at %016lx\n",
cpu, size, __pa(ptr));
} else {
ptr = __alloc_bootmem_node_nopanic(NODE_DATA(node),
size, align, goal);
pr_debug("per cpu data for cpu%d %lu bytes on node%d at %016lx\n",
cpu, size, node, __pa(ptr));
}
return ptr;
#else
return __alloc_bootmem_nopanic(size, align, goal);
#endif
}
/*
* Helpers for first chunk memory allocation
*/
static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align)
{
return pcpu_alloc_bootmem(cpu, size, align);
}
static void __init pcpu_fc_free(void *ptr, size_t size)
{
free_bootmem(__pa(ptr), size);
}
static int __init pcpu_cpu_distance(unsigned int from, unsigned int to)
{
#ifdef CONFIG_NEED_MULTIPLE_NODES
if (early_cpu_to_node(from) == early_cpu_to_node(to))
return LOCAL_DISTANCE;
else
return REMOTE_DISTANCE;
#else
return LOCAL_DISTANCE;
#endif
}
static void __init pcpup_populate_pte(unsigned long addr)
{
populate_extra_pte(addr);
}
static inline void setup_percpu_segment(int cpu)
{
#ifdef CONFIG_X86_32
struct desc_struct gdt;
pack_descriptor(&gdt, per_cpu_offset(cpu), 0xFFFFF,
0x2 | DESCTYPE_S, 0x8);
gdt.s = 1;
write_gdt_entry(get_cpu_gdt_table(cpu),
GDT_ENTRY_PERCPU, &gdt, DESCTYPE_S);
#endif
}
void __init setup_per_cpu_areas(void)
{
unsigned int cpu;
unsigned long delta;
int rc;
pr_info("NR_CPUS:%d nr_cpumask_bits:%d nr_cpu_ids:%d nr_node_ids:%d\n",
NR_CPUS, nr_cpumask_bits, nr_cpu_ids, nr_node_ids);
/*
* Allocate percpu area. Embedding allocator is our favorite;
* however, on NUMA configurations, it can result in very
* sparse unit mapping and vmalloc area isn't spacious enough
* on 32bit. Use page in that case.
*/
#ifdef CONFIG_X86_32
if (pcpu_chosen_fc == PCPU_FC_AUTO && pcpu_need_numa())
pcpu_chosen_fc = PCPU_FC_PAGE;
#endif
rc = -EINVAL;
if (pcpu_chosen_fc != PCPU_FC_PAGE) {
const size_t dyn_size = PERCPU_MODULE_RESERVE +
PERCPU_DYNAMIC_RESERVE - PERCPU_FIRST_CHUNK_RESERVE;
size_t atom_size;
/*
* On 64bit, use PMD_SIZE for atom_size so that embedded
* percpu areas are aligned to PMD. This, in the future,
* can also allow using PMD mappings in vmalloc area. Use
* PAGE_SIZE on 32bit as vmalloc space is highly contended
* and large vmalloc area allocs can easily fail.
*/
#ifdef CONFIG_X86_64
atom_size = PMD_SIZE;
#else
atom_size = PAGE_SIZE;
#endif
rc = pcpu_embed_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
dyn_size, atom_size,
pcpu_cpu_distance,
pcpu_fc_alloc, pcpu_fc_free);
if (rc < 0)
pr_warning("%s allocator failed (%d), falling back to page size\n",
pcpu_fc_names[pcpu_chosen_fc], rc);
}
if (rc < 0)
rc = pcpu_page_first_chunk(PERCPU_FIRST_CHUNK_RESERVE,
pcpu_fc_alloc, pcpu_fc_free,
pcpup_populate_pte);
if (rc < 0)
panic("cannot initialize percpu area (err=%d)", rc);
/* alrighty, percpu areas up and running */
delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
for_each_possible_cpu(cpu) {
per_cpu_offset(cpu) = delta + pcpu_unit_offsets[cpu];
per_cpu(this_cpu_off, cpu) = per_cpu_offset(cpu);
per_cpu(cpu_number, cpu) = cpu;
setup_percpu_segment(cpu);
setup_stack_canary_segment(cpu);
/*
* Copy data used in early init routines from the
* initial arrays to the per cpu data areas. These
* arrays then become expendable and the *_early_ptr's
* are zeroed indicating that the static arrays are
* gone.
*/
#ifdef CONFIG_X86_LOCAL_APIC
per_cpu(x86_cpu_to_apicid, cpu) =
early_per_cpu_map(x86_cpu_to_apicid, cpu);
per_cpu(x86_bios_cpu_apicid, cpu) =
early_per_cpu_map(x86_bios_cpu_apicid, cpu);
#endif
#ifdef CONFIG_X86_32
per_cpu(x86_cpu_to_logical_apicid, cpu) =
early_per_cpu_map(x86_cpu_to_logical_apicid, cpu);
#endif
#ifdef CONFIG_X86_64
per_cpu(irq_stack_ptr, cpu) =
per_cpu(irq_stack_union.irq_stack, cpu) +
IRQ_STACK_SIZE - 64;
#endif
#ifdef CONFIG_NUMA
per_cpu(x86_cpu_to_node_map, cpu) =
early_per_cpu_map(x86_cpu_to_node_map, cpu);
/*
* Ensure that the boot cpu numa_node is correct when the boot
* cpu is on a node that doesn't have memory installed.
* Also cpu_up() will call cpu_to_node() for APs when
* MEMORY_HOTPLUG is defined, before per_cpu(numa_node) is set
* up later with c_init aka intel_init/amd_init.
* So set them all (boot cpu and all APs).
*/
set_cpu_numa_node(cpu, early_cpu_to_node(cpu));
#endif
/*
* Up to this point, the boot CPU has been using .init.data
* area. Reload any changed state for the boot CPU.
*/
if (!cpu)
switch_to_new_gdt(cpu);
}
/* indicate the early static arrays will soon be gone */
#ifdef CONFIG_X86_LOCAL_APIC
early_per_cpu_ptr(x86_cpu_to_apicid) = NULL;
early_per_cpu_ptr(x86_bios_cpu_apicid) = NULL;
#endif
#ifdef CONFIG_X86_32
early_per_cpu_ptr(x86_cpu_to_logical_apicid) = NULL;
#endif
#ifdef CONFIG_NUMA
early_per_cpu_ptr(x86_cpu_to_node_map) = NULL;
#endif
/* Setup node to cpumask map */
setup_node_to_cpumask_map();
/* Setup cpu initialized, callin, callout masks */
setup_cpu_local_masks();
}