472 строки
11 KiB
ArmAsm
472 строки
11 KiB
ArmAsm
/*
|
|
L2CR functions
|
|
Copyright © 1997-1998 by PowerLogix R & D, Inc.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
/*
|
|
Thur, Dec. 12, 1998.
|
|
- First public release, contributed by PowerLogix.
|
|
***********
|
|
Sat, Aug. 7, 1999.
|
|
- Terry: Made sure code disabled interrupts before running. (Previously
|
|
it was assumed interrupts were already disabled).
|
|
- Terry: Updated for tentative G4 support. 4MB of memory is now flushed
|
|
instead of 2MB. (Prob. only 3 is necessary).
|
|
- Terry: Updated for workaround to HID0[DPM] processor bug
|
|
during global invalidates.
|
|
***********
|
|
Thu, July 13, 2000.
|
|
- Terry: Added isync to correct for an errata.
|
|
|
|
22 August 2001.
|
|
- DanM: Finally added the 7450 patch I've had for the past
|
|
several months. The L2CR is similar, but I'm going
|
|
to assume the user of this functions knows what they
|
|
are doing.
|
|
|
|
Author: Terry Greeniaus (tgree@phys.ualberta.ca)
|
|
Please e-mail updates to this file to me, thanks!
|
|
*/
|
|
#include <asm/processor.h>
|
|
#include <asm/cputable.h>
|
|
#include <asm/ppc_asm.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/page.h>
|
|
#include <asm/feature-fixups.h>
|
|
|
|
/* Usage:
|
|
|
|
When setting the L2CR register, you must do a few special
|
|
things. If you are enabling the cache, you must perform a
|
|
global invalidate. If you are disabling the cache, you must
|
|
flush the cache contents first. This routine takes care of
|
|
doing these things. When first enabling the cache, make sure
|
|
you pass in the L2CR you want, as well as passing in the
|
|
global invalidate bit set. A global invalidate will only be
|
|
performed if the L2I bit is set in applyThis. When enabling
|
|
the cache, you should also set the L2E bit in applyThis. If
|
|
you want to modify the L2CR contents after the cache has been
|
|
enabled, the recommended procedure is to first call
|
|
__setL2CR(0) to disable the cache and then call it again with
|
|
the new values for L2CR. Examples:
|
|
|
|
_setL2CR(0) - disables the cache
|
|
_setL2CR(0xB3A04000) - enables my G3 upgrade card:
|
|
- L2E set to turn on the cache
|
|
- L2SIZ set to 1MB
|
|
- L2CLK set to 1:1
|
|
- L2RAM set to pipelined synchronous late-write
|
|
- L2I set to perform a global invalidation
|
|
- L2OH set to 0.5 nS
|
|
- L2DF set because this upgrade card
|
|
requires it
|
|
|
|
A similar call should work for your card. You need to know
|
|
the correct setting for your card and then place them in the
|
|
fields I have outlined above. Other fields support optional
|
|
features, such as L2DO which caches only data, or L2TS which
|
|
causes cache pushes from the L1 cache to go to the L2 cache
|
|
instead of to main memory.
|
|
|
|
IMPORTANT:
|
|
Starting with the 7450, the bits in this register have moved
|
|
or behave differently. The Enable, Parity Enable, Size,
|
|
and L2 Invalidate are the only bits that have not moved.
|
|
The size is read-only for these processors with internal L2
|
|
cache, and the invalidate is a control as well as status.
|
|
-- Dan
|
|
|
|
*/
|
|
/*
|
|
* Summary: this procedure ignores the L2I bit in the value passed in,
|
|
* flushes the cache if it was already enabled, always invalidates the
|
|
* cache, then enables the cache if the L2E bit is set in the value
|
|
* passed in.
|
|
* -- paulus.
|
|
*/
|
|
_GLOBAL(_set_L2CR)
|
|
/* Make sure this is a 750 or 7400 chip */
|
|
BEGIN_FTR_SECTION
|
|
li r3,-1
|
|
blr
|
|
END_FTR_SECTION_IFCLR(CPU_FTR_L2CR)
|
|
|
|
mflr r9
|
|
|
|
/* Stop DST streams */
|
|
BEGIN_FTR_SECTION
|
|
DSSALL
|
|
sync
|
|
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
|
|
|
|
/* Turn off interrupts and data relocation. */
|
|
mfmsr r7 /* Save MSR in r7 */
|
|
rlwinm r4,r7,0,17,15
|
|
rlwinm r4,r4,0,28,26 /* Turn off DR bit */
|
|
sync
|
|
mtmsr r4
|
|
isync
|
|
|
|
/* Before we perform the global invalidation, we must disable dynamic
|
|
* power management via HID0[DPM] to work around a processor bug where
|
|
* DPM can possibly interfere with the state machine in the processor
|
|
* that invalidates the L2 cache tags.
|
|
*/
|
|
mfspr r8,SPRN_HID0 /* Save HID0 in r8 */
|
|
rlwinm r4,r8,0,12,10 /* Turn off HID0[DPM] */
|
|
sync
|
|
mtspr SPRN_HID0,r4 /* Disable DPM */
|
|
sync
|
|
|
|
/* Get the current enable bit of the L2CR into r4 */
|
|
mfspr r4,SPRN_L2CR
|
|
|
|
/* Tweak some bits */
|
|
rlwinm r5,r3,0,0,0 /* r5 contains the new enable bit */
|
|
rlwinm r3,r3,0,11,9 /* Turn off the invalidate bit */
|
|
rlwinm r3,r3,0,1,31 /* Turn off the enable bit */
|
|
|
|
/* Check to see if we need to flush */
|
|
rlwinm. r4,r4,0,0,0
|
|
beq 2f
|
|
|
|
/* Flush the cache. First, read the first 4MB of memory (physical) to
|
|
* put new data in the cache. (Actually we only need
|
|
* the size of the L2 cache plus the size of the L1 cache, but 4MB will
|
|
* cover everything just to be safe).
|
|
*/
|
|
|
|
/**** Might be a good idea to set L2DO here - to prevent instructions
|
|
from getting into the cache. But since we invalidate
|
|
the next time we enable the cache it doesn't really matter.
|
|
Don't do this unless you accommodate all processor variations.
|
|
The bit moved on the 7450.....
|
|
****/
|
|
|
|
BEGIN_FTR_SECTION
|
|
/* Disable L2 prefetch on some 745x and try to ensure
|
|
* L2 prefetch engines are idle. As explained by errata
|
|
* text, we can't be sure they are, we just hope very hard
|
|
* that well be enough (sic !). At least I noticed Apple
|
|
* doesn't even bother doing the dcbf's here...
|
|
*/
|
|
mfspr r4,SPRN_MSSCR0
|
|
rlwinm r4,r4,0,0,29
|
|
sync
|
|
mtspr SPRN_MSSCR0,r4
|
|
sync
|
|
isync
|
|
lis r4,KERNELBASE@h
|
|
dcbf 0,r4
|
|
dcbf 0,r4
|
|
dcbf 0,r4
|
|
dcbf 0,r4
|
|
END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450)
|
|
|
|
/* TODO: use HW flush assist when available */
|
|
|
|
lis r4,0x0002
|
|
mtctr r4
|
|
li r4,0
|
|
1:
|
|
lwzx r0,0,r4
|
|
addi r4,r4,32 /* Go to start of next cache line */
|
|
bdnz 1b
|
|
isync
|
|
|
|
/* Now, flush the first 4MB of memory */
|
|
lis r4,0x0002
|
|
mtctr r4
|
|
li r4,0
|
|
sync
|
|
1:
|
|
dcbf 0,r4
|
|
addi r4,r4,32 /* Go to start of next cache line */
|
|
bdnz 1b
|
|
|
|
2:
|
|
/* Set up the L2CR configuration bits (and switch L2 off) */
|
|
/* CPU errata: Make sure the mtspr below is already in the
|
|
* L1 icache
|
|
*/
|
|
b 20f
|
|
.balign L1_CACHE_BYTES
|
|
22:
|
|
sync
|
|
mtspr SPRN_L2CR,r3
|
|
sync
|
|
b 23f
|
|
20:
|
|
b 21f
|
|
21: sync
|
|
isync
|
|
b 22b
|
|
|
|
23:
|
|
/* Perform a global invalidation */
|
|
oris r3,r3,0x0020
|
|
sync
|
|
mtspr SPRN_L2CR,r3
|
|
sync
|
|
isync /* For errata */
|
|
|
|
BEGIN_FTR_SECTION
|
|
/* On the 7450, we wait for the L2I bit to clear......
|
|
*/
|
|
10: mfspr r3,SPRN_L2CR
|
|
andis. r4,r3,0x0020
|
|
bne 10b
|
|
b 11f
|
|
END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450)
|
|
|
|
/* Wait for the invalidation to complete */
|
|
3: mfspr r3,SPRN_L2CR
|
|
rlwinm. r4,r3,0,31,31
|
|
bne 3b
|
|
|
|
11: rlwinm r3,r3,0,11,9 /* Turn off the L2I bit */
|
|
sync
|
|
mtspr SPRN_L2CR,r3
|
|
sync
|
|
|
|
/* See if we need to enable the cache */
|
|
cmplwi r5,0
|
|
beq 4f
|
|
|
|
/* Enable the cache */
|
|
oris r3,r3,0x8000
|
|
mtspr SPRN_L2CR,r3
|
|
sync
|
|
|
|
/* Enable L2 HW prefetch on 744x/745x */
|
|
BEGIN_FTR_SECTION
|
|
mfspr r3,SPRN_MSSCR0
|
|
ori r3,r3,3
|
|
sync
|
|
mtspr SPRN_MSSCR0,r3
|
|
sync
|
|
isync
|
|
END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450)
|
|
4:
|
|
|
|
/* Restore HID0[DPM] to whatever it was before */
|
|
sync
|
|
mtspr 1008,r8
|
|
sync
|
|
|
|
/* Restore MSR (restores EE and DR bits to original state) */
|
|
SYNC
|
|
mtmsr r7
|
|
isync
|
|
|
|
mtlr r9
|
|
blr
|
|
|
|
_GLOBAL(_get_L2CR)
|
|
/* Return the L2CR contents */
|
|
li r3,0
|
|
BEGIN_FTR_SECTION
|
|
mfspr r3,SPRN_L2CR
|
|
END_FTR_SECTION_IFSET(CPU_FTR_L2CR)
|
|
blr
|
|
|
|
|
|
/*
|
|
* Here is a similar routine for dealing with the L3 cache
|
|
* on the 745x family of chips
|
|
*/
|
|
|
|
_GLOBAL(_set_L3CR)
|
|
/* Make sure this is a 745x chip */
|
|
BEGIN_FTR_SECTION
|
|
li r3,-1
|
|
blr
|
|
END_FTR_SECTION_IFCLR(CPU_FTR_L3CR)
|
|
|
|
/* Turn off interrupts and data relocation. */
|
|
mfmsr r7 /* Save MSR in r7 */
|
|
rlwinm r4,r7,0,17,15
|
|
rlwinm r4,r4,0,28,26 /* Turn off DR bit */
|
|
sync
|
|
mtmsr r4
|
|
isync
|
|
|
|
/* Stop DST streams */
|
|
DSSALL
|
|
sync
|
|
|
|
/* Get the current enable bit of the L3CR into r4 */
|
|
mfspr r4,SPRN_L3CR
|
|
|
|
/* Tweak some bits */
|
|
rlwinm r5,r3,0,0,0 /* r5 contains the new enable bit */
|
|
rlwinm r3,r3,0,22,20 /* Turn off the invalidate bit */
|
|
rlwinm r3,r3,0,2,31 /* Turn off the enable & PE bits */
|
|
rlwinm r3,r3,0,5,3 /* Turn off the clken bit */
|
|
/* Check to see if we need to flush */
|
|
rlwinm. r4,r4,0,0,0
|
|
beq 2f
|
|
|
|
/* Flush the cache.
|
|
*/
|
|
|
|
/* TODO: use HW flush assist */
|
|
|
|
lis r4,0x0008
|
|
mtctr r4
|
|
li r4,0
|
|
1:
|
|
lwzx r0,0,r4
|
|
dcbf 0,r4
|
|
addi r4,r4,32 /* Go to start of next cache line */
|
|
bdnz 1b
|
|
|
|
2:
|
|
/* Set up the L3CR configuration bits (and switch L3 off) */
|
|
sync
|
|
mtspr SPRN_L3CR,r3
|
|
sync
|
|
|
|
oris r3,r3,L3CR_L3RES@h /* Set reserved bit 5 */
|
|
mtspr SPRN_L3CR,r3
|
|
sync
|
|
oris r3,r3,L3CR_L3CLKEN@h /* Set clken */
|
|
mtspr SPRN_L3CR,r3
|
|
sync
|
|
|
|
/* Wait for stabilize */
|
|
li r0,256
|
|
mtctr r0
|
|
1: bdnz 1b
|
|
|
|
/* Perform a global invalidation */
|
|
ori r3,r3,0x0400
|
|
sync
|
|
mtspr SPRN_L3CR,r3
|
|
sync
|
|
isync
|
|
|
|
/* We wait for the L3I bit to clear...... */
|
|
10: mfspr r3,SPRN_L3CR
|
|
andi. r4,r3,0x0400
|
|
bne 10b
|
|
|
|
/* Clear CLKEN */
|
|
rlwinm r3,r3,0,5,3 /* Turn off the clken bit */
|
|
mtspr SPRN_L3CR,r3
|
|
sync
|
|
|
|
/* Wait for stabilize */
|
|
li r0,256
|
|
mtctr r0
|
|
1: bdnz 1b
|
|
|
|
/* See if we need to enable the cache */
|
|
cmplwi r5,0
|
|
beq 4f
|
|
|
|
/* Enable the cache */
|
|
oris r3,r3,(L3CR_L3E | L3CR_L3CLKEN)@h
|
|
mtspr SPRN_L3CR,r3
|
|
sync
|
|
|
|
/* Wait for stabilize */
|
|
li r0,256
|
|
mtctr r0
|
|
1: bdnz 1b
|
|
|
|
/* Restore MSR (restores EE and DR bits to original state) */
|
|
4: SYNC
|
|
mtmsr r7
|
|
isync
|
|
blr
|
|
|
|
_GLOBAL(_get_L3CR)
|
|
/* Return the L3CR contents */
|
|
li r3,0
|
|
BEGIN_FTR_SECTION
|
|
mfspr r3,SPRN_L3CR
|
|
END_FTR_SECTION_IFSET(CPU_FTR_L3CR)
|
|
blr
|
|
|
|
/* --- End of PowerLogix code ---
|
|
*/
|
|
|
|
|
|
/* flush_disable_L1() - Flush and disable L1 cache
|
|
*
|
|
* clobbers r0, r3, ctr, cr0
|
|
* Must be called with interrupts disabled and MMU enabled.
|
|
*/
|
|
_GLOBAL(__flush_disable_L1)
|
|
/* Stop pending alitvec streams and memory accesses */
|
|
BEGIN_FTR_SECTION
|
|
DSSALL
|
|
END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
|
|
sync
|
|
|
|
/* Load counter to 0x4000 cache lines (512k) and
|
|
* load cache with datas
|
|
*/
|
|
li r3,0x4000 /* 512kB / 32B */
|
|
mtctr r3
|
|
lis r3,KERNELBASE@h
|
|
1:
|
|
lwz r0,0(r3)
|
|
addi r3,r3,0x0020 /* Go to start of next cache line */
|
|
bdnz 1b
|
|
isync
|
|
sync
|
|
|
|
/* Now flush those cache lines */
|
|
li r3,0x4000 /* 512kB / 32B */
|
|
mtctr r3
|
|
lis r3,KERNELBASE@h
|
|
1:
|
|
dcbf 0,r3
|
|
addi r3,r3,0x0020 /* Go to start of next cache line */
|
|
bdnz 1b
|
|
sync
|
|
|
|
/* We can now disable the L1 cache (HID0:DCE, HID0:ICE) */
|
|
mfspr r3,SPRN_HID0
|
|
rlwinm r3,r3,0,18,15
|
|
mtspr SPRN_HID0,r3
|
|
sync
|
|
isync
|
|
blr
|
|
|
|
/* inval_enable_L1 - Invalidate and enable L1 cache
|
|
*
|
|
* Assumes L1 is already disabled and MSR:EE is off
|
|
*
|
|
* clobbers r3
|
|
*/
|
|
_GLOBAL(__inval_enable_L1)
|
|
/* Enable and then Flash inval the instruction & data cache */
|
|
mfspr r3,SPRN_HID0
|
|
ori r3,r3, HID0_ICE|HID0_ICFI|HID0_DCE|HID0_DCI
|
|
sync
|
|
isync
|
|
mtspr SPRN_HID0,r3
|
|
xori r3,r3, HID0_ICFI|HID0_DCI
|
|
mtspr SPRN_HID0,r3
|
|
sync
|
|
|
|
blr
|
|
|
|
|