WSL2-Linux-Kernel/arch/microblaze
Bjorn Helgaas 237865f195 PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code"
Revert dff22d2054 ("PCI: Call pci_read_bridge_bases() from core instead
of arch code").

Reading PCI bridge windows is not arch-specific in itself, but there is PCI
core code that doesn't work correctly if we read them too early.  For
example, Hannes found this case on an ARM Freescale i.mx6 board:

  pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff]
  pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  pci 0000:00:00.0: BAR 8: no space for [mem size 0x01000000] (mem window)
  pci 0000:01:00.0: BAR 2: failed to assign [mem size 0x00200000]
  pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x00004000]
  pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x00000100]

The 00:00.0 mem window needs to be at least 3MB: the 01:00.0 device needs
0x204100 of space, and mem windows are megabyte-aligned.

Bus sizing can increase a bridge window size, but never *decrease* it (see
d65245c329 ("PCI: don't shrink bridge resources")).  Prior to
dff22d2054, ARM didn't read bridge windows at all, so the "original size"
was zero, and we assigned a 3MB window.

After dff22d2054, we read the bridge windows before sizing the bus.  The
firmware programmed a 16MB window (size 0x01000000) in 00:00.0, and since
we never decrease the size, we kept 16MB even though we only needed 3MB.
But 16MB doesn't fit in the host bridge aperture, so we failed to assign
space for the window and the downstream devices.

I think this is a defect in the PCI core: we shouldn't rely on the firmware
to assign sensible windows.

Ray reported a similar problem, also on ARM, with Broadcom iProc.

Issues like this are too hard to fix right now, so revert dff22d2054.

Reported-by: Hannes <oe5hpm@gmail.com>
Reported-by: Ray Jui <rjui@broadcom.com>
Link: http://lkml.kernel.org/r/CAAa04yFQEUJm7Jj1qMT57-LG7ZGtnhNDBe=PpSRa70Mj+XhW-A@mail.gmail.com
Link: http://lkml.kernel.org/r/55F75BB8.4070405@broadcom.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-09-15 13:18:04 -05:00
..
boot microblaze: Remove *.dtb files in make clean 2015-02-10 16:24:39 +01:00
configs microblaze: Enable SERIAL_OF_PLATFORM 2014-06-04 06:59:46 +02:00
include Merge branch 'akpm' (patches from Andrew) 2015-09-10 18:19:42 -07:00
kernel Merge branch 'for-4.3/sg' of git://git.kernel.dk/linux-block 2015-09-02 13:22:38 -07:00
lib microblaze: Change libgcc-style functions from lib-y to obj-y 2014-07-18 14:26:09 +02:00
mm mm/fault, arch: Use pagefault_disable() to check for disabled pagefaults in the handler 2015-05-19 08:39:15 +02:00
oprofile microblaze: Core oprofile configs and hooks 2009-12-14 08:45:07 +01:00
pci PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code" 2015-09-15 13:18:04 -05:00
Kconfig gcov: enable GCOV_PROFILE_ALL from ARCH Kconfigs 2014-12-13 12:42:51 -08:00
Kconfig.debug microblaze: remove obsolete DEBUG_BOOTMEM 2011-01-10 09:29:51 +01:00
Kconfig.platform microblaze: Remove platform folder 2014-04-07 13:45:21 +02:00
Makefile microblaze: Remove platform folder 2014-04-07 13:45:21 +02:00