424 строки
11 KiB
C
424 строки
11 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Rockteck jh057n00900 5.5" MIPI-DSI panel driver
|
|
*
|
|
* Copyright (C) Purism SPC 2019
|
|
*/
|
|
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/drm_modes.h>
|
|
#include <drm/drm_panel.h>
|
|
#include <drm/drm_print.h>
|
|
#include <linux/backlight.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/media-bus-format.h>
|
|
#include <linux/module.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <video/display_timing.h>
|
|
#include <video/mipi_display.h>
|
|
|
|
#define DRV_NAME "panel-rocktech-jh057n00900"
|
|
|
|
/* Manufacturer specific Commands send via DSI */
|
|
#define ST7703_CMD_ALL_PIXEL_OFF 0x22
|
|
#define ST7703_CMD_ALL_PIXEL_ON 0x23
|
|
#define ST7703_CMD_SETDISP 0xB2
|
|
#define ST7703_CMD_SETRGBIF 0xB3
|
|
#define ST7703_CMD_SETCYC 0xB4
|
|
#define ST7703_CMD_SETBGP 0xB5
|
|
#define ST7703_CMD_SETVCOM 0xB6
|
|
#define ST7703_CMD_SETOTP 0xB7
|
|
#define ST7703_CMD_SETPOWER_EXT 0xB8
|
|
#define ST7703_CMD_SETEXTC 0xB9
|
|
#define ST7703_CMD_SETMIPI 0xBA
|
|
#define ST7703_CMD_SETVDC 0xBC
|
|
#define ST7703_CMD_UNKNOWN0 0xBF
|
|
#define ST7703_CMD_SETSCR 0xC0
|
|
#define ST7703_CMD_SETPOWER 0xC1
|
|
#define ST7703_CMD_SETPANEL 0xCC
|
|
#define ST7703_CMD_SETGAMMA 0xE0
|
|
#define ST7703_CMD_SETEQ 0xE3
|
|
#define ST7703_CMD_SETGIP1 0xE9
|
|
#define ST7703_CMD_SETGIP2 0xEA
|
|
|
|
struct jh057n {
|
|
struct device *dev;
|
|
struct drm_panel panel;
|
|
struct gpio_desc *reset_gpio;
|
|
struct backlight_device *backlight;
|
|
struct regulator *vcc;
|
|
struct regulator *iovcc;
|
|
bool prepared;
|
|
|
|
struct dentry *debugfs;
|
|
};
|
|
|
|
static inline struct jh057n *panel_to_jh057n(struct drm_panel *panel)
|
|
{
|
|
return container_of(panel, struct jh057n, panel);
|
|
}
|
|
|
|
#define dsi_generic_write_seq(dsi, seq...) do { \
|
|
static const u8 d[] = { seq }; \
|
|
int ret; \
|
|
ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d)); \
|
|
if (ret < 0) \
|
|
return ret; \
|
|
} while (0)
|
|
|
|
static int jh057n_init_sequence(struct jh057n *ctx)
|
|
{
|
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
|
struct device *dev = ctx->dev;
|
|
int ret;
|
|
|
|
/*
|
|
* Init sequence was supplied by the panel vendor. Most of the commands
|
|
* resemble the ST7703 but the number of parameters often don't match
|
|
* so it's likely a clone.
|
|
*/
|
|
dsi_generic_write_seq(dsi, ST7703_CMD_SETEXTC,
|
|
0xF1, 0x12, 0x83);
|
|
dsi_generic_write_seq(dsi, ST7703_CMD_SETRGBIF,
|
|
0x10, 0x10, 0x05, 0x05, 0x03, 0xFF, 0x00, 0x00,
|
|
0x00, 0x00);
|
|
dsi_generic_write_seq(dsi, ST7703_CMD_SETSCR,
|
|
0x73, 0x73, 0x50, 0x50, 0x00, 0x00, 0x08, 0x70,
|
|
0x00);
|
|
dsi_generic_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E);
|
|
dsi_generic_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B);
|
|
dsi_generic_write_seq(dsi, ST7703_CMD_SETCYC, 0x80);
|
|
dsi_generic_write_seq(dsi, ST7703_CMD_SETDISP, 0xF0, 0x12, 0x30);
|
|
dsi_generic_write_seq(dsi, ST7703_CMD_SETEQ,
|
|
0x07, 0x07, 0x0B, 0x0B, 0x03, 0x0B, 0x00, 0x00,
|
|
0x00, 0x00, 0xFF, 0x00, 0xC0, 0x10);
|
|
dsi_generic_write_seq(dsi, ST7703_CMD_SETBGP, 0x08, 0x08);
|
|
msleep(20);
|
|
|
|
dsi_generic_write_seq(dsi, ST7703_CMD_SETVCOM, 0x3F, 0x3F);
|
|
dsi_generic_write_seq(dsi, ST7703_CMD_UNKNOWN0, 0x02, 0x11, 0x00);
|
|
dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP1,
|
|
0x82, 0x10, 0x06, 0x05, 0x9E, 0x0A, 0xA5, 0x12,
|
|
0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38,
|
|
0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00,
|
|
0x03, 0x00, 0x00, 0x00, 0x75, 0x75, 0x31, 0x88,
|
|
0x88, 0x88, 0x88, 0x88, 0x88, 0x13, 0x88, 0x64,
|
|
0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
|
|
0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
|
|
dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP2,
|
|
0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88,
|
|
0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13,
|
|
0x57, 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88,
|
|
0x75, 0x88, 0x23, 0x14, 0x00, 0x00, 0x02, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x0A,
|
|
0xA5, 0x00, 0x00, 0x00, 0x00);
|
|
dsi_generic_write_seq(dsi, ST7703_CMD_SETGAMMA,
|
|
0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41, 0x37,
|
|
0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10, 0x11,
|
|
0x18, 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41,
|
|
0x37, 0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10,
|
|
0x11, 0x18);
|
|
msleep(20);
|
|
|
|
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
|
|
if (ret < 0) {
|
|
DRM_DEV_ERROR(dev, "Failed to exit sleep mode: %d\n", ret);
|
|
return ret;
|
|
}
|
|
/* Panel is operational 120 msec after reset */
|
|
msleep(60);
|
|
ret = mipi_dsi_dcs_set_display_on(dsi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n");
|
|
return 0;
|
|
}
|
|
|
|
static int jh057n_enable(struct drm_panel *panel)
|
|
{
|
|
struct jh057n *ctx = panel_to_jh057n(panel);
|
|
int ret;
|
|
|
|
ret = jh057n_init_sequence(ctx);
|
|
if (ret < 0) {
|
|
DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
return backlight_enable(ctx->backlight);
|
|
}
|
|
|
|
static int jh057n_disable(struct drm_panel *panel)
|
|
{
|
|
struct jh057n *ctx = panel_to_jh057n(panel);
|
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
|
|
|
backlight_disable(ctx->backlight);
|
|
return mipi_dsi_dcs_set_display_off(dsi);
|
|
}
|
|
|
|
static int jh057n_unprepare(struct drm_panel *panel)
|
|
{
|
|
struct jh057n *ctx = panel_to_jh057n(panel);
|
|
|
|
if (!ctx->prepared)
|
|
return 0;
|
|
|
|
regulator_disable(ctx->iovcc);
|
|
regulator_disable(ctx->vcc);
|
|
ctx->prepared = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int jh057n_prepare(struct drm_panel *panel)
|
|
{
|
|
struct jh057n *ctx = panel_to_jh057n(panel);
|
|
int ret;
|
|
|
|
if (ctx->prepared)
|
|
return 0;
|
|
|
|
DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
|
|
ret = regulator_enable(ctx->vcc);
|
|
if (ret < 0) {
|
|
DRM_DEV_ERROR(ctx->dev,
|
|
"Failed to enable vcc supply: %d\n", ret);
|
|
return ret;
|
|
}
|
|
ret = regulator_enable(ctx->iovcc);
|
|
if (ret < 0) {
|
|
DRM_DEV_ERROR(ctx->dev,
|
|
"Failed to enable iovcc supply: %d\n", ret);
|
|
goto disable_vcc;
|
|
}
|
|
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 1);
|
|
usleep_range(20, 40);
|
|
gpiod_set_value_cansleep(ctx->reset_gpio, 0);
|
|
msleep(20);
|
|
|
|
ctx->prepared = true;
|
|
|
|
return 0;
|
|
|
|
disable_vcc:
|
|
regulator_disable(ctx->vcc);
|
|
return ret;
|
|
}
|
|
|
|
static const struct drm_display_mode default_mode = {
|
|
.hdisplay = 720,
|
|
.hsync_start = 720 + 90,
|
|
.hsync_end = 720 + 90 + 20,
|
|
.htotal = 720 + 90 + 20 + 20,
|
|
.vdisplay = 1440,
|
|
.vsync_start = 1440 + 20,
|
|
.vsync_end = 1440 + 20 + 4,
|
|
.vtotal = 1440 + 20 + 4 + 12,
|
|
.vrefresh = 60,
|
|
.clock = 75276,
|
|
.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
|
|
.width_mm = 65,
|
|
.height_mm = 130,
|
|
};
|
|
|
|
static int jh057n_get_modes(struct drm_panel *panel)
|
|
{
|
|
struct jh057n *ctx = panel_to_jh057n(panel);
|
|
struct drm_display_mode *mode;
|
|
|
|
mode = drm_mode_duplicate(panel->drm, &default_mode);
|
|
if (!mode) {
|
|
DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n",
|
|
default_mode.hdisplay, default_mode.vdisplay,
|
|
default_mode.vrefresh);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
drm_mode_set_name(mode);
|
|
|
|
mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
|
|
panel->connector->display_info.width_mm = mode->width_mm;
|
|
panel->connector->display_info.height_mm = mode->height_mm;
|
|
drm_mode_probed_add(panel->connector, mode);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static const struct drm_panel_funcs jh057n_drm_funcs = {
|
|
.disable = jh057n_disable,
|
|
.unprepare = jh057n_unprepare,
|
|
.prepare = jh057n_prepare,
|
|
.enable = jh057n_enable,
|
|
.get_modes = jh057n_get_modes,
|
|
};
|
|
|
|
static int allpixelson_set(void *data, u64 val)
|
|
{
|
|
struct jh057n *ctx = data;
|
|
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
|
|
|
|
DRM_DEV_DEBUG_DRIVER(ctx->dev, "Setting all pixels on\n");
|
|
dsi_generic_write_seq(dsi, ST7703_CMD_ALL_PIXEL_ON);
|
|
msleep(val * 1000);
|
|
/* Reset the panel to get video back */
|
|
drm_panel_disable(&ctx->panel);
|
|
drm_panel_unprepare(&ctx->panel);
|
|
drm_panel_prepare(&ctx->panel);
|
|
drm_panel_enable(&ctx->panel);
|
|
|
|
return 0;
|
|
}
|
|
|
|
DEFINE_SIMPLE_ATTRIBUTE(allpixelson_fops, NULL,
|
|
allpixelson_set, "%llu\n");
|
|
|
|
static void jh057n_debugfs_init(struct jh057n *ctx)
|
|
{
|
|
ctx->debugfs = debugfs_create_dir(DRV_NAME, NULL);
|
|
|
|
debugfs_create_file("allpixelson", 0600, ctx->debugfs, ctx,
|
|
&allpixelson_fops);
|
|
}
|
|
|
|
static void jh057n_debugfs_remove(struct jh057n *ctx)
|
|
{
|
|
debugfs_remove_recursive(ctx->debugfs);
|
|
ctx->debugfs = NULL;
|
|
}
|
|
|
|
static int jh057n_probe(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct device *dev = &dsi->dev;
|
|
struct jh057n *ctx;
|
|
int ret;
|
|
|
|
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
|
|
if (!ctx)
|
|
return -ENOMEM;
|
|
|
|
ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
|
|
if (IS_ERR(ctx->reset_gpio)) {
|
|
DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
|
|
return PTR_ERR(ctx->reset_gpio);
|
|
}
|
|
|
|
mipi_dsi_set_drvdata(dsi, ctx);
|
|
|
|
ctx->dev = dev;
|
|
|
|
dsi->lanes = 4;
|
|
dsi->format = MIPI_DSI_FMT_RGB888;
|
|
dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
|
|
MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
|
|
|
|
ctx->backlight = devm_of_find_backlight(dev);
|
|
if (IS_ERR(ctx->backlight))
|
|
return PTR_ERR(ctx->backlight);
|
|
|
|
ctx->vcc = devm_regulator_get(dev, "vcc");
|
|
if (IS_ERR(ctx->vcc)) {
|
|
ret = PTR_ERR(ctx->vcc);
|
|
if (ret != -EPROBE_DEFER)
|
|
DRM_DEV_ERROR(dev,
|
|
"Failed to request vcc regulator: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
ctx->iovcc = devm_regulator_get(dev, "iovcc");
|
|
if (IS_ERR(ctx->iovcc)) {
|
|
ret = PTR_ERR(ctx->iovcc);
|
|
if (ret != -EPROBE_DEFER)
|
|
DRM_DEV_ERROR(dev,
|
|
"Failed to request iovcc regulator: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
drm_panel_init(&ctx->panel, dev, &jh057n_drm_funcs,
|
|
DRM_MODE_CONNECTOR_DSI);
|
|
|
|
drm_panel_add(&ctx->panel);
|
|
|
|
ret = mipi_dsi_attach(dsi);
|
|
if (ret < 0) {
|
|
DRM_DEV_ERROR(dev,
|
|
"mipi_dsi_attach failed (%d). Is host ready?\n",
|
|
ret);
|
|
drm_panel_remove(&ctx->panel);
|
|
return ret;
|
|
}
|
|
|
|
DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
|
|
default_mode.hdisplay, default_mode.vdisplay,
|
|
default_mode.vrefresh,
|
|
mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
|
|
|
|
jh057n_debugfs_init(ctx);
|
|
return 0;
|
|
}
|
|
|
|
static void jh057n_shutdown(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct jh057n *ctx = mipi_dsi_get_drvdata(dsi);
|
|
int ret;
|
|
|
|
ret = drm_panel_unprepare(&ctx->panel);
|
|
if (ret < 0)
|
|
DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
|
|
ret);
|
|
|
|
ret = drm_panel_disable(&ctx->panel);
|
|
if (ret < 0)
|
|
DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n",
|
|
ret);
|
|
}
|
|
|
|
static int jh057n_remove(struct mipi_dsi_device *dsi)
|
|
{
|
|
struct jh057n *ctx = mipi_dsi_get_drvdata(dsi);
|
|
int ret;
|
|
|
|
jh057n_shutdown(dsi);
|
|
|
|
ret = mipi_dsi_detach(dsi);
|
|
if (ret < 0)
|
|
DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n",
|
|
ret);
|
|
|
|
drm_panel_remove(&ctx->panel);
|
|
|
|
jh057n_debugfs_remove(ctx);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id jh057n_of_match[] = {
|
|
{ .compatible = "rocktech,jh057n00900" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, jh057n_of_match);
|
|
|
|
static struct mipi_dsi_driver jh057n_driver = {
|
|
.probe = jh057n_probe,
|
|
.remove = jh057n_remove,
|
|
.shutdown = jh057n_shutdown,
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.of_match_table = jh057n_of_match,
|
|
},
|
|
};
|
|
module_mipi_dsi_driver(jh057n_driver);
|
|
|
|
MODULE_AUTHOR("Guido Günther <agx@sigxcpu.org>");
|
|
MODULE_DESCRIPTION("DRM driver for Rocktech JH057N00900 MIPI DSI panel");
|
|
MODULE_LICENSE("GPL v2");
|