WSL2-Linux-Kernel/drivers/input/touchscreen/mms114.c

625 строки
15 KiB
C

// SPDX-License-Identifier: GPL-2.0
// Melfas MMS114/MMS152 touchscreen device driver
//
// Copyright (c) 2012 Samsung Electronics Co., Ltd.
// Author: Joonyoung Shim <jy0922.shim@samsung.com>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/i2c.h>
#include <linux/input/mt.h>
#include <linux/input/touchscreen.h>
#include <linux/interrupt.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
/* Write only registers */
#define MMS114_MODE_CONTROL 0x01
#define MMS114_OPERATION_MODE_MASK 0xE
#define MMS114_ACTIVE BIT(1)
#define MMS114_XY_RESOLUTION_H 0x02
#define MMS114_X_RESOLUTION 0x03
#define MMS114_Y_RESOLUTION 0x04
#define MMS114_CONTACT_THRESHOLD 0x05
#define MMS114_MOVING_THRESHOLD 0x06
/* Read only registers */
#define MMS114_PACKET_SIZE 0x0F
#define MMS114_INFORMATION 0x10
#define MMS114_TSP_REV 0xF0
#define MMS152_FW_REV 0xE1
#define MMS152_COMPAT_GROUP 0xF2
/* Minimum delay time is 50us between stop and start signal of i2c */
#define MMS114_I2C_DELAY 50
/* 200ms needs after power on */
#define MMS114_POWERON_DELAY 200
/* Touchscreen absolute values */
#define MMS114_MAX_AREA 0xff
#define MMS114_MAX_TOUCH 10
#define MMS114_PACKET_NUM 8
/* Touch type */
#define MMS114_TYPE_NONE 0
#define MMS114_TYPE_TOUCHSCREEN 1
#define MMS114_TYPE_TOUCHKEY 2
enum mms_type {
TYPE_MMS114 = 114,
TYPE_MMS152 = 152,
};
struct mms114_data {
struct i2c_client *client;
struct input_dev *input_dev;
struct regulator *core_reg;
struct regulator *io_reg;
struct touchscreen_properties props;
enum mms_type type;
unsigned int contact_threshold;
unsigned int moving_threshold;
/* Use cache data for mode control register(write only) */
u8 cache_mode_control;
};
struct mms114_touch {
u8 id:4, reserved_bit4:1, type:2, pressed:1;
u8 x_hi:4, y_hi:4;
u8 x_lo;
u8 y_lo;
u8 width;
u8 strength;
u8 reserved[2];
} __packed;
static int __mms114_read_reg(struct mms114_data *data, unsigned int reg,
unsigned int len, u8 *val)
{
struct i2c_client *client = data->client;
struct i2c_msg xfer[2];
u8 buf = reg & 0xff;
int error;
if (reg <= MMS114_MODE_CONTROL && reg + len > MMS114_MODE_CONTROL)
BUG();
/* Write register: use repeated start */
xfer[0].addr = client->addr;
xfer[0].flags = I2C_M_TEN | I2C_M_NOSTART;
xfer[0].len = 1;
xfer[0].buf = &buf;
/* Read data */
xfer[1].addr = client->addr;
xfer[1].flags = I2C_M_RD;
xfer[1].len = len;
xfer[1].buf = val;
error = i2c_transfer(client->adapter, xfer, 2);
if (error != 2) {
dev_err(&client->dev,
"%s: i2c transfer failed (%d)\n", __func__, error);
return error < 0 ? error : -EIO;
}
udelay(MMS114_I2C_DELAY);
return 0;
}
static int mms114_read_reg(struct mms114_data *data, unsigned int reg)
{
u8 val;
int error;
if (reg == MMS114_MODE_CONTROL)
return data->cache_mode_control;
error = __mms114_read_reg(data, reg, 1, &val);
return error < 0 ? error : val;
}
static int mms114_write_reg(struct mms114_data *data, unsigned int reg,
unsigned int val)
{
struct i2c_client *client = data->client;
u8 buf[2];
int error;
buf[0] = reg & 0xff;
buf[1] = val & 0xff;
error = i2c_master_send(client, buf, 2);
if (error != 2) {
dev_err(&client->dev,
"%s: i2c send failed (%d)\n", __func__, error);
return error < 0 ? error : -EIO;
}
udelay(MMS114_I2C_DELAY);
if (reg == MMS114_MODE_CONTROL)
data->cache_mode_control = val;
return 0;
}
static void mms114_process_mt(struct mms114_data *data, struct mms114_touch *touch)
{
struct i2c_client *client = data->client;
struct input_dev *input_dev = data->input_dev;
unsigned int id;
unsigned int x;
unsigned int y;
if (touch->id > MMS114_MAX_TOUCH) {
dev_err(&client->dev, "Wrong touch id (%d)\n", touch->id);
return;
}
if (touch->type != MMS114_TYPE_TOUCHSCREEN) {
dev_err(&client->dev, "Wrong touch type (%d)\n", touch->type);
return;
}
id = touch->id - 1;
x = touch->x_lo | touch->x_hi << 8;
y = touch->y_lo | touch->y_hi << 8;
dev_dbg(&client->dev,
"id: %d, type: %d, pressed: %d, x: %d, y: %d, width: %d, strength: %d\n",
id, touch->type, touch->pressed,
x, y, touch->width, touch->strength);
input_mt_slot(input_dev, id);
input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, touch->pressed);
if (touch->pressed) {
touchscreen_report_pos(input_dev, &data->props, x, y, true);
input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, touch->width);
input_report_abs(input_dev, ABS_MT_PRESSURE, touch->strength);
}
}
static irqreturn_t mms114_interrupt(int irq, void *dev_id)
{
struct mms114_data *data = dev_id;
struct input_dev *input_dev = data->input_dev;
struct mms114_touch touch[MMS114_MAX_TOUCH];
int packet_size;
int touch_size;
int index;
int error;
mutex_lock(&input_dev->mutex);
if (!input_dev->users) {
mutex_unlock(&input_dev->mutex);
goto out;
}
mutex_unlock(&input_dev->mutex);
packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE);
if (packet_size <= 0)
goto out;
touch_size = packet_size / MMS114_PACKET_NUM;
error = __mms114_read_reg(data, MMS114_INFORMATION, packet_size,
(u8 *)touch);
if (error < 0)
goto out;
for (index = 0; index < touch_size; index++)
mms114_process_mt(data, touch + index);
input_mt_report_pointer_emulation(data->input_dev, true);
input_sync(data->input_dev);
out:
return IRQ_HANDLED;
}
static int mms114_set_active(struct mms114_data *data, bool active)
{
int val;
val = mms114_read_reg(data, MMS114_MODE_CONTROL);
if (val < 0)
return val;
val &= ~MMS114_OPERATION_MODE_MASK;
/* If active is false, sleep mode */
if (active)
val |= MMS114_ACTIVE;
return mms114_write_reg(data, MMS114_MODE_CONTROL, val);
}
static int mms114_get_version(struct mms114_data *data)
{
struct device *dev = &data->client->dev;
u8 buf[6];
int group;
int error;
switch (data->type) {
case TYPE_MMS152:
error = __mms114_read_reg(data, MMS152_FW_REV, 3, buf);
if (error)
return error;
group = i2c_smbus_read_byte_data(data->client,
MMS152_COMPAT_GROUP);
if (group < 0)
return group;
dev_info(dev, "TSP FW Rev: bootloader 0x%x / core 0x%x / config 0x%x, Compat group: %c\n",
buf[0], buf[1], buf[2], group);
break;
case TYPE_MMS114:
error = __mms114_read_reg(data, MMS114_TSP_REV, 6, buf);
if (error)
return error;
dev_info(dev, "TSP Rev: 0x%x, HW Rev: 0x%x, Firmware Ver: 0x%x\n",
buf[0], buf[1], buf[3]);
break;
}
return 0;
}
static int mms114_setup_regs(struct mms114_data *data)
{
const struct touchscreen_properties *props = &data->props;
int val;
int error;
error = mms114_get_version(data);
if (error < 0)
return error;
/* MMS152 has no configuration or power on registers */
if (data->type == TYPE_MMS152)
return 0;
error = mms114_set_active(data, true);
if (error < 0)
return error;
val = (props->max_x >> 8) & 0xf;
val |= ((props->max_y >> 8) & 0xf) << 4;
error = mms114_write_reg(data, MMS114_XY_RESOLUTION_H, val);
if (error < 0)
return error;
val = props->max_x & 0xff;
error = mms114_write_reg(data, MMS114_X_RESOLUTION, val);
if (error < 0)
return error;
val = props->max_x & 0xff;
error = mms114_write_reg(data, MMS114_Y_RESOLUTION, val);
if (error < 0)
return error;
if (data->contact_threshold) {
error = mms114_write_reg(data, MMS114_CONTACT_THRESHOLD,
data->contact_threshold);
if (error < 0)
return error;
}
if (data->moving_threshold) {
error = mms114_write_reg(data, MMS114_MOVING_THRESHOLD,
data->moving_threshold);
if (error < 0)
return error;
}
return 0;
}
static int mms114_start(struct mms114_data *data)
{
struct i2c_client *client = data->client;
int error;
error = regulator_enable(data->core_reg);
if (error) {
dev_err(&client->dev, "Failed to enable avdd: %d\n", error);
return error;
}
error = regulator_enable(data->io_reg);
if (error) {
dev_err(&client->dev, "Failed to enable vdd: %d\n", error);
regulator_disable(data->core_reg);
return error;
}
msleep(MMS114_POWERON_DELAY);
error = mms114_setup_regs(data);
if (error < 0) {
regulator_disable(data->io_reg);
regulator_disable(data->core_reg);
return error;
}
enable_irq(client->irq);
return 0;
}
static void mms114_stop(struct mms114_data *data)
{
struct i2c_client *client = data->client;
int error;
disable_irq(client->irq);
error = regulator_disable(data->io_reg);
if (error)
dev_warn(&client->dev, "Failed to disable vdd: %d\n", error);
error = regulator_disable(data->core_reg);
if (error)
dev_warn(&client->dev, "Failed to disable avdd: %d\n", error);
}
static int mms114_input_open(struct input_dev *dev)
{
struct mms114_data *data = input_get_drvdata(dev);
return mms114_start(data);
}
static void mms114_input_close(struct input_dev *dev)
{
struct mms114_data *data = input_get_drvdata(dev);
mms114_stop(data);
}
static int mms114_parse_legacy_bindings(struct mms114_data *data)
{
struct device *dev = &data->client->dev;
struct touchscreen_properties *props = &data->props;
if (device_property_read_u32(dev, "x-size", &props->max_x)) {
dev_dbg(dev, "failed to get legacy x-size property\n");
return -EINVAL;
}
if (device_property_read_u32(dev, "y-size", &props->max_y)) {
dev_dbg(dev, "failed to get legacy y-size property\n");
return -EINVAL;
}
device_property_read_u32(dev, "contact-threshold",
&data->contact_threshold);
device_property_read_u32(dev, "moving-threshold",
&data->moving_threshold);
if (device_property_read_bool(dev, "x-invert"))
props->invert_x = true;
if (device_property_read_bool(dev, "y-invert"))
props->invert_y = true;
props->swap_x_y = false;
return 0;
}
static int mms114_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct mms114_data *data;
struct input_dev *input_dev;
const void *match_data;
int error;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_PROTOCOL_MANGLING)) {
dev_err(&client->dev,
"Need i2c bus that supports protocol mangling\n");
return -ENODEV;
}
data = devm_kzalloc(&client->dev, sizeof(struct mms114_data),
GFP_KERNEL);
input_dev = devm_input_allocate_device(&client->dev);
if (!data || !input_dev) {
dev_err(&client->dev, "Failed to allocate memory\n");
return -ENOMEM;
}
data->client = client;
data->input_dev = input_dev;
/* FIXME: switch to device_get_match_data() when available */
match_data = of_device_get_match_data(&client->dev);
if (!match_data)
return -EINVAL;
data->type = (enum mms_type)match_data;
input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_X);
input_set_capability(input_dev, EV_ABS, ABS_MT_POSITION_Y);
input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, 255, 0, 0);
input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
0, MMS114_MAX_AREA, 0, 0);
touchscreen_parse_properties(input_dev, true, &data->props);
if (!data->props.max_x || !data->props.max_y) {
dev_dbg(&client->dev,
"missing X/Y size properties, trying legacy bindings\n");
error = mms114_parse_legacy_bindings(data);
if (error)
return error;
input_set_abs_params(input_dev, ABS_MT_POSITION_X,
0, data->props.max_x, 0, 0);
input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
0, data->props.max_y, 0, 0);
}
if (data->type == TYPE_MMS114) {
/*
* The firmware handles movement and pressure fuzz, so
* don't duplicate that in software.
*/
data->moving_threshold = input_abs_get_fuzz(input_dev,
ABS_MT_POSITION_X);
data->contact_threshold = input_abs_get_fuzz(input_dev,
ABS_MT_PRESSURE);
input_abs_set_fuzz(input_dev, ABS_MT_POSITION_X, 0);
input_abs_set_fuzz(input_dev, ABS_MT_POSITION_Y, 0);
input_abs_set_fuzz(input_dev, ABS_MT_PRESSURE, 0);
}
input_dev->name = devm_kasprintf(&client->dev, GFP_KERNEL,
"MELFAS MMS%d Touchscreen",
data->type);
if (!input_dev->name)
return -ENOMEM;
input_dev->id.bustype = BUS_I2C;
input_dev->dev.parent = &client->dev;
input_dev->open = mms114_input_open;
input_dev->close = mms114_input_close;
error = input_mt_init_slots(input_dev, MMS114_MAX_TOUCH,
INPUT_MT_DIRECT);
if (error)
return error;
input_set_drvdata(input_dev, data);
i2c_set_clientdata(client, data);
data->core_reg = devm_regulator_get(&client->dev, "avdd");
if (IS_ERR(data->core_reg)) {
error = PTR_ERR(data->core_reg);
dev_err(&client->dev,
"Unable to get the Core regulator (%d)\n", error);
return error;
}
data->io_reg = devm_regulator_get(&client->dev, "vdd");
if (IS_ERR(data->io_reg)) {
error = PTR_ERR(data->io_reg);
dev_err(&client->dev,
"Unable to get the IO regulator (%d)\n", error);
return error;
}
error = devm_request_threaded_irq(&client->dev, client->irq,
NULL, mms114_interrupt, IRQF_ONESHOT,
dev_name(&client->dev), data);
if (error) {
dev_err(&client->dev, "Failed to register interrupt\n");
return error;
}
disable_irq(client->irq);
error = input_register_device(data->input_dev);
if (error) {
dev_err(&client->dev, "Failed to register input device\n");
return error;
}
return 0;
}
static int __maybe_unused mms114_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct mms114_data *data = i2c_get_clientdata(client);
struct input_dev *input_dev = data->input_dev;
int id;
/* Release all touch */
for (id = 0; id < MMS114_MAX_TOUCH; id++) {
input_mt_slot(input_dev, id);
input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, false);
}
input_mt_report_pointer_emulation(input_dev, true);
input_sync(input_dev);
mutex_lock(&input_dev->mutex);
if (input_dev->users)
mms114_stop(data);
mutex_unlock(&input_dev->mutex);
return 0;
}
static int __maybe_unused mms114_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct mms114_data *data = i2c_get_clientdata(client);
struct input_dev *input_dev = data->input_dev;
int error;
mutex_lock(&input_dev->mutex);
if (input_dev->users) {
error = mms114_start(data);
if (error < 0) {
mutex_unlock(&input_dev->mutex);
return error;
}
}
mutex_unlock(&input_dev->mutex);
return 0;
}
static SIMPLE_DEV_PM_OPS(mms114_pm_ops, mms114_suspend, mms114_resume);
static const struct i2c_device_id mms114_id[] = {
{ "mms114", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, mms114_id);
#ifdef CONFIG_OF
static const struct of_device_id mms114_dt_match[] = {
{
.compatible = "melfas,mms114",
.data = (void *)TYPE_MMS114,
}, {
.compatible = "melfas,mms152",
.data = (void *)TYPE_MMS152,
},
{ }
};
MODULE_DEVICE_TABLE(of, mms114_dt_match);
#endif
static struct i2c_driver mms114_driver = {
.driver = {
.name = "mms114",
.pm = &mms114_pm_ops,
.of_match_table = of_match_ptr(mms114_dt_match),
},
.probe = mms114_probe,
.id_table = mms114_id,
};
module_i2c_driver(mms114_driver);
/* Module information */
MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
MODULE_DESCRIPTION("MELFAS mms114 Touchscreen driver");
MODULE_LICENSE("GPL v2");