91 строка
2.8 KiB
ReStructuredText
91 строка
2.8 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0
|
|
|
|
The Virtual Media Controller Driver (vimc)
|
|
==========================================
|
|
|
|
The vimc driver emulates complex video hardware using the V4L2 API and the Media
|
|
API. It has a capture device and three subdevices: sensor, debayer and scaler.
|
|
|
|
Topology
|
|
--------
|
|
|
|
The topology is hardcoded, although you could modify it in vimc-core and
|
|
recompile the driver to achieve your own topology. This is the default topology:
|
|
|
|
.. _vimc_topology_graph:
|
|
|
|
.. kernel-figure:: vimc.dot
|
|
:alt: Diagram of the default media pipeline topology
|
|
:align: center
|
|
|
|
Media pipeline graph on vimc
|
|
|
|
Configuring the topology
|
|
~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Each subdevice will come with its default configuration (pixelformat, height,
|
|
width, ...). One needs to configure the topology in order to match the
|
|
configuration on each linked subdevice to stream frames through the pipeline.
|
|
If the configuration doesn't match, the stream will fail. The ``v4l-utils``
|
|
package is a bundle of user-space applications, that comes with ``media-ctl`` and
|
|
``v4l2-ctl`` that can be used to configure the vimc configuration. This sequence
|
|
of commands fits for the default topology:
|
|
|
|
.. code-block:: bash
|
|
|
|
media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]'
|
|
media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]'
|
|
media-ctl -d platform:vimc -V '"Sensor B":0[fmt:SBGGR8_1X8/640x480]'
|
|
media-ctl -d platform:vimc -V '"Debayer B":0[fmt:SBGGR8_1X8/640x480]'
|
|
v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=1920,height=1440
|
|
v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81
|
|
v4l2-ctl -z platform:vimc -d "Raw Capture 1" -v pixelformat=BA81
|
|
|
|
Subdevices
|
|
----------
|
|
|
|
Subdevices define the behavior of an entity in the topology. Depending on the
|
|
subdevice, the entity can have multiple pads of type source or sink.
|
|
|
|
vimc-sensor:
|
|
Generates images in several formats using video test pattern generator.
|
|
Exposes:
|
|
|
|
* 1 Pad source
|
|
|
|
vimc-debayer:
|
|
Transforms images in bayer format into a non-bayer format.
|
|
Exposes:
|
|
|
|
* 1 Pad sink
|
|
* 1 Pad source
|
|
|
|
vimc-scaler:
|
|
Scale up the image by a factor of 3. E.g.: a 640x480 image becomes a
|
|
1920x1440 image. (this value can be configured, see at
|
|
`Module options`_).
|
|
Exposes:
|
|
|
|
* 1 Pad sink
|
|
* 1 Pad source
|
|
|
|
vimc-capture:
|
|
Exposes node /dev/videoX to allow userspace to capture the stream.
|
|
Exposes:
|
|
|
|
* 1 Pad sink
|
|
* 1 Pad source
|
|
|
|
|
|
Module options
|
|
--------------
|
|
|
|
Vimc has a module parameter to configure the driver.
|
|
|
|
* ``sca_mult=<unsigned int>``
|
|
|
|
Image size multiplier factor to be used to multiply both width and
|
|
height, so the image size will be ``sca_mult^2`` bigger than the
|
|
original one. Currently, only supports scaling up (the default value
|
|
is 3).
|