758 строки
19 KiB
C
758 строки
19 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* TI ADC MFD driver
|
|
*
|
|
* Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/err.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/iio/machine.h>
|
|
#include <linux/iio/driver.h>
|
|
#include <linux/iopoll.h>
|
|
|
|
#include <linux/mfd/ti_am335x_tscadc.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/kfifo_buf.h>
|
|
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#define DMA_BUFFER_SIZE SZ_2K
|
|
|
|
struct tiadc_dma {
|
|
struct dma_slave_config conf;
|
|
struct dma_chan *chan;
|
|
dma_addr_t addr;
|
|
dma_cookie_t cookie;
|
|
u8 *buf;
|
|
int current_period;
|
|
int period_size;
|
|
u8 fifo_thresh;
|
|
};
|
|
|
|
struct tiadc_device {
|
|
struct ti_tscadc_dev *mfd_tscadc;
|
|
struct tiadc_dma dma;
|
|
struct mutex fifo1_lock; /* to protect fifo access */
|
|
int channels;
|
|
int total_ch_enabled;
|
|
u8 channel_line[8];
|
|
u8 channel_step[8];
|
|
int buffer_en_ch_steps;
|
|
u16 data[8];
|
|
u32 open_delay[8], sample_delay[8], step_avg[8];
|
|
};
|
|
|
|
static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg)
|
|
{
|
|
return readl(adc->mfd_tscadc->tscadc_base + reg);
|
|
}
|
|
|
|
static void tiadc_writel(struct tiadc_device *adc, unsigned int reg,
|
|
unsigned int val)
|
|
{
|
|
writel(val, adc->mfd_tscadc->tscadc_base + reg);
|
|
}
|
|
|
|
static u32 get_adc_step_mask(struct tiadc_device *adc_dev)
|
|
{
|
|
u32 step_en;
|
|
|
|
step_en = ((1 << adc_dev->channels) - 1);
|
|
step_en <<= TOTAL_STEPS - adc_dev->channels + 1;
|
|
return step_en;
|
|
}
|
|
|
|
static u32 get_adc_chan_step_mask(struct tiadc_device *adc_dev,
|
|
struct iio_chan_spec const *chan)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(adc_dev->channel_step); i++) {
|
|
if (chan->channel == adc_dev->channel_line[i]) {
|
|
u32 step;
|
|
|
|
step = adc_dev->channel_step[i];
|
|
/* +1 for the charger */
|
|
return 1 << (step + 1);
|
|
}
|
|
}
|
|
WARN_ON(1);
|
|
return 0;
|
|
}
|
|
|
|
static u32 get_adc_step_bit(struct tiadc_device *adc_dev, int chan)
|
|
{
|
|
return 1 << adc_dev->channel_step[chan];
|
|
}
|
|
|
|
static int tiadc_wait_idle(struct tiadc_device *adc_dev)
|
|
{
|
|
u32 val;
|
|
|
|
return readl_poll_timeout(adc_dev->mfd_tscadc->tscadc_base + REG_ADCFSM,
|
|
val, !(val & SEQ_STATUS), 10,
|
|
IDLE_TIMEOUT_MS * 1000 * adc_dev->channels);
|
|
}
|
|
|
|
static void tiadc_step_config(struct iio_dev *indio_dev)
|
|
{
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
unsigned int stepconfig;
|
|
int i, steps = 0;
|
|
|
|
/*
|
|
* There are 16 configurable steps and 8 analog input
|
|
* lines available which are shared between Touchscreen and ADC.
|
|
*
|
|
* Steps forwards i.e. from 0 towards 16 are used by ADC
|
|
* depending on number of input lines needed.
|
|
* Channel would represent which analog input
|
|
* needs to be given to ADC to digitalize data.
|
|
*/
|
|
for (i = 0; i < adc_dev->channels; i++) {
|
|
int chan;
|
|
|
|
chan = adc_dev->channel_line[i];
|
|
|
|
if (adc_dev->step_avg[i])
|
|
stepconfig = STEPCONFIG_AVG(ffs(adc_dev->step_avg[i]) - 1) |
|
|
STEPCONFIG_FIFO1;
|
|
else
|
|
stepconfig = STEPCONFIG_FIFO1;
|
|
|
|
if (iio_buffer_enabled(indio_dev))
|
|
stepconfig |= STEPCONFIG_MODE_SWCNT;
|
|
|
|
tiadc_writel(adc_dev, REG_STEPCONFIG(steps),
|
|
stepconfig | STEPCONFIG_INP(chan) |
|
|
STEPCONFIG_INM_ADCREFM | STEPCONFIG_RFP_VREFP |
|
|
STEPCONFIG_RFM_VREFN);
|
|
|
|
tiadc_writel(adc_dev, REG_STEPDELAY(steps),
|
|
STEPDELAY_OPEN(adc_dev->open_delay[i]) |
|
|
STEPDELAY_SAMPLE(adc_dev->sample_delay[i]));
|
|
|
|
adc_dev->channel_step[i] = steps;
|
|
steps++;
|
|
}
|
|
}
|
|
|
|
static irqreturn_t tiadc_irq_h(int irq, void *private)
|
|
{
|
|
struct iio_dev *indio_dev = private;
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
unsigned int status, config, adc_fsm;
|
|
unsigned short count = 0;
|
|
|
|
status = tiadc_readl(adc_dev, REG_IRQSTATUS);
|
|
|
|
/*
|
|
* ADC and touchscreen share the IRQ line.
|
|
* FIFO0 interrupts are used by TSC. Handle FIFO1 IRQs here only
|
|
*/
|
|
if (status & IRQENB_FIFO1OVRRUN) {
|
|
/* FIFO Overrun. Clear flag. Disable/Enable ADC to recover */
|
|
config = tiadc_readl(adc_dev, REG_CTRL);
|
|
config &= ~(CNTRLREG_SSENB);
|
|
tiadc_writel(adc_dev, REG_CTRL, config);
|
|
tiadc_writel(adc_dev, REG_IRQSTATUS,
|
|
IRQENB_FIFO1OVRRUN | IRQENB_FIFO1UNDRFLW |
|
|
IRQENB_FIFO1THRES);
|
|
|
|
/*
|
|
* Wait for the idle state.
|
|
* ADC needs to finish the current conversion
|
|
* before disabling the module
|
|
*/
|
|
do {
|
|
adc_fsm = tiadc_readl(adc_dev, REG_ADCFSM);
|
|
} while (adc_fsm != 0x10 && count++ < 100);
|
|
|
|
tiadc_writel(adc_dev, REG_CTRL, (config | CNTRLREG_SSENB));
|
|
return IRQ_HANDLED;
|
|
} else if (status & IRQENB_FIFO1THRES) {
|
|
/* Disable irq and wake worker thread */
|
|
tiadc_writel(adc_dev, REG_IRQCLR, IRQENB_FIFO1THRES);
|
|
return IRQ_WAKE_THREAD;
|
|
}
|
|
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
static irqreturn_t tiadc_worker_h(int irq, void *private)
|
|
{
|
|
struct iio_dev *indio_dev = private;
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
int i, k, fifo1count, read;
|
|
u16 *data = adc_dev->data;
|
|
|
|
fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
|
|
for (k = 0; k < fifo1count; k = k + i) {
|
|
for (i = 0; i < indio_dev->scan_bytes / 2; i++) {
|
|
read = tiadc_readl(adc_dev, REG_FIFO1);
|
|
data[i] = read & FIFOREAD_DATA_MASK;
|
|
}
|
|
iio_push_to_buffers(indio_dev, (u8 *)data);
|
|
}
|
|
|
|
tiadc_writel(adc_dev, REG_IRQSTATUS, IRQENB_FIFO1THRES);
|
|
tiadc_writel(adc_dev, REG_IRQENABLE, IRQENB_FIFO1THRES);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void tiadc_dma_rx_complete(void *param)
|
|
{
|
|
struct iio_dev *indio_dev = param;
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
struct tiadc_dma *dma = &adc_dev->dma;
|
|
u8 *data;
|
|
int i;
|
|
|
|
data = dma->buf + dma->current_period * dma->period_size;
|
|
dma->current_period = 1 - dma->current_period; /* swap the buffer ID */
|
|
|
|
for (i = 0; i < dma->period_size; i += indio_dev->scan_bytes) {
|
|
iio_push_to_buffers(indio_dev, data);
|
|
data += indio_dev->scan_bytes;
|
|
}
|
|
}
|
|
|
|
static int tiadc_start_dma(struct iio_dev *indio_dev)
|
|
{
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
struct tiadc_dma *dma = &adc_dev->dma;
|
|
struct dma_async_tx_descriptor *desc;
|
|
|
|
dma->current_period = 0; /* We start to fill period 0 */
|
|
|
|
/*
|
|
* Make the fifo thresh as the multiple of total number of
|
|
* channels enabled, so make sure that cyclic DMA period
|
|
* length is also a multiple of total number of channels
|
|
* enabled. This ensures that no invalid data is reported
|
|
* to the stack via iio_push_to_buffers().
|
|
*/
|
|
dma->fifo_thresh = rounddown(FIFO1_THRESHOLD + 1,
|
|
adc_dev->total_ch_enabled) - 1;
|
|
|
|
/* Make sure that period length is multiple of fifo thresh level */
|
|
dma->period_size = rounddown(DMA_BUFFER_SIZE / 2,
|
|
(dma->fifo_thresh + 1) * sizeof(u16));
|
|
|
|
dma->conf.src_maxburst = dma->fifo_thresh + 1;
|
|
dmaengine_slave_config(dma->chan, &dma->conf);
|
|
|
|
desc = dmaengine_prep_dma_cyclic(dma->chan, dma->addr,
|
|
dma->period_size * 2,
|
|
dma->period_size, DMA_DEV_TO_MEM,
|
|
DMA_PREP_INTERRUPT);
|
|
if (!desc)
|
|
return -EBUSY;
|
|
|
|
desc->callback = tiadc_dma_rx_complete;
|
|
desc->callback_param = indio_dev;
|
|
|
|
dma->cookie = dmaengine_submit(desc);
|
|
|
|
dma_async_issue_pending(dma->chan);
|
|
|
|
tiadc_writel(adc_dev, REG_FIFO1THR, dma->fifo_thresh);
|
|
tiadc_writel(adc_dev, REG_DMA1REQ, dma->fifo_thresh);
|
|
tiadc_writel(adc_dev, REG_DMAENABLE_SET, DMA_FIFO1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tiadc_buffer_preenable(struct iio_dev *indio_dev)
|
|
{
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
int i, fifo1count;
|
|
int ret;
|
|
|
|
ret = tiadc_wait_idle(adc_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
tiadc_writel(adc_dev, REG_IRQCLR,
|
|
IRQENB_FIFO1THRES | IRQENB_FIFO1OVRRUN |
|
|
IRQENB_FIFO1UNDRFLW);
|
|
|
|
/* Flush FIFO. Needed in corner cases in simultaneous tsc/adc use */
|
|
fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
|
|
for (i = 0; i < fifo1count; i++)
|
|
tiadc_readl(adc_dev, REG_FIFO1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tiadc_buffer_postenable(struct iio_dev *indio_dev)
|
|
{
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
struct tiadc_dma *dma = &adc_dev->dma;
|
|
unsigned int irq_enable;
|
|
unsigned int enb = 0;
|
|
u8 bit;
|
|
|
|
tiadc_step_config(indio_dev);
|
|
for_each_set_bit(bit, indio_dev->active_scan_mask, adc_dev->channels) {
|
|
enb |= (get_adc_step_bit(adc_dev, bit) << 1);
|
|
adc_dev->total_ch_enabled++;
|
|
}
|
|
adc_dev->buffer_en_ch_steps = enb;
|
|
|
|
if (dma->chan)
|
|
tiadc_start_dma(indio_dev);
|
|
|
|
am335x_tsc_se_set_cache(adc_dev->mfd_tscadc, enb);
|
|
|
|
tiadc_writel(adc_dev, REG_IRQSTATUS,
|
|
IRQENB_FIFO1THRES | IRQENB_FIFO1OVRRUN |
|
|
IRQENB_FIFO1UNDRFLW);
|
|
|
|
irq_enable = IRQENB_FIFO1OVRRUN;
|
|
if (!dma->chan)
|
|
irq_enable |= IRQENB_FIFO1THRES;
|
|
tiadc_writel(adc_dev, REG_IRQENABLE, irq_enable);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tiadc_buffer_predisable(struct iio_dev *indio_dev)
|
|
{
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
struct tiadc_dma *dma = &adc_dev->dma;
|
|
int fifo1count, i;
|
|
|
|
tiadc_writel(adc_dev, REG_IRQCLR,
|
|
IRQENB_FIFO1THRES | IRQENB_FIFO1OVRRUN |
|
|
IRQENB_FIFO1UNDRFLW);
|
|
am335x_tsc_se_clr(adc_dev->mfd_tscadc, adc_dev->buffer_en_ch_steps);
|
|
adc_dev->buffer_en_ch_steps = 0;
|
|
adc_dev->total_ch_enabled = 0;
|
|
if (dma->chan) {
|
|
tiadc_writel(adc_dev, REG_DMAENABLE_CLEAR, 0x2);
|
|
dmaengine_terminate_async(dma->chan);
|
|
}
|
|
|
|
/* Flush FIFO of leftover data in the time it takes to disable adc */
|
|
fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
|
|
for (i = 0; i < fifo1count; i++)
|
|
tiadc_readl(adc_dev, REG_FIFO1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tiadc_buffer_postdisable(struct iio_dev *indio_dev)
|
|
{
|
|
tiadc_step_config(indio_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct iio_buffer_setup_ops tiadc_buffer_setup_ops = {
|
|
.preenable = &tiadc_buffer_preenable,
|
|
.postenable = &tiadc_buffer_postenable,
|
|
.predisable = &tiadc_buffer_predisable,
|
|
.postdisable = &tiadc_buffer_postdisable,
|
|
};
|
|
|
|
static int tiadc_iio_buffered_hardware_setup(struct device *dev,
|
|
struct iio_dev *indio_dev,
|
|
irqreturn_t (*pollfunc_bh)(int irq, void *p),
|
|
irqreturn_t (*pollfunc_th)(int irq, void *p),
|
|
int irq, unsigned long flags,
|
|
const struct iio_buffer_setup_ops *setup_ops)
|
|
{
|
|
int ret;
|
|
|
|
ret = devm_iio_kfifo_buffer_setup(dev, indio_dev, setup_ops);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return devm_request_threaded_irq(dev, irq, pollfunc_th, pollfunc_bh,
|
|
flags, indio_dev->name, indio_dev);
|
|
}
|
|
|
|
static const char * const chan_name_ain[] = {
|
|
"AIN0",
|
|
"AIN1",
|
|
"AIN2",
|
|
"AIN3",
|
|
"AIN4",
|
|
"AIN5",
|
|
"AIN6",
|
|
"AIN7",
|
|
};
|
|
|
|
static int tiadc_channel_init(struct device *dev, struct iio_dev *indio_dev,
|
|
int channels)
|
|
{
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
struct iio_chan_spec *chan_array;
|
|
struct iio_chan_spec *chan;
|
|
int i;
|
|
|
|
indio_dev->num_channels = channels;
|
|
chan_array = devm_kcalloc(dev, channels, sizeof(*chan_array),
|
|
GFP_KERNEL);
|
|
if (!chan_array)
|
|
return -ENOMEM;
|
|
|
|
chan = chan_array;
|
|
for (i = 0; i < channels; i++, chan++) {
|
|
chan->type = IIO_VOLTAGE;
|
|
chan->indexed = 1;
|
|
chan->channel = adc_dev->channel_line[i];
|
|
chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
|
|
chan->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE);
|
|
chan->datasheet_name = chan_name_ain[chan->channel];
|
|
chan->scan_index = i;
|
|
chan->scan_type.sign = 'u';
|
|
chan->scan_type.realbits = 12;
|
|
chan->scan_type.storagebits = 16;
|
|
}
|
|
|
|
indio_dev->channels = chan_array;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tiadc_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int *val, int *val2,
|
|
long mask)
|
|
{
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
int i, map_val;
|
|
unsigned int fifo1count, read, stepid;
|
|
bool found = false;
|
|
u32 step_en;
|
|
unsigned long timeout;
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
break;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
switch (chan->type) {
|
|
case IIO_VOLTAGE:
|
|
*val = 1800;
|
|
*val2 = chan->scan_type.realbits;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (iio_buffer_enabled(indio_dev))
|
|
return -EBUSY;
|
|
|
|
step_en = get_adc_chan_step_mask(adc_dev, chan);
|
|
if (!step_en)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&adc_dev->fifo1_lock);
|
|
|
|
ret = tiadc_wait_idle(adc_dev);
|
|
if (ret)
|
|
goto err_unlock;
|
|
|
|
fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
|
|
while (fifo1count--)
|
|
tiadc_readl(adc_dev, REG_FIFO1);
|
|
|
|
am335x_tsc_se_set_once(adc_dev->mfd_tscadc, step_en);
|
|
|
|
/* Wait for Fifo threshold interrupt */
|
|
timeout = jiffies + msecs_to_jiffies(IDLE_TIMEOUT_MS * adc_dev->channels);
|
|
while (1) {
|
|
fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
|
|
if (fifo1count)
|
|
break;
|
|
|
|
if (time_after(jiffies, timeout)) {
|
|
am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
|
|
ret = -EAGAIN;
|
|
goto err_unlock;
|
|
}
|
|
}
|
|
|
|
map_val = adc_dev->channel_step[chan->scan_index];
|
|
|
|
/*
|
|
* We check the complete FIFO. We programmed just one entry but in case
|
|
* something went wrong we left empty handed (-EAGAIN previously) and
|
|
* then the value apeared somehow in the FIFO we would have two entries.
|
|
* Therefore we read every item and keep only the latest version of the
|
|
* requested channel.
|
|
*/
|
|
for (i = 0; i < fifo1count; i++) {
|
|
read = tiadc_readl(adc_dev, REG_FIFO1);
|
|
stepid = read & FIFOREAD_CHNLID_MASK;
|
|
stepid = stepid >> 0x10;
|
|
|
|
if (stepid == map_val) {
|
|
read = read & FIFOREAD_DATA_MASK;
|
|
found = true;
|
|
*val = (u16)read;
|
|
}
|
|
}
|
|
|
|
am335x_tsc_se_adc_done(adc_dev->mfd_tscadc);
|
|
|
|
if (!found)
|
|
ret = -EBUSY;
|
|
|
|
err_unlock:
|
|
mutex_unlock(&adc_dev->fifo1_lock);
|
|
return ret ? ret : IIO_VAL_INT;
|
|
}
|
|
|
|
static const struct iio_info tiadc_info = {
|
|
.read_raw = &tiadc_read_raw,
|
|
};
|
|
|
|
static int tiadc_request_dma(struct platform_device *pdev,
|
|
struct tiadc_device *adc_dev)
|
|
{
|
|
struct tiadc_dma *dma = &adc_dev->dma;
|
|
dma_cap_mask_t mask;
|
|
|
|
/* Default slave configuration parameters */
|
|
dma->conf.direction = DMA_DEV_TO_MEM;
|
|
dma->conf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
|
|
dma->conf.src_addr = adc_dev->mfd_tscadc->tscadc_phys_base + REG_FIFO1;
|
|
|
|
dma_cap_zero(mask);
|
|
dma_cap_set(DMA_CYCLIC, mask);
|
|
|
|
/* Get a channel for RX */
|
|
dma->chan = dma_request_chan(adc_dev->mfd_tscadc->dev, "fifo1");
|
|
if (IS_ERR(dma->chan)) {
|
|
int ret = PTR_ERR(dma->chan);
|
|
|
|
dma->chan = NULL;
|
|
return ret;
|
|
}
|
|
|
|
/* RX buffer */
|
|
dma->buf = dma_alloc_coherent(dma->chan->device->dev, DMA_BUFFER_SIZE,
|
|
&dma->addr, GFP_KERNEL);
|
|
if (!dma->buf)
|
|
goto err;
|
|
|
|
return 0;
|
|
|
|
err:
|
|
dma_release_channel(dma->chan);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static int tiadc_parse_dt(struct platform_device *pdev,
|
|
struct tiadc_device *adc_dev)
|
|
{
|
|
struct device_node *node = pdev->dev.of_node;
|
|
struct property *prop;
|
|
const __be32 *cur;
|
|
int channels = 0;
|
|
u32 val;
|
|
int i;
|
|
|
|
of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
|
|
adc_dev->channel_line[channels] = val;
|
|
|
|
/* Set Default values for optional DT parameters */
|
|
adc_dev->open_delay[channels] = STEPCONFIG_OPENDLY;
|
|
adc_dev->sample_delay[channels] = STEPCONFIG_SAMPLEDLY;
|
|
adc_dev->step_avg[channels] = 16;
|
|
|
|
channels++;
|
|
}
|
|
|
|
adc_dev->channels = channels;
|
|
|
|
of_property_read_u32_array(node, "ti,chan-step-avg",
|
|
adc_dev->step_avg, channels);
|
|
of_property_read_u32_array(node, "ti,chan-step-opendelay",
|
|
adc_dev->open_delay, channels);
|
|
of_property_read_u32_array(node, "ti,chan-step-sampledelay",
|
|
adc_dev->sample_delay, channels);
|
|
|
|
for (i = 0; i < adc_dev->channels; i++) {
|
|
int chan;
|
|
|
|
chan = adc_dev->channel_line[i];
|
|
|
|
if (adc_dev->step_avg[i] > STEPCONFIG_AVG_16) {
|
|
dev_warn(&pdev->dev,
|
|
"chan %d: wrong step avg, truncated to %ld\n",
|
|
chan, STEPCONFIG_AVG_16);
|
|
adc_dev->step_avg[i] = STEPCONFIG_AVG_16;
|
|
}
|
|
|
|
if (adc_dev->open_delay[i] > STEPCONFIG_MAX_OPENDLY) {
|
|
dev_warn(&pdev->dev,
|
|
"chan %d: wrong open delay, truncated to 0x%lX\n",
|
|
chan, STEPCONFIG_MAX_OPENDLY);
|
|
adc_dev->open_delay[i] = STEPCONFIG_MAX_OPENDLY;
|
|
}
|
|
|
|
if (adc_dev->sample_delay[i] > STEPCONFIG_MAX_SAMPLE) {
|
|
dev_warn(&pdev->dev,
|
|
"chan %d: wrong sample delay, truncated to 0x%lX\n",
|
|
chan, STEPCONFIG_MAX_SAMPLE);
|
|
adc_dev->sample_delay[i] = STEPCONFIG_MAX_SAMPLE;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tiadc_probe(struct platform_device *pdev)
|
|
{
|
|
struct iio_dev *indio_dev;
|
|
struct tiadc_device *adc_dev;
|
|
struct device_node *node = pdev->dev.of_node;
|
|
int err;
|
|
|
|
if (!node) {
|
|
dev_err(&pdev->dev, "Could not find valid DT data.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc_dev));
|
|
if (!indio_dev) {
|
|
dev_err(&pdev->dev, "failed to allocate iio device\n");
|
|
return -ENOMEM;
|
|
}
|
|
adc_dev = iio_priv(indio_dev);
|
|
|
|
adc_dev->mfd_tscadc = ti_tscadc_dev_get(pdev);
|
|
tiadc_parse_dt(pdev, adc_dev);
|
|
|
|
indio_dev->name = dev_name(&pdev->dev);
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->info = &tiadc_info;
|
|
|
|
tiadc_step_config(indio_dev);
|
|
tiadc_writel(adc_dev, REG_FIFO1THR, FIFO1_THRESHOLD);
|
|
mutex_init(&adc_dev->fifo1_lock);
|
|
|
|
err = tiadc_channel_init(&pdev->dev, indio_dev, adc_dev->channels);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = tiadc_iio_buffered_hardware_setup(&pdev->dev, indio_dev,
|
|
&tiadc_worker_h,
|
|
&tiadc_irq_h,
|
|
adc_dev->mfd_tscadc->irq,
|
|
IRQF_SHARED,
|
|
&tiadc_buffer_setup_ops);
|
|
if (err)
|
|
return err;
|
|
|
|
err = iio_device_register(indio_dev);
|
|
if (err)
|
|
return err;
|
|
|
|
platform_set_drvdata(pdev, indio_dev);
|
|
|
|
err = tiadc_request_dma(pdev, adc_dev);
|
|
if (err && err == -EPROBE_DEFER)
|
|
goto err_dma;
|
|
|
|
return 0;
|
|
|
|
err_dma:
|
|
iio_device_unregister(indio_dev);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int tiadc_remove(struct platform_device *pdev)
|
|
{
|
|
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
struct tiadc_dma *dma = &adc_dev->dma;
|
|
u32 step_en;
|
|
|
|
if (dma->chan) {
|
|
dma_free_coherent(dma->chan->device->dev, DMA_BUFFER_SIZE,
|
|
dma->buf, dma->addr);
|
|
dma_release_channel(dma->chan);
|
|
}
|
|
iio_device_unregister(indio_dev);
|
|
|
|
step_en = get_adc_step_mask(adc_dev);
|
|
am335x_tsc_se_clr(adc_dev->mfd_tscadc, step_en);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tiadc_suspend(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
unsigned int idle;
|
|
|
|
idle = tiadc_readl(adc_dev, REG_CTRL);
|
|
idle &= ~(CNTRLREG_SSENB);
|
|
tiadc_writel(adc_dev, REG_CTRL, idle | CNTRLREG_POWERDOWN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tiadc_resume(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct tiadc_device *adc_dev = iio_priv(indio_dev);
|
|
unsigned int restore;
|
|
|
|
/* Make sure ADC is powered up */
|
|
restore = tiadc_readl(adc_dev, REG_CTRL);
|
|
restore &= ~CNTRLREG_POWERDOWN;
|
|
tiadc_writel(adc_dev, REG_CTRL, restore);
|
|
|
|
tiadc_step_config(indio_dev);
|
|
am335x_tsc_se_set_cache(adc_dev->mfd_tscadc,
|
|
adc_dev->buffer_en_ch_steps);
|
|
return 0;
|
|
}
|
|
|
|
static DEFINE_SIMPLE_DEV_PM_OPS(tiadc_pm_ops, tiadc_suspend, tiadc_resume);
|
|
|
|
static const struct of_device_id ti_adc_dt_ids[] = {
|
|
{ .compatible = "ti,am3359-adc", },
|
|
{ .compatible = "ti,am4372-adc", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ti_adc_dt_ids);
|
|
|
|
static struct platform_driver tiadc_driver = {
|
|
.driver = {
|
|
.name = "TI-am335x-adc",
|
|
.pm = pm_sleep_ptr(&tiadc_pm_ops),
|
|
.of_match_table = ti_adc_dt_ids,
|
|
},
|
|
.probe = tiadc_probe,
|
|
.remove = tiadc_remove,
|
|
};
|
|
module_platform_driver(tiadc_driver);
|
|
|
|
MODULE_DESCRIPTION("TI ADC controller driver");
|
|
MODULE_AUTHOR("Rachna Patil <rachna@ti.com>");
|
|
MODULE_LICENSE("GPL");
|