375 строки
8.7 KiB
C
375 строки
8.7 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Copyright 2013 Emilio López
|
|
*
|
|
* Emilio López <emilio@elopez.com.ar>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "clk-factors.h"
|
|
|
|
/*
|
|
* sun4i_a10_get_mod0_factors() - calculates m, n factors for MOD0-style clocks
|
|
* MOD0 rate is calculated as follows
|
|
* rate = (parent_rate >> p) / (m + 1);
|
|
*/
|
|
|
|
static void sun4i_a10_get_mod0_factors(struct factors_request *req)
|
|
{
|
|
u8 div, calcm, calcp;
|
|
|
|
/* These clocks can only divide, so we will never be able to achieve
|
|
* frequencies higher than the parent frequency */
|
|
if (req->rate > req->parent_rate)
|
|
req->rate = req->parent_rate;
|
|
|
|
div = DIV_ROUND_UP(req->parent_rate, req->rate);
|
|
|
|
if (div < 16)
|
|
calcp = 0;
|
|
else if (div / 2 < 16)
|
|
calcp = 1;
|
|
else if (div / 4 < 16)
|
|
calcp = 2;
|
|
else
|
|
calcp = 3;
|
|
|
|
calcm = DIV_ROUND_UP(div, 1 << calcp);
|
|
|
|
req->rate = (req->parent_rate >> calcp) / calcm;
|
|
req->m = calcm - 1;
|
|
req->p = calcp;
|
|
}
|
|
|
|
/* user manual says "n" but it's really "p" */
|
|
static const struct clk_factors_config sun4i_a10_mod0_config = {
|
|
.mshift = 0,
|
|
.mwidth = 4,
|
|
.pshift = 16,
|
|
.pwidth = 2,
|
|
};
|
|
|
|
static const struct factors_data sun4i_a10_mod0_data = {
|
|
.enable = 31,
|
|
.mux = 24,
|
|
.muxmask = BIT(1) | BIT(0),
|
|
.table = &sun4i_a10_mod0_config,
|
|
.getter = sun4i_a10_get_mod0_factors,
|
|
};
|
|
|
|
static DEFINE_SPINLOCK(sun4i_a10_mod0_lock);
|
|
|
|
static void __init sun4i_a10_mod0_setup(struct device_node *node)
|
|
{
|
|
void __iomem *reg;
|
|
|
|
reg = of_iomap(node, 0);
|
|
if (!reg) {
|
|
/*
|
|
* This happens with mod0 clk nodes instantiated through
|
|
* mfd, as those do not have their resources assigned at
|
|
* CLK_OF_DECLARE time yet, so do not print an error.
|
|
*/
|
|
return;
|
|
}
|
|
|
|
sunxi_factors_register(node, &sun4i_a10_mod0_data,
|
|
&sun4i_a10_mod0_lock, reg);
|
|
}
|
|
CLK_OF_DECLARE_DRIVER(sun4i_a10_mod0, "allwinner,sun4i-a10-mod0-clk",
|
|
sun4i_a10_mod0_setup);
|
|
|
|
static int sun4i_a10_mod0_clk_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
void __iomem *reg;
|
|
|
|
if (!np)
|
|
return -ENODEV;
|
|
|
|
reg = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(reg))
|
|
return PTR_ERR(reg);
|
|
|
|
sunxi_factors_register(np, &sun4i_a10_mod0_data,
|
|
&sun4i_a10_mod0_lock, reg);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id sun4i_a10_mod0_clk_dt_ids[] = {
|
|
{ .compatible = "allwinner,sun4i-a10-mod0-clk" },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static struct platform_driver sun4i_a10_mod0_clk_driver = {
|
|
.driver = {
|
|
.name = "sun4i-a10-mod0-clk",
|
|
.of_match_table = sun4i_a10_mod0_clk_dt_ids,
|
|
},
|
|
.probe = sun4i_a10_mod0_clk_probe,
|
|
};
|
|
builtin_platform_driver(sun4i_a10_mod0_clk_driver);
|
|
|
|
static const struct factors_data sun9i_a80_mod0_data __initconst = {
|
|
.enable = 31,
|
|
.mux = 24,
|
|
.muxmask = BIT(3) | BIT(2) | BIT(1) | BIT(0),
|
|
.table = &sun4i_a10_mod0_config,
|
|
.getter = sun4i_a10_get_mod0_factors,
|
|
};
|
|
|
|
static void __init sun9i_a80_mod0_setup(struct device_node *node)
|
|
{
|
|
void __iomem *reg;
|
|
|
|
reg = of_io_request_and_map(node, 0, of_node_full_name(node));
|
|
if (IS_ERR(reg)) {
|
|
pr_err("Could not get registers for mod0-clk: %pOFn\n",
|
|
node);
|
|
return;
|
|
}
|
|
|
|
sunxi_factors_register(node, &sun9i_a80_mod0_data,
|
|
&sun4i_a10_mod0_lock, reg);
|
|
}
|
|
CLK_OF_DECLARE(sun9i_a80_mod0, "allwinner,sun9i-a80-mod0-clk", sun9i_a80_mod0_setup);
|
|
|
|
static DEFINE_SPINLOCK(sun5i_a13_mbus_lock);
|
|
|
|
static void __init sun5i_a13_mbus_setup(struct device_node *node)
|
|
{
|
|
void __iomem *reg;
|
|
|
|
reg = of_iomap(node, 0);
|
|
if (!reg) {
|
|
pr_err("Could not get registers for a13-mbus-clk\n");
|
|
return;
|
|
}
|
|
|
|
/* The MBUS clocks needs to be always enabled */
|
|
sunxi_factors_register_critical(node, &sun4i_a10_mod0_data,
|
|
&sun5i_a13_mbus_lock, reg);
|
|
}
|
|
CLK_OF_DECLARE(sun5i_a13_mbus, "allwinner,sun5i-a13-mbus-clk", sun5i_a13_mbus_setup);
|
|
|
|
struct mmc_phase {
|
|
struct clk_hw hw;
|
|
u8 offset;
|
|
void __iomem *reg;
|
|
spinlock_t *lock;
|
|
};
|
|
|
|
#define to_mmc_phase(_hw) container_of(_hw, struct mmc_phase, hw)
|
|
|
|
static int mmc_get_phase(struct clk_hw *hw)
|
|
{
|
|
struct clk *mmc, *mmc_parent, *clk = hw->clk;
|
|
struct mmc_phase *phase = to_mmc_phase(hw);
|
|
unsigned int mmc_rate, mmc_parent_rate;
|
|
u16 step, mmc_div;
|
|
u32 value;
|
|
u8 delay;
|
|
|
|
value = readl(phase->reg);
|
|
delay = (value >> phase->offset) & 0x3;
|
|
|
|
if (!delay)
|
|
return 180;
|
|
|
|
/* Get the main MMC clock */
|
|
mmc = clk_get_parent(clk);
|
|
if (!mmc)
|
|
return -EINVAL;
|
|
|
|
/* And its rate */
|
|
mmc_rate = clk_get_rate(mmc);
|
|
if (!mmc_rate)
|
|
return -EINVAL;
|
|
|
|
/* Now, get the MMC parent (most likely some PLL) */
|
|
mmc_parent = clk_get_parent(mmc);
|
|
if (!mmc_parent)
|
|
return -EINVAL;
|
|
|
|
/* And its rate */
|
|
mmc_parent_rate = clk_get_rate(mmc_parent);
|
|
if (!mmc_parent_rate)
|
|
return -EINVAL;
|
|
|
|
/* Get MMC clock divider */
|
|
mmc_div = mmc_parent_rate / mmc_rate;
|
|
|
|
step = DIV_ROUND_CLOSEST(360, mmc_div);
|
|
return delay * step;
|
|
}
|
|
|
|
static int mmc_set_phase(struct clk_hw *hw, int degrees)
|
|
{
|
|
struct clk *mmc, *mmc_parent, *clk = hw->clk;
|
|
struct mmc_phase *phase = to_mmc_phase(hw);
|
|
unsigned int mmc_rate, mmc_parent_rate;
|
|
unsigned long flags;
|
|
u32 value;
|
|
u8 delay;
|
|
|
|
/* Get the main MMC clock */
|
|
mmc = clk_get_parent(clk);
|
|
if (!mmc)
|
|
return -EINVAL;
|
|
|
|
/* And its rate */
|
|
mmc_rate = clk_get_rate(mmc);
|
|
if (!mmc_rate)
|
|
return -EINVAL;
|
|
|
|
/* Now, get the MMC parent (most likely some PLL) */
|
|
mmc_parent = clk_get_parent(mmc);
|
|
if (!mmc_parent)
|
|
return -EINVAL;
|
|
|
|
/* And its rate */
|
|
mmc_parent_rate = clk_get_rate(mmc_parent);
|
|
if (!mmc_parent_rate)
|
|
return -EINVAL;
|
|
|
|
if (degrees != 180) {
|
|
u16 step, mmc_div;
|
|
|
|
/* Get MMC clock divider */
|
|
mmc_div = mmc_parent_rate / mmc_rate;
|
|
|
|
/*
|
|
* We can only outphase the clocks by multiple of the
|
|
* PLL's period.
|
|
*
|
|
* Since the MMC clock in only a divider, and the
|
|
* formula to get the outphasing in degrees is deg =
|
|
* 360 * delta / period
|
|
*
|
|
* If we simplify this formula, we can see that the
|
|
* only thing that we're concerned about is the number
|
|
* of period we want to outphase our clock from, and
|
|
* the divider set by the MMC clock.
|
|
*/
|
|
step = DIV_ROUND_CLOSEST(360, mmc_div);
|
|
delay = DIV_ROUND_CLOSEST(degrees, step);
|
|
} else {
|
|
delay = 0;
|
|
}
|
|
|
|
spin_lock_irqsave(phase->lock, flags);
|
|
value = readl(phase->reg);
|
|
value &= ~GENMASK(phase->offset + 3, phase->offset);
|
|
value |= delay << phase->offset;
|
|
writel(value, phase->reg);
|
|
spin_unlock_irqrestore(phase->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops mmc_clk_ops = {
|
|
.get_phase = mmc_get_phase,
|
|
.set_phase = mmc_set_phase,
|
|
};
|
|
|
|
/*
|
|
* sunxi_mmc_setup - Common setup function for mmc module clocks
|
|
*
|
|
* The only difference between module clocks on different platforms is the
|
|
* width of the mux register bits and the valid values, which are passed in
|
|
* through struct factors_data. The phase clocks parts are identical.
|
|
*/
|
|
static void __init sunxi_mmc_setup(struct device_node *node,
|
|
const struct factors_data *data,
|
|
spinlock_t *lock)
|
|
{
|
|
struct clk_onecell_data *clk_data;
|
|
const char *parent;
|
|
void __iomem *reg;
|
|
int i;
|
|
|
|
reg = of_io_request_and_map(node, 0, of_node_full_name(node));
|
|
if (IS_ERR(reg)) {
|
|
pr_err("Couldn't map the %pOFn clock registers\n", node);
|
|
return;
|
|
}
|
|
|
|
clk_data = kmalloc(sizeof(*clk_data), GFP_KERNEL);
|
|
if (!clk_data)
|
|
return;
|
|
|
|
clk_data->clks = kcalloc(3, sizeof(*clk_data->clks), GFP_KERNEL);
|
|
if (!clk_data->clks)
|
|
goto err_free_data;
|
|
|
|
clk_data->clk_num = 3;
|
|
clk_data->clks[0] = sunxi_factors_register(node, data, lock, reg);
|
|
if (!clk_data->clks[0])
|
|
goto err_free_clks;
|
|
|
|
parent = __clk_get_name(clk_data->clks[0]);
|
|
|
|
for (i = 1; i < 3; i++) {
|
|
struct clk_init_data init = {
|
|
.num_parents = 1,
|
|
.parent_names = &parent,
|
|
.ops = &mmc_clk_ops,
|
|
};
|
|
struct mmc_phase *phase;
|
|
|
|
phase = kmalloc(sizeof(*phase), GFP_KERNEL);
|
|
if (!phase)
|
|
continue;
|
|
|
|
phase->hw.init = &init;
|
|
phase->reg = reg;
|
|
phase->lock = lock;
|
|
|
|
if (i == 1)
|
|
phase->offset = 8;
|
|
else
|
|
phase->offset = 20;
|
|
|
|
if (of_property_read_string_index(node, "clock-output-names",
|
|
i, &init.name))
|
|
init.name = node->name;
|
|
|
|
clk_data->clks[i] = clk_register(NULL, &phase->hw);
|
|
if (IS_ERR(clk_data->clks[i])) {
|
|
kfree(phase);
|
|
continue;
|
|
}
|
|
}
|
|
|
|
of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
|
|
|
|
return;
|
|
|
|
err_free_clks:
|
|
kfree(clk_data->clks);
|
|
err_free_data:
|
|
kfree(clk_data);
|
|
}
|
|
|
|
static DEFINE_SPINLOCK(sun4i_a10_mmc_lock);
|
|
|
|
static void __init sun4i_a10_mmc_setup(struct device_node *node)
|
|
{
|
|
sunxi_mmc_setup(node, &sun4i_a10_mod0_data, &sun4i_a10_mmc_lock);
|
|
}
|
|
CLK_OF_DECLARE(sun4i_a10_mmc, "allwinner,sun4i-a10-mmc-clk", sun4i_a10_mmc_setup);
|
|
|
|
static DEFINE_SPINLOCK(sun9i_a80_mmc_lock);
|
|
|
|
static void __init sun9i_a80_mmc_setup(struct device_node *node)
|
|
{
|
|
sunxi_mmc_setup(node, &sun9i_a80_mod0_data, &sun9i_a80_mmc_lock);
|
|
}
|
|
CLK_OF_DECLARE(sun9i_a80_mmc, "allwinner,sun9i-a80-mmc-clk", sun9i_a80_mmc_setup);
|