615 строки
16 KiB
C
615 строки
16 KiB
C
/*
|
|
* Driver for Digigram VXpocket soundcards
|
|
*
|
|
* lowlevel routines for VXpocket soundcards
|
|
*
|
|
* Copyright (c) 2002 by Takashi Iwai <tiwai@suse.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/io.h>
|
|
#include <sound/core.h>
|
|
#include "vxpocket.h"
|
|
|
|
|
|
static int vxp_reg_offset[VX_REG_MAX] = {
|
|
[VX_ICR] = 0x00, // ICR
|
|
[VX_CVR] = 0x01, // CVR
|
|
[VX_ISR] = 0x02, // ISR
|
|
[VX_IVR] = 0x03, // IVR
|
|
[VX_RXH] = 0x05, // RXH
|
|
[VX_RXM] = 0x06, // RXM
|
|
[VX_RXL] = 0x07, // RXL
|
|
[VX_DMA] = 0x04, // DMA
|
|
[VX_CDSP] = 0x08, // CDSP
|
|
[VX_LOFREQ] = 0x09, // LFREQ
|
|
[VX_HIFREQ] = 0x0a, // HFREQ
|
|
[VX_DATA] = 0x0b, // DATA
|
|
[VX_MICRO] = 0x0c, // MICRO
|
|
[VX_DIALOG] = 0x0d, // DIALOG
|
|
[VX_CSUER] = 0x0e, // CSUER
|
|
[VX_RUER] = 0x0f, // RUER
|
|
};
|
|
|
|
|
|
static inline unsigned long vxp_reg_addr(struct vx_core *_chip, int reg)
|
|
{
|
|
struct snd_vxpocket *chip = (struct snd_vxpocket *)_chip;
|
|
return chip->port + vxp_reg_offset[reg];
|
|
}
|
|
|
|
/*
|
|
* snd_vx_inb - read a byte from the register
|
|
* @offset: register offset
|
|
*/
|
|
static unsigned char vxp_inb(struct vx_core *chip, int offset)
|
|
{
|
|
return inb(vxp_reg_addr(chip, offset));
|
|
}
|
|
|
|
/*
|
|
* snd_vx_outb - write a byte on the register
|
|
* @offset: the register offset
|
|
* @val: the value to write
|
|
*/
|
|
static void vxp_outb(struct vx_core *chip, int offset, unsigned char val)
|
|
{
|
|
outb(val, vxp_reg_addr(chip, offset));
|
|
}
|
|
|
|
/*
|
|
* redefine macros to call directly
|
|
*/
|
|
#undef vx_inb
|
|
#define vx_inb(chip,reg) vxp_inb((struct vx_core *)(chip), VX_##reg)
|
|
#undef vx_outb
|
|
#define vx_outb(chip,reg,val) vxp_outb((struct vx_core *)(chip), VX_##reg,val)
|
|
|
|
|
|
/*
|
|
* vx_check_magic - check the magic word on xilinx
|
|
*
|
|
* returns zero if a magic word is detected, or a negative error code.
|
|
*/
|
|
static int vx_check_magic(struct vx_core *chip)
|
|
{
|
|
unsigned long end_time = jiffies + HZ / 5;
|
|
int c;
|
|
do {
|
|
c = vx_inb(chip, CDSP);
|
|
if (c == CDSP_MAGIC)
|
|
return 0;
|
|
msleep(10);
|
|
} while (time_after_eq(end_time, jiffies));
|
|
snd_printk(KERN_ERR "cannot find xilinx magic word (%x)\n", c);
|
|
return -EIO;
|
|
}
|
|
|
|
|
|
/*
|
|
* vx_reset_dsp - reset the DSP
|
|
*/
|
|
|
|
#define XX_DSP_RESET_WAIT_TIME 2 /* ms */
|
|
|
|
static void vxp_reset_dsp(struct vx_core *_chip)
|
|
{
|
|
struct snd_vxpocket *chip = (struct snd_vxpocket *)_chip;
|
|
|
|
/* set the reset dsp bit to 1 */
|
|
vx_outb(chip, CDSP, chip->regCDSP | VXP_CDSP_DSP_RESET_MASK);
|
|
vx_inb(chip, CDSP);
|
|
mdelay(XX_DSP_RESET_WAIT_TIME);
|
|
/* reset the bit */
|
|
chip->regCDSP &= ~VXP_CDSP_DSP_RESET_MASK;
|
|
vx_outb(chip, CDSP, chip->regCDSP);
|
|
vx_inb(chip, CDSP);
|
|
mdelay(XX_DSP_RESET_WAIT_TIME);
|
|
}
|
|
|
|
/*
|
|
* reset codec bit
|
|
*/
|
|
static void vxp_reset_codec(struct vx_core *_chip)
|
|
{
|
|
struct snd_vxpocket *chip = (struct snd_vxpocket *)_chip;
|
|
|
|
/* Set the reset CODEC bit to 1. */
|
|
vx_outb(chip, CDSP, chip->regCDSP | VXP_CDSP_CODEC_RESET_MASK);
|
|
vx_inb(chip, CDSP);
|
|
msleep(10);
|
|
/* Set the reset CODEC bit to 0. */
|
|
chip->regCDSP &= ~VXP_CDSP_CODEC_RESET_MASK;
|
|
vx_outb(chip, CDSP, chip->regCDSP);
|
|
vx_inb(chip, CDSP);
|
|
msleep(1);
|
|
}
|
|
|
|
/*
|
|
* vx_load_xilinx_binary - load the xilinx binary image
|
|
* the binary image is the binary array converted from the bitstream file.
|
|
*/
|
|
static int vxp_load_xilinx_binary(struct vx_core *_chip, const struct firmware *fw)
|
|
{
|
|
struct snd_vxpocket *chip = (struct snd_vxpocket *)_chip;
|
|
unsigned int i;
|
|
int c;
|
|
int regCSUER, regRUER;
|
|
const unsigned char *image;
|
|
unsigned char data;
|
|
|
|
/* Switch to programmation mode */
|
|
chip->regDIALOG |= VXP_DLG_XILINX_REPROG_MASK;
|
|
vx_outb(chip, DIALOG, chip->regDIALOG);
|
|
|
|
/* Save register CSUER and RUER */
|
|
regCSUER = vx_inb(chip, CSUER);
|
|
regRUER = vx_inb(chip, RUER);
|
|
|
|
/* reset HF0 and HF1 */
|
|
vx_outb(chip, ICR, 0);
|
|
|
|
/* Wait for answer HF2 equal to 1 */
|
|
snd_printdd(KERN_DEBUG "check ISR_HF2\n");
|
|
if (vx_check_isr(_chip, ISR_HF2, ISR_HF2, 20) < 0)
|
|
goto _error;
|
|
|
|
/* set HF1 for loading xilinx binary */
|
|
vx_outb(chip, ICR, ICR_HF1);
|
|
image = fw->data;
|
|
for (i = 0; i < fw->size; i++, image++) {
|
|
data = *image;
|
|
if (vx_wait_isr_bit(_chip, ISR_TX_EMPTY) < 0)
|
|
goto _error;
|
|
vx_outb(chip, TXL, data);
|
|
/* wait for reading */
|
|
if (vx_wait_for_rx_full(_chip) < 0)
|
|
goto _error;
|
|
c = vx_inb(chip, RXL);
|
|
if (c != (int)data)
|
|
snd_printk(KERN_ERR "vxpocket: load xilinx mismatch at %d: 0x%x != 0x%x\n", i, c, (int)data);
|
|
}
|
|
|
|
/* reset HF1 */
|
|
vx_outb(chip, ICR, 0);
|
|
|
|
/* wait for HF3 */
|
|
if (vx_check_isr(_chip, ISR_HF3, ISR_HF3, 20) < 0)
|
|
goto _error;
|
|
|
|
/* read the number of bytes received */
|
|
if (vx_wait_for_rx_full(_chip) < 0)
|
|
goto _error;
|
|
|
|
c = (int)vx_inb(chip, RXH) << 16;
|
|
c |= (int)vx_inb(chip, RXM) << 8;
|
|
c |= vx_inb(chip, RXL);
|
|
|
|
snd_printdd(KERN_DEBUG "xilinx: dsp size received 0x%x, orig 0x%Zx\n", c, fw->size);
|
|
|
|
vx_outb(chip, ICR, ICR_HF0);
|
|
|
|
/* TEMPO 250ms : wait until Xilinx is downloaded */
|
|
msleep(300);
|
|
|
|
/* test magical word */
|
|
if (vx_check_magic(_chip) < 0)
|
|
goto _error;
|
|
|
|
/* Restore register 0x0E and 0x0F (thus replacing COR and FCSR) */
|
|
vx_outb(chip, CSUER, regCSUER);
|
|
vx_outb(chip, RUER, regRUER);
|
|
|
|
/* Reset the Xilinx's signal enabling IO access */
|
|
chip->regDIALOG |= VXP_DLG_XILINX_REPROG_MASK;
|
|
vx_outb(chip, DIALOG, chip->regDIALOG);
|
|
vx_inb(chip, DIALOG);
|
|
msleep(10);
|
|
chip->regDIALOG &= ~VXP_DLG_XILINX_REPROG_MASK;
|
|
vx_outb(chip, DIALOG, chip->regDIALOG);
|
|
vx_inb(chip, DIALOG);
|
|
|
|
/* Reset of the Codec */
|
|
vxp_reset_codec(_chip);
|
|
vx_reset_dsp(_chip);
|
|
|
|
return 0;
|
|
|
|
_error:
|
|
vx_outb(chip, CSUER, regCSUER);
|
|
vx_outb(chip, RUER, regRUER);
|
|
chip->regDIALOG &= ~VXP_DLG_XILINX_REPROG_MASK;
|
|
vx_outb(chip, DIALOG, chip->regDIALOG);
|
|
return -EIO;
|
|
}
|
|
|
|
|
|
/*
|
|
* vxp_load_dsp - load_dsp callback
|
|
*/
|
|
static int vxp_load_dsp(struct vx_core *vx, int index, const struct firmware *fw)
|
|
{
|
|
int err;
|
|
|
|
switch (index) {
|
|
case 0:
|
|
/* xilinx boot */
|
|
if ((err = vx_check_magic(vx)) < 0)
|
|
return err;
|
|
if ((err = snd_vx_load_boot_image(vx, fw)) < 0)
|
|
return err;
|
|
return 0;
|
|
case 1:
|
|
/* xilinx image */
|
|
return vxp_load_xilinx_binary(vx, fw);
|
|
case 2:
|
|
/* DSP boot */
|
|
return snd_vx_dsp_boot(vx, fw);
|
|
case 3:
|
|
/* DSP image */
|
|
return snd_vx_dsp_load(vx, fw);
|
|
default:
|
|
snd_BUG();
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* vx_test_and_ack - test and acknowledge interrupt
|
|
*
|
|
* called from irq hander, too
|
|
*
|
|
* spinlock held!
|
|
*/
|
|
static int vxp_test_and_ack(struct vx_core *_chip)
|
|
{
|
|
struct snd_vxpocket *chip = (struct snd_vxpocket *)_chip;
|
|
|
|
/* not booted yet? */
|
|
if (! (_chip->chip_status & VX_STAT_XILINX_LOADED))
|
|
return -ENXIO;
|
|
|
|
if (! (vx_inb(chip, DIALOG) & VXP_DLG_MEMIRQ_MASK))
|
|
return -EIO;
|
|
|
|
/* ok, interrupts generated, now ack it */
|
|
/* set ACQUIT bit up and down */
|
|
vx_outb(chip, DIALOG, chip->regDIALOG | VXP_DLG_ACK_MEMIRQ_MASK);
|
|
/* useless read just to spend some time and maintain
|
|
* the ACQUIT signal up for a while ( a bus cycle )
|
|
*/
|
|
vx_inb(chip, DIALOG);
|
|
vx_outb(chip, DIALOG, chip->regDIALOG & ~VXP_DLG_ACK_MEMIRQ_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* vx_validate_irq - enable/disable IRQ
|
|
*/
|
|
static void vxp_validate_irq(struct vx_core *_chip, int enable)
|
|
{
|
|
struct snd_vxpocket *chip = (struct snd_vxpocket *)_chip;
|
|
|
|
/* Set the interrupt enable bit to 1 in CDSP register */
|
|
if (enable)
|
|
chip->regCDSP |= VXP_CDSP_VALID_IRQ_MASK;
|
|
else
|
|
chip->regCDSP &= ~VXP_CDSP_VALID_IRQ_MASK;
|
|
vx_outb(chip, CDSP, chip->regCDSP);
|
|
}
|
|
|
|
/*
|
|
* vx_setup_pseudo_dma - set up the pseudo dma read/write mode.
|
|
* @do_write: 0 = read, 1 = set up for DMA write
|
|
*/
|
|
static void vx_setup_pseudo_dma(struct vx_core *_chip, int do_write)
|
|
{
|
|
struct snd_vxpocket *chip = (struct snd_vxpocket *)_chip;
|
|
|
|
/* Interrupt mode and HREQ pin enabled for host transmit / receive data transfers */
|
|
vx_outb(chip, ICR, do_write ? ICR_TREQ : ICR_RREQ);
|
|
/* Reset the pseudo-dma register */
|
|
vx_inb(chip, ISR);
|
|
vx_outb(chip, ISR, 0);
|
|
|
|
/* Select DMA in read/write transfer mode and in 16-bit accesses */
|
|
chip->regDIALOG |= VXP_DLG_DMA16_SEL_MASK;
|
|
chip->regDIALOG |= do_write ? VXP_DLG_DMAWRITE_SEL_MASK : VXP_DLG_DMAREAD_SEL_MASK;
|
|
vx_outb(chip, DIALOG, chip->regDIALOG);
|
|
|
|
}
|
|
|
|
/*
|
|
* vx_release_pseudo_dma - disable the pseudo-DMA mode
|
|
*/
|
|
static void vx_release_pseudo_dma(struct vx_core *_chip)
|
|
{
|
|
struct snd_vxpocket *chip = (struct snd_vxpocket *)_chip;
|
|
|
|
/* Disable DMA and 16-bit accesses */
|
|
chip->regDIALOG &= ~(VXP_DLG_DMAWRITE_SEL_MASK|
|
|
VXP_DLG_DMAREAD_SEL_MASK|
|
|
VXP_DLG_DMA16_SEL_MASK);
|
|
vx_outb(chip, DIALOG, chip->regDIALOG);
|
|
/* HREQ pin disabled. */
|
|
vx_outb(chip, ICR, 0);
|
|
}
|
|
|
|
/*
|
|
* vx_pseudo_dma_write - write bulk data on pseudo-DMA mode
|
|
* @count: data length to transfer in bytes
|
|
*
|
|
* data size must be aligned to 6 bytes to ensure the 24bit alignment on DSP.
|
|
* NB: call with a certain lock!
|
|
*/
|
|
static void vxp_dma_write(struct vx_core *chip, struct snd_pcm_runtime *runtime,
|
|
struct vx_pipe *pipe, int count)
|
|
{
|
|
long port = vxp_reg_addr(chip, VX_DMA);
|
|
int offset = pipe->hw_ptr;
|
|
unsigned short *addr = (unsigned short *)(runtime->dma_area + offset);
|
|
|
|
vx_setup_pseudo_dma(chip, 1);
|
|
if (offset + count > pipe->buffer_bytes) {
|
|
int length = pipe->buffer_bytes - offset;
|
|
count -= length;
|
|
length >>= 1; /* in 16bit words */
|
|
/* Transfer using pseudo-dma. */
|
|
while (length-- > 0) {
|
|
outw(cpu_to_le16(*addr), port);
|
|
addr++;
|
|
}
|
|
addr = (unsigned short *)runtime->dma_area;
|
|
pipe->hw_ptr = 0;
|
|
}
|
|
pipe->hw_ptr += count;
|
|
count >>= 1; /* in 16bit words */
|
|
/* Transfer using pseudo-dma. */
|
|
while (count-- > 0) {
|
|
outw(cpu_to_le16(*addr), port);
|
|
addr++;
|
|
}
|
|
vx_release_pseudo_dma(chip);
|
|
}
|
|
|
|
|
|
/*
|
|
* vx_pseudo_dma_read - read bulk data on pseudo DMA mode
|
|
* @offset: buffer offset in bytes
|
|
* @count: data length to transfer in bytes
|
|
*
|
|
* the read length must be aligned to 6 bytes, as well as write.
|
|
* NB: call with a certain lock!
|
|
*/
|
|
static void vxp_dma_read(struct vx_core *chip, struct snd_pcm_runtime *runtime,
|
|
struct vx_pipe *pipe, int count)
|
|
{
|
|
struct snd_vxpocket *pchip = (struct snd_vxpocket *)chip;
|
|
long port = vxp_reg_addr(chip, VX_DMA);
|
|
int offset = pipe->hw_ptr;
|
|
unsigned short *addr = (unsigned short *)(runtime->dma_area + offset);
|
|
|
|
if (snd_BUG_ON(count % 2))
|
|
return;
|
|
vx_setup_pseudo_dma(chip, 0);
|
|
if (offset + count > pipe->buffer_bytes) {
|
|
int length = pipe->buffer_bytes - offset;
|
|
count -= length;
|
|
length >>= 1; /* in 16bit words */
|
|
/* Transfer using pseudo-dma. */
|
|
while (length-- > 0)
|
|
*addr++ = le16_to_cpu(inw(port));
|
|
addr = (unsigned short *)runtime->dma_area;
|
|
pipe->hw_ptr = 0;
|
|
}
|
|
pipe->hw_ptr += count;
|
|
count >>= 1; /* in 16bit words */
|
|
/* Transfer using pseudo-dma. */
|
|
while (count-- > 1)
|
|
*addr++ = le16_to_cpu(inw(port));
|
|
/* Disable DMA */
|
|
pchip->regDIALOG &= ~VXP_DLG_DMAREAD_SEL_MASK;
|
|
vx_outb(chip, DIALOG, pchip->regDIALOG);
|
|
/* Read the last word (16 bits) */
|
|
*addr = le16_to_cpu(inw(port));
|
|
/* Disable 16-bit accesses */
|
|
pchip->regDIALOG &= ~VXP_DLG_DMA16_SEL_MASK;
|
|
vx_outb(chip, DIALOG, pchip->regDIALOG);
|
|
/* HREQ pin disabled. */
|
|
vx_outb(chip, ICR, 0);
|
|
}
|
|
|
|
|
|
/*
|
|
* write a codec data (24bit)
|
|
*/
|
|
static void vxp_write_codec_reg(struct vx_core *chip, int codec, unsigned int data)
|
|
{
|
|
int i;
|
|
|
|
/* Activate access to the corresponding codec register */
|
|
if (! codec)
|
|
vx_inb(chip, LOFREQ);
|
|
else
|
|
vx_inb(chip, CODEC2);
|
|
|
|
/* We have to send 24 bits (3 x 8 bits). Start with most signif. Bit */
|
|
for (i = 0; i < 24; i++, data <<= 1)
|
|
vx_outb(chip, DATA, ((data & 0x800000) ? VX_DATA_CODEC_MASK : 0));
|
|
|
|
/* Terminate access to codec registers */
|
|
vx_inb(chip, HIFREQ);
|
|
}
|
|
|
|
|
|
/*
|
|
* vx_set_mic_boost - set mic boost level (on vxp440 only)
|
|
* @boost: 0 = 20dB, 1 = +38dB
|
|
*/
|
|
void vx_set_mic_boost(struct vx_core *chip, int boost)
|
|
{
|
|
struct snd_vxpocket *pchip = (struct snd_vxpocket *)chip;
|
|
unsigned long flags;
|
|
|
|
if (chip->chip_status & VX_STAT_IS_STALE)
|
|
return;
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
if (pchip->regCDSP & P24_CDSP_MICS_SEL_MASK) {
|
|
if (boost) {
|
|
/* boost: 38 dB */
|
|
pchip->regCDSP &= ~P24_CDSP_MIC20_SEL_MASK;
|
|
pchip->regCDSP |= P24_CDSP_MIC38_SEL_MASK;
|
|
} else {
|
|
/* minimum value: 20 dB */
|
|
pchip->regCDSP |= P24_CDSP_MIC20_SEL_MASK;
|
|
pchip->regCDSP &= ~P24_CDSP_MIC38_SEL_MASK;
|
|
}
|
|
vx_outb(chip, CDSP, pchip->regCDSP);
|
|
}
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
}
|
|
|
|
/*
|
|
* remap the linear value (0-8) to the actual value (0-15)
|
|
*/
|
|
static int vx_compute_mic_level(int level)
|
|
{
|
|
switch (level) {
|
|
case 5: level = 6 ; break;
|
|
case 6: level = 8 ; break;
|
|
case 7: level = 11; break;
|
|
case 8: level = 15; break;
|
|
default: break ;
|
|
}
|
|
return level;
|
|
}
|
|
|
|
/*
|
|
* vx_set_mic_level - set mic level (on vxpocket only)
|
|
* @level: the mic level = 0 - 8 (max)
|
|
*/
|
|
void vx_set_mic_level(struct vx_core *chip, int level)
|
|
{
|
|
struct snd_vxpocket *pchip = (struct snd_vxpocket *)chip;
|
|
unsigned long flags;
|
|
|
|
if (chip->chip_status & VX_STAT_IS_STALE)
|
|
return;
|
|
|
|
spin_lock_irqsave(&chip->lock, flags);
|
|
if (pchip->regCDSP & VXP_CDSP_MIC_SEL_MASK) {
|
|
level = vx_compute_mic_level(level);
|
|
vx_outb(chip, MICRO, level);
|
|
}
|
|
spin_unlock_irqrestore(&chip->lock, flags);
|
|
}
|
|
|
|
|
|
/*
|
|
* change the input audio source
|
|
*/
|
|
static void vxp_change_audio_source(struct vx_core *_chip, int src)
|
|
{
|
|
struct snd_vxpocket *chip = (struct snd_vxpocket *)_chip;
|
|
|
|
switch (src) {
|
|
case VX_AUDIO_SRC_DIGITAL:
|
|
chip->regCDSP |= VXP_CDSP_DATAIN_SEL_MASK;
|
|
vx_outb(chip, CDSP, chip->regCDSP);
|
|
break;
|
|
case VX_AUDIO_SRC_LINE:
|
|
chip->regCDSP &= ~VXP_CDSP_DATAIN_SEL_MASK;
|
|
if (_chip->type == VX_TYPE_VXP440)
|
|
chip->regCDSP &= ~P24_CDSP_MICS_SEL_MASK;
|
|
else
|
|
chip->regCDSP &= ~VXP_CDSP_MIC_SEL_MASK;
|
|
vx_outb(chip, CDSP, chip->regCDSP);
|
|
break;
|
|
case VX_AUDIO_SRC_MIC:
|
|
chip->regCDSP &= ~VXP_CDSP_DATAIN_SEL_MASK;
|
|
/* reset mic levels */
|
|
if (_chip->type == VX_TYPE_VXP440) {
|
|
chip->regCDSP &= ~P24_CDSP_MICS_SEL_MASK;
|
|
if (chip->mic_level)
|
|
chip->regCDSP |= P24_CDSP_MIC38_SEL_MASK;
|
|
else
|
|
chip->regCDSP |= P24_CDSP_MIC20_SEL_MASK;
|
|
vx_outb(chip, CDSP, chip->regCDSP);
|
|
} else {
|
|
chip->regCDSP |= VXP_CDSP_MIC_SEL_MASK;
|
|
vx_outb(chip, CDSP, chip->regCDSP);
|
|
vx_outb(chip, MICRO, vx_compute_mic_level(chip->mic_level));
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* change the clock source
|
|
* source = INTERNAL_QUARTZ or UER_SYNC
|
|
*/
|
|
static void vxp_set_clock_source(struct vx_core *_chip, int source)
|
|
{
|
|
struct snd_vxpocket *chip = (struct snd_vxpocket *)_chip;
|
|
|
|
if (source == INTERNAL_QUARTZ)
|
|
chip->regCDSP &= ~VXP_CDSP_CLOCKIN_SEL_MASK;
|
|
else
|
|
chip->regCDSP |= VXP_CDSP_CLOCKIN_SEL_MASK;
|
|
vx_outb(chip, CDSP, chip->regCDSP);
|
|
}
|
|
|
|
|
|
/*
|
|
* reset the board
|
|
*/
|
|
static void vxp_reset_board(struct vx_core *_chip, int cold_reset)
|
|
{
|
|
struct snd_vxpocket *chip = (struct snd_vxpocket *)_chip;
|
|
|
|
chip->regCDSP = 0;
|
|
chip->regDIALOG = 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* callbacks
|
|
*/
|
|
/* exported */
|
|
struct snd_vx_ops snd_vxpocket_ops = {
|
|
.in8 = vxp_inb,
|
|
.out8 = vxp_outb,
|
|
.test_and_ack = vxp_test_and_ack,
|
|
.validate_irq = vxp_validate_irq,
|
|
.write_codec = vxp_write_codec_reg,
|
|
.reset_codec = vxp_reset_codec,
|
|
.change_audio_source = vxp_change_audio_source,
|
|
.set_clock_source = vxp_set_clock_source,
|
|
.load_dsp = vxp_load_dsp,
|
|
.add_controls = vxp_add_mic_controls,
|
|
.reset_dsp = vxp_reset_dsp,
|
|
.reset_board = vxp_reset_board,
|
|
.dma_write = vxp_dma_write,
|
|
.dma_read = vxp_dma_read,
|
|
};
|