819 строки
20 KiB
C
819 строки
20 KiB
C
/*
|
|
* Copyright 2001-2003 SuSE Labs.
|
|
* Distributed under the GNU public license, v2.
|
|
*
|
|
* This is a GART driver for the AMD Opteron/Athlon64 on-CPU northbridge.
|
|
* It also includes support for the AMD 8151 AGP bridge,
|
|
* although it doesn't actually do much, as all the real
|
|
* work is done in the northbridge(s).
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/agp_backend.h>
|
|
#include <linux/mmzone.h>
|
|
#include <asm/page.h> /* PAGE_SIZE */
|
|
#include <asm/e820.h>
|
|
#include <asm/amd_nb.h>
|
|
#include <asm/gart.h>
|
|
#include "agp.h"
|
|
|
|
/* NVIDIA K8 registers */
|
|
#define NVIDIA_X86_64_0_APBASE 0x10
|
|
#define NVIDIA_X86_64_1_APBASE1 0x50
|
|
#define NVIDIA_X86_64_1_APLIMIT1 0x54
|
|
#define NVIDIA_X86_64_1_APSIZE 0xa8
|
|
#define NVIDIA_X86_64_1_APBASE2 0xd8
|
|
#define NVIDIA_X86_64_1_APLIMIT2 0xdc
|
|
|
|
/* ULi K8 registers */
|
|
#define ULI_X86_64_BASE_ADDR 0x10
|
|
#define ULI_X86_64_HTT_FEA_REG 0x50
|
|
#define ULI_X86_64_ENU_SCR_REG 0x54
|
|
|
|
static struct resource *aperture_resource;
|
|
static bool __initdata agp_try_unsupported = 1;
|
|
static int agp_bridges_found;
|
|
|
|
static void amd64_tlbflush(struct agp_memory *temp)
|
|
{
|
|
amd_flush_garts();
|
|
}
|
|
|
|
static int amd64_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
|
|
{
|
|
int i, j, num_entries;
|
|
long long tmp;
|
|
int mask_type;
|
|
struct agp_bridge_data *bridge = mem->bridge;
|
|
u32 pte;
|
|
|
|
num_entries = agp_num_entries();
|
|
|
|
if (type != mem->type)
|
|
return -EINVAL;
|
|
mask_type = bridge->driver->agp_type_to_mask_type(bridge, type);
|
|
if (mask_type != 0)
|
|
return -EINVAL;
|
|
|
|
|
|
/* Make sure we can fit the range in the gatt table. */
|
|
/* FIXME: could wrap */
|
|
if (((unsigned long)pg_start + mem->page_count) > num_entries)
|
|
return -EINVAL;
|
|
|
|
j = pg_start;
|
|
|
|
/* gatt table should be empty. */
|
|
while (j < (pg_start + mem->page_count)) {
|
|
if (!PGE_EMPTY(agp_bridge, readl(agp_bridge->gatt_table+j)))
|
|
return -EBUSY;
|
|
j++;
|
|
}
|
|
|
|
if (!mem->is_flushed) {
|
|
global_cache_flush();
|
|
mem->is_flushed = true;
|
|
}
|
|
|
|
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
|
|
tmp = agp_bridge->driver->mask_memory(agp_bridge,
|
|
page_to_phys(mem->pages[i]),
|
|
mask_type);
|
|
|
|
BUG_ON(tmp & 0xffffff0000000ffcULL);
|
|
pte = (tmp & 0x000000ff00000000ULL) >> 28;
|
|
pte |=(tmp & 0x00000000fffff000ULL);
|
|
pte |= GPTE_VALID | GPTE_COHERENT;
|
|
|
|
writel(pte, agp_bridge->gatt_table+j);
|
|
readl(agp_bridge->gatt_table+j); /* PCI Posting. */
|
|
}
|
|
amd64_tlbflush(mem);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This hack alters the order element according
|
|
* to the size of a long. It sucks. I totally disown this, even
|
|
* though it does appear to work for the most part.
|
|
*/
|
|
static struct aper_size_info_32 amd64_aperture_sizes[7] =
|
|
{
|
|
{32, 8192, 3+(sizeof(long)/8), 0 },
|
|
{64, 16384, 4+(sizeof(long)/8), 1<<1 },
|
|
{128, 32768, 5+(sizeof(long)/8), 1<<2 },
|
|
{256, 65536, 6+(sizeof(long)/8), 1<<1 | 1<<2 },
|
|
{512, 131072, 7+(sizeof(long)/8), 1<<3 },
|
|
{1024, 262144, 8+(sizeof(long)/8), 1<<1 | 1<<3},
|
|
{2048, 524288, 9+(sizeof(long)/8), 1<<2 | 1<<3}
|
|
};
|
|
|
|
|
|
/*
|
|
* Get the current Aperture size from the x86-64.
|
|
* Note, that there may be multiple x86-64's, but we just return
|
|
* the value from the first one we find. The set_size functions
|
|
* keep the rest coherent anyway. Or at least should do.
|
|
*/
|
|
static int amd64_fetch_size(void)
|
|
{
|
|
struct pci_dev *dev;
|
|
int i;
|
|
u32 temp;
|
|
struct aper_size_info_32 *values;
|
|
|
|
dev = node_to_amd_nb(0)->misc;
|
|
if (dev==NULL)
|
|
return 0;
|
|
|
|
pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &temp);
|
|
temp = (temp & 0xe);
|
|
values = A_SIZE_32(amd64_aperture_sizes);
|
|
|
|
for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) {
|
|
if (temp == values[i].size_value) {
|
|
agp_bridge->previous_size =
|
|
agp_bridge->current_size = (void *) (values + i);
|
|
|
|
agp_bridge->aperture_size_idx = i;
|
|
return values[i].size;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* In a multiprocessor x86-64 system, this function gets
|
|
* called once for each CPU.
|
|
*/
|
|
static u64 amd64_configure(struct pci_dev *hammer, u64 gatt_table)
|
|
{
|
|
u64 aperturebase;
|
|
u32 tmp;
|
|
u64 aper_base;
|
|
|
|
/* Address to map to */
|
|
pci_read_config_dword(hammer, AMD64_GARTAPERTUREBASE, &tmp);
|
|
aperturebase = tmp << 25;
|
|
aper_base = (aperturebase & PCI_BASE_ADDRESS_MEM_MASK);
|
|
|
|
enable_gart_translation(hammer, gatt_table);
|
|
|
|
return aper_base;
|
|
}
|
|
|
|
|
|
static const struct aper_size_info_32 amd_8151_sizes[7] =
|
|
{
|
|
{2048, 524288, 9, 0x00000000 }, /* 0 0 0 0 0 0 */
|
|
{1024, 262144, 8, 0x00000400 }, /* 1 0 0 0 0 0 */
|
|
{512, 131072, 7, 0x00000600 }, /* 1 1 0 0 0 0 */
|
|
{256, 65536, 6, 0x00000700 }, /* 1 1 1 0 0 0 */
|
|
{128, 32768, 5, 0x00000720 }, /* 1 1 1 1 0 0 */
|
|
{64, 16384, 4, 0x00000730 }, /* 1 1 1 1 1 0 */
|
|
{32, 8192, 3, 0x00000738 } /* 1 1 1 1 1 1 */
|
|
};
|
|
|
|
static int amd_8151_configure(void)
|
|
{
|
|
unsigned long gatt_bus = virt_to_phys(agp_bridge->gatt_table_real);
|
|
int i;
|
|
|
|
if (!amd_nb_has_feature(AMD_NB_GART))
|
|
return 0;
|
|
|
|
/* Configure AGP regs in each x86-64 host bridge. */
|
|
for (i = 0; i < amd_nb_num(); i++) {
|
|
agp_bridge->gart_bus_addr =
|
|
amd64_configure(node_to_amd_nb(i)->misc, gatt_bus);
|
|
}
|
|
amd_flush_garts();
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void amd64_cleanup(void)
|
|
{
|
|
u32 tmp;
|
|
int i;
|
|
|
|
if (!amd_nb_has_feature(AMD_NB_GART))
|
|
return;
|
|
|
|
for (i = 0; i < amd_nb_num(); i++) {
|
|
struct pci_dev *dev = node_to_amd_nb(i)->misc;
|
|
/* disable gart translation */
|
|
pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &tmp);
|
|
tmp &= ~GARTEN;
|
|
pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, tmp);
|
|
}
|
|
}
|
|
|
|
|
|
static const struct agp_bridge_driver amd_8151_driver = {
|
|
.owner = THIS_MODULE,
|
|
.aperture_sizes = amd_8151_sizes,
|
|
.size_type = U32_APER_SIZE,
|
|
.num_aperture_sizes = 7,
|
|
.needs_scratch_page = true,
|
|
.configure = amd_8151_configure,
|
|
.fetch_size = amd64_fetch_size,
|
|
.cleanup = amd64_cleanup,
|
|
.tlb_flush = amd64_tlbflush,
|
|
.mask_memory = agp_generic_mask_memory,
|
|
.masks = NULL,
|
|
.agp_enable = agp_generic_enable,
|
|
.cache_flush = global_cache_flush,
|
|
.create_gatt_table = agp_generic_create_gatt_table,
|
|
.free_gatt_table = agp_generic_free_gatt_table,
|
|
.insert_memory = amd64_insert_memory,
|
|
.remove_memory = agp_generic_remove_memory,
|
|
.alloc_by_type = agp_generic_alloc_by_type,
|
|
.free_by_type = agp_generic_free_by_type,
|
|
.agp_alloc_page = agp_generic_alloc_page,
|
|
.agp_alloc_pages = agp_generic_alloc_pages,
|
|
.agp_destroy_page = agp_generic_destroy_page,
|
|
.agp_destroy_pages = agp_generic_destroy_pages,
|
|
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
|
|
};
|
|
|
|
/* Some basic sanity checks for the aperture. */
|
|
static int agp_aperture_valid(u64 aper, u32 size)
|
|
{
|
|
if (!aperture_valid(aper, size, 32*1024*1024))
|
|
return 0;
|
|
|
|
/* Request the Aperture. This catches cases when someone else
|
|
already put a mapping in there - happens with some very broken BIOS
|
|
|
|
Maybe better to use pci_assign_resource/pci_enable_device instead
|
|
trusting the bridges? */
|
|
if (!aperture_resource &&
|
|
!(aperture_resource = request_mem_region(aper, size, "aperture"))) {
|
|
printk(KERN_ERR PFX "Aperture conflicts with PCI mapping.\n");
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* W*s centric BIOS sometimes only set up the aperture in the AGP
|
|
* bridge, not the northbridge. On AMD64 this is handled early
|
|
* in aperture.c, but when IOMMU is not enabled or we run
|
|
* on a 32bit kernel this needs to be redone.
|
|
* Unfortunately it is impossible to fix the aperture here because it's too late
|
|
* to allocate that much memory. But at least error out cleanly instead of
|
|
* crashing.
|
|
*/
|
|
static int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp, u16 cap)
|
|
{
|
|
u64 aper, nb_aper;
|
|
int order = 0;
|
|
u32 nb_order, nb_base;
|
|
u16 apsize;
|
|
|
|
pci_read_config_dword(nb, AMD64_GARTAPERTURECTL, &nb_order);
|
|
nb_order = (nb_order >> 1) & 7;
|
|
pci_read_config_dword(nb, AMD64_GARTAPERTUREBASE, &nb_base);
|
|
nb_aper = nb_base << 25;
|
|
|
|
/* Northbridge seems to contain crap. Try the AGP bridge. */
|
|
|
|
pci_read_config_word(agp, cap+0x14, &apsize);
|
|
if (apsize == 0xffff) {
|
|
if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order))
|
|
return 0;
|
|
return -1;
|
|
}
|
|
|
|
apsize &= 0xfff;
|
|
/* Some BIOS use weird encodings not in the AGPv3 table. */
|
|
if (apsize & 0xff)
|
|
apsize |= 0xf00;
|
|
order = 7 - hweight16(apsize);
|
|
|
|
aper = pci_bus_address(agp, AGP_APERTURE_BAR);
|
|
|
|
/*
|
|
* On some sick chips APSIZE is 0. This means it wants 4G
|
|
* so let double check that order, and lets trust the AMD NB settings
|
|
*/
|
|
if (order >=0 && aper + (32ULL<<(20 + order)) > 0x100000000ULL) {
|
|
dev_info(&agp->dev, "aperture size %u MB is not right, using settings from NB\n",
|
|
32 << order);
|
|
order = nb_order;
|
|
}
|
|
|
|
if (nb_order >= order) {
|
|
if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order))
|
|
return 0;
|
|
}
|
|
|
|
dev_info(&agp->dev, "aperture from AGP @ %Lx size %u MB\n",
|
|
aper, 32 << order);
|
|
if (order < 0 || !agp_aperture_valid(aper, (32*1024*1024)<<order))
|
|
return -1;
|
|
|
|
gart_set_size_and_enable(nb, order);
|
|
pci_write_config_dword(nb, AMD64_GARTAPERTUREBASE, aper >> 25);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cache_nbs(struct pci_dev *pdev, u32 cap_ptr)
|
|
{
|
|
int i;
|
|
|
|
if (amd_cache_northbridges() < 0)
|
|
return -ENODEV;
|
|
|
|
if (!amd_nb_has_feature(AMD_NB_GART))
|
|
return -ENODEV;
|
|
|
|
i = 0;
|
|
for (i = 0; i < amd_nb_num(); i++) {
|
|
struct pci_dev *dev = node_to_amd_nb(i)->misc;
|
|
if (fix_northbridge(dev, pdev, cap_ptr) < 0) {
|
|
dev_err(&dev->dev, "no usable aperture found\n");
|
|
#ifdef __x86_64__
|
|
/* should port this to i386 */
|
|
dev_err(&dev->dev, "consider rebooting with iommu=memaper=2 to get a good aperture\n");
|
|
#endif
|
|
return -1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Handle AMD 8151 quirks */
|
|
static void amd8151_init(struct pci_dev *pdev, struct agp_bridge_data *bridge)
|
|
{
|
|
char *revstring;
|
|
|
|
switch (pdev->revision) {
|
|
case 0x01: revstring="A0"; break;
|
|
case 0x02: revstring="A1"; break;
|
|
case 0x11: revstring="B0"; break;
|
|
case 0x12: revstring="B1"; break;
|
|
case 0x13: revstring="B2"; break;
|
|
case 0x14: revstring="B3"; break;
|
|
default: revstring="??"; break;
|
|
}
|
|
|
|
dev_info(&pdev->dev, "AMD 8151 AGP Bridge rev %s\n", revstring);
|
|
|
|
/*
|
|
* Work around errata.
|
|
* Chips before B2 stepping incorrectly reporting v3.5
|
|
*/
|
|
if (pdev->revision < 0x13) {
|
|
dev_info(&pdev->dev, "correcting AGP revision (reports 3.5, is really 3.0)\n");
|
|
bridge->major_version = 3;
|
|
bridge->minor_version = 0;
|
|
}
|
|
}
|
|
|
|
|
|
static const struct aper_size_info_32 uli_sizes[7] =
|
|
{
|
|
{256, 65536, 6, 10},
|
|
{128, 32768, 5, 9},
|
|
{64, 16384, 4, 8},
|
|
{32, 8192, 3, 7},
|
|
{16, 4096, 2, 6},
|
|
{8, 2048, 1, 4},
|
|
{4, 1024, 0, 3}
|
|
};
|
|
static int uli_agp_init(struct pci_dev *pdev)
|
|
{
|
|
u32 httfea,baseaddr,enuscr;
|
|
struct pci_dev *dev1;
|
|
int i, ret;
|
|
unsigned size = amd64_fetch_size();
|
|
|
|
dev_info(&pdev->dev, "setting up ULi AGP\n");
|
|
dev1 = pci_get_slot (pdev->bus,PCI_DEVFN(0,0));
|
|
if (dev1 == NULL) {
|
|
dev_info(&pdev->dev, "can't find ULi secondary device\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(uli_sizes); i++)
|
|
if (uli_sizes[i].size == size)
|
|
break;
|
|
|
|
if (i == ARRAY_SIZE(uli_sizes)) {
|
|
dev_info(&pdev->dev, "no ULi size found for %d\n", size);
|
|
ret = -ENODEV;
|
|
goto put;
|
|
}
|
|
|
|
/* shadow x86-64 registers into ULi registers */
|
|
pci_read_config_dword (node_to_amd_nb(0)->misc, AMD64_GARTAPERTUREBASE,
|
|
&httfea);
|
|
|
|
/* if x86-64 aperture base is beyond 4G, exit here */
|
|
if ((httfea & 0x7fff) >> (32 - 25)) {
|
|
ret = -ENODEV;
|
|
goto put;
|
|
}
|
|
|
|
httfea = (httfea& 0x7fff) << 25;
|
|
|
|
pci_read_config_dword(pdev, ULI_X86_64_BASE_ADDR, &baseaddr);
|
|
baseaddr&= ~PCI_BASE_ADDRESS_MEM_MASK;
|
|
baseaddr|= httfea;
|
|
pci_write_config_dword(pdev, ULI_X86_64_BASE_ADDR, baseaddr);
|
|
|
|
enuscr= httfea+ (size * 1024 * 1024) - 1;
|
|
pci_write_config_dword(dev1, ULI_X86_64_HTT_FEA_REG, httfea);
|
|
pci_write_config_dword(dev1, ULI_X86_64_ENU_SCR_REG, enuscr);
|
|
ret = 0;
|
|
put:
|
|
pci_dev_put(dev1);
|
|
return ret;
|
|
}
|
|
|
|
|
|
static const struct aper_size_info_32 nforce3_sizes[5] =
|
|
{
|
|
{512, 131072, 7, 0x00000000 },
|
|
{256, 65536, 6, 0x00000008 },
|
|
{128, 32768, 5, 0x0000000C },
|
|
{64, 16384, 4, 0x0000000E },
|
|
{32, 8192, 3, 0x0000000F }
|
|
};
|
|
|
|
/* Handle shadow device of the Nvidia NForce3 */
|
|
/* CHECK-ME original 2.4 version set up some IORRs. Check if that is needed. */
|
|
static int nforce3_agp_init(struct pci_dev *pdev)
|
|
{
|
|
u32 tmp, apbase, apbar, aplimit;
|
|
struct pci_dev *dev1;
|
|
int i, ret;
|
|
unsigned size = amd64_fetch_size();
|
|
|
|
dev_info(&pdev->dev, "setting up Nforce3 AGP\n");
|
|
|
|
dev1 = pci_get_slot(pdev->bus, PCI_DEVFN(11, 0));
|
|
if (dev1 == NULL) {
|
|
dev_info(&pdev->dev, "can't find Nforce3 secondary device\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(nforce3_sizes); i++)
|
|
if (nforce3_sizes[i].size == size)
|
|
break;
|
|
|
|
if (i == ARRAY_SIZE(nforce3_sizes)) {
|
|
dev_info(&pdev->dev, "no NForce3 size found for %d\n", size);
|
|
ret = -ENODEV;
|
|
goto put;
|
|
}
|
|
|
|
pci_read_config_dword(dev1, NVIDIA_X86_64_1_APSIZE, &tmp);
|
|
tmp &= ~(0xf);
|
|
tmp |= nforce3_sizes[i].size_value;
|
|
pci_write_config_dword(dev1, NVIDIA_X86_64_1_APSIZE, tmp);
|
|
|
|
/* shadow x86-64 registers into NVIDIA registers */
|
|
pci_read_config_dword (node_to_amd_nb(0)->misc, AMD64_GARTAPERTUREBASE,
|
|
&apbase);
|
|
|
|
/* if x86-64 aperture base is beyond 4G, exit here */
|
|
if ( (apbase & 0x7fff) >> (32 - 25) ) {
|
|
dev_info(&pdev->dev, "aperture base > 4G\n");
|
|
ret = -ENODEV;
|
|
goto put;
|
|
}
|
|
|
|
apbase = (apbase & 0x7fff) << 25;
|
|
|
|
pci_read_config_dword(pdev, NVIDIA_X86_64_0_APBASE, &apbar);
|
|
apbar &= ~PCI_BASE_ADDRESS_MEM_MASK;
|
|
apbar |= apbase;
|
|
pci_write_config_dword(pdev, NVIDIA_X86_64_0_APBASE, apbar);
|
|
|
|
aplimit = apbase + (size * 1024 * 1024) - 1;
|
|
pci_write_config_dword(dev1, NVIDIA_X86_64_1_APBASE1, apbase);
|
|
pci_write_config_dword(dev1, NVIDIA_X86_64_1_APLIMIT1, aplimit);
|
|
pci_write_config_dword(dev1, NVIDIA_X86_64_1_APBASE2, apbase);
|
|
pci_write_config_dword(dev1, NVIDIA_X86_64_1_APLIMIT2, aplimit);
|
|
|
|
ret = 0;
|
|
put:
|
|
pci_dev_put(dev1);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int agp_amd64_probe(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct agp_bridge_data *bridge;
|
|
u8 cap_ptr;
|
|
int err;
|
|
|
|
/* The Highlander principle */
|
|
if (agp_bridges_found)
|
|
return -ENODEV;
|
|
|
|
cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP);
|
|
if (!cap_ptr)
|
|
return -ENODEV;
|
|
|
|
/* Could check for AGPv3 here */
|
|
|
|
bridge = agp_alloc_bridge();
|
|
if (!bridge)
|
|
return -ENOMEM;
|
|
|
|
if (pdev->vendor == PCI_VENDOR_ID_AMD &&
|
|
pdev->device == PCI_DEVICE_ID_AMD_8151_0) {
|
|
amd8151_init(pdev, bridge);
|
|
} else {
|
|
dev_info(&pdev->dev, "AGP bridge [%04x/%04x]\n",
|
|
pdev->vendor, pdev->device);
|
|
}
|
|
|
|
bridge->driver = &amd_8151_driver;
|
|
bridge->dev = pdev;
|
|
bridge->capndx = cap_ptr;
|
|
|
|
/* Fill in the mode register */
|
|
pci_read_config_dword(pdev, bridge->capndx+PCI_AGP_STATUS, &bridge->mode);
|
|
|
|
if (cache_nbs(pdev, cap_ptr) == -1) {
|
|
agp_put_bridge(bridge);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (pdev->vendor == PCI_VENDOR_ID_NVIDIA) {
|
|
int ret = nforce3_agp_init(pdev);
|
|
if (ret) {
|
|
agp_put_bridge(bridge);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (pdev->vendor == PCI_VENDOR_ID_AL) {
|
|
int ret = uli_agp_init(pdev);
|
|
if (ret) {
|
|
agp_put_bridge(bridge);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
pci_set_drvdata(pdev, bridge);
|
|
err = agp_add_bridge(bridge);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
agp_bridges_found++;
|
|
return 0;
|
|
}
|
|
|
|
static void agp_amd64_remove(struct pci_dev *pdev)
|
|
{
|
|
struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
|
|
|
|
release_mem_region(virt_to_phys(bridge->gatt_table_real),
|
|
amd64_aperture_sizes[bridge->aperture_size_idx].size);
|
|
agp_remove_bridge(bridge);
|
|
agp_put_bridge(bridge);
|
|
|
|
agp_bridges_found--;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int agp_amd64_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
pci_save_state(pdev);
|
|
pci_set_power_state(pdev, pci_choose_state(pdev, state));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int agp_amd64_resume(struct pci_dev *pdev)
|
|
{
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
pci_restore_state(pdev);
|
|
|
|
if (pdev->vendor == PCI_VENDOR_ID_NVIDIA)
|
|
nforce3_agp_init(pdev);
|
|
|
|
return amd_8151_configure();
|
|
}
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
static struct pci_device_id agp_amd64_pci_table[] = {
|
|
{
|
|
.class = (PCI_CLASS_BRIDGE_HOST << 8),
|
|
.class_mask = ~0,
|
|
.vendor = PCI_VENDOR_ID_AMD,
|
|
.device = PCI_DEVICE_ID_AMD_8151_0,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
},
|
|
/* ULi M1689 */
|
|
{
|
|
.class = (PCI_CLASS_BRIDGE_HOST << 8),
|
|
.class_mask = ~0,
|
|
.vendor = PCI_VENDOR_ID_AL,
|
|
.device = PCI_DEVICE_ID_AL_M1689,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
},
|
|
/* VIA K8T800Pro */
|
|
{
|
|
.class = (PCI_CLASS_BRIDGE_HOST << 8),
|
|
.class_mask = ~0,
|
|
.vendor = PCI_VENDOR_ID_VIA,
|
|
.device = PCI_DEVICE_ID_VIA_K8T800PRO_0,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
},
|
|
/* VIA K8T800 */
|
|
{
|
|
.class = (PCI_CLASS_BRIDGE_HOST << 8),
|
|
.class_mask = ~0,
|
|
.vendor = PCI_VENDOR_ID_VIA,
|
|
.device = PCI_DEVICE_ID_VIA_8385_0,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
},
|
|
/* VIA K8M800 / K8N800 */
|
|
{
|
|
.class = (PCI_CLASS_BRIDGE_HOST << 8),
|
|
.class_mask = ~0,
|
|
.vendor = PCI_VENDOR_ID_VIA,
|
|
.device = PCI_DEVICE_ID_VIA_8380_0,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
},
|
|
/* VIA K8M890 / K8N890 */
|
|
{
|
|
.class = (PCI_CLASS_BRIDGE_HOST << 8),
|
|
.class_mask = ~0,
|
|
.vendor = PCI_VENDOR_ID_VIA,
|
|
.device = PCI_DEVICE_ID_VIA_VT3336,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
},
|
|
/* VIA K8T890 */
|
|
{
|
|
.class = (PCI_CLASS_BRIDGE_HOST << 8),
|
|
.class_mask = ~0,
|
|
.vendor = PCI_VENDOR_ID_VIA,
|
|
.device = PCI_DEVICE_ID_VIA_3238_0,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
},
|
|
/* VIA K8T800/K8M800/K8N800 */
|
|
{
|
|
.class = (PCI_CLASS_BRIDGE_HOST << 8),
|
|
.class_mask = ~0,
|
|
.vendor = PCI_VENDOR_ID_VIA,
|
|
.device = PCI_DEVICE_ID_VIA_838X_1,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
},
|
|
/* NForce3 */
|
|
{
|
|
.class = (PCI_CLASS_BRIDGE_HOST << 8),
|
|
.class_mask = ~0,
|
|
.vendor = PCI_VENDOR_ID_NVIDIA,
|
|
.device = PCI_DEVICE_ID_NVIDIA_NFORCE3,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
},
|
|
{
|
|
.class = (PCI_CLASS_BRIDGE_HOST << 8),
|
|
.class_mask = ~0,
|
|
.vendor = PCI_VENDOR_ID_NVIDIA,
|
|
.device = PCI_DEVICE_ID_NVIDIA_NFORCE3S,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
},
|
|
/* SIS 755 */
|
|
{
|
|
.class = (PCI_CLASS_BRIDGE_HOST << 8),
|
|
.class_mask = ~0,
|
|
.vendor = PCI_VENDOR_ID_SI,
|
|
.device = PCI_DEVICE_ID_SI_755,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
},
|
|
/* SIS 760 */
|
|
{
|
|
.class = (PCI_CLASS_BRIDGE_HOST << 8),
|
|
.class_mask = ~0,
|
|
.vendor = PCI_VENDOR_ID_SI,
|
|
.device = PCI_DEVICE_ID_SI_760,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
},
|
|
/* ALI/ULI M1695 */
|
|
{
|
|
.class = (PCI_CLASS_BRIDGE_HOST << 8),
|
|
.class_mask = ~0,
|
|
.vendor = PCI_VENDOR_ID_AL,
|
|
.device = 0x1695,
|
|
.subvendor = PCI_ANY_ID,
|
|
.subdevice = PCI_ANY_ID,
|
|
},
|
|
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, agp_amd64_pci_table);
|
|
|
|
static const struct pci_device_id agp_amd64_pci_promisc_table[] = {
|
|
{ PCI_DEVICE_CLASS(0, 0) },
|
|
{ }
|
|
};
|
|
|
|
static struct pci_driver agp_amd64_pci_driver = {
|
|
.name = "agpgart-amd64",
|
|
.id_table = agp_amd64_pci_table,
|
|
.probe = agp_amd64_probe,
|
|
.remove = agp_amd64_remove,
|
|
#ifdef CONFIG_PM
|
|
.suspend = agp_amd64_suspend,
|
|
.resume = agp_amd64_resume,
|
|
#endif
|
|
};
|
|
|
|
|
|
/* Not static due to IOMMU code calling it early. */
|
|
int __init agp_amd64_init(void)
|
|
{
|
|
int err = 0;
|
|
|
|
if (agp_off)
|
|
return -EINVAL;
|
|
|
|
err = pci_register_driver(&agp_amd64_pci_driver);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
if (agp_bridges_found == 0) {
|
|
if (!agp_try_unsupported && !agp_try_unsupported_boot) {
|
|
printk(KERN_INFO PFX "No supported AGP bridge found.\n");
|
|
#ifdef MODULE
|
|
printk(KERN_INFO PFX "You can try agp_try_unsupported=1\n");
|
|
#else
|
|
printk(KERN_INFO PFX "You can boot with agp=try_unsupported\n");
|
|
#endif
|
|
pci_unregister_driver(&agp_amd64_pci_driver);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* First check that we have at least one AMD64 NB */
|
|
if (!pci_dev_present(amd_nb_misc_ids)) {
|
|
pci_unregister_driver(&agp_amd64_pci_driver);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Look for any AGP bridge */
|
|
agp_amd64_pci_driver.id_table = agp_amd64_pci_promisc_table;
|
|
err = driver_attach(&agp_amd64_pci_driver.driver);
|
|
if (err == 0 && agp_bridges_found == 0) {
|
|
pci_unregister_driver(&agp_amd64_pci_driver);
|
|
err = -ENODEV;
|
|
}
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static int __init agp_amd64_mod_init(void)
|
|
{
|
|
#ifndef MODULE
|
|
if (gart_iommu_aperture)
|
|
return agp_bridges_found ? 0 : -ENODEV;
|
|
#endif
|
|
return agp_amd64_init();
|
|
}
|
|
|
|
static void __exit agp_amd64_cleanup(void)
|
|
{
|
|
#ifndef MODULE
|
|
if (gart_iommu_aperture)
|
|
return;
|
|
#endif
|
|
if (aperture_resource)
|
|
release_resource(aperture_resource);
|
|
pci_unregister_driver(&agp_amd64_pci_driver);
|
|
}
|
|
|
|
module_init(agp_amd64_mod_init);
|
|
module_exit(agp_amd64_cleanup);
|
|
|
|
MODULE_AUTHOR("Dave Jones, Andi Kleen");
|
|
module_param(agp_try_unsupported, bool, 0);
|
|
MODULE_LICENSE("GPL");
|