WSL2-Linux-Kernel/arch/powerpc/kernel/setup-common.c

523 строки
12 KiB
C

/*
* Common boot and setup code for both 32-bit and 64-bit.
* Extracted from arch/powerpc/kernel/setup_64.c.
*
* Copyright (C) 2001 PPC64 Team, IBM Corp
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#undef DEBUG
#include <linux/module.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/initrd.h>
#include <linux/platform_device.h>
#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/ioport.h>
#include <linux/console.h>
#include <linux/utsname.h>
#include <linux/screen_info.h>
#include <linux/root_dev.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/unistd.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/processor.h>
#include <asm/vdso_datapage.h>
#include <asm/pgtable.h>
#include <asm/smp.h>
#include <asm/elf.h>
#include <asm/machdep.h>
#include <asm/time.h>
#include <asm/cputable.h>
#include <asm/sections.h>
#include <asm/firmware.h>
#include <asm/btext.h>
#include <asm/nvram.h>
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/rtas.h>
#include <asm/iommu.h>
#include <asm/serial.h>
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/lmb.h>
#include <asm/xmon.h>
#include "setup.h"
#ifdef DEBUG
#include <asm/udbg.h>
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif
/* The main machine-dep calls structure
*/
struct machdep_calls ppc_md;
EXPORT_SYMBOL(ppc_md);
struct machdep_calls *machine_id;
EXPORT_SYMBOL(machine_id);
unsigned long klimit = (unsigned long) _end;
/*
* This still seems to be needed... -- paulus
*/
struct screen_info screen_info = {
.orig_x = 0,
.orig_y = 25,
.orig_video_cols = 80,
.orig_video_lines = 25,
.orig_video_isVGA = 1,
.orig_video_points = 16
};
#ifdef __DO_IRQ_CANON
/* XXX should go elsewhere eventually */
int ppc_do_canonicalize_irqs;
EXPORT_SYMBOL(ppc_do_canonicalize_irqs);
#endif
/* also used by kexec */
void machine_shutdown(void)
{
if (ppc_md.machine_shutdown)
ppc_md.machine_shutdown();
}
void machine_restart(char *cmd)
{
machine_shutdown();
if (ppc_md.restart)
ppc_md.restart(cmd);
#ifdef CONFIG_SMP
smp_send_stop();
#endif
printk(KERN_EMERG "System Halted, OK to turn off power\n");
local_irq_disable();
while (1) ;
}
void machine_power_off(void)
{
machine_shutdown();
if (ppc_md.power_off)
ppc_md.power_off();
#ifdef CONFIG_SMP
smp_send_stop();
#endif
printk(KERN_EMERG "System Halted, OK to turn off power\n");
local_irq_disable();
while (1) ;
}
/* Used by the G5 thermal driver */
EXPORT_SYMBOL_GPL(machine_power_off);
void (*pm_power_off)(void) = machine_power_off;
EXPORT_SYMBOL_GPL(pm_power_off);
void machine_halt(void)
{
machine_shutdown();
if (ppc_md.halt)
ppc_md.halt();
#ifdef CONFIG_SMP
smp_send_stop();
#endif
printk(KERN_EMERG "System Halted, OK to turn off power\n");
local_irq_disable();
while (1) ;
}
#ifdef CONFIG_TAU
extern u32 cpu_temp(unsigned long cpu);
extern u32 cpu_temp_both(unsigned long cpu);
#endif /* CONFIG_TAU */
#ifdef CONFIG_SMP
DEFINE_PER_CPU(unsigned int, pvr);
#endif
static int show_cpuinfo(struct seq_file *m, void *v)
{
unsigned long cpu_id = (unsigned long)v - 1;
unsigned int pvr;
unsigned short maj;
unsigned short min;
if (cpu_id == NR_CPUS) {
#if defined(CONFIG_SMP) && defined(CONFIG_PPC32)
unsigned long bogosum = 0;
int i;
for_each_online_cpu(i)
bogosum += loops_per_jiffy;
seq_printf(m, "total bogomips\t: %lu.%02lu\n",
bogosum/(500000/HZ), bogosum/(5000/HZ) % 100);
#endif /* CONFIG_SMP && CONFIG_PPC32 */
seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
if (ppc_md.name)
seq_printf(m, "platform\t: %s\n", ppc_md.name);
if (ppc_md.show_cpuinfo != NULL)
ppc_md.show_cpuinfo(m);
return 0;
}
/* We only show online cpus: disable preempt (overzealous, I
* knew) to prevent cpu going down. */
preempt_disable();
if (!cpu_online(cpu_id)) {
preempt_enable();
return 0;
}
#ifdef CONFIG_SMP
pvr = per_cpu(pvr, cpu_id);
#else
pvr = mfspr(SPRN_PVR);
#endif
maj = (pvr >> 8) & 0xFF;
min = pvr & 0xFF;
seq_printf(m, "processor\t: %lu\n", cpu_id);
seq_printf(m, "cpu\t\t: ");
if (cur_cpu_spec->pvr_mask)
seq_printf(m, "%s", cur_cpu_spec->cpu_name);
else
seq_printf(m, "unknown (%08x)", pvr);
#ifdef CONFIG_ALTIVEC
if (cpu_has_feature(CPU_FTR_ALTIVEC))
seq_printf(m, ", altivec supported");
#endif /* CONFIG_ALTIVEC */
seq_printf(m, "\n");
#ifdef CONFIG_TAU
if (cur_cpu_spec->cpu_features & CPU_FTR_TAU) {
#ifdef CONFIG_TAU_AVERAGE
/* more straightforward, but potentially misleading */
seq_printf(m, "temperature \t: %u C (uncalibrated)\n",
cpu_temp(cpu_id));
#else
/* show the actual temp sensor range */
u32 temp;
temp = cpu_temp_both(cpu_id);
seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n",
temp & 0xff, temp >> 16);
#endif
}
#endif /* CONFIG_TAU */
/*
* Assume here that all clock rates are the same in a
* smp system. -- Cort
*/
if (ppc_proc_freq)
seq_printf(m, "clock\t\t: %lu.%06luMHz\n",
ppc_proc_freq / 1000000, ppc_proc_freq % 1000000);
if (ppc_md.show_percpuinfo != NULL)
ppc_md.show_percpuinfo(m, cpu_id);
/* If we are a Freescale core do a simple check so
* we dont have to keep adding cases in the future */
if (PVR_VER(pvr) & 0x8000) {
maj = PVR_MAJ(pvr);
min = PVR_MIN(pvr);
} else {
switch (PVR_VER(pvr)) {
case 0x0020: /* 403 family */
maj = PVR_MAJ(pvr) + 1;
min = PVR_MIN(pvr);
break;
case 0x1008: /* 740P/750P ?? */
maj = ((pvr >> 8) & 0xFF) - 1;
min = pvr & 0xFF;
break;
default:
maj = (pvr >> 8) & 0xFF;
min = pvr & 0xFF;
break;
}
}
seq_printf(m, "revision\t: %hd.%hd (pvr %04x %04x)\n",
maj, min, PVR_VER(pvr), PVR_REV(pvr));
#ifdef CONFIG_PPC32
seq_printf(m, "bogomips\t: %lu.%02lu\n",
loops_per_jiffy / (500000/HZ),
(loops_per_jiffy / (5000/HZ)) % 100);
#endif
#ifdef CONFIG_SMP
seq_printf(m, "\n");
#endif
preempt_enable();
return 0;
}
static void *c_start(struct seq_file *m, loff_t *pos)
{
unsigned long i = *pos;
return i <= NR_CPUS ? (void *)(i + 1) : NULL;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
++*pos;
return c_start(m, pos);
}
static void c_stop(struct seq_file *m, void *v)
{
}
struct seq_operations cpuinfo_op = {
.start =c_start,
.next = c_next,
.stop = c_stop,
.show = show_cpuinfo,
};
void __init check_for_initrd(void)
{
#ifdef CONFIG_BLK_DEV_INITRD
const unsigned int *prop;
int len;
DBG(" -> check_for_initrd()\n");
if (of_chosen) {
prop = get_property(of_chosen, "linux,initrd-start", &len);
if (prop != NULL) {
initrd_start = (unsigned long)
__va(of_read_ulong(prop, len / 4));
prop = get_property(of_chosen,
"linux,initrd-end", &len);
if (prop != NULL) {
initrd_end = (unsigned long)
__va(of_read_ulong(prop, len / 4));
initrd_below_start_ok = 1;
} else
initrd_start = 0;
}
}
/* If we were passed an initrd, set the ROOT_DEV properly if the values
* look sensible. If not, clear initrd reference.
*/
if (is_kernel_addr(initrd_start) && is_kernel_addr(initrd_end) &&
initrd_end > initrd_start)
ROOT_DEV = Root_RAM0;
else
initrd_start = initrd_end = 0;
if (initrd_start)
printk("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end);
DBG(" <- check_for_initrd()\n");
#endif /* CONFIG_BLK_DEV_INITRD */
}
#ifdef CONFIG_SMP
/**
* setup_cpu_maps - initialize the following cpu maps:
* cpu_possible_map
* cpu_present_map
* cpu_sibling_map
*
* Having the possible map set up early allows us to restrict allocations
* of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
*
* We do not initialize the online map here; cpus set their own bits in
* cpu_online_map as they come up.
*
* This function is valid only for Open Firmware systems. finish_device_tree
* must be called before using this.
*
* While we're here, we may as well set the "physical" cpu ids in the paca.
*
* NOTE: This must match the parsing done in early_init_dt_scan_cpus.
*/
void __init smp_setup_cpu_maps(void)
{
struct device_node *dn = NULL;
int cpu = 0;
while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) {
const int *intserv;
int j, len = sizeof(u32), nthreads = 1;
intserv = get_property(dn, "ibm,ppc-interrupt-server#s", &len);
if (intserv)
nthreads = len / sizeof(int);
else {
intserv = get_property(dn, "reg", NULL);
if (!intserv)
intserv = &cpu; /* assume logical == phys */
}
for (j = 0; j < nthreads && cpu < NR_CPUS; j++) {
cpu_set(cpu, cpu_present_map);
set_hard_smp_processor_id(cpu, intserv[j]);
cpu_set(cpu, cpu_possible_map);
cpu++;
}
}
#ifdef CONFIG_PPC64
/*
* On pSeries LPAR, we need to know how many cpus
* could possibly be added to this partition.
*/
if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR) &&
(dn = of_find_node_by_path("/rtas"))) {
int num_addr_cell, num_size_cell, maxcpus;
const unsigned int *ireg;
num_addr_cell = prom_n_addr_cells(dn);
num_size_cell = prom_n_size_cells(dn);
ireg = get_property(dn, "ibm,lrdr-capacity", NULL);
if (!ireg)
goto out;
maxcpus = ireg[num_addr_cell + num_size_cell];
/* Double maxcpus for processors which have SMT capability */
if (cpu_has_feature(CPU_FTR_SMT))
maxcpus *= 2;
if (maxcpus > NR_CPUS) {
printk(KERN_WARNING
"Partition configured for %d cpus, "
"operating system maximum is %d.\n",
maxcpus, NR_CPUS);
maxcpus = NR_CPUS;
} else
printk(KERN_INFO "Partition configured for %d cpus.\n",
maxcpus);
for (cpu = 0; cpu < maxcpus; cpu++)
cpu_set(cpu, cpu_possible_map);
out:
of_node_put(dn);
}
/*
* Do the sibling map; assume only two threads per processor.
*/
for_each_possible_cpu(cpu) {
cpu_set(cpu, cpu_sibling_map[cpu]);
if (cpu_has_feature(CPU_FTR_SMT))
cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]);
}
vdso_data->processorCount = num_present_cpus();
#endif /* CONFIG_PPC64 */
}
#endif /* CONFIG_SMP */
static __init int add_pcspkr(void)
{
struct device_node *np;
struct platform_device *pd;
int ret;
np = of_find_compatible_node(NULL, NULL, "pnpPNP,100");
of_node_put(np);
if (!np)
return -ENODEV;
pd = platform_device_alloc("pcspkr", -1);
if (!pd)
return -ENOMEM;
ret = platform_device_add(pd);
if (ret)
platform_device_put(pd);
return ret;
}
device_initcall(add_pcspkr);
void probe_machine(void)
{
extern struct machdep_calls __machine_desc_start;
extern struct machdep_calls __machine_desc_end;
/*
* Iterate all ppc_md structures until we find the proper
* one for the current machine type
*/
DBG("Probing machine type ...\n");
for (machine_id = &__machine_desc_start;
machine_id < &__machine_desc_end;
machine_id++) {
DBG(" %s ...", machine_id->name);
memcpy(&ppc_md, machine_id, sizeof(struct machdep_calls));
if (ppc_md.probe()) {
DBG(" match !\n");
break;
}
DBG("\n");
}
/* What can we do if we didn't find ? */
if (machine_id >= &__machine_desc_end) {
DBG("No suitable machine found !\n");
for (;;);
}
printk(KERN_INFO "Using %s machine description\n", ppc_md.name);
}
int check_legacy_ioport(unsigned long base_port)
{
if (ppc_md.check_legacy_ioport == NULL)
return 0;
return ppc_md.check_legacy_ioport(base_port);
}
EXPORT_SYMBOL(check_legacy_ioport);
static int ppc_panic_event(struct notifier_block *this,
unsigned long event, void *ptr)
{
ppc_md.panic(ptr); /* May not return */
return NOTIFY_DONE;
}
static struct notifier_block ppc_panic_block = {
.notifier_call = ppc_panic_event,
.priority = INT_MIN /* may not return; must be done last */
};
void __init setup_panic(void)
{
atomic_notifier_chain_register(&panic_notifier_list, &ppc_panic_block);
}