177 строки
6.6 KiB
Plaintext
177 строки
6.6 KiB
Plaintext
Renesas R-Car Gen3 Digital Radio Interface controller (DRIF)
|
|
------------------------------------------------------------
|
|
|
|
R-Car Gen3 DRIF is a SPI like receive only slave device. A general
|
|
representation of DRIF interfacing with a master device is shown below.
|
|
|
|
+---------------------+ +---------------------+
|
|
| |-----SCK------->|CLK |
|
|
| Master |-----SS-------->|SYNC DRIFn (slave) |
|
|
| |-----SD0------->|D0 |
|
|
| |-----SD1------->|D1 |
|
|
+---------------------+ +---------------------+
|
|
|
|
As per datasheet, each DRIF channel (drifn) is made up of two internal
|
|
channels (drifn0 & drifn1). These two internal channels share the common
|
|
CLK & SYNC. Each internal channel has its own dedicated resources like
|
|
irq, dma channels, address space & clock. This internal split is not
|
|
visible to the external master device.
|
|
|
|
The device tree model represents each internal channel as a separate node.
|
|
The internal channels sharing the CLK & SYNC are tied together by their
|
|
phandles using a property called "renesas,bonding". For the rest of
|
|
the documentation, unless explicitly stated, the word channel implies an
|
|
internal channel.
|
|
|
|
When both internal channels are enabled they need to be managed together
|
|
as one (i.e.) they cannot operate alone as independent devices. Out of the
|
|
two, one of them needs to act as a primary device that accepts common
|
|
properties of both the internal channels. This channel is identified by a
|
|
property called "renesas,primary-bond".
|
|
|
|
To summarize,
|
|
- When both the internal channels that are bonded together are enabled,
|
|
the zeroth channel is selected as primary-bond. This channels accepts
|
|
properties common to all the members of the bond.
|
|
- When only one of the bonded channels need to be enabled, the property
|
|
"renesas,bonding" or "renesas,primary-bond" will have no effect. That
|
|
enabled channel can act alone as any other independent device.
|
|
|
|
Required properties of an internal channel:
|
|
-------------------------------------------
|
|
- compatible: "renesas,r8a7795-drif" if DRIF controller is a part of R8A7795 SoC.
|
|
"renesas,rcar-gen3-drif" for a generic R-Car Gen3 compatible device.
|
|
|
|
When compatible with the generic version, nodes must list the
|
|
SoC-specific version corresponding to the platform first
|
|
followed by the generic version.
|
|
|
|
- reg: offset and length of that channel.
|
|
- interrupts: associated with that channel.
|
|
- clocks: phandle and clock specifier of that channel.
|
|
- clock-names: clock input name string: "fck".
|
|
- dmas: phandles to the DMA channels.
|
|
- dma-names: names of the DMA channel: "rx".
|
|
- renesas,bonding: phandle to the other channel.
|
|
|
|
Optional properties of an internal channel:
|
|
-------------------------------------------
|
|
- power-domains: phandle to the respective power domain.
|
|
|
|
Required properties of an internal channel when:
|
|
- It is the only enabled channel of the bond (or)
|
|
- If it acts as primary among enabled bonds
|
|
--------------------------------------------------------
|
|
- pinctrl-0: pin control group to be used for this channel.
|
|
- pinctrl-names: must be "default".
|
|
- renesas,primary-bond: empty property indicating the channel acts as primary
|
|
among the bonded channels.
|
|
- port: child port node corresponding to the data input, in accordance with
|
|
the video interface bindings defined in
|
|
Documentation/devicetree/bindings/media/video-interfaces.txt. The port
|
|
node must contain at least one endpoint.
|
|
|
|
Optional endpoint property:
|
|
---------------------------
|
|
- sync-active: Indicates sync signal polarity, 0/1 for low/high respectively.
|
|
This property maps to SYNCAC bit in the hardware manual. The
|
|
default is 1 (active high).
|
|
|
|
Example:
|
|
--------
|
|
|
|
(1) Both internal channels enabled:
|
|
-----------------------------------
|
|
|
|
When interfacing with a third party tuner device with two data pins as shown
|
|
below.
|
|
|
|
+---------------------+ +---------------------+
|
|
| |-----SCK------->|CLK |
|
|
| Master |-----SS-------->|SYNC DRIFn (slave) |
|
|
| |-----SD0------->|D0 |
|
|
| |-----SD1------->|D1 |
|
|
+---------------------+ +---------------------+
|
|
|
|
drif00: rif@e6f40000 {
|
|
compatible = "renesas,r8a7795-drif",
|
|
"renesas,rcar-gen3-drif";
|
|
reg = <0 0xe6f40000 0 0x64>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 515>;
|
|
clock-names = "fck";
|
|
dmas = <&dmac1 0x20>, <&dmac2 0x20>;
|
|
dma-names = "rx", "rx";
|
|
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
|
renesas,bonding = <&drif01>;
|
|
renesas,primary-bond;
|
|
pinctrl-0 = <&drif0_pins>;
|
|
pinctrl-names = "default";
|
|
port {
|
|
drif0_ep: endpoint {
|
|
remote-endpoint = <&tuner_ep>;
|
|
};
|
|
};
|
|
};
|
|
|
|
drif01: rif@e6f50000 {
|
|
compatible = "renesas,r8a7795-drif",
|
|
"renesas,rcar-gen3-drif";
|
|
reg = <0 0xe6f50000 0 0x64>;
|
|
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 514>;
|
|
clock-names = "fck";
|
|
dmas = <&dmac1 0x22>, <&dmac2 0x22>;
|
|
dma-names = "rx", "rx";
|
|
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
|
renesas,bonding = <&drif00>;
|
|
};
|
|
|
|
|
|
(2) Internal channel 1 alone is enabled:
|
|
----------------------------------------
|
|
|
|
When interfacing with a third party tuner device with one data pin as shown
|
|
below.
|
|
|
|
+---------------------+ +---------------------+
|
|
| |-----SCK------->|CLK |
|
|
| Master |-----SS-------->|SYNC DRIFn (slave) |
|
|
| | |D0 (unused) |
|
|
| |-----SD-------->|D1 |
|
|
+---------------------+ +---------------------+
|
|
|
|
drif00: rif@e6f40000 {
|
|
compatible = "renesas,r8a7795-drif",
|
|
"renesas,rcar-gen3-drif";
|
|
reg = <0 0xe6f40000 0 0x64>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 515>;
|
|
clock-names = "fck";
|
|
dmas = <&dmac1 0x20>, <&dmac2 0x20>;
|
|
dma-names = "rx", "rx";
|
|
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
|
renesas,bonding = <&drif01>;
|
|
};
|
|
|
|
drif01: rif@e6f50000 {
|
|
compatible = "renesas,r8a7795-drif",
|
|
"renesas,rcar-gen3-drif";
|
|
reg = <0 0xe6f50000 0 0x64>;
|
|
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cpg CPG_MOD 514>;
|
|
clock-names = "fck";
|
|
dmas = <&dmac1 0x22>, <&dmac2 0x22>;
|
|
dma-names = "rx", "rx";
|
|
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
|
|
renesas,bonding = <&drif00>;
|
|
pinctrl-0 = <&drif0_pins>;
|
|
pinctrl-names = "default";
|
|
port {
|
|
drif0_ep: endpoint {
|
|
remote-endpoint = <&tuner_ep>;
|
|
sync-active = <0>;
|
|
};
|
|
};
|
|
};
|