WSL2-Linux-Kernel/arch/arm/mach-s3c24xx/include/mach/map.h

158 строки
4.0 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2003 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - Memory map definitions
*/
#ifndef __ASM_ARCH_MAP_H
#define __ASM_ARCH_MAP_H
#include <plat/map-base.h>
#include <plat/map-s3c.h>
/*
* interrupt controller is the first thing we put in, to make
* the assembly code for the irq detection easier
*/
#define S3C2410_PA_IRQ (0x4A000000)
#define S3C24XX_SZ_IRQ SZ_1M
/* memory controller registers */
#define S3C2410_PA_MEMCTRL (0x48000000)
#define S3C24XX_SZ_MEMCTRL SZ_1M
/* Timers */
#define S3C2410_PA_TIMER (0x51000000)
#define S3C24XX_SZ_TIMER SZ_1M
/* Clock and Power management */
#define S3C24XX_SZ_CLKPWR SZ_1M
/* USB Device port */
#define S3C2410_PA_USBDEV (0x52000000)
#define S3C24XX_SZ_USBDEV SZ_1M
/* Watchdog */
#define S3C2410_PA_WATCHDOG (0x53000000)
#define S3C24XX_SZ_WATCHDOG SZ_1M
/* Standard size definitions for peripheral blocks. */
#define S3C24XX_SZ_UART SZ_1M
#define S3C24XX_SZ_IIS SZ_1M
#define S3C24XX_SZ_ADC SZ_1M
#define S3C24XX_SZ_SPI SZ_1M
#define S3C24XX_SZ_SDI SZ_1M
#define S3C24XX_SZ_NAND SZ_1M
#define S3C24XX_SZ_GPIO SZ_1M
/* USB host controller */
#define S3C2410_PA_USBHOST (0x49000000)
/* S3C2416/S3C2443/S3C2450 High-Speed USB Gadget */
#define S3C2416_PA_HSUDC (0x49800000)
#define S3C2416_SZ_HSUDC (SZ_4K)
/* DMA controller */
#define S3C2410_PA_DMA (0x4B000000)
#define S3C24XX_SZ_DMA SZ_1M
/* Clock and Power management */
#define S3C2410_PA_CLKPWR (0x4C000000)
/* LCD controller */
#define S3C2410_PA_LCD (0x4D000000)
#define S3C24XX_SZ_LCD SZ_1M
/* NAND flash controller */
#define S3C2410_PA_NAND (0x4E000000)
/* IIC hardware controller */
#define S3C2410_PA_IIC (0x54000000)
/* IIS controller */
#define S3C2410_PA_IIS (0x55000000)
/* RTC */
#define S3C2410_PA_RTC (0x57000000)
#define S3C24XX_SZ_RTC SZ_1M
/* ADC */
#define S3C2410_PA_ADC (0x58000000)
/* SPI */
#define S3C2410_PA_SPI (0x59000000)
#define S3C2443_PA_SPI0 (0x52000000)
#define S3C2443_PA_SPI1 S3C2410_PA_SPI
/* SDI */
#define S3C2410_PA_SDI (0x5A000000)
/* CAMIF */
#define S3C2440_PA_CAMIF (0x4F000000)
#define S3C2440_SZ_CAMIF SZ_1M
/* AC97 */
#define S3C2440_PA_AC97 (0x5B000000)
#define S3C2440_SZ_AC97 SZ_1M
/* S3C2443/S3C2416 High-speed SD/MMC */
#define S3C2443_PA_HSMMC (0x4A800000)
#define S3C2416_PA_HSMMC0 (0x4AC00000)
#define S3C2443_PA_FB (0x4C800000)
/* S3C2412 memory and IO controls */
#define S3C2412_PA_SSMC (0x4F000000)
#define S3C2412_PA_EBI (0x48800000)
/* physical addresses of all the chip-select areas */
#define S3C2410_CS0 (0x00000000)
#define S3C2410_CS1 (0x08000000)
#define S3C2410_CS2 (0x10000000)
#define S3C2410_CS3 (0x18000000)
#define S3C2410_CS4 (0x20000000)
#define S3C2410_CS5 (0x28000000)
#define S3C2410_CS6 (0x30000000)
#define S3C2410_CS7 (0x38000000)
#define S3C2410_SDRAM_PA (S3C2410_CS6)
/* Use a single interface for common resources between S3C24XX cpus */
#define S3C24XX_PA_IRQ S3C2410_PA_IRQ
#define S3C24XX_PA_MEMCTRL S3C2410_PA_MEMCTRL
#define S3C24XX_PA_DMA S3C2410_PA_DMA
#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR
#define S3C24XX_PA_LCD S3C2410_PA_LCD
#define S3C24XX_PA_TIMER S3C2410_PA_TIMER
#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV
#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
#define S3C24XX_PA_IIS S3C2410_PA_IIS
#define S3C24XX_PA_RTC S3C2410_PA_RTC
#define S3C24XX_PA_ADC S3C2410_PA_ADC
#define S3C24XX_PA_SPI S3C2410_PA_SPI
#define S3C24XX_PA_SPI1 (S3C2410_PA_SPI + S3C2410_SPI1)
#define S3C24XX_PA_SDI S3C2410_PA_SDI
#define S3C24XX_PA_NAND S3C2410_PA_NAND
#define S3C_PA_FB S3C2443_PA_FB
#define S3C_PA_IIC S3C2410_PA_IIC
#define S3C_PA_USBHOST S3C2410_PA_USBHOST
#define S3C_PA_HSMMC0 S3C2416_PA_HSMMC0
#define S3C_PA_HSMMC1 S3C2443_PA_HSMMC
#define S3C_PA_WDT S3C2410_PA_WATCHDOG
#define S3C_PA_NAND S3C24XX_PA_NAND
#define S3C_PA_SPI0 S3C2443_PA_SPI0
#define S3C_PA_SPI1 S3C2443_PA_SPI1
#define SAMSUNG_PA_TIMER S3C2410_PA_TIMER
#endif /* __ASM_ARCH_MAP_H */