1685 строки
44 KiB
C
1685 строки
44 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* SPI bus driver for the Topcliff PCH used by Intel SoCs
|
|
*
|
|
* Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/spi/spidev.h>
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/pch_dma.h>
|
|
|
|
/* Register offsets */
|
|
#define PCH_SPCR 0x00 /* SPI control register */
|
|
#define PCH_SPBRR 0x04 /* SPI baud rate register */
|
|
#define PCH_SPSR 0x08 /* SPI status register */
|
|
#define PCH_SPDWR 0x0C /* SPI write data register */
|
|
#define PCH_SPDRR 0x10 /* SPI read data register */
|
|
#define PCH_SSNXCR 0x18 /* SSN Expand Control Register */
|
|
#define PCH_SRST 0x1C /* SPI reset register */
|
|
#define PCH_ADDRESS_SIZE 0x20
|
|
|
|
#define PCH_SPSR_TFD 0x000007C0
|
|
#define PCH_SPSR_RFD 0x0000F800
|
|
|
|
#define PCH_READABLE(x) (((x) & PCH_SPSR_RFD)>>11)
|
|
#define PCH_WRITABLE(x) (((x) & PCH_SPSR_TFD)>>6)
|
|
|
|
#define PCH_RX_THOLD 7
|
|
#define PCH_RX_THOLD_MAX 15
|
|
|
|
#define PCH_TX_THOLD 2
|
|
|
|
#define PCH_MAX_BAUDRATE 5000000
|
|
#define PCH_MAX_FIFO_DEPTH 16
|
|
|
|
#define STATUS_RUNNING 1
|
|
#define STATUS_EXITING 2
|
|
#define PCH_SLEEP_TIME 10
|
|
|
|
#define SSN_LOW 0x02U
|
|
#define SSN_HIGH 0x03U
|
|
#define SSN_NO_CONTROL 0x00U
|
|
#define PCH_MAX_CS 0xFF
|
|
#define PCI_DEVICE_ID_GE_SPI 0x8816
|
|
|
|
#define SPCR_SPE_BIT (1 << 0)
|
|
#define SPCR_MSTR_BIT (1 << 1)
|
|
#define SPCR_LSBF_BIT (1 << 4)
|
|
#define SPCR_CPHA_BIT (1 << 5)
|
|
#define SPCR_CPOL_BIT (1 << 6)
|
|
#define SPCR_TFIE_BIT (1 << 8)
|
|
#define SPCR_RFIE_BIT (1 << 9)
|
|
#define SPCR_FIE_BIT (1 << 10)
|
|
#define SPCR_ORIE_BIT (1 << 11)
|
|
#define SPCR_MDFIE_BIT (1 << 12)
|
|
#define SPCR_FICLR_BIT (1 << 24)
|
|
#define SPSR_TFI_BIT (1 << 0)
|
|
#define SPSR_RFI_BIT (1 << 1)
|
|
#define SPSR_FI_BIT (1 << 2)
|
|
#define SPSR_ORF_BIT (1 << 3)
|
|
#define SPBRR_SIZE_BIT (1 << 10)
|
|
|
|
#define PCH_ALL (SPCR_TFIE_BIT|SPCR_RFIE_BIT|SPCR_FIE_BIT|\
|
|
SPCR_ORIE_BIT|SPCR_MDFIE_BIT)
|
|
|
|
#define SPCR_RFIC_FIELD 20
|
|
#define SPCR_TFIC_FIELD 16
|
|
|
|
#define MASK_SPBRR_SPBR_BITS ((1 << 10) - 1)
|
|
#define MASK_RFIC_SPCR_BITS (0xf << SPCR_RFIC_FIELD)
|
|
#define MASK_TFIC_SPCR_BITS (0xf << SPCR_TFIC_FIELD)
|
|
|
|
#define PCH_CLOCK_HZ 50000000
|
|
#define PCH_MAX_SPBR 1023
|
|
|
|
/* Definition for ML7213/ML7223/ML7831 by LAPIS Semiconductor */
|
|
#define PCI_DEVICE_ID_ML7213_SPI 0x802c
|
|
#define PCI_DEVICE_ID_ML7223_SPI 0x800F
|
|
#define PCI_DEVICE_ID_ML7831_SPI 0x8816
|
|
|
|
/*
|
|
* Set the number of SPI instance max
|
|
* Intel EG20T PCH : 1ch
|
|
* LAPIS Semiconductor ML7213 IOH : 2ch
|
|
* LAPIS Semiconductor ML7223 IOH : 1ch
|
|
* LAPIS Semiconductor ML7831 IOH : 1ch
|
|
*/
|
|
#define PCH_SPI_MAX_DEV 2
|
|
|
|
#define PCH_BUF_SIZE 4096
|
|
#define PCH_DMA_TRANS_SIZE 12
|
|
|
|
static int use_dma = 1;
|
|
|
|
struct pch_spi_dma_ctrl {
|
|
struct pci_dev *dma_dev;
|
|
struct dma_async_tx_descriptor *desc_tx;
|
|
struct dma_async_tx_descriptor *desc_rx;
|
|
struct pch_dma_slave param_tx;
|
|
struct pch_dma_slave param_rx;
|
|
struct dma_chan *chan_tx;
|
|
struct dma_chan *chan_rx;
|
|
struct scatterlist *sg_tx_p;
|
|
struct scatterlist *sg_rx_p;
|
|
struct scatterlist sg_tx;
|
|
struct scatterlist sg_rx;
|
|
int nent;
|
|
void *tx_buf_virt;
|
|
void *rx_buf_virt;
|
|
dma_addr_t tx_buf_dma;
|
|
dma_addr_t rx_buf_dma;
|
|
};
|
|
/**
|
|
* struct pch_spi_data - Holds the SPI channel specific details
|
|
* @io_remap_addr: The remapped PCI base address
|
|
* @io_base_addr: Base address
|
|
* @master: Pointer to the SPI master structure
|
|
* @work: Reference to work queue handler
|
|
* @wait: Wait queue for waking up upon receiving an
|
|
* interrupt.
|
|
* @transfer_complete: Status of SPI Transfer
|
|
* @bcurrent_msg_processing: Status flag for message processing
|
|
* @lock: Lock for protecting this structure
|
|
* @queue: SPI Message queue
|
|
* @status: Status of the SPI driver
|
|
* @bpw_len: Length of data to be transferred in bits per
|
|
* word
|
|
* @transfer_active: Flag showing active transfer
|
|
* @tx_index: Transmit data count; for bookkeeping during
|
|
* transfer
|
|
* @rx_index: Receive data count; for bookkeeping during
|
|
* transfer
|
|
* @pkt_tx_buff: Buffer for data to be transmitted
|
|
* @pkt_rx_buff: Buffer for received data
|
|
* @n_curnt_chip: The chip number that this SPI driver currently
|
|
* operates on
|
|
* @current_chip: Reference to the current chip that this SPI
|
|
* driver currently operates on
|
|
* @current_msg: The current message that this SPI driver is
|
|
* handling
|
|
* @cur_trans: The current transfer that this SPI driver is
|
|
* handling
|
|
* @board_dat: Reference to the SPI device data structure
|
|
* @plat_dev: platform_device structure
|
|
* @ch: SPI channel number
|
|
* @dma: Local DMA information
|
|
* @use_dma: True if DMA is to be used
|
|
* @irq_reg_sts: Status of IRQ registration
|
|
* @save_total_len: Save length while data is being transferred
|
|
*/
|
|
struct pch_spi_data {
|
|
void __iomem *io_remap_addr;
|
|
unsigned long io_base_addr;
|
|
struct spi_master *master;
|
|
struct work_struct work;
|
|
wait_queue_head_t wait;
|
|
u8 transfer_complete;
|
|
u8 bcurrent_msg_processing;
|
|
spinlock_t lock;
|
|
struct list_head queue;
|
|
u8 status;
|
|
u32 bpw_len;
|
|
u8 transfer_active;
|
|
u32 tx_index;
|
|
u32 rx_index;
|
|
u16 *pkt_tx_buff;
|
|
u16 *pkt_rx_buff;
|
|
u8 n_curnt_chip;
|
|
struct spi_device *current_chip;
|
|
struct spi_message *current_msg;
|
|
struct spi_transfer *cur_trans;
|
|
struct pch_spi_board_data *board_dat;
|
|
struct platform_device *plat_dev;
|
|
int ch;
|
|
struct pch_spi_dma_ctrl dma;
|
|
int use_dma;
|
|
u8 irq_reg_sts;
|
|
int save_total_len;
|
|
};
|
|
|
|
/**
|
|
* struct pch_spi_board_data - Holds the SPI device specific details
|
|
* @pdev: Pointer to the PCI device
|
|
* @suspend_sts: Status of suspend
|
|
* @num: The number of SPI device instance
|
|
*/
|
|
struct pch_spi_board_data {
|
|
struct pci_dev *pdev;
|
|
u8 suspend_sts;
|
|
int num;
|
|
};
|
|
|
|
struct pch_pd_dev_save {
|
|
int num;
|
|
struct platform_device *pd_save[PCH_SPI_MAX_DEV];
|
|
struct pch_spi_board_data *board_dat;
|
|
};
|
|
|
|
static const struct pci_device_id pch_spi_pcidev_id[] = {
|
|
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_GE_SPI), 1, },
|
|
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_SPI), 2, },
|
|
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_SPI), 1, },
|
|
{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7831_SPI), 1, },
|
|
{ }
|
|
};
|
|
|
|
/**
|
|
* pch_spi_writereg() - Performs register writes
|
|
* @master: Pointer to struct spi_master.
|
|
* @idx: Register offset.
|
|
* @val: Value to be written to register.
|
|
*/
|
|
static inline void pch_spi_writereg(struct spi_master *master, int idx, u32 val)
|
|
{
|
|
struct pch_spi_data *data = spi_master_get_devdata(master);
|
|
iowrite32(val, (data->io_remap_addr + idx));
|
|
}
|
|
|
|
/**
|
|
* pch_spi_readreg() - Performs register reads
|
|
* @master: Pointer to struct spi_master.
|
|
* @idx: Register offset.
|
|
*/
|
|
static inline u32 pch_spi_readreg(struct spi_master *master, int idx)
|
|
{
|
|
struct pch_spi_data *data = spi_master_get_devdata(master);
|
|
return ioread32(data->io_remap_addr + idx);
|
|
}
|
|
|
|
static inline void pch_spi_setclr_reg(struct spi_master *master, int idx,
|
|
u32 set, u32 clr)
|
|
{
|
|
u32 tmp = pch_spi_readreg(master, idx);
|
|
tmp = (tmp & ~clr) | set;
|
|
pch_spi_writereg(master, idx, tmp);
|
|
}
|
|
|
|
static void pch_spi_set_master_mode(struct spi_master *master)
|
|
{
|
|
pch_spi_setclr_reg(master, PCH_SPCR, SPCR_MSTR_BIT, 0);
|
|
}
|
|
|
|
/**
|
|
* pch_spi_clear_fifo() - Clears the Transmit and Receive FIFOs
|
|
* @master: Pointer to struct spi_master.
|
|
*/
|
|
static void pch_spi_clear_fifo(struct spi_master *master)
|
|
{
|
|
pch_spi_setclr_reg(master, PCH_SPCR, SPCR_FICLR_BIT, 0);
|
|
pch_spi_setclr_reg(master, PCH_SPCR, 0, SPCR_FICLR_BIT);
|
|
}
|
|
|
|
static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val,
|
|
void __iomem *io_remap_addr)
|
|
{
|
|
u32 n_read, tx_index, rx_index, bpw_len;
|
|
u16 *pkt_rx_buffer, *pkt_tx_buff;
|
|
int read_cnt;
|
|
u32 reg_spcr_val;
|
|
void __iomem *spsr;
|
|
void __iomem *spdrr;
|
|
void __iomem *spdwr;
|
|
|
|
spsr = io_remap_addr + PCH_SPSR;
|
|
iowrite32(reg_spsr_val, spsr);
|
|
|
|
if (data->transfer_active) {
|
|
rx_index = data->rx_index;
|
|
tx_index = data->tx_index;
|
|
bpw_len = data->bpw_len;
|
|
pkt_rx_buffer = data->pkt_rx_buff;
|
|
pkt_tx_buff = data->pkt_tx_buff;
|
|
|
|
spdrr = io_remap_addr + PCH_SPDRR;
|
|
spdwr = io_remap_addr + PCH_SPDWR;
|
|
|
|
n_read = PCH_READABLE(reg_spsr_val);
|
|
|
|
for (read_cnt = 0; (read_cnt < n_read); read_cnt++) {
|
|
pkt_rx_buffer[rx_index++] = ioread32(spdrr);
|
|
if (tx_index < bpw_len)
|
|
iowrite32(pkt_tx_buff[tx_index++], spdwr);
|
|
}
|
|
|
|
/* disable RFI if not needed */
|
|
if ((bpw_len - rx_index) <= PCH_MAX_FIFO_DEPTH) {
|
|
reg_spcr_val = ioread32(io_remap_addr + PCH_SPCR);
|
|
reg_spcr_val &= ~SPCR_RFIE_BIT; /* disable RFI */
|
|
|
|
/* reset rx threshold */
|
|
reg_spcr_val &= ~MASK_RFIC_SPCR_BITS;
|
|
reg_spcr_val |= (PCH_RX_THOLD_MAX << SPCR_RFIC_FIELD);
|
|
|
|
iowrite32(reg_spcr_val, (io_remap_addr + PCH_SPCR));
|
|
}
|
|
|
|
/* update counts */
|
|
data->tx_index = tx_index;
|
|
data->rx_index = rx_index;
|
|
|
|
/* if transfer complete interrupt */
|
|
if (reg_spsr_val & SPSR_FI_BIT) {
|
|
if ((tx_index == bpw_len) && (rx_index == tx_index)) {
|
|
/* disable interrupts */
|
|
pch_spi_setclr_reg(data->master, PCH_SPCR, 0,
|
|
PCH_ALL);
|
|
|
|
/* transfer is completed;
|
|
inform pch_spi_process_messages */
|
|
data->transfer_complete = true;
|
|
data->transfer_active = false;
|
|
wake_up(&data->wait);
|
|
} else {
|
|
dev_vdbg(&data->master->dev,
|
|
"%s : Transfer is not completed",
|
|
__func__);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* pch_spi_handler() - Interrupt handler
|
|
* @irq: The interrupt number.
|
|
* @dev_id: Pointer to struct pch_spi_board_data.
|
|
*/
|
|
static irqreturn_t pch_spi_handler(int irq, void *dev_id)
|
|
{
|
|
u32 reg_spsr_val;
|
|
void __iomem *spsr;
|
|
void __iomem *io_remap_addr;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
struct pch_spi_data *data = dev_id;
|
|
struct pch_spi_board_data *board_dat = data->board_dat;
|
|
|
|
if (board_dat->suspend_sts) {
|
|
dev_dbg(&board_dat->pdev->dev,
|
|
"%s returning due to suspend\n", __func__);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
io_remap_addr = data->io_remap_addr;
|
|
spsr = io_remap_addr + PCH_SPSR;
|
|
|
|
reg_spsr_val = ioread32(spsr);
|
|
|
|
if (reg_spsr_val & SPSR_ORF_BIT) {
|
|
dev_err(&board_dat->pdev->dev, "%s Over run error\n", __func__);
|
|
if (data->current_msg->complete) {
|
|
data->transfer_complete = true;
|
|
data->current_msg->status = -EIO;
|
|
data->current_msg->complete(data->current_msg->context);
|
|
data->bcurrent_msg_processing = false;
|
|
data->current_msg = NULL;
|
|
data->cur_trans = NULL;
|
|
}
|
|
}
|
|
|
|
if (data->use_dma)
|
|
return IRQ_NONE;
|
|
|
|
/* Check if the interrupt is for SPI device */
|
|
if (reg_spsr_val & (SPSR_FI_BIT | SPSR_RFI_BIT)) {
|
|
pch_spi_handler_sub(data, reg_spsr_val, io_remap_addr);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
dev_dbg(&board_dat->pdev->dev, "%s EXIT return value=%d\n",
|
|
__func__, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* pch_spi_set_baud_rate() - Sets SPBR field in SPBRR
|
|
* @master: Pointer to struct spi_master.
|
|
* @speed_hz: Baud rate.
|
|
*/
|
|
static void pch_spi_set_baud_rate(struct spi_master *master, u32 speed_hz)
|
|
{
|
|
u32 n_spbr = PCH_CLOCK_HZ / (speed_hz * 2);
|
|
|
|
/* if baud rate is less than we can support limit it */
|
|
if (n_spbr > PCH_MAX_SPBR)
|
|
n_spbr = PCH_MAX_SPBR;
|
|
|
|
pch_spi_setclr_reg(master, PCH_SPBRR, n_spbr, MASK_SPBRR_SPBR_BITS);
|
|
}
|
|
|
|
/**
|
|
* pch_spi_set_bits_per_word() - Sets SIZE field in SPBRR
|
|
* @master: Pointer to struct spi_master.
|
|
* @bits_per_word: Bits per word for SPI transfer.
|
|
*/
|
|
static void pch_spi_set_bits_per_word(struct spi_master *master,
|
|
u8 bits_per_word)
|
|
{
|
|
if (bits_per_word == 8)
|
|
pch_spi_setclr_reg(master, PCH_SPBRR, 0, SPBRR_SIZE_BIT);
|
|
else
|
|
pch_spi_setclr_reg(master, PCH_SPBRR, SPBRR_SIZE_BIT, 0);
|
|
}
|
|
|
|
/**
|
|
* pch_spi_setup_transfer() - Configures the PCH SPI hardware for transfer
|
|
* @spi: Pointer to struct spi_device.
|
|
*/
|
|
static void pch_spi_setup_transfer(struct spi_device *spi)
|
|
{
|
|
u32 flags = 0;
|
|
|
|
dev_dbg(&spi->dev, "%s SPBRR content =%x setting baud rate=%d\n",
|
|
__func__, pch_spi_readreg(spi->master, PCH_SPBRR),
|
|
spi->max_speed_hz);
|
|
pch_spi_set_baud_rate(spi->master, spi->max_speed_hz);
|
|
|
|
/* set bits per word */
|
|
pch_spi_set_bits_per_word(spi->master, spi->bits_per_word);
|
|
|
|
if (!(spi->mode & SPI_LSB_FIRST))
|
|
flags |= SPCR_LSBF_BIT;
|
|
if (spi->mode & SPI_CPOL)
|
|
flags |= SPCR_CPOL_BIT;
|
|
if (spi->mode & SPI_CPHA)
|
|
flags |= SPCR_CPHA_BIT;
|
|
pch_spi_setclr_reg(spi->master, PCH_SPCR, flags,
|
|
(SPCR_LSBF_BIT | SPCR_CPOL_BIT | SPCR_CPHA_BIT));
|
|
|
|
/* Clear the FIFO by toggling FICLR to 1 and back to 0 */
|
|
pch_spi_clear_fifo(spi->master);
|
|
}
|
|
|
|
/**
|
|
* pch_spi_reset() - Clears SPI registers
|
|
* @master: Pointer to struct spi_master.
|
|
*/
|
|
static void pch_spi_reset(struct spi_master *master)
|
|
{
|
|
/* write 1 to reset SPI */
|
|
pch_spi_writereg(master, PCH_SRST, 0x1);
|
|
|
|
/* clear reset */
|
|
pch_spi_writereg(master, PCH_SRST, 0x0);
|
|
}
|
|
|
|
static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
|
|
{
|
|
struct pch_spi_data *data = spi_master_get_devdata(pspi->master);
|
|
int retval;
|
|
unsigned long flags;
|
|
|
|
/* We won't process any messages if we have been asked to terminate */
|
|
if (data->status == STATUS_EXITING) {
|
|
dev_err(&pspi->dev, "%s status = STATUS_EXITING.\n", __func__);
|
|
retval = -ESHUTDOWN;
|
|
goto err_out;
|
|
}
|
|
|
|
/* If suspended ,return -EINVAL */
|
|
if (data->board_dat->suspend_sts) {
|
|
dev_err(&pspi->dev, "%s suspend; returning EINVAL\n", __func__);
|
|
retval = -EINVAL;
|
|
goto err_out;
|
|
}
|
|
|
|
/* set status of message */
|
|
pmsg->actual_length = 0;
|
|
dev_dbg(&pspi->dev, "%s - pmsg->status =%d\n", __func__, pmsg->status);
|
|
|
|
pmsg->status = -EINPROGRESS;
|
|
spin_lock_irqsave(&data->lock, flags);
|
|
/* add message to queue */
|
|
list_add_tail(&pmsg->queue, &data->queue);
|
|
spin_unlock_irqrestore(&data->lock, flags);
|
|
|
|
dev_dbg(&pspi->dev, "%s - Invoked list_add_tail\n", __func__);
|
|
|
|
schedule_work(&data->work);
|
|
dev_dbg(&pspi->dev, "%s - Invoked queue work\n", __func__);
|
|
|
|
retval = 0;
|
|
|
|
err_out:
|
|
dev_dbg(&pspi->dev, "%s RETURN=%d\n", __func__, retval);
|
|
return retval;
|
|
}
|
|
|
|
static inline void pch_spi_select_chip(struct pch_spi_data *data,
|
|
struct spi_device *pspi)
|
|
{
|
|
if (data->current_chip != NULL) {
|
|
if (pspi->chip_select != data->n_curnt_chip) {
|
|
dev_dbg(&pspi->dev, "%s : different slave\n", __func__);
|
|
data->current_chip = NULL;
|
|
}
|
|
}
|
|
|
|
data->current_chip = pspi;
|
|
|
|
data->n_curnt_chip = data->current_chip->chip_select;
|
|
|
|
dev_dbg(&pspi->dev, "%s :Invoking pch_spi_setup_transfer\n", __func__);
|
|
pch_spi_setup_transfer(pspi);
|
|
}
|
|
|
|
static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw)
|
|
{
|
|
int size;
|
|
u32 n_writes;
|
|
int j;
|
|
struct spi_message *pmsg, *tmp;
|
|
const u8 *tx_buf;
|
|
const u16 *tx_sbuf;
|
|
|
|
/* set baud rate if needed */
|
|
if (data->cur_trans->speed_hz) {
|
|
dev_dbg(&data->master->dev, "%s:setting baud rate\n", __func__);
|
|
pch_spi_set_baud_rate(data->master, data->cur_trans->speed_hz);
|
|
}
|
|
|
|
/* set bits per word if needed */
|
|
if (data->cur_trans->bits_per_word &&
|
|
(data->current_msg->spi->bits_per_word != data->cur_trans->bits_per_word)) {
|
|
dev_dbg(&data->master->dev, "%s:set bits per word\n", __func__);
|
|
pch_spi_set_bits_per_word(data->master,
|
|
data->cur_trans->bits_per_word);
|
|
*bpw = data->cur_trans->bits_per_word;
|
|
} else {
|
|
*bpw = data->current_msg->spi->bits_per_word;
|
|
}
|
|
|
|
/* reset Tx/Rx index */
|
|
data->tx_index = 0;
|
|
data->rx_index = 0;
|
|
|
|
data->bpw_len = data->cur_trans->len / (*bpw / 8);
|
|
|
|
/* find alloc size */
|
|
size = data->cur_trans->len * sizeof(*data->pkt_tx_buff);
|
|
|
|
/* allocate memory for pkt_tx_buff & pkt_rx_buffer */
|
|
data->pkt_tx_buff = kzalloc(size, GFP_KERNEL);
|
|
if (data->pkt_tx_buff != NULL) {
|
|
data->pkt_rx_buff = kzalloc(size, GFP_KERNEL);
|
|
if (!data->pkt_rx_buff) {
|
|
kfree(data->pkt_tx_buff);
|
|
data->pkt_tx_buff = NULL;
|
|
}
|
|
}
|
|
|
|
if (!data->pkt_rx_buff) {
|
|
/* flush queue and set status of all transfers to -ENOMEM */
|
|
list_for_each_entry_safe(pmsg, tmp, data->queue.next, queue) {
|
|
pmsg->status = -ENOMEM;
|
|
|
|
if (pmsg->complete)
|
|
pmsg->complete(pmsg->context);
|
|
|
|
/* delete from queue */
|
|
list_del_init(&pmsg->queue);
|
|
}
|
|
return;
|
|
}
|
|
|
|
/* copy Tx Data */
|
|
if (data->cur_trans->tx_buf != NULL) {
|
|
if (*bpw == 8) {
|
|
tx_buf = data->cur_trans->tx_buf;
|
|
for (j = 0; j < data->bpw_len; j++)
|
|
data->pkt_tx_buff[j] = *tx_buf++;
|
|
} else {
|
|
tx_sbuf = data->cur_trans->tx_buf;
|
|
for (j = 0; j < data->bpw_len; j++)
|
|
data->pkt_tx_buff[j] = *tx_sbuf++;
|
|
}
|
|
}
|
|
|
|
/* if len greater than PCH_MAX_FIFO_DEPTH, write 16,else len bytes */
|
|
n_writes = data->bpw_len;
|
|
if (n_writes > PCH_MAX_FIFO_DEPTH)
|
|
n_writes = PCH_MAX_FIFO_DEPTH;
|
|
|
|
dev_dbg(&data->master->dev,
|
|
"\n%s:Pulling down SSN low - writing 0x2 to SSNXCR\n",
|
|
__func__);
|
|
pch_spi_writereg(data->master, PCH_SSNXCR, SSN_LOW);
|
|
|
|
for (j = 0; j < n_writes; j++)
|
|
pch_spi_writereg(data->master, PCH_SPDWR, data->pkt_tx_buff[j]);
|
|
|
|
/* update tx_index */
|
|
data->tx_index = j;
|
|
|
|
/* reset transfer complete flag */
|
|
data->transfer_complete = false;
|
|
data->transfer_active = true;
|
|
}
|
|
|
|
static void pch_spi_nomore_transfer(struct pch_spi_data *data)
|
|
{
|
|
struct spi_message *pmsg, *tmp;
|
|
dev_dbg(&data->master->dev, "%s called\n", __func__);
|
|
/* Invoke complete callback
|
|
* [To the spi core..indicating end of transfer] */
|
|
data->current_msg->status = 0;
|
|
|
|
if (data->current_msg->complete) {
|
|
dev_dbg(&data->master->dev,
|
|
"%s:Invoking callback of SPI core\n", __func__);
|
|
data->current_msg->complete(data->current_msg->context);
|
|
}
|
|
|
|
/* update status in global variable */
|
|
data->bcurrent_msg_processing = false;
|
|
|
|
dev_dbg(&data->master->dev,
|
|
"%s:data->bcurrent_msg_processing = false\n", __func__);
|
|
|
|
data->current_msg = NULL;
|
|
data->cur_trans = NULL;
|
|
|
|
/* check if we have items in list and not suspending
|
|
* return 1 if list empty */
|
|
if ((list_empty(&data->queue) == 0) &&
|
|
(!data->board_dat->suspend_sts) &&
|
|
(data->status != STATUS_EXITING)) {
|
|
/* We have some more work to do (either there is more tranint
|
|
* bpw;sfer requests in the current message or there are
|
|
*more messages)
|
|
*/
|
|
dev_dbg(&data->master->dev, "%s:Invoke queue_work\n", __func__);
|
|
schedule_work(&data->work);
|
|
} else if (data->board_dat->suspend_sts ||
|
|
data->status == STATUS_EXITING) {
|
|
dev_dbg(&data->master->dev,
|
|
"%s suspend/remove initiated, flushing queue\n",
|
|
__func__);
|
|
list_for_each_entry_safe(pmsg, tmp, data->queue.next, queue) {
|
|
pmsg->status = -EIO;
|
|
|
|
if (pmsg->complete)
|
|
pmsg->complete(pmsg->context);
|
|
|
|
/* delete from queue */
|
|
list_del_init(&pmsg->queue);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void pch_spi_set_ir(struct pch_spi_data *data)
|
|
{
|
|
/* enable interrupts, set threshold, enable SPI */
|
|
if ((data->bpw_len) > PCH_MAX_FIFO_DEPTH)
|
|
/* set receive threshold to PCH_RX_THOLD */
|
|
pch_spi_setclr_reg(data->master, PCH_SPCR,
|
|
PCH_RX_THOLD << SPCR_RFIC_FIELD |
|
|
SPCR_FIE_BIT | SPCR_RFIE_BIT |
|
|
SPCR_ORIE_BIT | SPCR_SPE_BIT,
|
|
MASK_RFIC_SPCR_BITS | PCH_ALL);
|
|
else
|
|
/* set receive threshold to maximum */
|
|
pch_spi_setclr_reg(data->master, PCH_SPCR,
|
|
PCH_RX_THOLD_MAX << SPCR_RFIC_FIELD |
|
|
SPCR_FIE_BIT | SPCR_ORIE_BIT |
|
|
SPCR_SPE_BIT,
|
|
MASK_RFIC_SPCR_BITS | PCH_ALL);
|
|
|
|
/* Wait until the transfer completes; go to sleep after
|
|
initiating the transfer. */
|
|
dev_dbg(&data->master->dev,
|
|
"%s:waiting for transfer to get over\n", __func__);
|
|
|
|
wait_event_interruptible(data->wait, data->transfer_complete);
|
|
|
|
/* clear all interrupts */
|
|
pch_spi_writereg(data->master, PCH_SPSR,
|
|
pch_spi_readreg(data->master, PCH_SPSR));
|
|
/* Disable interrupts and SPI transfer */
|
|
pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL | SPCR_SPE_BIT);
|
|
/* clear FIFO */
|
|
pch_spi_clear_fifo(data->master);
|
|
}
|
|
|
|
static void pch_spi_copy_rx_data(struct pch_spi_data *data, int bpw)
|
|
{
|
|
int j;
|
|
u8 *rx_buf;
|
|
u16 *rx_sbuf;
|
|
|
|
/* copy Rx Data */
|
|
if (!data->cur_trans->rx_buf)
|
|
return;
|
|
|
|
if (bpw == 8) {
|
|
rx_buf = data->cur_trans->rx_buf;
|
|
for (j = 0; j < data->bpw_len; j++)
|
|
*rx_buf++ = data->pkt_rx_buff[j] & 0xFF;
|
|
} else {
|
|
rx_sbuf = data->cur_trans->rx_buf;
|
|
for (j = 0; j < data->bpw_len; j++)
|
|
*rx_sbuf++ = data->pkt_rx_buff[j];
|
|
}
|
|
}
|
|
|
|
static void pch_spi_copy_rx_data_for_dma(struct pch_spi_data *data, int bpw)
|
|
{
|
|
int j;
|
|
u8 *rx_buf;
|
|
u16 *rx_sbuf;
|
|
const u8 *rx_dma_buf;
|
|
const u16 *rx_dma_sbuf;
|
|
|
|
/* copy Rx Data */
|
|
if (!data->cur_trans->rx_buf)
|
|
return;
|
|
|
|
if (bpw == 8) {
|
|
rx_buf = data->cur_trans->rx_buf;
|
|
rx_dma_buf = data->dma.rx_buf_virt;
|
|
for (j = 0; j < data->bpw_len; j++)
|
|
*rx_buf++ = *rx_dma_buf++ & 0xFF;
|
|
data->cur_trans->rx_buf = rx_buf;
|
|
} else {
|
|
rx_sbuf = data->cur_trans->rx_buf;
|
|
rx_dma_sbuf = data->dma.rx_buf_virt;
|
|
for (j = 0; j < data->bpw_len; j++)
|
|
*rx_sbuf++ = *rx_dma_sbuf++;
|
|
data->cur_trans->rx_buf = rx_sbuf;
|
|
}
|
|
}
|
|
|
|
static int pch_spi_start_transfer(struct pch_spi_data *data)
|
|
{
|
|
struct pch_spi_dma_ctrl *dma;
|
|
unsigned long flags;
|
|
int rtn;
|
|
|
|
dma = &data->dma;
|
|
|
|
spin_lock_irqsave(&data->lock, flags);
|
|
|
|
/* disable interrupts, SPI set enable */
|
|
pch_spi_setclr_reg(data->master, PCH_SPCR, SPCR_SPE_BIT, PCH_ALL);
|
|
|
|
spin_unlock_irqrestore(&data->lock, flags);
|
|
|
|
/* Wait until the transfer completes; go to sleep after
|
|
initiating the transfer. */
|
|
dev_dbg(&data->master->dev,
|
|
"%s:waiting for transfer to get over\n", __func__);
|
|
rtn = wait_event_interruptible_timeout(data->wait,
|
|
data->transfer_complete,
|
|
msecs_to_jiffies(2 * HZ));
|
|
if (!rtn)
|
|
dev_err(&data->master->dev,
|
|
"%s wait-event timeout\n", __func__);
|
|
|
|
dma_sync_sg_for_cpu(&data->master->dev, dma->sg_rx_p, dma->nent,
|
|
DMA_FROM_DEVICE);
|
|
|
|
dma_sync_sg_for_cpu(&data->master->dev, dma->sg_tx_p, dma->nent,
|
|
DMA_FROM_DEVICE);
|
|
memset(data->dma.tx_buf_virt, 0, PAGE_SIZE);
|
|
|
|
async_tx_ack(dma->desc_rx);
|
|
async_tx_ack(dma->desc_tx);
|
|
kfree(dma->sg_tx_p);
|
|
kfree(dma->sg_rx_p);
|
|
|
|
spin_lock_irqsave(&data->lock, flags);
|
|
|
|
/* clear fifo threshold, disable interrupts, disable SPI transfer */
|
|
pch_spi_setclr_reg(data->master, PCH_SPCR, 0,
|
|
MASK_RFIC_SPCR_BITS | MASK_TFIC_SPCR_BITS | PCH_ALL |
|
|
SPCR_SPE_BIT);
|
|
/* clear all interrupts */
|
|
pch_spi_writereg(data->master, PCH_SPSR,
|
|
pch_spi_readreg(data->master, PCH_SPSR));
|
|
/* clear FIFO */
|
|
pch_spi_clear_fifo(data->master);
|
|
|
|
spin_unlock_irqrestore(&data->lock, flags);
|
|
|
|
return rtn;
|
|
}
|
|
|
|
static void pch_dma_rx_complete(void *arg)
|
|
{
|
|
struct pch_spi_data *data = arg;
|
|
|
|
/* transfer is completed;inform pch_spi_process_messages_dma */
|
|
data->transfer_complete = true;
|
|
wake_up_interruptible(&data->wait);
|
|
}
|
|
|
|
static bool pch_spi_filter(struct dma_chan *chan, void *slave)
|
|
{
|
|
struct pch_dma_slave *param = slave;
|
|
|
|
if ((chan->chan_id == param->chan_id) &&
|
|
(param->dma_dev == chan->device->dev)) {
|
|
chan->private = param;
|
|
return true;
|
|
} else {
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static void pch_spi_request_dma(struct pch_spi_data *data, int bpw)
|
|
{
|
|
dma_cap_mask_t mask;
|
|
struct dma_chan *chan;
|
|
struct pci_dev *dma_dev;
|
|
struct pch_dma_slave *param;
|
|
struct pch_spi_dma_ctrl *dma;
|
|
unsigned int width;
|
|
|
|
if (bpw == 8)
|
|
width = PCH_DMA_WIDTH_1_BYTE;
|
|
else
|
|
width = PCH_DMA_WIDTH_2_BYTES;
|
|
|
|
dma = &data->dma;
|
|
dma_cap_zero(mask);
|
|
dma_cap_set(DMA_SLAVE, mask);
|
|
|
|
/* Get DMA's dev information */
|
|
dma_dev = pci_get_slot(data->board_dat->pdev->bus,
|
|
PCI_DEVFN(PCI_SLOT(data->board_dat->pdev->devfn), 0));
|
|
|
|
/* Set Tx DMA */
|
|
param = &dma->param_tx;
|
|
param->dma_dev = &dma_dev->dev;
|
|
param->chan_id = data->ch * 2; /* Tx = 0, 2 */
|
|
param->tx_reg = data->io_base_addr + PCH_SPDWR;
|
|
param->width = width;
|
|
chan = dma_request_channel(mask, pch_spi_filter, param);
|
|
if (!chan) {
|
|
dev_err(&data->master->dev,
|
|
"ERROR: dma_request_channel FAILS(Tx)\n");
|
|
goto out;
|
|
}
|
|
dma->chan_tx = chan;
|
|
|
|
/* Set Rx DMA */
|
|
param = &dma->param_rx;
|
|
param->dma_dev = &dma_dev->dev;
|
|
param->chan_id = data->ch * 2 + 1; /* Rx = Tx + 1 */
|
|
param->rx_reg = data->io_base_addr + PCH_SPDRR;
|
|
param->width = width;
|
|
chan = dma_request_channel(mask, pch_spi_filter, param);
|
|
if (!chan) {
|
|
dev_err(&data->master->dev,
|
|
"ERROR: dma_request_channel FAILS(Rx)\n");
|
|
dma_release_channel(dma->chan_tx);
|
|
dma->chan_tx = NULL;
|
|
goto out;
|
|
}
|
|
dma->chan_rx = chan;
|
|
|
|
dma->dma_dev = dma_dev;
|
|
return;
|
|
out:
|
|
pci_dev_put(dma_dev);
|
|
data->use_dma = 0;
|
|
}
|
|
|
|
static void pch_spi_release_dma(struct pch_spi_data *data)
|
|
{
|
|
struct pch_spi_dma_ctrl *dma;
|
|
|
|
dma = &data->dma;
|
|
if (dma->chan_tx) {
|
|
dma_release_channel(dma->chan_tx);
|
|
dma->chan_tx = NULL;
|
|
}
|
|
if (dma->chan_rx) {
|
|
dma_release_channel(dma->chan_rx);
|
|
dma->chan_rx = NULL;
|
|
}
|
|
|
|
pci_dev_put(dma->dma_dev);
|
|
}
|
|
|
|
static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
|
|
{
|
|
const u8 *tx_buf;
|
|
const u16 *tx_sbuf;
|
|
u8 *tx_dma_buf;
|
|
u16 *tx_dma_sbuf;
|
|
struct scatterlist *sg;
|
|
struct dma_async_tx_descriptor *desc_tx;
|
|
struct dma_async_tx_descriptor *desc_rx;
|
|
int num;
|
|
int i;
|
|
int size;
|
|
int rem;
|
|
int head;
|
|
unsigned long flags;
|
|
struct pch_spi_dma_ctrl *dma;
|
|
|
|
dma = &data->dma;
|
|
|
|
/* set baud rate if needed */
|
|
if (data->cur_trans->speed_hz) {
|
|
dev_dbg(&data->master->dev, "%s:setting baud rate\n", __func__);
|
|
spin_lock_irqsave(&data->lock, flags);
|
|
pch_spi_set_baud_rate(data->master, data->cur_trans->speed_hz);
|
|
spin_unlock_irqrestore(&data->lock, flags);
|
|
}
|
|
|
|
/* set bits per word if needed */
|
|
if (data->cur_trans->bits_per_word &&
|
|
(data->current_msg->spi->bits_per_word !=
|
|
data->cur_trans->bits_per_word)) {
|
|
dev_dbg(&data->master->dev, "%s:set bits per word\n", __func__);
|
|
spin_lock_irqsave(&data->lock, flags);
|
|
pch_spi_set_bits_per_word(data->master,
|
|
data->cur_trans->bits_per_word);
|
|
spin_unlock_irqrestore(&data->lock, flags);
|
|
*bpw = data->cur_trans->bits_per_word;
|
|
} else {
|
|
*bpw = data->current_msg->spi->bits_per_word;
|
|
}
|
|
data->bpw_len = data->cur_trans->len / (*bpw / 8);
|
|
|
|
if (data->bpw_len > PCH_BUF_SIZE) {
|
|
data->bpw_len = PCH_BUF_SIZE;
|
|
data->cur_trans->len -= PCH_BUF_SIZE;
|
|
}
|
|
|
|
/* copy Tx Data */
|
|
if (data->cur_trans->tx_buf != NULL) {
|
|
if (*bpw == 8) {
|
|
tx_buf = data->cur_trans->tx_buf;
|
|
tx_dma_buf = dma->tx_buf_virt;
|
|
for (i = 0; i < data->bpw_len; i++)
|
|
*tx_dma_buf++ = *tx_buf++;
|
|
} else {
|
|
tx_sbuf = data->cur_trans->tx_buf;
|
|
tx_dma_sbuf = dma->tx_buf_virt;
|
|
for (i = 0; i < data->bpw_len; i++)
|
|
*tx_dma_sbuf++ = *tx_sbuf++;
|
|
}
|
|
}
|
|
|
|
/* Calculate Rx parameter for DMA transmitting */
|
|
if (data->bpw_len > PCH_DMA_TRANS_SIZE) {
|
|
if (data->bpw_len % PCH_DMA_TRANS_SIZE) {
|
|
num = data->bpw_len / PCH_DMA_TRANS_SIZE + 1;
|
|
rem = data->bpw_len % PCH_DMA_TRANS_SIZE;
|
|
} else {
|
|
num = data->bpw_len / PCH_DMA_TRANS_SIZE;
|
|
rem = PCH_DMA_TRANS_SIZE;
|
|
}
|
|
size = PCH_DMA_TRANS_SIZE;
|
|
} else {
|
|
num = 1;
|
|
size = data->bpw_len;
|
|
rem = data->bpw_len;
|
|
}
|
|
dev_dbg(&data->master->dev, "%s num=%d size=%d rem=%d\n",
|
|
__func__, num, size, rem);
|
|
spin_lock_irqsave(&data->lock, flags);
|
|
|
|
/* set receive fifo threshold and transmit fifo threshold */
|
|
pch_spi_setclr_reg(data->master, PCH_SPCR,
|
|
((size - 1) << SPCR_RFIC_FIELD) |
|
|
(PCH_TX_THOLD << SPCR_TFIC_FIELD),
|
|
MASK_RFIC_SPCR_BITS | MASK_TFIC_SPCR_BITS);
|
|
|
|
spin_unlock_irqrestore(&data->lock, flags);
|
|
|
|
/* RX */
|
|
dma->sg_rx_p = kmalloc_array(num, sizeof(*dma->sg_rx_p), GFP_ATOMIC);
|
|
if (!dma->sg_rx_p)
|
|
return;
|
|
|
|
sg_init_table(dma->sg_rx_p, num); /* Initialize SG table */
|
|
/* offset, length setting */
|
|
sg = dma->sg_rx_p;
|
|
for (i = 0; i < num; i++, sg++) {
|
|
if (i == (num - 2)) {
|
|
sg->offset = size * i;
|
|
sg->offset = sg->offset * (*bpw / 8);
|
|
sg_set_page(sg, virt_to_page(dma->rx_buf_virt), rem,
|
|
sg->offset);
|
|
sg_dma_len(sg) = rem;
|
|
} else if (i == (num - 1)) {
|
|
sg->offset = size * (i - 1) + rem;
|
|
sg->offset = sg->offset * (*bpw / 8);
|
|
sg_set_page(sg, virt_to_page(dma->rx_buf_virt), size,
|
|
sg->offset);
|
|
sg_dma_len(sg) = size;
|
|
} else {
|
|
sg->offset = size * i;
|
|
sg->offset = sg->offset * (*bpw / 8);
|
|
sg_set_page(sg, virt_to_page(dma->rx_buf_virt), size,
|
|
sg->offset);
|
|
sg_dma_len(sg) = size;
|
|
}
|
|
sg_dma_address(sg) = dma->rx_buf_dma + sg->offset;
|
|
}
|
|
sg = dma->sg_rx_p;
|
|
desc_rx = dmaengine_prep_slave_sg(dma->chan_rx, sg,
|
|
num, DMA_DEV_TO_MEM,
|
|
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
if (!desc_rx) {
|
|
dev_err(&data->master->dev,
|
|
"%s:dmaengine_prep_slave_sg Failed\n", __func__);
|
|
return;
|
|
}
|
|
dma_sync_sg_for_device(&data->master->dev, sg, num, DMA_FROM_DEVICE);
|
|
desc_rx->callback = pch_dma_rx_complete;
|
|
desc_rx->callback_param = data;
|
|
dma->nent = num;
|
|
dma->desc_rx = desc_rx;
|
|
|
|
/* Calculate Tx parameter for DMA transmitting */
|
|
if (data->bpw_len > PCH_MAX_FIFO_DEPTH) {
|
|
head = PCH_MAX_FIFO_DEPTH - PCH_DMA_TRANS_SIZE;
|
|
if (data->bpw_len % PCH_DMA_TRANS_SIZE > 4) {
|
|
num = data->bpw_len / PCH_DMA_TRANS_SIZE + 1;
|
|
rem = data->bpw_len % PCH_DMA_TRANS_SIZE - head;
|
|
} else {
|
|
num = data->bpw_len / PCH_DMA_TRANS_SIZE;
|
|
rem = data->bpw_len % PCH_DMA_TRANS_SIZE +
|
|
PCH_DMA_TRANS_SIZE - head;
|
|
}
|
|
size = PCH_DMA_TRANS_SIZE;
|
|
} else {
|
|
num = 1;
|
|
size = data->bpw_len;
|
|
rem = data->bpw_len;
|
|
head = 0;
|
|
}
|
|
|
|
dma->sg_tx_p = kmalloc_array(num, sizeof(*dma->sg_tx_p), GFP_ATOMIC);
|
|
if (!dma->sg_tx_p)
|
|
return;
|
|
|
|
sg_init_table(dma->sg_tx_p, num); /* Initialize SG table */
|
|
/* offset, length setting */
|
|
sg = dma->sg_tx_p;
|
|
for (i = 0; i < num; i++, sg++) {
|
|
if (i == 0) {
|
|
sg->offset = 0;
|
|
sg_set_page(sg, virt_to_page(dma->tx_buf_virt), size + head,
|
|
sg->offset);
|
|
sg_dma_len(sg) = size + head;
|
|
} else if (i == (num - 1)) {
|
|
sg->offset = head + size * i;
|
|
sg->offset = sg->offset * (*bpw / 8);
|
|
sg_set_page(sg, virt_to_page(dma->tx_buf_virt), rem,
|
|
sg->offset);
|
|
sg_dma_len(sg) = rem;
|
|
} else {
|
|
sg->offset = head + size * i;
|
|
sg->offset = sg->offset * (*bpw / 8);
|
|
sg_set_page(sg, virt_to_page(dma->tx_buf_virt), size,
|
|
sg->offset);
|
|
sg_dma_len(sg) = size;
|
|
}
|
|
sg_dma_address(sg) = dma->tx_buf_dma + sg->offset;
|
|
}
|
|
sg = dma->sg_tx_p;
|
|
desc_tx = dmaengine_prep_slave_sg(dma->chan_tx,
|
|
sg, num, DMA_MEM_TO_DEV,
|
|
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
if (!desc_tx) {
|
|
dev_err(&data->master->dev,
|
|
"%s:dmaengine_prep_slave_sg Failed\n", __func__);
|
|
return;
|
|
}
|
|
dma_sync_sg_for_device(&data->master->dev, sg, num, DMA_TO_DEVICE);
|
|
desc_tx->callback = NULL;
|
|
desc_tx->callback_param = data;
|
|
dma->nent = num;
|
|
dma->desc_tx = desc_tx;
|
|
|
|
dev_dbg(&data->master->dev, "%s:Pulling down SSN low - writing 0x2 to SSNXCR\n", __func__);
|
|
|
|
spin_lock_irqsave(&data->lock, flags);
|
|
pch_spi_writereg(data->master, PCH_SSNXCR, SSN_LOW);
|
|
desc_rx->tx_submit(desc_rx);
|
|
desc_tx->tx_submit(desc_tx);
|
|
spin_unlock_irqrestore(&data->lock, flags);
|
|
|
|
/* reset transfer complete flag */
|
|
data->transfer_complete = false;
|
|
}
|
|
|
|
static void pch_spi_process_messages(struct work_struct *pwork)
|
|
{
|
|
struct spi_message *pmsg, *tmp;
|
|
struct pch_spi_data *data;
|
|
int bpw;
|
|
|
|
data = container_of(pwork, struct pch_spi_data, work);
|
|
dev_dbg(&data->master->dev, "%s data initialized\n", __func__);
|
|
|
|
spin_lock(&data->lock);
|
|
/* check if suspend has been initiated;if yes flush queue */
|
|
if (data->board_dat->suspend_sts || (data->status == STATUS_EXITING)) {
|
|
dev_dbg(&data->master->dev,
|
|
"%s suspend/remove initiated, flushing queue\n", __func__);
|
|
list_for_each_entry_safe(pmsg, tmp, data->queue.next, queue) {
|
|
pmsg->status = -EIO;
|
|
|
|
if (pmsg->complete) {
|
|
spin_unlock(&data->lock);
|
|
pmsg->complete(pmsg->context);
|
|
spin_lock(&data->lock);
|
|
}
|
|
|
|
/* delete from queue */
|
|
list_del_init(&pmsg->queue);
|
|
}
|
|
|
|
spin_unlock(&data->lock);
|
|
return;
|
|
}
|
|
|
|
data->bcurrent_msg_processing = true;
|
|
dev_dbg(&data->master->dev,
|
|
"%s Set data->bcurrent_msg_processing= true\n", __func__);
|
|
|
|
/* Get the message from the queue and delete it from there. */
|
|
data->current_msg = list_entry(data->queue.next, struct spi_message,
|
|
queue);
|
|
|
|
list_del_init(&data->current_msg->queue);
|
|
|
|
data->current_msg->status = 0;
|
|
|
|
pch_spi_select_chip(data, data->current_msg->spi);
|
|
|
|
spin_unlock(&data->lock);
|
|
|
|
if (data->use_dma)
|
|
pch_spi_request_dma(data,
|
|
data->current_msg->spi->bits_per_word);
|
|
pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL);
|
|
do {
|
|
int cnt;
|
|
/* If we are already processing a message get the next
|
|
transfer structure from the message otherwise retrieve
|
|
the 1st transfer request from the message. */
|
|
spin_lock(&data->lock);
|
|
if (data->cur_trans == NULL) {
|
|
data->cur_trans =
|
|
list_entry(data->current_msg->transfers.next,
|
|
struct spi_transfer, transfer_list);
|
|
dev_dbg(&data->master->dev,
|
|
"%s :Getting 1st transfer message\n",
|
|
__func__);
|
|
} else {
|
|
data->cur_trans =
|
|
list_entry(data->cur_trans->transfer_list.next,
|
|
struct spi_transfer, transfer_list);
|
|
dev_dbg(&data->master->dev,
|
|
"%s :Getting next transfer message\n",
|
|
__func__);
|
|
}
|
|
spin_unlock(&data->lock);
|
|
|
|
if (!data->cur_trans->len)
|
|
goto out;
|
|
cnt = (data->cur_trans->len - 1) / PCH_BUF_SIZE + 1;
|
|
data->save_total_len = data->cur_trans->len;
|
|
if (data->use_dma) {
|
|
int i;
|
|
char *save_rx_buf = data->cur_trans->rx_buf;
|
|
|
|
for (i = 0; i < cnt; i++) {
|
|
pch_spi_handle_dma(data, &bpw);
|
|
if (!pch_spi_start_transfer(data)) {
|
|
data->transfer_complete = true;
|
|
data->current_msg->status = -EIO;
|
|
data->current_msg->complete
|
|
(data->current_msg->context);
|
|
data->bcurrent_msg_processing = false;
|
|
data->current_msg = NULL;
|
|
data->cur_trans = NULL;
|
|
goto out;
|
|
}
|
|
pch_spi_copy_rx_data_for_dma(data, bpw);
|
|
}
|
|
data->cur_trans->rx_buf = save_rx_buf;
|
|
} else {
|
|
pch_spi_set_tx(data, &bpw);
|
|
pch_spi_set_ir(data);
|
|
pch_spi_copy_rx_data(data, bpw);
|
|
kfree(data->pkt_rx_buff);
|
|
data->pkt_rx_buff = NULL;
|
|
kfree(data->pkt_tx_buff);
|
|
data->pkt_tx_buff = NULL;
|
|
}
|
|
/* increment message count */
|
|
data->cur_trans->len = data->save_total_len;
|
|
data->current_msg->actual_length += data->cur_trans->len;
|
|
|
|
dev_dbg(&data->master->dev,
|
|
"%s:data->current_msg->actual_length=%d\n",
|
|
__func__, data->current_msg->actual_length);
|
|
|
|
spi_transfer_delay_exec(data->cur_trans);
|
|
|
|
spin_lock(&data->lock);
|
|
|
|
/* No more transfer in this message. */
|
|
if ((data->cur_trans->transfer_list.next) ==
|
|
&(data->current_msg->transfers)) {
|
|
pch_spi_nomore_transfer(data);
|
|
}
|
|
|
|
spin_unlock(&data->lock);
|
|
|
|
} while (data->cur_trans != NULL);
|
|
|
|
out:
|
|
pch_spi_writereg(data->master, PCH_SSNXCR, SSN_HIGH);
|
|
if (data->use_dma)
|
|
pch_spi_release_dma(data);
|
|
}
|
|
|
|
static void pch_spi_free_resources(struct pch_spi_board_data *board_dat,
|
|
struct pch_spi_data *data)
|
|
{
|
|
dev_dbg(&board_dat->pdev->dev, "%s ENTRY\n", __func__);
|
|
|
|
flush_work(&data->work);
|
|
}
|
|
|
|
static int pch_spi_get_resources(struct pch_spi_board_data *board_dat,
|
|
struct pch_spi_data *data)
|
|
{
|
|
dev_dbg(&board_dat->pdev->dev, "%s ENTRY\n", __func__);
|
|
|
|
/* reset PCH SPI h/w */
|
|
pch_spi_reset(data->master);
|
|
dev_dbg(&board_dat->pdev->dev,
|
|
"%s pch_spi_reset invoked successfully\n", __func__);
|
|
|
|
dev_dbg(&board_dat->pdev->dev, "%s data->irq_reg_sts=true\n", __func__);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pch_free_dma_buf(struct pch_spi_board_data *board_dat,
|
|
struct pch_spi_data *data)
|
|
{
|
|
struct pch_spi_dma_ctrl *dma;
|
|
|
|
dma = &data->dma;
|
|
if (dma->tx_buf_dma)
|
|
dma_free_coherent(&board_dat->pdev->dev, PCH_BUF_SIZE,
|
|
dma->tx_buf_virt, dma->tx_buf_dma);
|
|
if (dma->rx_buf_dma)
|
|
dma_free_coherent(&board_dat->pdev->dev, PCH_BUF_SIZE,
|
|
dma->rx_buf_virt, dma->rx_buf_dma);
|
|
}
|
|
|
|
static int pch_alloc_dma_buf(struct pch_spi_board_data *board_dat,
|
|
struct pch_spi_data *data)
|
|
{
|
|
struct pch_spi_dma_ctrl *dma;
|
|
int ret;
|
|
|
|
dma = &data->dma;
|
|
ret = 0;
|
|
/* Get Consistent memory for Tx DMA */
|
|
dma->tx_buf_virt = dma_alloc_coherent(&board_dat->pdev->dev,
|
|
PCH_BUF_SIZE, &dma->tx_buf_dma, GFP_KERNEL);
|
|
if (!dma->tx_buf_virt)
|
|
ret = -ENOMEM;
|
|
|
|
/* Get Consistent memory for Rx DMA */
|
|
dma->rx_buf_virt = dma_alloc_coherent(&board_dat->pdev->dev,
|
|
PCH_BUF_SIZE, &dma->rx_buf_dma, GFP_KERNEL);
|
|
if (!dma->rx_buf_virt)
|
|
ret = -ENOMEM;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int pch_spi_pd_probe(struct platform_device *plat_dev)
|
|
{
|
|
int ret;
|
|
struct spi_master *master;
|
|
struct pch_spi_board_data *board_dat = dev_get_platdata(&plat_dev->dev);
|
|
struct pch_spi_data *data;
|
|
|
|
dev_dbg(&plat_dev->dev, "%s:debug\n", __func__);
|
|
|
|
master = spi_alloc_master(&board_dat->pdev->dev,
|
|
sizeof(struct pch_spi_data));
|
|
if (!master) {
|
|
dev_err(&plat_dev->dev, "spi_alloc_master[%d] failed.\n",
|
|
plat_dev->id);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
data = spi_master_get_devdata(master);
|
|
data->master = master;
|
|
|
|
platform_set_drvdata(plat_dev, data);
|
|
|
|
/* baseaddress + address offset) */
|
|
data->io_base_addr = pci_resource_start(board_dat->pdev, 1) +
|
|
PCH_ADDRESS_SIZE * plat_dev->id;
|
|
data->io_remap_addr = pci_iomap(board_dat->pdev, 1, 0);
|
|
if (!data->io_remap_addr) {
|
|
dev_err(&plat_dev->dev, "%s pci_iomap failed\n", __func__);
|
|
ret = -ENOMEM;
|
|
goto err_pci_iomap;
|
|
}
|
|
data->io_remap_addr += PCH_ADDRESS_SIZE * plat_dev->id;
|
|
|
|
dev_dbg(&plat_dev->dev, "[ch%d] remap_addr=%p\n",
|
|
plat_dev->id, data->io_remap_addr);
|
|
|
|
/* initialize members of SPI master */
|
|
master->num_chipselect = PCH_MAX_CS;
|
|
master->transfer = pch_spi_transfer;
|
|
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
|
|
master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
|
|
master->max_speed_hz = PCH_MAX_BAUDRATE;
|
|
master->flags = SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX;
|
|
|
|
data->board_dat = board_dat;
|
|
data->plat_dev = plat_dev;
|
|
data->n_curnt_chip = 255;
|
|
data->status = STATUS_RUNNING;
|
|
data->ch = plat_dev->id;
|
|
data->use_dma = use_dma;
|
|
|
|
INIT_LIST_HEAD(&data->queue);
|
|
spin_lock_init(&data->lock);
|
|
INIT_WORK(&data->work, pch_spi_process_messages);
|
|
init_waitqueue_head(&data->wait);
|
|
|
|
ret = pch_spi_get_resources(board_dat, data);
|
|
if (ret) {
|
|
dev_err(&plat_dev->dev, "%s fail(retval=%d)\n", __func__, ret);
|
|
goto err_spi_get_resources;
|
|
}
|
|
|
|
ret = request_irq(board_dat->pdev->irq, pch_spi_handler,
|
|
IRQF_SHARED, KBUILD_MODNAME, data);
|
|
if (ret) {
|
|
dev_err(&plat_dev->dev,
|
|
"%s request_irq failed\n", __func__);
|
|
goto err_request_irq;
|
|
}
|
|
data->irq_reg_sts = true;
|
|
|
|
pch_spi_set_master_mode(master);
|
|
|
|
if (use_dma) {
|
|
dev_info(&plat_dev->dev, "Use DMA for data transfers\n");
|
|
ret = pch_alloc_dma_buf(board_dat, data);
|
|
if (ret)
|
|
goto err_spi_register_master;
|
|
}
|
|
|
|
ret = spi_register_master(master);
|
|
if (ret != 0) {
|
|
dev_err(&plat_dev->dev,
|
|
"%s spi_register_master FAILED\n", __func__);
|
|
goto err_spi_register_master;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_spi_register_master:
|
|
pch_free_dma_buf(board_dat, data);
|
|
free_irq(board_dat->pdev->irq, data);
|
|
err_request_irq:
|
|
pch_spi_free_resources(board_dat, data);
|
|
err_spi_get_resources:
|
|
pci_iounmap(board_dat->pdev, data->io_remap_addr);
|
|
err_pci_iomap:
|
|
spi_master_put(master);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int pch_spi_pd_remove(struct platform_device *plat_dev)
|
|
{
|
|
struct pch_spi_board_data *board_dat = dev_get_platdata(&plat_dev->dev);
|
|
struct pch_spi_data *data = platform_get_drvdata(plat_dev);
|
|
int count;
|
|
unsigned long flags;
|
|
|
|
dev_dbg(&plat_dev->dev, "%s:[ch%d] irq=%d\n",
|
|
__func__, plat_dev->id, board_dat->pdev->irq);
|
|
|
|
if (use_dma)
|
|
pch_free_dma_buf(board_dat, data);
|
|
|
|
/* check for any pending messages; no action is taken if the queue
|
|
* is still full; but at least we tried. Unload anyway */
|
|
count = 500;
|
|
spin_lock_irqsave(&data->lock, flags);
|
|
data->status = STATUS_EXITING;
|
|
while ((list_empty(&data->queue) == 0) && --count) {
|
|
dev_dbg(&board_dat->pdev->dev, "%s :queue not empty\n",
|
|
__func__);
|
|
spin_unlock_irqrestore(&data->lock, flags);
|
|
msleep(PCH_SLEEP_TIME);
|
|
spin_lock_irqsave(&data->lock, flags);
|
|
}
|
|
spin_unlock_irqrestore(&data->lock, flags);
|
|
|
|
pch_spi_free_resources(board_dat, data);
|
|
/* disable interrupts & free IRQ */
|
|
if (data->irq_reg_sts) {
|
|
/* disable interrupts */
|
|
pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL);
|
|
data->irq_reg_sts = false;
|
|
free_irq(board_dat->pdev->irq, data);
|
|
}
|
|
|
|
pci_iounmap(board_dat->pdev, data->io_remap_addr);
|
|
spi_unregister_master(data->master);
|
|
|
|
return 0;
|
|
}
|
|
#ifdef CONFIG_PM
|
|
static int pch_spi_pd_suspend(struct platform_device *pd_dev,
|
|
pm_message_t state)
|
|
{
|
|
u8 count;
|
|
struct pch_spi_board_data *board_dat = dev_get_platdata(&pd_dev->dev);
|
|
struct pch_spi_data *data = platform_get_drvdata(pd_dev);
|
|
|
|
dev_dbg(&pd_dev->dev, "%s ENTRY\n", __func__);
|
|
|
|
if (!board_dat) {
|
|
dev_err(&pd_dev->dev,
|
|
"%s pci_get_drvdata returned NULL\n", __func__);
|
|
return -EFAULT;
|
|
}
|
|
|
|
/* check if the current message is processed:
|
|
Only after thats done the transfer will be suspended */
|
|
count = 255;
|
|
while ((--count) > 0) {
|
|
if (!(data->bcurrent_msg_processing))
|
|
break;
|
|
msleep(PCH_SLEEP_TIME);
|
|
}
|
|
|
|
/* Free IRQ */
|
|
if (data->irq_reg_sts) {
|
|
/* disable all interrupts */
|
|
pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL);
|
|
pch_spi_reset(data->master);
|
|
free_irq(board_dat->pdev->irq, data);
|
|
|
|
data->irq_reg_sts = false;
|
|
dev_dbg(&pd_dev->dev,
|
|
"%s free_irq invoked successfully.\n", __func__);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pch_spi_pd_resume(struct platform_device *pd_dev)
|
|
{
|
|
struct pch_spi_board_data *board_dat = dev_get_platdata(&pd_dev->dev);
|
|
struct pch_spi_data *data = platform_get_drvdata(pd_dev);
|
|
int retval;
|
|
|
|
if (!board_dat) {
|
|
dev_err(&pd_dev->dev,
|
|
"%s pci_get_drvdata returned NULL\n", __func__);
|
|
return -EFAULT;
|
|
}
|
|
|
|
if (!data->irq_reg_sts) {
|
|
/* register IRQ */
|
|
retval = request_irq(board_dat->pdev->irq, pch_spi_handler,
|
|
IRQF_SHARED, KBUILD_MODNAME, data);
|
|
if (retval < 0) {
|
|
dev_err(&pd_dev->dev,
|
|
"%s request_irq failed\n", __func__);
|
|
return retval;
|
|
}
|
|
|
|
/* reset PCH SPI h/w */
|
|
pch_spi_reset(data->master);
|
|
pch_spi_set_master_mode(data->master);
|
|
data->irq_reg_sts = true;
|
|
}
|
|
return 0;
|
|
}
|
|
#else
|
|
#define pch_spi_pd_suspend NULL
|
|
#define pch_spi_pd_resume NULL
|
|
#endif
|
|
|
|
static struct platform_driver pch_spi_pd_driver = {
|
|
.driver = {
|
|
.name = "pch-spi",
|
|
},
|
|
.probe = pch_spi_pd_probe,
|
|
.remove = pch_spi_pd_remove,
|
|
.suspend = pch_spi_pd_suspend,
|
|
.resume = pch_spi_pd_resume
|
|
};
|
|
|
|
static int pch_spi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
struct pch_spi_board_data *board_dat;
|
|
struct platform_device *pd_dev = NULL;
|
|
int retval;
|
|
int i;
|
|
struct pch_pd_dev_save *pd_dev_save;
|
|
|
|
pd_dev_save = kzalloc(sizeof(*pd_dev_save), GFP_KERNEL);
|
|
if (!pd_dev_save)
|
|
return -ENOMEM;
|
|
|
|
board_dat = kzalloc(sizeof(*board_dat), GFP_KERNEL);
|
|
if (!board_dat) {
|
|
retval = -ENOMEM;
|
|
goto err_no_mem;
|
|
}
|
|
|
|
retval = pci_request_regions(pdev, KBUILD_MODNAME);
|
|
if (retval) {
|
|
dev_err(&pdev->dev, "%s request_region failed\n", __func__);
|
|
goto pci_request_regions;
|
|
}
|
|
|
|
board_dat->pdev = pdev;
|
|
board_dat->num = id->driver_data;
|
|
pd_dev_save->num = id->driver_data;
|
|
pd_dev_save->board_dat = board_dat;
|
|
|
|
retval = pci_enable_device(pdev);
|
|
if (retval) {
|
|
dev_err(&pdev->dev, "%s pci_enable_device failed\n", __func__);
|
|
goto pci_enable_device;
|
|
}
|
|
|
|
for (i = 0; i < board_dat->num; i++) {
|
|
pd_dev = platform_device_alloc("pch-spi", i);
|
|
if (!pd_dev) {
|
|
dev_err(&pdev->dev, "platform_device_alloc failed\n");
|
|
retval = -ENOMEM;
|
|
goto err_platform_device;
|
|
}
|
|
pd_dev_save->pd_save[i] = pd_dev;
|
|
pd_dev->dev.parent = &pdev->dev;
|
|
|
|
retval = platform_device_add_data(pd_dev, board_dat,
|
|
sizeof(*board_dat));
|
|
if (retval) {
|
|
dev_err(&pdev->dev,
|
|
"platform_device_add_data failed\n");
|
|
platform_device_put(pd_dev);
|
|
goto err_platform_device;
|
|
}
|
|
|
|
retval = platform_device_add(pd_dev);
|
|
if (retval) {
|
|
dev_err(&pdev->dev, "platform_device_add failed\n");
|
|
platform_device_put(pd_dev);
|
|
goto err_platform_device;
|
|
}
|
|
}
|
|
|
|
pci_set_drvdata(pdev, pd_dev_save);
|
|
|
|
return 0;
|
|
|
|
err_platform_device:
|
|
while (--i >= 0)
|
|
platform_device_unregister(pd_dev_save->pd_save[i]);
|
|
pci_disable_device(pdev);
|
|
pci_enable_device:
|
|
pci_release_regions(pdev);
|
|
pci_request_regions:
|
|
kfree(board_dat);
|
|
err_no_mem:
|
|
kfree(pd_dev_save);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static void pch_spi_remove(struct pci_dev *pdev)
|
|
{
|
|
int i;
|
|
struct pch_pd_dev_save *pd_dev_save = pci_get_drvdata(pdev);
|
|
|
|
dev_dbg(&pdev->dev, "%s ENTRY:pdev=%p\n", __func__, pdev);
|
|
|
|
for (i = 0; i < pd_dev_save->num; i++)
|
|
platform_device_unregister(pd_dev_save->pd_save[i]);
|
|
|
|
pci_disable_device(pdev);
|
|
pci_release_regions(pdev);
|
|
kfree(pd_dev_save->board_dat);
|
|
kfree(pd_dev_save);
|
|
}
|
|
|
|
static int __maybe_unused pch_spi_suspend(struct device *dev)
|
|
{
|
|
struct pch_pd_dev_save *pd_dev_save = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(dev, "%s ENTRY\n", __func__);
|
|
|
|
pd_dev_save->board_dat->suspend_sts = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused pch_spi_resume(struct device *dev)
|
|
{
|
|
struct pch_pd_dev_save *pd_dev_save = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(dev, "%s ENTRY\n", __func__);
|
|
|
|
/* set suspend status to false */
|
|
pd_dev_save->board_dat->suspend_sts = false;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(pch_spi_pm_ops, pch_spi_suspend, pch_spi_resume);
|
|
|
|
static struct pci_driver pch_spi_pcidev_driver = {
|
|
.name = "pch_spi",
|
|
.id_table = pch_spi_pcidev_id,
|
|
.probe = pch_spi_probe,
|
|
.remove = pch_spi_remove,
|
|
.driver.pm = &pch_spi_pm_ops,
|
|
};
|
|
|
|
static int __init pch_spi_init(void)
|
|
{
|
|
int ret;
|
|
ret = platform_driver_register(&pch_spi_pd_driver);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = pci_register_driver(&pch_spi_pcidev_driver);
|
|
if (ret) {
|
|
platform_driver_unregister(&pch_spi_pd_driver);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
module_init(pch_spi_init);
|
|
|
|
static void __exit pch_spi_exit(void)
|
|
{
|
|
pci_unregister_driver(&pch_spi_pcidev_driver);
|
|
platform_driver_unregister(&pch_spi_pd_driver);
|
|
}
|
|
module_exit(pch_spi_exit);
|
|
|
|
module_param(use_dma, int, 0644);
|
|
MODULE_PARM_DESC(use_dma,
|
|
"to use DMA for data transfers pass 1 else 0; default 1");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semiconductor ML7xxx IOH SPI Driver");
|
|
MODULE_DEVICE_TABLE(pci, pch_spi_pcidev_id);
|
|
|