WSL2-Linux-Kernel/arch/arm/mach-omap2/opp2420_data.c

131 строка
4.9 KiB
C

/*
* opp2420_data.c - old-style "OPP" table for OMAP2420
*
* Copyright (C) 2005-2009 Texas Instruments, Inc.
* Copyright (C) 2004-2009 Nokia Corporation
*
* Richard Woodruff <r-woodruff2@ti.com>
*
* The OMAP2 processor can be run at several discrete 'PRCM configurations'.
* These configurations are characterized by voltage and speed for clocks.
* The device is only validated for certain combinations. One way to express
* these combinations is via the 'ratios' which the clocks operate with
* respect to each other. These ratio sets are for a given voltage/DPLL
* setting. All configurations can be described by a DPLL setting and a ratio.
*
* XXX Missing voltage data.
* XXX Missing 19.2MHz sys_clk rate sets (needed for N800/N810)
*
* THe format described in this file is deprecated. Once a reasonable
* OPP API exists, the data in this file should be converted to use it.
*
* This is technically part of the OMAP2xxx clock code.
*
* Considerable work is still needed to fully support dynamic frequency
* changes on OMAP2xxx-series chips. Readers interested in such a
* project are encouraged to review the Maemo Diablo RX-34 and RX-44
* kernel source at:
* http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/
*/
#include <plat/hardware.h>
#include "opp2xxx.h"
#include "sdrc.h"
#include "clock.h"
/*
* Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
* CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
* CM_CLKSEL2_PLL, CM_CLKSEL_MDM
*
* Filling in table based on H4 boards available. There are quite a
* few more rate combinations which could be defined.
*
* When multiple values are defined the start up will try and choose
* the fastest one. If a 'fast' value is defined, then automatically,
* the /2 one should be included as it can be used. Generally having
* more than one fast set does not make sense, as static timings need
* to be changed to change the set. The exception is the bypass
* setting which is available for low power bypass.
*
* Note: This table needs to be sorted, fastest to slowest.
**/
const struct prcm_config omap2420_rate_table[] = {
/* PRCM I - FAST */
{S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL,
RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz,
RATE_IN_242X},
/* PRCM II - FAST */
{S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
RATE_IN_242X},
{S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
RATE_IN_242X},
/* PRCM III - FAST */
{S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
RATE_IN_242X},
{S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
RATE_IN_242X},
/* PRCM II - SLOW */
{S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
RATE_IN_242X},
{S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
RATE_IN_242X},
/* PRCM III - SLOW */
{S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
RATE_IN_242X},
{S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
RATE_IN_242X},
/* PRCM-VII (boot-bypass) */
{S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/
RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
RATE_IN_242X},
/* PRCM-VII (boot-bypass) */
{S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */
RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
RATE_IN_242X},
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
};