WSL2-Linux-Kernel/include/asm-sh/uaccess.h

572 строки
14 KiB
C
Исходник Ответственный История

Этот файл содержит невидимые символы Юникода!

Этот файл содержит невидимые символы Юникода, которые могут быть отображены не так, как показано ниже. Если это намеренно, можете спокойно проигнорировать это предупреждение. Используйте кнопку Экранировать, чтобы показать скрытые символы.

/* $Id: uaccess.h,v 1.11 2003/10/13 07:21:20 lethal Exp $
*
* User space memory access functions
*
* Copyright (C) 1999, 2002 Niibe Yutaka
* Copyright (C) 2003 Paul Mundt
*
* Based on:
* MIPS implementation version 1.15 by
* Copyright (C) 1996, 1997, 1998 by Ralf Baechle
* and i386 version.
*/
#ifndef __ASM_SH_UACCESS_H
#define __ASM_SH_UACCESS_H
#include <linux/errno.h>
#include <linux/sched.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
/*
* The fs value determines whether argument validity checking should be
* performed or not. If get_fs() == USER_DS, checking is performed, with
* get_fs() == KERNEL_DS, checking is bypassed.
*
* For historical reasons (Data Segment Register?), these macros are misnamed.
*/
#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL)
#define USER_DS MAKE_MM_SEG(PAGE_OFFSET)
#define segment_eq(a,b) ((a).seg == (b).seg)
#define get_ds() (KERNEL_DS)
#if !defined(CONFIG_MMU)
/* NOMMU is always true */
#define __addr_ok(addr) (1)
static inline mm_segment_t get_fs(void)
{
return USER_DS;
}
static inline void set_fs(mm_segment_t s)
{
}
/*
* __access_ok: Check if address with size is OK or not.
*
* If we don't have an MMU (or if its disabled) the only thing we really have
* to look out for is if the address resides somewhere outside of what
* available RAM we have.
*
* TODO: This check could probably also stand to be restricted somewhat more..
* though it still does the Right Thing(tm) for the time being.
*/
static inline int __access_ok(unsigned long addr, unsigned long size)
{
extern unsigned long memory_start, memory_end;
return ((addr >= memory_start) && ((addr + size) < memory_end));
}
#else /* CONFIG_MMU */
#define __addr_ok(addr) \
((unsigned long)(addr) < (current_thread_info()->addr_limit.seg))
#define get_fs() (current_thread_info()->addr_limit)
#define set_fs(x) (current_thread_info()->addr_limit = (x))
/*
* __access_ok: Check if address with size is OK or not.
*
* We do three checks:
* (1) is it user space?
* (2) addr + size --> carry?
* (3) addr + size >= 0x80000000 (PAGE_OFFSET)
*
* (1) (2) (3) | RESULT
* 0 0 0 | ok
* 0 0 1 | ok
* 0 1 0 | bad
* 0 1 1 | bad
* 1 0 0 | ok
* 1 0 1 | bad
* 1 1 0 | bad
* 1 1 1 | bad
*/
static inline int __access_ok(unsigned long addr, unsigned long size)
{
unsigned long flag, tmp;
__asm__("stc r7_bank, %0\n\t"
"mov.l @(8,%0), %0\n\t"
"clrt\n\t"
"addc %2, %1\n\t"
"and %1, %0\n\t"
"rotcl %0\n\t"
"rotcl %0\n\t"
"and #3, %0"
: "=&z" (flag), "=r" (tmp)
: "r" (addr), "1" (size)
: "t");
return flag == 0;
}
#endif /* CONFIG_MMU */
static inline int access_ok(int type, const void __user *p, unsigned long size)
{
unsigned long addr = (unsigned long)p;
return __access_ok(addr, size);
}
/*
* Uh, these should become the main single-value transfer routines ...
* They automatically use the right size if we just have the right
* pointer type ...
*
* As SuperH uses the same address space for kernel and user data, we
* can just do these as direct assignments.
*
* Careful to not
* (a) re-use the arguments for side effects (sizeof is ok)
* (b) require any knowledge of processes at this stage
*/
#define put_user(x,ptr) __put_user_check((x),(ptr),sizeof(*(ptr)))
#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr)))
/*
* The "__xxx" versions do not do address space checking, useful when
* doing multiple accesses to the same area (the user has to do the
* checks by hand with "access_ok()")
*/
#define __put_user(x,ptr) \
__put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
#define __get_user(x,ptr) \
__get_user_nocheck((x),(ptr),sizeof(*(ptr)))
struct __large_struct { unsigned long buf[100]; };
#define __m(x) (*(struct __large_struct *)(x))
#define __get_user_size(x,ptr,size,retval) \
do { \
retval = 0; \
switch (size) { \
case 1: \
__get_user_asm(x, ptr, retval, "b"); \
break; \
case 2: \
__get_user_asm(x, ptr, retval, "w"); \
break; \
case 4: \
__get_user_asm(x, ptr, retval, "l"); \
break; \
default: \
__get_user_unknown(); \
break; \
} \
} while (0)
#define __get_user_nocheck(x,ptr,size) \
({ \
long __gu_err, __gu_val; \
__get_user_size(__gu_val, (ptr), (size), __gu_err); \
(x) = (__typeof__(*(ptr)))__gu_val; \
__gu_err; \
})
#ifdef CONFIG_MMU
#define __get_user_check(x,ptr,size) \
({ \
long __gu_err, __gu_val; \
switch (size) { \
case 1: \
__get_user_1(__gu_val, (ptr), __gu_err); \
break; \
case 2: \
__get_user_2(__gu_val, (ptr), __gu_err); \
break; \
case 4: \
__get_user_4(__gu_val, (ptr), __gu_err); \
break; \
default: \
__get_user_unknown(); \
break; \
} \
\
(x) = (__typeof__(*(ptr)))__gu_val; \
__gu_err; \
})
#define __get_user_1(x,addr,err) ({ \
__asm__("stc r7_bank, %1\n\t" \
"mov.l @(8,%1), %1\n\t" \
"and %2, %1\n\t" \
"cmp/pz %1\n\t" \
"bt/s 1f\n\t" \
" mov #0, %0\n\t" \
"0:\n" \
"mov #-14, %0\n\t" \
"bra 2f\n\t" \
" mov #0, %1\n" \
"1:\n\t" \
"mov.b @%2, %1\n\t" \
"extu.b %1, %1\n" \
"2:\n" \
".section __ex_table,\"a\"\n\t" \
".long 1b, 0b\n\t" \
".previous" \
: "=&r" (err), "=&r" (x) \
: "r" (addr) \
: "t"); \
})
#define __get_user_2(x,addr,err) ({ \
__asm__("stc r7_bank, %1\n\t" \
"mov.l @(8,%1), %1\n\t" \
"and %2, %1\n\t" \
"cmp/pz %1\n\t" \
"bt/s 1f\n\t" \
" mov #0, %0\n\t" \
"0:\n" \
"mov #-14, %0\n\t" \
"bra 2f\n\t" \
" mov #0, %1\n" \
"1:\n\t" \
"mov.w @%2, %1\n\t" \
"extu.w %1, %1\n" \
"2:\n" \
".section __ex_table,\"a\"\n\t" \
".long 1b, 0b\n\t" \
".previous" \
: "=&r" (err), "=&r" (x) \
: "r" (addr) \
: "t"); \
})
#define __get_user_4(x,addr,err) ({ \
__asm__("stc r7_bank, %1\n\t" \
"mov.l @(8,%1), %1\n\t" \
"and %2, %1\n\t" \
"cmp/pz %1\n\t" \
"bt/s 1f\n\t" \
" mov #0, %0\n\t" \
"0:\n" \
"mov #-14, %0\n\t" \
"bra 2f\n\t" \
" mov #0, %1\n" \
"1:\n\t" \
"mov.l @%2, %1\n\t" \
"2:\n" \
".section __ex_table,\"a\"\n\t" \
".long 1b, 0b\n\t" \
".previous" \
: "=&r" (err), "=&r" (x) \
: "r" (addr) \
: "t"); \
})
#else /* CONFIG_MMU */
#define __get_user_check(x,ptr,size) \
({ \
long __gu_err, __gu_val; \
if (__access_ok((unsigned long)(ptr), (size))) { \
__get_user_size(__gu_val, (ptr), (size), __gu_err); \
(x) = (__typeof__(*(ptr)))__gu_val; \
} else \
__gu_err = -EFAULT; \
__gu_err; \
})
#endif
#define __get_user_asm(x, addr, err, insn) \
({ \
__asm__ __volatile__( \
"1:\n\t" \
"mov." insn " %2, %1\n\t" \
"mov #0, %0\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
"3:\n\t" \
"mov #0, %1\n\t" \
"mov.l 4f, %0\n\t" \
"jmp @%0\n\t" \
" mov %3, %0\n" \
"4: .long 2b\n\t" \
".previous\n" \
".section __ex_table,\"a\"\n\t" \
".long 1b, 3b\n\t" \
".previous" \
:"=&r" (err), "=&r" (x) \
:"m" (__m(addr)), "i" (-EFAULT)); })
extern void __get_user_unknown(void);
#define __put_user_size(x,ptr,size,retval) \
do { \
retval = 0; \
switch (size) { \
case 1: \
__put_user_asm(x, ptr, retval, "b"); \
break; \
case 2: \
__put_user_asm(x, ptr, retval, "w"); \
break; \
case 4: \
__put_user_asm(x, ptr, retval, "l"); \
break; \
case 8: \
__put_user_u64(x, ptr, retval); \
break; \
default: \
__put_user_unknown(); \
} \
} while (0)
#define __put_user_nocheck(x,ptr,size) \
({ \
long __pu_err; \
__put_user_size((x),(ptr),(size),__pu_err); \
__pu_err; \
})
#define __put_user_check(x,ptr,size) \
({ \
long __pu_err = -EFAULT; \
__typeof__(*(ptr)) *__pu_addr = (ptr); \
\
if (__access_ok((unsigned long)__pu_addr,size)) \
__put_user_size((x),__pu_addr,(size),__pu_err); \
__pu_err; \
})
#define __put_user_asm(x, addr, err, insn) \
({ \
__asm__ __volatile__( \
"1:\n\t" \
"mov." insn " %1, %2\n\t" \
"mov #0, %0\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
"3:\n\t" \
"nop\n\t" \
"mov.l 4f, %0\n\t" \
"jmp @%0\n\t" \
"mov %3, %0\n" \
"4: .long 2b\n\t" \
".previous\n" \
".section __ex_table,\"a\"\n\t" \
".long 1b, 3b\n\t" \
".previous" \
:"=&r" (err) \
:"r" (x), "m" (__m(addr)), "i" (-EFAULT) \
:"memory"); })
#if defined(__LITTLE_ENDIAN__)
#define __put_user_u64(val,addr,retval) \
({ \
__asm__ __volatile__( \
"1:\n\t" \
"mov.l %R1,%2\n\t" \
"mov.l %S1,%T2\n\t" \
"mov #0,%0\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
"3:\n\t" \
"nop\n\t" \
"mov.l 4f,%0\n\t" \
"jmp @%0\n\t" \
" mov %3,%0\n" \
"4: .long 2b\n\t" \
".previous\n" \
".section __ex_table,\"a\"\n\t" \
".long 1b, 3b\n\t" \
".previous" \
: "=r" (retval) \
: "r" (val), "m" (__m(addr)), "i" (-EFAULT) \
: "memory"); })
#else
#define __put_user_u64(val,addr,retval) \
({ \
__asm__ __volatile__( \
"1:\n\t" \
"mov.l %S1,%2\n\t" \
"mov.l %R1,%T2\n\t" \
"mov #0,%0\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
"3:\n\t" \
"nop\n\t" \
"mov.l 4f,%0\n\t" \
"jmp @%0\n\t" \
" mov %3,%0\n" \
"4: .long 2b\n\t" \
".previous\n" \
".section __ex_table,\"a\"\n\t" \
".long 1b, 3b\n\t" \
".previous" \
: "=r" (retval) \
: "r" (val), "m" (__m(addr)), "i" (-EFAULT) \
: "memory"); })
#endif
extern void __put_user_unknown(void);
/* Generic arbitrary sized copy. */
/* Return the number of bytes NOT copied */
extern __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
#define copy_to_user(to,from,n) ({ \
void *__copy_to = (void *) (to); \
__kernel_size_t __copy_size = (__kernel_size_t) (n); \
__kernel_size_t __copy_res; \
if(__copy_size && __access_ok((unsigned long)__copy_to, __copy_size)) { \
__copy_res = __copy_user(__copy_to, (void *) (from), __copy_size); \
} else __copy_res = __copy_size; \
__copy_res; })
#define __copy_to_user(to,from,n) \
__copy_user((void *)(to), \
(void *)(from), n)
#define __copy_to_user_inatomic __copy_to_user
#define __copy_from_user_inatomic __copy_from_user
#define copy_from_user(to,from,n) ({ \
void *__copy_to = (void *) (to); \
void *__copy_from = (void *) (from); \
__kernel_size_t __copy_size = (__kernel_size_t) (n); \
__kernel_size_t __copy_res; \
if(__copy_size && __access_ok((unsigned long)__copy_from, __copy_size)) { \
__copy_res = __copy_user(__copy_to, __copy_from, __copy_size); \
} else __copy_res = __copy_size; \
__copy_res; })
#define __copy_from_user(to,from,n) \
__copy_user((void *)(to), \
(void *)(from), n)
/*
* Clear the area and return remaining number of bytes
* (on failure. Usually it's 0.)
*/
extern __kernel_size_t __clear_user(void *addr, __kernel_size_t size);
#define clear_user(addr,n) ({ \
void * __cl_addr = (addr); \
unsigned long __cl_size = (n); \
if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \
__cl_size = __clear_user(__cl_addr, __cl_size); \
__cl_size; })
static __inline__ int
__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count)
{
__kernel_size_t res;
unsigned long __dummy, _d, _s;
__asm__ __volatile__(
"9:\n"
"mov.b @%2+, %1\n\t"
"cmp/eq #0, %1\n\t"
"bt/s 2f\n"
"1:\n"
"mov.b %1, @%3\n\t"
"dt %7\n\t"
"bf/s 9b\n\t"
" add #1, %3\n\t"
"2:\n\t"
"sub %7, %0\n"
"3:\n"
".section .fixup,\"ax\"\n"
"4:\n\t"
"mov.l 5f, %1\n\t"
"jmp @%1\n\t"
" mov %8, %0\n\t"
".balign 4\n"
"5: .long 3b\n"
".previous\n"
".section __ex_table,\"a\"\n"
" .balign 4\n"
" .long 9b,4b\n"
".previous"
: "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d)
: "0" (__count), "2" (__src), "3" (__dest), "r" (__count),
"i" (-EFAULT)
: "memory", "t");
return res;
}
#define strncpy_from_user(dest,src,count) ({ \
unsigned long __sfu_src = (unsigned long) (src); \
int __sfu_count = (int) (count); \
long __sfu_res = -EFAULT; \
if(__access_ok(__sfu_src, __sfu_count)) { \
__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \
} __sfu_res; })
/*
* Return the size of a string (including the ending 0!)
*/
static __inline__ long __strnlen_user(const char __user *__s, long __n)
{
unsigned long res;
unsigned long __dummy;
__asm__ __volatile__(
"9:\n"
"cmp/eq %4, %0\n\t"
"bt 2f\n"
"1:\t"
"mov.b @(%0,%3), %1\n\t"
"tst %1, %1\n\t"
"bf/s 9b\n\t"
" add #1, %0\n"
"2:\n"
".section .fixup,\"ax\"\n"
"3:\n\t"
"mov.l 4f, %1\n\t"
"jmp @%1\n\t"
" mov #0, %0\n"
".balign 4\n"
"4: .long 2b\n"
".previous\n"
".section __ex_table,\"a\"\n"
" .balign 4\n"
" .long 1b,3b\n"
".previous"
: "=z" (res), "=&r" (__dummy)
: "0" (0), "r" (__s), "r" (__n)
: "t");
return res;
}
static __inline__ long strnlen_user(const char __user *s, long n)
{
if (!__addr_ok(s))
return 0;
else
return __strnlen_user(s, n);
}
#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
* the address at which the program should continue. No registers are
* modified, so it is entirely up to the continuation code to figure out
* what to do.
*
* All the routines below use bits of fixup code that are out of line
* with the main instruction path. This means when everything is well,
* we don't even have to jump over them. Further, they do not intrude
* on our cache or tlb entries.
*/
struct exception_table_entry
{
unsigned long insn, fixup;
};
extern int fixup_exception(struct pt_regs *regs);
#endif /* __ASM_SH_UACCESS_H */