WSL2-Linux-Kernel/arch/arm/mach-pxa/tosa.c

339 строки
7.7 KiB
C

/*
* Support for Sharp SL-C6000x PDAs
* Model: (Tosa)
*
* Copyright (c) 2005 Dirk Opfer
*
* Based on code written by Sharp/Lineo for 2.4 kernels
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
#include <linux/mmc/host.h>
#include <linux/pm.h>
#include <linux/delay.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/irda.h>
#include <asm/arch/mmc.h>
#include <asm/arch/udc.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/arch/tosa.h>
#include <asm/hardware/scoop.h>
#include <asm/mach/sharpsl_param.h>
#include "generic.h"
#include "devices.h"
/*
* SCOOP Device
*/
static struct resource tosa_scoop_resources[] = {
[0] = {
.start = TOSA_CF_PHYS,
.end = TOSA_CF_PHYS + 0xfff,
.flags = IORESOURCE_MEM,
},
};
static struct scoop_config tosa_scoop_setup = {
.io_dir = TOSA_SCOOP_IO_DIR,
.io_out = TOSA_SCOOP_IO_OUT,
};
struct platform_device tosascoop_device = {
.name = "sharp-scoop",
.id = 0,
.dev = {
.platform_data = &tosa_scoop_setup,
},
.num_resources = ARRAY_SIZE(tosa_scoop_resources),
.resource = tosa_scoop_resources,
};
/*
* SCOOP Device Jacket
*/
static struct resource tosa_scoop_jc_resources[] = {
[0] = {
.start = TOSA_SCOOP_PHYS + 0x40,
.end = TOSA_SCOOP_PHYS + 0xfff,
.flags = IORESOURCE_MEM,
},
};
static struct scoop_config tosa_scoop_jc_setup = {
.io_dir = TOSA_SCOOP_JC_IO_DIR,
.io_out = TOSA_SCOOP_JC_IO_OUT,
};
struct platform_device tosascoop_jc_device = {
.name = "sharp-scoop",
.id = 1,
.dev = {
.platform_data = &tosa_scoop_jc_setup,
.parent = &tosascoop_device.dev,
},
.num_resources = ARRAY_SIZE(tosa_scoop_jc_resources),
.resource = tosa_scoop_jc_resources,
};
/*
* PCMCIA
*/
static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
{
.dev = &tosascoop_device.dev,
.irq = TOSA_IRQ_GPIO_CF_IRQ,
.cd_irq = TOSA_IRQ_GPIO_CF_CD,
.cd_irq_str = "PCMCIA0 CD",
},{
.dev = &tosascoop_jc_device.dev,
.irq = TOSA_IRQ_GPIO_JC_CF_IRQ,
.cd_irq = -1,
},
};
static void tosa_pcmcia_init(void)
{
/* Setup default state of GPIO outputs
before we enable them as outputs. */
GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
GPIO_bit(GPIO53_nPCE_2);
pxa_gpio_mode(GPIO48_nPOE_MD);
pxa_gpio_mode(GPIO49_nPWE_MD);
pxa_gpio_mode(GPIO50_nPIOR_MD);
pxa_gpio_mode(GPIO51_nPIOW_MD);
pxa_gpio_mode(GPIO55_nPREG_MD);
pxa_gpio_mode(GPIO56_nPWAIT_MD);
pxa_gpio_mode(GPIO57_nIOIS16_MD);
pxa_gpio_mode(GPIO52_nPCE_1_MD);
pxa_gpio_mode(GPIO53_nPCE_2_MD);
pxa_gpio_mode(GPIO54_pSKTSEL_MD);
}
static struct scoop_pcmcia_config tosa_pcmcia_config = {
.devs = &tosa_pcmcia_scoop[0],
.num_devs = 2,
.pcmcia_init = tosa_pcmcia_init,
};
/*
* USB Device Controller
*/
static void tosa_udc_command(int cmd)
{
switch(cmd) {
case PXA2XX_UDC_CMD_CONNECT:
set_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP);
break;
case PXA2XX_UDC_CMD_DISCONNECT:
reset_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP);
break;
}
}
static int tosa_udc_is_connected(void)
{
return ((GPLR(TOSA_GPIO_USB_IN) & GPIO_bit(TOSA_GPIO_USB_IN)) == 0);
}
static struct pxa2xx_udc_mach_info udc_info __initdata = {
.udc_command = tosa_udc_command,
.udc_is_connected = tosa_udc_is_connected,
};
/*
* MMC/SD Device
*/
static struct pxamci_platform_data tosa_mci_platform_data;
static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void *data)
{
int err;
/* setup GPIO for PXA25x MMC controller */
pxa_gpio_mode(GPIO6_MMCCLK_MD);
pxa_gpio_mode(GPIO8_MMCCS0_MD);
pxa_gpio_mode(TOSA_GPIO_nSD_DETECT | GPIO_IN);
tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, IRQF_DISABLED,
"MMC/SD card detect", data);
if (err) {
printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
return -1;
}
set_irq_type(TOSA_IRQ_GPIO_nSD_DETECT, IRQT_BOTHEDGE);
return 0;
}
static void tosa_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
if (( 1 << vdd) & p_d->ocr_mask) {
set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON);
} else {
reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON);
}
}
static int tosa_mci_get_ro(struct device *dev)
{
return (read_scoop_reg(&tosascoop_device.dev, SCOOP_GPWR)&TOSA_SCOOP_SD_WP);
}
static void tosa_mci_exit(struct device *dev, void *data)
{
free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
}
static struct pxamci_platform_data tosa_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = tosa_mci_init,
.get_ro = tosa_mci_get_ro,
.setpower = tosa_mci_setpower,
.exit = tosa_mci_exit,
};
/*
* Irda
*/
static void tosa_irda_transceiver_mode(struct device *dev, int mode)
{
if (mode & IR_OFF) {
reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN);
pxa_gpio_mode(GPIO47_STTXD|GPIO_DFLT_LOW);
pxa_gpio_mode(GPIO47_STTXD|GPIO_OUT);
} else {
pxa_gpio_mode(GPIO47_STTXD_MD);
set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN);
}
}
static struct pxaficp_platform_data tosa_ficp_platform_data = {
.transceiver_cap = IR_SIRMODE | IR_OFF,
.transceiver_mode = tosa_irda_transceiver_mode,
};
/*
* Tosa Keyboard
*/
static struct platform_device tosakbd_device = {
.name = "tosa-keyboard",
.id = -1,
};
/*
* Tosa LEDs
*/
static struct platform_device tosaled_device = {
.name = "tosa-led",
.id = -1,
};
static struct platform_device *devices[] __initdata = {
&tosascoop_device,
&tosascoop_jc_device,
&tosakbd_device,
&tosaled_device,
};
static void tosa_poweroff(void)
{
RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT);
GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET);
mdelay(1000);
arm_machine_restart('h');
}
static void tosa_restart(char mode)
{
/* Bootloader magic for a reboot */
if((MSC0 & 0xffff0000) == 0x7ff00000)
MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
tosa_poweroff();
}
static void __init tosa_init(void)
{
pm_power_off = tosa_poweroff;
arm_pm_restart = tosa_restart;
pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN);
pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN);
pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN);
/* setup sleep mode values */
PWER = 0x00000002;
PFER = 0x00000000;
PRER = 0x00000002;
PGSR0 = 0x00000000;
PGSR1 = 0x00FF0002;
PGSR2 = 0x00014000;
PCFR |= PCFR_OPDE;
/* enable batt_fault */
PMCR = 0x01;
pxa_set_mci_info(&tosa_mci_platform_data);
pxa_set_udc_info(&udc_info);
pxa_set_ficp_info(&tosa_ficp_platform_data);
platform_scoop_config = &tosa_pcmcia_config;
platform_add_devices(devices, ARRAY_SIZE(devices));
}
static void __init fixup_tosa(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
sharpsl_save_param();
mi->nr_banks=1;
mi->bank[0].start = 0xa0000000;
mi->bank[0].node = 0;
mi->bank[0].size = (64*1024*1024);
}
MACHINE_START(TOSA, "SHARP Tosa")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_tosa,
.map_io = pxa_map_io,
.init_irq = pxa25x_init_irq,
.init_machine = tosa_init,
.timer = &pxa_timer,
MACHINE_END