WSL2-Linux-Kernel/drivers/ide/ide-acpi.c

739 строки
19 KiB
C

/*
* ide-acpi.c
* Provides ACPI support for IDE drives.
*
* Copyright (C) 2005 Intel Corp.
* Copyright (C) 2005 Randy Dunlap
* Copyright (C) 2006 SUSE Linux Products GmbH
* Copyright (C) 2006 Hannes Reinecke
*/
#include <linux/ata.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <acpi/acpi.h>
#include <linux/ide.h>
#include <linux/pci.h>
#include <acpi/acpi_bus.h>
#include <acpi/acnames.h>
#include <acpi/acnamesp.h>
#include <acpi/acparser.h>
#include <acpi/acexcep.h>
#include <acpi/acmacros.h>
#include <acpi/actypes.h>
#define REGS_PER_GTF 7
struct taskfile_array {
u8 tfa[REGS_PER_GTF]; /* regs. 0x1f1 - 0x1f7 */
};
struct GTM_buffer {
u32 PIO_speed0;
u32 DMA_speed0;
u32 PIO_speed1;
u32 DMA_speed1;
u32 GTM_flags;
};
struct ide_acpi_drive_link {
ide_drive_t *drive;
acpi_handle obj_handle;
u8 idbuff[512];
};
struct ide_acpi_hwif_link {
ide_hwif_t *hwif;
acpi_handle obj_handle;
struct GTM_buffer gtm;
struct ide_acpi_drive_link master;
struct ide_acpi_drive_link slave;
};
#undef DEBUGGING
/* note: adds function name and KERN_DEBUG */
#ifdef DEBUGGING
#define DEBPRINT(fmt, args...) \
printk(KERN_DEBUG "%s: " fmt, __FUNCTION__, ## args)
#else
#define DEBPRINT(fmt, args...) do {} while (0)
#endif /* DEBUGGING */
extern int ide_noacpi;
extern int ide_noacpitfs;
extern int ide_noacpionboot;
/**
* ide_get_dev_handle - finds acpi_handle and PCI device.function
* @dev: device to locate
* @handle: returned acpi_handle for @dev
* @pcidevfn: return PCI device.func for @dev
*
* Returns the ACPI object handle to the corresponding PCI device.
*
* Returns 0 on success, <0 on error.
*/
static int ide_get_dev_handle(struct device *dev, acpi_handle *handle,
acpi_integer *pcidevfn)
{
struct pci_dev *pdev = to_pci_dev(dev);
unsigned int bus, devnum, func;
acpi_integer addr;
acpi_handle dev_handle;
struct acpi_buffer buffer = {.length = ACPI_ALLOCATE_BUFFER,
.pointer = NULL};
acpi_status status;
struct acpi_device_info *dinfo = NULL;
int ret = -ENODEV;
bus = pdev->bus->number;
devnum = PCI_SLOT(pdev->devfn);
func = PCI_FUNC(pdev->devfn);
/* ACPI _ADR encoding for PCI bus: */
addr = (acpi_integer)(devnum << 16 | func);
DEBPRINT("ENTER: pci %02x:%02x.%01x\n", bus, devnum, func);
dev_handle = DEVICE_ACPI_HANDLE(dev);
if (!dev_handle) {
DEBPRINT("no acpi handle for device\n");
goto err;
}
status = acpi_get_object_info(dev_handle, &buffer);
if (ACPI_FAILURE(status)) {
DEBPRINT("get_object_info for device failed\n");
goto err;
}
dinfo = buffer.pointer;
if (dinfo && (dinfo->valid & ACPI_VALID_ADR) &&
dinfo->address == addr) {
*pcidevfn = addr;
*handle = dev_handle;
} else {
DEBPRINT("get_object_info for device has wrong "
" address: %llu, should be %u\n",
dinfo ? (unsigned long long)dinfo->address : -1ULL,
(unsigned int)addr);
goto err;
}
DEBPRINT("for dev=0x%x.%x, addr=0x%llx, *handle=0x%p\n",
devnum, func, (unsigned long long)addr, *handle);
ret = 0;
err:
kfree(dinfo);
return ret;
}
/**
* ide_acpi_hwif_get_handle - Get ACPI object handle for a given hwif
* @hwif: device to locate
*
* Retrieves the object handle for a given hwif.
*
* Returns handle on success, 0 on error.
*/
static acpi_handle ide_acpi_hwif_get_handle(ide_hwif_t *hwif)
{
struct device *dev = hwif->gendev.parent;
acpi_handle dev_handle;
acpi_integer pcidevfn;
acpi_handle chan_handle;
int err;
DEBPRINT("ENTER: device %s\n", hwif->name);
if (!dev) {
DEBPRINT("no PCI device for %s\n", hwif->name);
return NULL;
}
err = ide_get_dev_handle(dev, &dev_handle, &pcidevfn);
if (err < 0) {
DEBPRINT("ide_get_dev_handle failed (%d)\n", err);
return NULL;
}
/* get child objects of dev_handle == channel objects,
* + _their_ children == drive objects */
/* channel is hwif->channel */
chan_handle = acpi_get_child(dev_handle, hwif->channel);
DEBPRINT("chan adr=%d: handle=0x%p\n",
hwif->channel, chan_handle);
return chan_handle;
}
/**
* ide_acpi_drive_get_handle - Get ACPI object handle for a given drive
* @drive: device to locate
*
* Retrieves the object handle of a given drive. According to the ACPI
* spec the drive is a child of the hwif.
*
* Returns handle on success, 0 on error.
*/
static acpi_handle ide_acpi_drive_get_handle(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
int port;
acpi_handle drive_handle;
if (!hwif->acpidata)
return NULL;
if (!hwif->acpidata->obj_handle)
return NULL;
port = hwif->channel ? drive->dn - 2: drive->dn;
DEBPRINT("ENTER: %s at channel#: %d port#: %d\n",
drive->name, hwif->channel, port);
/* TBD: could also check ACPI object VALID bits */
drive_handle = acpi_get_child(hwif->acpidata->obj_handle, port);
DEBPRINT("drive %s handle 0x%p\n", drive->name, drive_handle);
return drive_handle;
}
/**
* do_drive_get_GTF - get the drive bootup default taskfile settings
* @drive: the drive for which the taskfile settings should be retrieved
* @gtf_length: number of bytes of _GTF data returned at @gtf_address
* @gtf_address: buffer containing _GTF taskfile arrays
*
* The _GTF method has no input parameters.
* It returns a variable number of register set values (registers
* hex 1F1..1F7, taskfiles).
* The <variable number> is not known in advance, so have ACPI-CA
* allocate the buffer as needed and return it, then free it later.
*
* The returned @gtf_length and @gtf_address are only valid if the
* function return value is 0.
*/
static int do_drive_get_GTF(ide_drive_t *drive,
unsigned int *gtf_length, unsigned long *gtf_address,
unsigned long *obj_loc)
{
acpi_status status;
struct acpi_buffer output;
union acpi_object *out_obj;
ide_hwif_t *hwif = HWIF(drive);
struct device *dev = hwif->gendev.parent;
int err = -ENODEV;
int port;
*gtf_length = 0;
*gtf_address = 0UL;
*obj_loc = 0UL;
if (ide_noacpi)
return 0;
if (!dev) {
DEBPRINT("no PCI device for %s\n", hwif->name);
goto out;
}
if (!hwif->acpidata) {
DEBPRINT("no ACPI data for %s\n", hwif->name);
goto out;
}
port = hwif->channel ? drive->dn - 2: drive->dn;
if (!drive->acpidata) {
if (port == 0) {
drive->acpidata = &hwif->acpidata->master;
hwif->acpidata->master.drive = drive;
} else {
drive->acpidata = &hwif->acpidata->slave;
hwif->acpidata->slave.drive = drive;
}
}
DEBPRINT("ENTER: %s at %s, port#: %d, hard_port#: %d\n",
hwif->name, dev->bus_id, port, hwif->channel);
if (!drive->present) {
DEBPRINT("%s drive %d:%d not present\n",
hwif->name, hwif->channel, port);
goto out;
}
/* Get this drive's _ADR info. if not already known. */
if (!drive->acpidata->obj_handle) {
drive->acpidata->obj_handle = ide_acpi_drive_get_handle(drive);
if (!drive->acpidata->obj_handle) {
DEBPRINT("No ACPI object found for %s\n",
drive->name);
goto out;
}
}
/* Setting up output buffer */
output.length = ACPI_ALLOCATE_BUFFER;
output.pointer = NULL; /* ACPI-CA sets this; save/free it later */
/* _GTF has no input parameters */
err = -EIO;
status = acpi_evaluate_object(drive->acpidata->obj_handle, "_GTF",
NULL, &output);
if (ACPI_FAILURE(status)) {
printk(KERN_DEBUG
"%s: Run _GTF error: status = 0x%x\n",
__FUNCTION__, status);
goto out;
}
if (!output.length || !output.pointer) {
DEBPRINT("Run _GTF: "
"length or ptr is NULL (0x%llx, 0x%p)\n",
(unsigned long long)output.length,
output.pointer);
goto out;
}
out_obj = output.pointer;
if (out_obj->type != ACPI_TYPE_BUFFER) {
DEBPRINT("Run _GTF: error: "
"expected object type of ACPI_TYPE_BUFFER, "
"got 0x%x\n", out_obj->type);
err = -ENOENT;
kfree(output.pointer);
goto out;
}
if (!out_obj->buffer.length || !out_obj->buffer.pointer ||
out_obj->buffer.length % REGS_PER_GTF) {
printk(KERN_ERR
"%s: unexpected GTF length (%d) or addr (0x%p)\n",
__FUNCTION__, out_obj->buffer.length,
out_obj->buffer.pointer);
err = -ENOENT;
kfree(output.pointer);
goto out;
}
*gtf_length = out_obj->buffer.length;
*gtf_address = (unsigned long)out_obj->buffer.pointer;
*obj_loc = (unsigned long)out_obj;
DEBPRINT("returning gtf_length=%d, gtf_address=0x%lx, obj_loc=0x%lx\n",
*gtf_length, *gtf_address, *obj_loc);
err = 0;
out:
return err;
}
/**
* taskfile_load_raw - send taskfile registers to drive
* @drive: drive to which output is sent
* @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7)
*
* Outputs IDE taskfile to the drive.
*/
static int taskfile_load_raw(ide_drive_t *drive,
const struct taskfile_array *gtf)
{
ide_task_t args;
int err = 0;
DEBPRINT("(0x1f1-1f7): hex: "
"%02x %02x %02x %02x %02x %02x %02x\n",
gtf->tfa[0], gtf->tfa[1], gtf->tfa[2],
gtf->tfa[3], gtf->tfa[4], gtf->tfa[5], gtf->tfa[6]);
memset(&args, 0, sizeof(ide_task_t));
args.command_type = IDE_DRIVE_TASK_NO_DATA;
args.data_phase = TASKFILE_NO_DATA;
args.handler = &task_no_data_intr;
/* convert gtf to IDE Taskfile */
args.tfRegister[1] = gtf->tfa[0]; /* 0x1f1 */
args.tfRegister[2] = gtf->tfa[1]; /* 0x1f2 */
args.tfRegister[3] = gtf->tfa[2]; /* 0x1f3 */
args.tfRegister[4] = gtf->tfa[3]; /* 0x1f4 */
args.tfRegister[5] = gtf->tfa[4]; /* 0x1f5 */
args.tfRegister[6] = gtf->tfa[5]; /* 0x1f6 */
args.tfRegister[7] = gtf->tfa[6]; /* 0x1f7 */
if (ide_noacpitfs) {
DEBPRINT("_GTF execution disabled\n");
return err;
}
err = ide_raw_taskfile(drive, &args, NULL);
if (err)
printk(KERN_ERR "%s: ide_raw_taskfile failed: %u\n",
__FUNCTION__, err);
return err;
}
/**
* do_drive_set_taskfiles - write the drive taskfile settings from _GTF
* @drive: the drive to which the taskfile command should be sent
* @gtf_length: total number of bytes of _GTF taskfiles
* @gtf_address: location of _GTF taskfile arrays
*
* Write {gtf_address, length gtf_length} in groups of
* REGS_PER_GTF bytes.
*/
static int do_drive_set_taskfiles(ide_drive_t *drive,
unsigned int gtf_length,
unsigned long gtf_address)
{
int rc = -ENODEV, err;
int gtf_count = gtf_length / REGS_PER_GTF;
int ix;
struct taskfile_array *gtf;
if (ide_noacpi)
return 0;
DEBPRINT("ENTER: %s, hard_port#: %d\n", drive->name, drive->dn);
if (!drive->present)
goto out;
if (!gtf_count) /* shouldn't be here */
goto out;
DEBPRINT("total GTF bytes=%u (0x%x), gtf_count=%d, addr=0x%lx\n",
gtf_length, gtf_length, gtf_count, gtf_address);
if (gtf_length % REGS_PER_GTF) {
printk(KERN_ERR "%s: unexpected GTF length (%d)\n",
__FUNCTION__, gtf_length);
goto out;
}
rc = 0;
for (ix = 0; ix < gtf_count; ix++) {
gtf = (struct taskfile_array *)
(gtf_address + ix * REGS_PER_GTF);
/* send all TaskFile registers (0x1f1-0x1f7) *in*that*order* */
err = taskfile_load_raw(drive, gtf);
if (err)
rc = err;
}
out:
return rc;
}
/**
* ide_acpi_exec_tfs - get then write drive taskfile settings
* @drive: the drive for which the taskfile settings should be
* written.
*
* According to the ACPI spec this should be called after _STM
* has been evaluated for the interface. Some ACPI vendors interpret
* that as a hard requirement and modify the taskfile according
* to the Identify Drive information passed down with _STM.
* So one should really make sure to call this only after _STM has
* been executed.
*/
int ide_acpi_exec_tfs(ide_drive_t *drive)
{
int ret;
unsigned int gtf_length;
unsigned long gtf_address;
unsigned long obj_loc;
if (ide_noacpi)
return 0;
DEBPRINT("call get_GTF, drive=%s port=%d\n", drive->name, drive->dn);
ret = do_drive_get_GTF(drive, &gtf_length, &gtf_address, &obj_loc);
if (ret < 0) {
DEBPRINT("get_GTF error (%d)\n", ret);
return ret;
}
DEBPRINT("call set_taskfiles, drive=%s\n", drive->name);
ret = do_drive_set_taskfiles(drive, gtf_length, gtf_address);
kfree((void *)obj_loc);
if (ret < 0) {
DEBPRINT("set_taskfiles error (%d)\n", ret);
}
DEBPRINT("ret=%d\n", ret);
return ret;
}
EXPORT_SYMBOL_GPL(ide_acpi_exec_tfs);
/**
* ide_acpi_get_timing - get the channel (controller) timings
* @hwif: target IDE interface (channel)
*
* This function executes the _GTM ACPI method for the target channel.
*
*/
void ide_acpi_get_timing(ide_hwif_t *hwif)
{
acpi_status status;
struct acpi_buffer output;
union acpi_object *out_obj;
if (ide_noacpi)
return;
DEBPRINT("ENTER:\n");
if (!hwif->acpidata) {
DEBPRINT("no ACPI data for %s\n", hwif->name);
return;
}
/* Setting up output buffer for _GTM */
output.length = ACPI_ALLOCATE_BUFFER;
output.pointer = NULL; /* ACPI-CA sets this; save/free it later */
/* _GTM has no input parameters */
status = acpi_evaluate_object(hwif->acpidata->obj_handle, "_GTM",
NULL, &output);
DEBPRINT("_GTM status: %d, outptr: 0x%p, outlen: 0x%llx\n",
status, output.pointer,
(unsigned long long)output.length);
if (ACPI_FAILURE(status)) {
DEBPRINT("Run _GTM error: status = 0x%x\n", status);
return;
}
if (!output.length || !output.pointer) {
DEBPRINT("Run _GTM: length or ptr is NULL (0x%llx, 0x%p)\n",
(unsigned long long)output.length,
output.pointer);
kfree(output.pointer);
return;
}
out_obj = output.pointer;
if (out_obj->type != ACPI_TYPE_BUFFER) {
kfree(output.pointer);
DEBPRINT("Run _GTM: error: "
"expected object type of ACPI_TYPE_BUFFER, "
"got 0x%x\n", out_obj->type);
return;
}
if (!out_obj->buffer.length || !out_obj->buffer.pointer ||
out_obj->buffer.length != sizeof(struct GTM_buffer)) {
kfree(output.pointer);
printk(KERN_ERR
"%s: unexpected _GTM length (0x%x)[should be 0x%zx] or "
"addr (0x%p)\n",
__FUNCTION__, out_obj->buffer.length,
sizeof(struct GTM_buffer), out_obj->buffer.pointer);
return;
}
memcpy(&hwif->acpidata->gtm, out_obj->buffer.pointer,
sizeof(struct GTM_buffer));
DEBPRINT("_GTM info: ptr: 0x%p, len: 0x%x, exp.len: 0x%Zx\n",
out_obj->buffer.pointer, out_obj->buffer.length,
sizeof(struct GTM_buffer));
DEBPRINT("_GTM fields: 0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
hwif->acpidata->gtm.PIO_speed0,
hwif->acpidata->gtm.DMA_speed0,
hwif->acpidata->gtm.PIO_speed1,
hwif->acpidata->gtm.DMA_speed1,
hwif->acpidata->gtm.GTM_flags);
kfree(output.pointer);
}
EXPORT_SYMBOL_GPL(ide_acpi_get_timing);
/**
* ide_acpi_push_timing - set the channel (controller) timings
* @hwif: target IDE interface (channel)
*
* This function executes the _STM ACPI method for the target channel.
*
* _STM requires Identify Drive data, which has to passed as an argument.
* Unfortunately hd_driveid is a mangled version which we can't readily
* use; hence we'll get the information afresh.
*/
void ide_acpi_push_timing(ide_hwif_t *hwif)
{
acpi_status status;
struct acpi_object_list input;
union acpi_object in_params[3];
struct ide_acpi_drive_link *master = &hwif->acpidata->master;
struct ide_acpi_drive_link *slave = &hwif->acpidata->slave;
if (ide_noacpi)
return;
DEBPRINT("ENTER:\n");
if (!hwif->acpidata) {
DEBPRINT("no ACPI data for %s\n", hwif->name);
return;
}
/* Give the GTM buffer + drive Identify data to the channel via the
* _STM method: */
/* setup input parameters buffer for _STM */
input.count = 3;
input.pointer = in_params;
in_params[0].type = ACPI_TYPE_BUFFER;
in_params[0].buffer.length = sizeof(struct GTM_buffer);
in_params[0].buffer.pointer = (u8 *)&hwif->acpidata->gtm;
in_params[1].type = ACPI_TYPE_BUFFER;
in_params[1].buffer.length = sizeof(struct hd_driveid);
in_params[1].buffer.pointer = (u8 *)&master->idbuff;
in_params[2].type = ACPI_TYPE_BUFFER;
in_params[2].buffer.length = sizeof(struct hd_driveid);
in_params[2].buffer.pointer = (u8 *)&slave->idbuff;
/* Output buffer: _STM has no output */
status = acpi_evaluate_object(hwif->acpidata->obj_handle, "_STM",
&input, NULL);
if (ACPI_FAILURE(status)) {
DEBPRINT("Run _STM error: status = 0x%x\n", status);
}
DEBPRINT("_STM status: %d\n", status);
}
EXPORT_SYMBOL_GPL(ide_acpi_push_timing);
/**
* ide_acpi_set_state - set the channel power state
* @hwif: target IDE interface
* @on: state, on/off
*
* This function executes the _PS0/_PS3 ACPI method to set the power state.
* ACPI spec requires _PS0 when IDE power on and _PS3 when power off
*/
void ide_acpi_set_state(ide_hwif_t *hwif, int on)
{
int unit;
if (ide_noacpi)
return;
DEBPRINT("ENTER:\n");
if (!hwif->acpidata) {
DEBPRINT("no ACPI data for %s\n", hwif->name);
return;
}
/* channel first and then drives for power on and verse versa for power off */
if (on)
acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D0);
for (unit = 0; unit < MAX_DRIVES; ++unit) {
ide_drive_t *drive = &hwif->drives[unit];
if (!drive->acpidata->obj_handle)
drive->acpidata->obj_handle = ide_acpi_drive_get_handle(drive);
if (drive->acpidata->obj_handle && drive->present) {
acpi_bus_set_power(drive->acpidata->obj_handle,
on? ACPI_STATE_D0: ACPI_STATE_D3);
}
}
if (!on)
acpi_bus_set_power(hwif->acpidata->obj_handle, ACPI_STATE_D3);
}
/**
* ide_acpi_init - initialize the ACPI link for an IDE interface
* @hwif: target IDE interface (channel)
*
* The ACPI spec is not quite clear when the drive identify buffer
* should be obtained. Calling IDENTIFY DEVICE during shutdown
* is not the best of ideas as the drive might already being put to
* sleep. And obviously we can't call it during resume.
* So we get the information during startup; but this means that
* any changes during run-time will be lost after resume.
*/
void ide_acpi_init(ide_hwif_t *hwif)
{
int unit;
int err;
struct ide_acpi_drive_link *master;
struct ide_acpi_drive_link *slave;
hwif->acpidata = kzalloc(sizeof(struct ide_acpi_hwif_link), GFP_KERNEL);
if (!hwif->acpidata)
return;
hwif->acpidata->obj_handle = ide_acpi_hwif_get_handle(hwif);
if (!hwif->acpidata->obj_handle) {
DEBPRINT("no ACPI object for %s found\n", hwif->name);
kfree(hwif->acpidata);
hwif->acpidata = NULL;
return;
}
/*
* The ACPI spec mandates that we send information
* for both drives, regardless whether they are connected
* or not.
*/
hwif->acpidata->master.drive = &hwif->drives[0];
hwif->drives[0].acpidata = &hwif->acpidata->master;
master = &hwif->acpidata->master;
hwif->acpidata->slave.drive = &hwif->drives[1];
hwif->drives[1].acpidata = &hwif->acpidata->slave;
slave = &hwif->acpidata->slave;
/*
* Send IDENTIFY for each drive
*/
if (master->drive->present) {
err = taskfile_lib_get_identify(master->drive, master->idbuff);
if (err) {
DEBPRINT("identify device %s failed (%d)\n",
master->drive->name, err);
}
}
if (slave->drive->present) {
err = taskfile_lib_get_identify(slave->drive, slave->idbuff);
if (err) {
DEBPRINT("identify device %s failed (%d)\n",
slave->drive->name, err);
}
}
if (ide_noacpionboot) {
DEBPRINT("ACPI methods disabled on boot\n");
return;
}
/* ACPI _PS0 before _STM */
ide_acpi_set_state(hwif, 1);
/*
* ACPI requires us to call _STM on startup
*/
ide_acpi_get_timing(hwif);
ide_acpi_push_timing(hwif);
for (unit = 0; unit < MAX_DRIVES; ++unit) {
ide_drive_t *drive = &hwif->drives[unit];
if (drive->present) {
/* Execute ACPI startup code */
ide_acpi_exec_tfs(drive);
}
}
}
EXPORT_SYMBOL_GPL(ide_acpi_init);