292 строки
7.4 KiB
C
292 строки
7.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
// Copyright (C) 2013,2018,2020-2021 Intel Corporation
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/io.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/types.h>
|
|
|
|
#include "internal.h"
|
|
|
|
#define DMA_CTL_CH(x) (0x1000 + (x) * 4)
|
|
#define DMA_SRC_ADDR_FILLIN(x) (0x1100 + (x) * 4)
|
|
#define DMA_DST_ADDR_FILLIN(x) (0x1200 + (x) * 4)
|
|
#define DMA_XBAR_SEL(x) (0x1300 + (x) * 4)
|
|
#define DMA_REGACCESS_CHID_CFG (0x1400)
|
|
|
|
#define CTL_CH_TRANSFER_MODE_MASK GENMASK(1, 0)
|
|
#define CTL_CH_TRANSFER_MODE_S2S 0
|
|
#define CTL_CH_TRANSFER_MODE_S2D 1
|
|
#define CTL_CH_TRANSFER_MODE_D2S 2
|
|
#define CTL_CH_TRANSFER_MODE_D2D 3
|
|
#define CTL_CH_RD_RS_MASK GENMASK(4, 3)
|
|
#define CTL_CH_WR_RS_MASK GENMASK(6, 5)
|
|
#define CTL_CH_RD_NON_SNOOP_BIT BIT(8)
|
|
#define CTL_CH_WR_NON_SNOOP_BIT BIT(9)
|
|
|
|
#define XBAR_SEL_DEVID_MASK GENMASK(15, 0)
|
|
#define XBAR_SEL_RX_TX_BIT BIT(16)
|
|
#define XBAR_SEL_RX_TX_SHIFT 16
|
|
|
|
#define REGACCESS_CHID_MASK GENMASK(2, 0)
|
|
|
|
static unsigned int idma32_get_slave_devfn(struct dw_dma_chan *dwc)
|
|
{
|
|
struct device *slave = dwc->chan.slave;
|
|
|
|
if (!slave || !dev_is_pci(slave))
|
|
return 0;
|
|
|
|
return to_pci_dev(slave)->devfn;
|
|
}
|
|
|
|
static void idma32_initialize_chan_xbar(struct dw_dma_chan *dwc)
|
|
{
|
|
struct dw_dma *dw = to_dw_dma(dwc->chan.device);
|
|
void __iomem *misc = __dw_regs(dw);
|
|
u32 cfghi = 0, cfglo = 0;
|
|
u8 dst_id, src_id;
|
|
u32 value;
|
|
|
|
/* DMA Channel ID Configuration register must be programmed first */
|
|
value = readl(misc + DMA_REGACCESS_CHID_CFG);
|
|
|
|
value &= ~REGACCESS_CHID_MASK;
|
|
value |= dwc->chan.chan_id;
|
|
|
|
writel(value, misc + DMA_REGACCESS_CHID_CFG);
|
|
|
|
/* Configure channel attributes */
|
|
value = readl(misc + DMA_CTL_CH(dwc->chan.chan_id));
|
|
|
|
value &= ~(CTL_CH_RD_NON_SNOOP_BIT | CTL_CH_WR_NON_SNOOP_BIT);
|
|
value &= ~(CTL_CH_RD_RS_MASK | CTL_CH_WR_RS_MASK);
|
|
value &= ~CTL_CH_TRANSFER_MODE_MASK;
|
|
|
|
switch (dwc->direction) {
|
|
case DMA_MEM_TO_DEV:
|
|
value |= CTL_CH_TRANSFER_MODE_D2S;
|
|
value |= CTL_CH_WR_NON_SNOOP_BIT;
|
|
break;
|
|
case DMA_DEV_TO_MEM:
|
|
value |= CTL_CH_TRANSFER_MODE_S2D;
|
|
value |= CTL_CH_RD_NON_SNOOP_BIT;
|
|
break;
|
|
default:
|
|
/*
|
|
* Memory-to-Memory and Device-to-Device are ignored for now.
|
|
*
|
|
* For Memory-to-Memory transfers we would need to set mode
|
|
* and disable snooping on both sides.
|
|
*/
|
|
return;
|
|
}
|
|
|
|
writel(value, misc + DMA_CTL_CH(dwc->chan.chan_id));
|
|
|
|
/* Configure crossbar selection */
|
|
value = readl(misc + DMA_XBAR_SEL(dwc->chan.chan_id));
|
|
|
|
/* DEVFN selection */
|
|
value &= ~XBAR_SEL_DEVID_MASK;
|
|
value |= idma32_get_slave_devfn(dwc);
|
|
|
|
switch (dwc->direction) {
|
|
case DMA_MEM_TO_DEV:
|
|
value |= XBAR_SEL_RX_TX_BIT;
|
|
break;
|
|
case DMA_DEV_TO_MEM:
|
|
value &= ~XBAR_SEL_RX_TX_BIT;
|
|
break;
|
|
default:
|
|
/* Memory-to-Memory and Device-to-Device are ignored for now */
|
|
return;
|
|
}
|
|
|
|
writel(value, misc + DMA_XBAR_SEL(dwc->chan.chan_id));
|
|
|
|
/* Configure DMA channel low and high registers */
|
|
switch (dwc->direction) {
|
|
case DMA_MEM_TO_DEV:
|
|
dst_id = dwc->chan.chan_id;
|
|
src_id = dwc->dws.src_id;
|
|
break;
|
|
case DMA_DEV_TO_MEM:
|
|
dst_id = dwc->dws.dst_id;
|
|
src_id = dwc->chan.chan_id;
|
|
break;
|
|
default:
|
|
/* Memory-to-Memory and Device-to-Device are ignored for now */
|
|
return;
|
|
}
|
|
|
|
/* Set default burst alignment */
|
|
cfglo |= IDMA32C_CFGL_DST_BURST_ALIGN | IDMA32C_CFGL_SRC_BURST_ALIGN;
|
|
|
|
/* Low 4 bits of the request lines */
|
|
cfghi |= IDMA32C_CFGH_DST_PER(dst_id & 0xf);
|
|
cfghi |= IDMA32C_CFGH_SRC_PER(src_id & 0xf);
|
|
|
|
/* Request line extension (2 bits) */
|
|
cfghi |= IDMA32C_CFGH_DST_PER_EXT(dst_id >> 4 & 0x3);
|
|
cfghi |= IDMA32C_CFGH_SRC_PER_EXT(src_id >> 4 & 0x3);
|
|
|
|
channel_writel(dwc, CFG_LO, cfglo);
|
|
channel_writel(dwc, CFG_HI, cfghi);
|
|
}
|
|
|
|
static void idma32_initialize_chan_generic(struct dw_dma_chan *dwc)
|
|
{
|
|
u32 cfghi = 0;
|
|
u32 cfglo = 0;
|
|
|
|
/* Set default burst alignment */
|
|
cfglo |= IDMA32C_CFGL_DST_BURST_ALIGN | IDMA32C_CFGL_SRC_BURST_ALIGN;
|
|
|
|
/* Low 4 bits of the request lines */
|
|
cfghi |= IDMA32C_CFGH_DST_PER(dwc->dws.dst_id & 0xf);
|
|
cfghi |= IDMA32C_CFGH_SRC_PER(dwc->dws.src_id & 0xf);
|
|
|
|
/* Request line extension (2 bits) */
|
|
cfghi |= IDMA32C_CFGH_DST_PER_EXT(dwc->dws.dst_id >> 4 & 0x3);
|
|
cfghi |= IDMA32C_CFGH_SRC_PER_EXT(dwc->dws.src_id >> 4 & 0x3);
|
|
|
|
channel_writel(dwc, CFG_LO, cfglo);
|
|
channel_writel(dwc, CFG_HI, cfghi);
|
|
}
|
|
|
|
static void idma32_suspend_chan(struct dw_dma_chan *dwc, bool drain)
|
|
{
|
|
u32 cfglo = channel_readl(dwc, CFG_LO);
|
|
|
|
if (drain)
|
|
cfglo |= IDMA32C_CFGL_CH_DRAIN;
|
|
|
|
channel_writel(dwc, CFG_LO, cfglo | DWC_CFGL_CH_SUSP);
|
|
}
|
|
|
|
static void idma32_resume_chan(struct dw_dma_chan *dwc, bool drain)
|
|
{
|
|
u32 cfglo = channel_readl(dwc, CFG_LO);
|
|
|
|
if (drain)
|
|
cfglo &= ~IDMA32C_CFGL_CH_DRAIN;
|
|
|
|
channel_writel(dwc, CFG_LO, cfglo & ~DWC_CFGL_CH_SUSP);
|
|
}
|
|
|
|
static u32 idma32_bytes2block(struct dw_dma_chan *dwc,
|
|
size_t bytes, unsigned int width, size_t *len)
|
|
{
|
|
u32 block;
|
|
|
|
if (bytes > dwc->block_size) {
|
|
block = dwc->block_size;
|
|
*len = dwc->block_size;
|
|
} else {
|
|
block = bytes;
|
|
*len = bytes;
|
|
}
|
|
|
|
return block;
|
|
}
|
|
|
|
static size_t idma32_block2bytes(struct dw_dma_chan *dwc, u32 block, u32 width)
|
|
{
|
|
return IDMA32C_CTLH_BLOCK_TS(block);
|
|
}
|
|
|
|
static u32 idma32_prepare_ctllo(struct dw_dma_chan *dwc)
|
|
{
|
|
struct dma_slave_config *sconfig = &dwc->dma_sconfig;
|
|
u8 smsize = (dwc->direction == DMA_DEV_TO_MEM) ? sconfig->src_maxburst : 0;
|
|
u8 dmsize = (dwc->direction == DMA_MEM_TO_DEV) ? sconfig->dst_maxburst : 0;
|
|
|
|
return DWC_CTLL_LLP_D_EN | DWC_CTLL_LLP_S_EN |
|
|
DWC_CTLL_DST_MSIZE(dmsize) | DWC_CTLL_SRC_MSIZE(smsize);
|
|
}
|
|
|
|
static void idma32_encode_maxburst(struct dw_dma_chan *dwc, u32 *maxburst)
|
|
{
|
|
*maxburst = *maxburst > 1 ? fls(*maxburst) - 1 : 0;
|
|
}
|
|
|
|
static void idma32_set_device_name(struct dw_dma *dw, int id)
|
|
{
|
|
snprintf(dw->name, sizeof(dw->name), "idma32:dmac%d", id);
|
|
}
|
|
|
|
/*
|
|
* Program FIFO size of channels.
|
|
*
|
|
* By default full FIFO (512 bytes) is assigned to channel 0. Here we
|
|
* slice FIFO on equal parts between channels.
|
|
*/
|
|
static void idma32_fifo_partition(struct dw_dma *dw)
|
|
{
|
|
u64 value = IDMA32C_FP_PSIZE_CH0(64) | IDMA32C_FP_PSIZE_CH1(64) |
|
|
IDMA32C_FP_UPDATE;
|
|
u64 fifo_partition = 0;
|
|
|
|
/* Fill FIFO_PARTITION low bits (Channels 0..1, 4..5) */
|
|
fifo_partition |= value << 0;
|
|
|
|
/* Fill FIFO_PARTITION high bits (Channels 2..3, 6..7) */
|
|
fifo_partition |= value << 32;
|
|
|
|
/* Program FIFO Partition registers - 64 bytes per channel */
|
|
idma32_writeq(dw, FIFO_PARTITION1, fifo_partition);
|
|
idma32_writeq(dw, FIFO_PARTITION0, fifo_partition);
|
|
}
|
|
|
|
static void idma32_disable(struct dw_dma *dw)
|
|
{
|
|
do_dw_dma_off(dw);
|
|
idma32_fifo_partition(dw);
|
|
}
|
|
|
|
static void idma32_enable(struct dw_dma *dw)
|
|
{
|
|
idma32_fifo_partition(dw);
|
|
do_dw_dma_on(dw);
|
|
}
|
|
|
|
int idma32_dma_probe(struct dw_dma_chip *chip)
|
|
{
|
|
struct dw_dma *dw;
|
|
|
|
dw = devm_kzalloc(chip->dev, sizeof(*dw), GFP_KERNEL);
|
|
if (!dw)
|
|
return -ENOMEM;
|
|
|
|
/* Channel operations */
|
|
if (chip->pdata->quirks & DW_DMA_QUIRK_XBAR_PRESENT)
|
|
dw->initialize_chan = idma32_initialize_chan_xbar;
|
|
else
|
|
dw->initialize_chan = idma32_initialize_chan_generic;
|
|
dw->suspend_chan = idma32_suspend_chan;
|
|
dw->resume_chan = idma32_resume_chan;
|
|
dw->prepare_ctllo = idma32_prepare_ctllo;
|
|
dw->encode_maxburst = idma32_encode_maxburst;
|
|
dw->bytes2block = idma32_bytes2block;
|
|
dw->block2bytes = idma32_block2bytes;
|
|
|
|
/* Device operations */
|
|
dw->set_device_name = idma32_set_device_name;
|
|
dw->disable = idma32_disable;
|
|
dw->enable = idma32_enable;
|
|
|
|
chip->dw = dw;
|
|
return do_dma_probe(chip);
|
|
}
|
|
EXPORT_SYMBOL_GPL(idma32_dma_probe);
|
|
|
|
int idma32_dma_remove(struct dw_dma_chip *chip)
|
|
{
|
|
return do_dma_remove(chip);
|
|
}
|
|
EXPORT_SYMBOL_GPL(idma32_dma_remove);
|