WSL2-Linux-Kernel/arch/arm/boot/dts/omap3-sbc-t3517.dts

76 строки
1.6 KiB
Plaintext

/*
* Suppport for CompuLab SBC-T3517 with CM-T3517
*/
#include "omap3-cm-t3517.dts"
#include "omap3-sb-t35.dtsi"
/ {
model = "CompuLab SBC-T3517 with CM-T3517";
compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
aliases {
display0 = &dvi0;
display1 = &tv0;
};
/* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
vddvario: regulator-vddvario-sb-t35 {
compatible = "regulator-fixed";
regulator-name = "vddvario";
regulator-always-on;
};
vdd33a: regulator-vdd33a-sb-t35 {
compatible = "regulator-fixed";
regulator-name = "vdd33a";
regulator-always-on;
};
};
&omap3_pmx_core {
pinctrl-names = "default";
pinctrl-0 = <
&sb_t35_usb_hub_pins
&usb_hub_pins
>;
mmc1_aux_pins: pinmux_mmc1_aux_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20c0, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_clk.gpio_59 */
OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE4) /* uart2_cts.gpio_144 */
>;
};
sb_t35_usb_hub_pins: pinmux_sb_t35_usb_hub_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21ec, PIN_OUTPUT | MUX_MODE4) /* ccdc_wen.gpio_98 - SB-T35 USB HUB RST */
>;
};
};
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <
&mmc1_pins
&mmc1_aux_pins
>;
wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59 */
cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
};
&dss {
port {
dpi_out: endpoint {
remote-endpoint = <&tfp410_in>;
data-lines = <24>;
};
};
};
&gpmc {
ranges = <4 0 0x2d000000 0x01000000>, /* SB-T35 SMSC9x Eth */
<0 0 0x00000000 0x01000000>; /* CM-T3x NAND */
};