452 строки
11 KiB
C
452 строки
11 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* I2C driver for the Renesas EMEV2 SoC
|
|
*
|
|
* Copyright (C) 2015 Wolfram Sang <wsa@sang-engineering.com>
|
|
* Copyright 2013 Codethink Ltd.
|
|
* Copyright 2010-2015 Renesas Electronics Corporation
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/device.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/sched.h>
|
|
|
|
/* I2C Registers */
|
|
#define I2C_OFS_IICACT0 0x00 /* start */
|
|
#define I2C_OFS_IIC0 0x04 /* shift */
|
|
#define I2C_OFS_IICC0 0x08 /* control */
|
|
#define I2C_OFS_SVA0 0x0c /* slave address */
|
|
#define I2C_OFS_IICCL0 0x10 /* clock select */
|
|
#define I2C_OFS_IICX0 0x14 /* extension */
|
|
#define I2C_OFS_IICS0 0x18 /* status */
|
|
#define I2C_OFS_IICSE0 0x1c /* status For emulation */
|
|
#define I2C_OFS_IICF0 0x20 /* IIC flag */
|
|
|
|
/* I2C IICACT0 Masks */
|
|
#define I2C_BIT_IICE0 0x0001
|
|
|
|
/* I2C IICC0 Masks */
|
|
#define I2C_BIT_LREL0 0x0040
|
|
#define I2C_BIT_WREL0 0x0020
|
|
#define I2C_BIT_SPIE0 0x0010
|
|
#define I2C_BIT_WTIM0 0x0008
|
|
#define I2C_BIT_ACKE0 0x0004
|
|
#define I2C_BIT_STT0 0x0002
|
|
#define I2C_BIT_SPT0 0x0001
|
|
|
|
/* I2C IICCL0 Masks */
|
|
#define I2C_BIT_SMC0 0x0008
|
|
#define I2C_BIT_DFC0 0x0004
|
|
|
|
/* I2C IICSE0 Masks */
|
|
#define I2C_BIT_MSTS0 0x0080
|
|
#define I2C_BIT_ALD0 0x0040
|
|
#define I2C_BIT_EXC0 0x0020
|
|
#define I2C_BIT_COI0 0x0010
|
|
#define I2C_BIT_TRC0 0x0008
|
|
#define I2C_BIT_ACKD0 0x0004
|
|
#define I2C_BIT_STD0 0x0002
|
|
#define I2C_BIT_SPD0 0x0001
|
|
|
|
/* I2C IICF0 Masks */
|
|
#define I2C_BIT_STCF 0x0080
|
|
#define I2C_BIT_IICBSY 0x0040
|
|
#define I2C_BIT_STCEN 0x0002
|
|
#define I2C_BIT_IICRSV 0x0001
|
|
|
|
struct em_i2c_device {
|
|
void __iomem *base;
|
|
struct i2c_adapter adap;
|
|
struct completion msg_done;
|
|
struct clk *sclk;
|
|
struct i2c_client *slave;
|
|
int irq;
|
|
};
|
|
|
|
static inline void em_clear_set_bit(struct em_i2c_device *priv, u8 clear, u8 set, u8 reg)
|
|
{
|
|
writeb((readb(priv->base + reg) & ~clear) | set, priv->base + reg);
|
|
}
|
|
|
|
static int em_i2c_wait_for_event(struct em_i2c_device *priv)
|
|
{
|
|
unsigned long time_left;
|
|
int status;
|
|
|
|
reinit_completion(&priv->msg_done);
|
|
|
|
time_left = wait_for_completion_timeout(&priv->msg_done, priv->adap.timeout);
|
|
|
|
if (!time_left)
|
|
return -ETIMEDOUT;
|
|
|
|
status = readb(priv->base + I2C_OFS_IICSE0);
|
|
return status & I2C_BIT_ALD0 ? -EAGAIN : status;
|
|
}
|
|
|
|
static void em_i2c_stop(struct em_i2c_device *priv)
|
|
{
|
|
/* Send Stop condition */
|
|
em_clear_set_bit(priv, 0, I2C_BIT_SPT0 | I2C_BIT_SPIE0, I2C_OFS_IICC0);
|
|
|
|
/* Wait for stop condition */
|
|
em_i2c_wait_for_event(priv);
|
|
}
|
|
|
|
static void em_i2c_reset(struct i2c_adapter *adap)
|
|
{
|
|
struct em_i2c_device *priv = i2c_get_adapdata(adap);
|
|
int retr;
|
|
|
|
/* If I2C active */
|
|
if (readb(priv->base + I2C_OFS_IICACT0) & I2C_BIT_IICE0) {
|
|
/* Disable I2C operation */
|
|
writeb(0, priv->base + I2C_OFS_IICACT0);
|
|
|
|
retr = 1000;
|
|
while (readb(priv->base + I2C_OFS_IICACT0) == 1 && retr)
|
|
retr--;
|
|
WARN_ON(retr == 0);
|
|
}
|
|
|
|
/* Transfer mode set */
|
|
writeb(I2C_BIT_DFC0, priv->base + I2C_OFS_IICCL0);
|
|
|
|
/* Can Issue start without detecting a stop, Reservation disabled. */
|
|
writeb(I2C_BIT_STCEN | I2C_BIT_IICRSV, priv->base + I2C_OFS_IICF0);
|
|
|
|
/* I2C enable, 9 bit interrupt mode */
|
|
writeb(I2C_BIT_WTIM0, priv->base + I2C_OFS_IICC0);
|
|
|
|
/* Enable I2C operation */
|
|
writeb(I2C_BIT_IICE0, priv->base + I2C_OFS_IICACT0);
|
|
|
|
retr = 1000;
|
|
while (readb(priv->base + I2C_OFS_IICACT0) == 0 && retr)
|
|
retr--;
|
|
WARN_ON(retr == 0);
|
|
}
|
|
|
|
static int __em_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
|
|
int stop)
|
|
{
|
|
struct em_i2c_device *priv = i2c_get_adapdata(adap);
|
|
int count, status, read = !!(msg->flags & I2C_M_RD);
|
|
|
|
/* Send start condition */
|
|
em_clear_set_bit(priv, 0, I2C_BIT_ACKE0 | I2C_BIT_WTIM0, I2C_OFS_IICC0);
|
|
em_clear_set_bit(priv, 0, I2C_BIT_STT0, I2C_OFS_IICC0);
|
|
|
|
/* Send slave address and R/W type */
|
|
writeb(i2c_8bit_addr_from_msg(msg), priv->base + I2C_OFS_IIC0);
|
|
|
|
/* Wait for transaction */
|
|
status = em_i2c_wait_for_event(priv);
|
|
if (status < 0)
|
|
goto out_reset;
|
|
|
|
/* Received NACK (result of setting slave address and R/W) */
|
|
if (!(status & I2C_BIT_ACKD0)) {
|
|
em_i2c_stop(priv);
|
|
goto out;
|
|
}
|
|
|
|
/* Extra setup for read transactions */
|
|
if (read) {
|
|
/* 8 bit interrupt mode */
|
|
em_clear_set_bit(priv, I2C_BIT_WTIM0, I2C_BIT_ACKE0, I2C_OFS_IICC0);
|
|
em_clear_set_bit(priv, I2C_BIT_WTIM0, I2C_BIT_WREL0, I2C_OFS_IICC0);
|
|
|
|
/* Wait for transaction */
|
|
status = em_i2c_wait_for_event(priv);
|
|
if (status < 0)
|
|
goto out_reset;
|
|
}
|
|
|
|
/* Send / receive data */
|
|
for (count = 0; count < msg->len; count++) {
|
|
if (read) { /* Read transaction */
|
|
msg->buf[count] = readb(priv->base + I2C_OFS_IIC0);
|
|
em_clear_set_bit(priv, 0, I2C_BIT_WREL0, I2C_OFS_IICC0);
|
|
|
|
} else { /* Write transaction */
|
|
/* Received NACK */
|
|
if (!(status & I2C_BIT_ACKD0)) {
|
|
em_i2c_stop(priv);
|
|
goto out;
|
|
}
|
|
|
|
/* Write data */
|
|
writeb(msg->buf[count], priv->base + I2C_OFS_IIC0);
|
|
}
|
|
|
|
/* Wait for R/W transaction */
|
|
status = em_i2c_wait_for_event(priv);
|
|
if (status < 0)
|
|
goto out_reset;
|
|
}
|
|
|
|
if (stop)
|
|
em_i2c_stop(priv);
|
|
|
|
return count;
|
|
|
|
out_reset:
|
|
em_i2c_reset(adap);
|
|
out:
|
|
return status < 0 ? status : -ENXIO;
|
|
}
|
|
|
|
static int em_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
|
|
int num)
|
|
{
|
|
struct em_i2c_device *priv = i2c_get_adapdata(adap);
|
|
int ret, i;
|
|
|
|
if (readb(priv->base + I2C_OFS_IICF0) & I2C_BIT_IICBSY)
|
|
return -EAGAIN;
|
|
|
|
for (i = 0; i < num; i++) {
|
|
ret = __em_i2c_xfer(adap, &msgs[i], (i == (num - 1)));
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
/* I2C transfer completed */
|
|
return num;
|
|
}
|
|
|
|
static bool em_i2c_slave_irq(struct em_i2c_device *priv)
|
|
{
|
|
u8 status, value;
|
|
enum i2c_slave_event event;
|
|
int ret;
|
|
|
|
if (!priv->slave)
|
|
return false;
|
|
|
|
status = readb(priv->base + I2C_OFS_IICSE0);
|
|
|
|
/* Extension code, do not participate */
|
|
if (status & I2C_BIT_EXC0) {
|
|
em_clear_set_bit(priv, 0, I2C_BIT_LREL0, I2C_OFS_IICC0);
|
|
return true;
|
|
}
|
|
|
|
/* Stop detected, we don't know if it's for slave or master */
|
|
if (status & I2C_BIT_SPD0) {
|
|
/* Notify slave device */
|
|
i2c_slave_event(priv->slave, I2C_SLAVE_STOP, &value);
|
|
/* Pretend we did not handle the interrupt */
|
|
return false;
|
|
}
|
|
|
|
/* Only handle interrupts addressed to us */
|
|
if (!(status & I2C_BIT_COI0))
|
|
return false;
|
|
|
|
/* Enable stop interrupts */
|
|
em_clear_set_bit(priv, 0, I2C_BIT_SPIE0, I2C_OFS_IICC0);
|
|
|
|
/* Transmission or Reception */
|
|
if (status & I2C_BIT_TRC0) {
|
|
if (status & I2C_BIT_ACKD0) {
|
|
/* 9 bit interrupt mode */
|
|
em_clear_set_bit(priv, 0, I2C_BIT_WTIM0, I2C_OFS_IICC0);
|
|
|
|
/* Send data */
|
|
event = status & I2C_BIT_STD0 ?
|
|
I2C_SLAVE_READ_REQUESTED :
|
|
I2C_SLAVE_READ_PROCESSED;
|
|
i2c_slave_event(priv->slave, event, &value);
|
|
writeb(value, priv->base + I2C_OFS_IIC0);
|
|
} else {
|
|
/* NACK, stop transmitting */
|
|
em_clear_set_bit(priv, 0, I2C_BIT_LREL0, I2C_OFS_IICC0);
|
|
}
|
|
} else {
|
|
/* 8 bit interrupt mode */
|
|
em_clear_set_bit(priv, I2C_BIT_WTIM0, I2C_BIT_ACKE0,
|
|
I2C_OFS_IICC0);
|
|
em_clear_set_bit(priv, I2C_BIT_WTIM0, I2C_BIT_WREL0,
|
|
I2C_OFS_IICC0);
|
|
|
|
if (status & I2C_BIT_STD0) {
|
|
i2c_slave_event(priv->slave, I2C_SLAVE_WRITE_REQUESTED,
|
|
&value);
|
|
} else {
|
|
/* Recv data */
|
|
value = readb(priv->base + I2C_OFS_IIC0);
|
|
ret = i2c_slave_event(priv->slave,
|
|
I2C_SLAVE_WRITE_RECEIVED, &value);
|
|
if (ret < 0)
|
|
em_clear_set_bit(priv, I2C_BIT_ACKE0, 0,
|
|
I2C_OFS_IICC0);
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static irqreturn_t em_i2c_irq_handler(int this_irq, void *dev_id)
|
|
{
|
|
struct em_i2c_device *priv = dev_id;
|
|
|
|
if (em_i2c_slave_irq(priv))
|
|
return IRQ_HANDLED;
|
|
|
|
complete(&priv->msg_done);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static u32 em_i2c_func(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SLAVE;
|
|
}
|
|
|
|
static int em_i2c_reg_slave(struct i2c_client *slave)
|
|
{
|
|
struct em_i2c_device *priv = i2c_get_adapdata(slave->adapter);
|
|
|
|
if (priv->slave)
|
|
return -EBUSY;
|
|
|
|
if (slave->flags & I2C_CLIENT_TEN)
|
|
return -EAFNOSUPPORT;
|
|
|
|
priv->slave = slave;
|
|
|
|
/* Set slave address */
|
|
writeb(slave->addr << 1, priv->base + I2C_OFS_SVA0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int em_i2c_unreg_slave(struct i2c_client *slave)
|
|
{
|
|
struct em_i2c_device *priv = i2c_get_adapdata(slave->adapter);
|
|
|
|
WARN_ON(!priv->slave);
|
|
|
|
writeb(0, priv->base + I2C_OFS_SVA0);
|
|
|
|
/*
|
|
* Wait for interrupt to finish. New slave irqs cannot happen because we
|
|
* cleared the slave address and, thus, only extension codes will be
|
|
* detected which do not use the slave ptr.
|
|
*/
|
|
synchronize_irq(priv->irq);
|
|
priv->slave = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_algorithm em_i2c_algo = {
|
|
.master_xfer = em_i2c_xfer,
|
|
.functionality = em_i2c_func,
|
|
.reg_slave = em_i2c_reg_slave,
|
|
.unreg_slave = em_i2c_unreg_slave,
|
|
};
|
|
|
|
static int em_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
struct em_i2c_device *priv;
|
|
int ret;
|
|
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(priv->base))
|
|
return PTR_ERR(priv->base);
|
|
|
|
strlcpy(priv->adap.name, "EMEV2 I2C", sizeof(priv->adap.name));
|
|
|
|
priv->sclk = devm_clk_get(&pdev->dev, "sclk");
|
|
if (IS_ERR(priv->sclk))
|
|
return PTR_ERR(priv->sclk);
|
|
|
|
ret = clk_prepare_enable(priv->sclk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->adap.timeout = msecs_to_jiffies(100);
|
|
priv->adap.retries = 5;
|
|
priv->adap.dev.parent = &pdev->dev;
|
|
priv->adap.algo = &em_i2c_algo;
|
|
priv->adap.owner = THIS_MODULE;
|
|
priv->adap.dev.of_node = pdev->dev.of_node;
|
|
|
|
init_completion(&priv->msg_done);
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
i2c_set_adapdata(&priv->adap, priv);
|
|
|
|
em_i2c_reset(&priv->adap);
|
|
|
|
ret = platform_get_irq(pdev, 0);
|
|
if (ret < 0)
|
|
goto err_clk;
|
|
priv->irq = ret;
|
|
ret = devm_request_irq(&pdev->dev, priv->irq, em_i2c_irq_handler, 0,
|
|
"em_i2c", priv);
|
|
if (ret)
|
|
goto err_clk;
|
|
|
|
ret = i2c_add_adapter(&priv->adap);
|
|
|
|
if (ret)
|
|
goto err_clk;
|
|
|
|
dev_info(&pdev->dev, "Added i2c controller %d, irq %d\n", priv->adap.nr,
|
|
priv->irq);
|
|
|
|
return 0;
|
|
|
|
err_clk:
|
|
clk_disable_unprepare(priv->sclk);
|
|
return ret;
|
|
}
|
|
|
|
static int em_i2c_remove(struct platform_device *dev)
|
|
{
|
|
struct em_i2c_device *priv = platform_get_drvdata(dev);
|
|
|
|
i2c_del_adapter(&priv->adap);
|
|
clk_disable_unprepare(priv->sclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id em_i2c_ids[] = {
|
|
{ .compatible = "renesas,iic-emev2", },
|
|
{ }
|
|
};
|
|
|
|
static struct platform_driver em_i2c_driver = {
|
|
.probe = em_i2c_probe,
|
|
.remove = em_i2c_remove,
|
|
.driver = {
|
|
.name = "em-i2c",
|
|
.of_match_table = em_i2c_ids,
|
|
}
|
|
};
|
|
module_platform_driver(em_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("EMEV2 I2C bus driver");
|
|
MODULE_AUTHOR("Ian Molton");
|
|
MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DEVICE_TABLE(of, em_i2c_ids);
|