microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/i2c/busses
История
Mika Westerberg 56d4b8a24c i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348 
ACPI SSCN/FMCN methods were originally added because then the platform can
provide the most accurate HCNT/LCNT values to the driver. However, this
seems not to be true for Dell Inspiron 7348 where using these causes the
touchpad to fail in boot:

  i2c_hid i2c-DLL0675:00: failed to retrieve report from device.
  i2c_designware INT3433:00: i2c_dw_handle_tx_abort: lost arbitration
  i2c_hid i2c-DLL0675:00: failed to retrieve report from device.
  i2c_designware INT3433:00: controller timed out

The values received from ACPI are (in fast mode):

  HCNT: 72
  LCNT: 160

this translates to following timings (input clock is 100MHz on Broadwell):

  tHIGH: 720 ns (spec min 600 ns)
  tLOW: 1600 ns (spec min 1300 ns)
  Bus period: 2920 ns (assuming 300 ns tf and tr)
  Bus speed: 342.5 kHz

Both tHIGH and tLOW are within the I2C specification.

The calculated values when ACPI parameters are not used are (in fast mode):

  HCNT: 87
  LCNT: 159

which translates to:

  tHIGH: 870 ns (spec min 600 ns)
  tLOW: 1590 ns (spec min 1300 ns)
  Bus period 3060 ns (assuming 300 ns tf and tr)
  Bus speed 326.8 kHz

These values are also within the I2C specification.

Since both ACPI and calculated values meet the I2C specification timing
requirements it is hard to say why the touchpad does not function properly
with the ACPI values except that the bus speed is higher in this case (but
still well below the max 400kHz).

Solve this by adding DMI quirk to the driver that disables using ACPI
parameters on this particulare machine.

Reported-by: Pavel Roskin <plroskin@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Pavel Roskin <plroskin@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
 		2015-10-18 14:11:08 +02:00
..
Kconfig i2c: Replace I2C_CROS_EC_TUNNEL dependency 2015-08-24 14:17:53 +02:00
Makefile i2c: lpc2k: add driver 2015-08-24 14:05:18 +02:00
i2c-acorn.c i2c: acorn: is tristate and should use module.h 2014-01-24 18:21:11 +01:00
i2c-ali15x3.c i2c: remove FSF address 2014-11-07 18:35:33 +01:00
i2c-ali1535.c i2c: remove FSF address 2014-11-07 18:35:33 +01:00
i2c-ali1563.c i2c: ali1563: fix checkpatch.pl issues 2014-05-22 10:09:21 +02:00
i2c-amd756-s4882.c i2c: remove FSF address 2014-11-07 18:35:33 +01:00
i2c-amd756.c i2c: remove FSF address 2014-11-07 18:35:33 +01:00
i2c-amd8111.c i2c: remove DEFINE_PCI_DEVICE_TABLE macro 2014-03-13 09:44:59 +01:00
i2c-at91.c i2c: at91: fix code checker warnings 2015-06-11 22:12:53 +09:00
i2c-au1550.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
i2c-axxia.c i2c: axxia: Add bus recovery functionality 2015-06-03 00:40:16 +09:00
i2c-bcm-iproc.c i2c: iproc: Add suspend/resume support 2015-06-03 03:04:53 +09:00
i2c-bcm-kona.c i2c: busses: drop owner assignment from platform_drivers 2014-10-20 16:20:37 +02:00
i2c-bcm2835.c i2c: busses: i2c-bcm2835: limits cdiv to allowed values 2015-06-23 19:55:19 +02:00
i2c-bfin-twi.c i2c: Fix typo in i2c-bfin-twi.c 2015-07-31 13:32:31 +02:00
i2c-brcmstb.c i2c: brcmstb: Add Broadcom settop SoC i2c controller driver 2015-06-10 22:02:57 +09:00
i2c-cadence.c i2c: cadence: set THIS_MODULE to the owner of the adapter 2015-08-10 08:37:38 +02:00
i2c-cbus-gpio.c i2c: busses: drop owner assignment from platform_drivers 2014-10-20 16:20:37 +02:00
i2c-cpm.c i2c: cpm: make use of the new infrastructure for quirks 2015-03-13 15:10:54 +01:00
i2c-cros-ec-tunnel.c mfd: cros_ec: Use a zero-length array for command data 2015-06-15 13:18:19 +01:00
i2c-davinci.c i2c: davinci: Optimize SCL generation 2015-06-17 14:40:58 +02:00
i2c-designware-baytrail.c i2c: designware-baytrail: baytrail_i2c_acquire() might sleep 2015-03-07 01:08:26 +01:00
i2c-designware-core.c i2c: designware: Make debug print in i2c_dw_isr() shorter 2015-08-10 08:37:36 +02:00
i2c-designware-core.h i2c: designware: Add Intel Baytrail PMIC I2C bus support 2015-01-26 12:26:25 +01:00
i2c-designware-pcidrv.c i2c: designware-pci: use IRQF_COND_SUSPEND flag 2015-08-10 08:37:35 +02:00
i2c-designware-platdrv.c i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348 2015-10-18 14:11:08 +02:00
i2c-digicolor.c i2c: digicolor: remove duplicate include 2015-04-23 19:35:32 +02:00
i2c-diolan-u2c.c i2c: remove unnecessary OOM messages 2014-06-02 19:24:33 +02:00
i2c-dln2.c i2c: dln2: set the device tree node of the adapter 2015-03-27 16:56:21 +01:00
i2c-efm32.c i2c: busses: drop owner assignment from platform_drivers 2014-10-20 16:20:37 +02:00
i2c-eg20t.c i2c: remove FSF address 2014-11-07 18:35:33 +01:00
i2c-elektor.c i2c: remove FSF address 2014-11-07 18:35:33 +01:00
i2c-emev2.c i2c: emev2: add driver 2015-08-10 08:37:29 +02:00
i2c-exynos5.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
i2c-gpio.c i2c: busses: drop owner assignment from platform_drivers 2014-10-20 16:20:37 +02:00
i2c-highlander.c i2c: busses: drop owner assignment from platform_drivers 2014-10-20 16:20:37 +02:00
i2c-hix5hd2.c i2c: hix5hd2: Fix modalias to make module auto-loading work 2015-05-12 18:09:33 +02:00
i2c-hydra.c i2c: remove FSF address 2014-11-07 18:35:33 +01:00
i2c-i801.c i2c: i801: Create iTCO device on newer Intel PCHs 2015-08-11 15:03:51 +01:00
i2c-ibm_iic.c i2c: busses: drop owner assignment from platform_drivers 2014-10-20 16:20:37 +02:00
i2c-ibm_iic.h i2c-ibm_iic: Whitespace cleanup 2008-01-27 18:14:45 +01:00
i2c-img-scb.c i2c: img-scb: fixup of wait_for_completion_timeout return handling 2015-03-15 10:54:09 +01:00
i2c-imx.c i2c: constify platform_device_id 2015-05-12 18:27:48 +02:00
i2c-iop3xx.c i2c: busses: drop owner assignment from platform_drivers 2014-10-20 16:20:37 +02:00
i2c-iop3xx.h i2c: remove FSF address 2014-11-07 18:35:33 +01:00
i2c-isch.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
i2c-ismt.c i2c: ismt: fix type of return var of wait_for_completion_timeout 2015-03-15 10:50:02 +01:00
i2c-jz4780.c i2c: jz4780: Fix return value if probe fails 2015-07-09 22:17:31 +02:00
i2c-kempld.c i2c: busses: drop owner assignment from platform_drivers 2014-10-20 16:20:37 +02:00
i2c-lpc2k.c i2c: lpc2k: add driver 2015-08-24 14:05:18 +02:00
i2c-meson.c i2c: add support for Amlogic Meson I2C controller 2014-11-18 16:16:44 +01:00
i2c-mpc.c i2c: mpc: Fix ISR return value 2015-03-27 16:53:41 +01:00
i2c-mt65xx.c i2c: mediatek: Fixup i2c ack error interrupt handling 2015-08-11 16:54:47 +02:00
i2c-mv64xxx.c i2c: mv64xxx: rework offload support to fix several problems 2014-12-17 19:26:03 +01:00
i2c-mxs.c i2c: constify platform_device_id 2015-05-12 18:27:48 +02:00
i2c-nforce2-s4985.c i2c: remove FSF address 2014-11-07 18:35:33 +01:00
i2c-nforce2.c i2c: remove FSF address 2014-11-07 18:35:33 +01:00
i2c-nomadik.c i2c: nomadik: match status to return type of read_i2c 2015-03-15 10:51:13 +01:00
i2c-ocores.c i2c: ocores: rework clk code to handle NULL cookie 2015-02-20 18:01:23 +01:00
i2c-octeon.c i2c: octeon: remove unused signal handling 2015-06-17 14:50:03 +02:00
i2c-omap.c i2c: omap: fix cleanup regression 2015-08-10 08:37:33 +02:00
i2c-opal.c i2c: opal: Update quirk flags to do write-then-anything 2015-03-14 12:08:21 +01:00
i2c-parport-light.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
i2c-parport.c i2c: parport: start using pr_fmt 2015-08-10 08:37:28 +02:00
i2c-parport.h i2c: parport: Add VCT-jig adapter 2015-08-10 08:37:34 +02:00
i2c-pasemi.c i2c: remove FSF address 2014-11-07 18:35:33 +01:00
i2c-pca-isa.c i2c: remove FSF address 2014-11-07 18:35:33 +01:00
i2c-pca-platform.c i2c: pca-platform: fix broken email address 2015-04-23 19:35:30 +02:00
i2c-piix4.c i2c-piix4: Use Macro for AMD CZ SMBus device ID 2015-06-16 08:58:06 +02:00
i2c-pmcmsp.c i2c: pmcmsp: make use of the new infrastructure for quirks 2015-03-13 15:10:58 +01:00
i2c-pnx.c i2c: busses: drop owner assignment from platform_drivers 2014-10-20 16:20:37 +02:00
i2c-powermac.c i2c: powermac: make use of the new infrastructure for quirks 2015-03-13 15:10:57 +01:00
i2c-puv3.c i2c: busses: drop owner assignment from platform_drivers 2014-10-20 16:20:37 +02:00
i2c-pxa-pci.c i2c: remove DEFINE_PCI_DEVICE_TABLE macro 2014-03-13 09:44:59 +01:00
i2c-pxa.c i2c: pxa: Use devm_ variants in probe function 2015-08-10 08:37:31 +02:00
i2c-qup.c i2c: qup: make use of the new infrastructure for quirks 2015-03-13 15:10:53 +01:00
i2c-rcar.c i2c: rcar: enable RuntimePM before registering to the core 2015-10-15 14:25:56 +02:00
i2c-riic.c i2c: busses: drop owner assignment from platform_drivers 2014-10-20 16:20:37 +02:00
i2c-rk3x.c i2c: rk3x: Increase wait timeout to 1 second 2015-05-12 15:15:17 +02:00
i2c-robotfuzz-osif.c i2c: Add bus driver for for OSIF USB i2c device. 2014-01-13 13:56:56 +01:00
i2c-s3c2410.c i2c: s3c2410: enable RuntimePM before registering to the core 2015-10-15 14:26:07 +02:00
i2c-scmi.c i2c: delete non-required instances of include <linux/init.h> 2014-01-24 18:24:31 +01:00
i2c-sh7760.c i2c: busses: drop owner assignment from platform_drivers 2014-10-20 16:20:37 +02:00
i2c-sh_mobile.c i2c: sh_mobile: use proper type for timeout 2015-06-23 19:50:27 +02:00
i2c-sibyte.c i2c: remove FSF address 2014-11-07 18:35:33 +01:00
i2c-simtec.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
i2c-sirf.c i2c: busses: drop owner assignment from platform_drivers 2014-10-20 16:20:37 +02:00
i2c-sis96x.c i2c: remove FSF address 2014-11-07 18:35:33 +01:00
i2c-sis630.c i2c: remove FSF address 2014-11-07 18:35:33 +01:00
i2c-sis5595.c i2c: remove FSF address 2014-11-07 18:35:33 +01:00
i2c-st.c i2c: st: add include for pinctrl 2015-04-23 19:35:33 +02:00
i2c-stu300.c i2c: busses: drop owner assignment from platform_drivers 2014-10-20 16:20:37 +02:00
i2c-sun6i-p2wi.c i2c: busses: drop owner assignment from platform_drivers 2014-10-20 16:20:37 +02:00
i2c-taos-evm.c i2c: remove FSF address 2014-11-07 18:35:33 +01:00
i2c-tegra.c i2c: tegra: add support for fast plus (FM+) mode clock rate 2015-08-10 08:37:33 +02:00
i2c-tiny-usb.c i2c: i2c-tiny-usb: Remove RobotFuzz USB vendor:product ID 2014-01-13 13:56:52 +01:00
i2c-versatile.c i2c: busses: drop owner assignment from platform_drivers 2014-10-20 16:20:37 +02:00
i2c-via.c i2c: remove FSF address 2014-11-07 18:35:33 +01:00
i2c-viapro.c i2c: remove FSF address 2014-11-07 18:35:33 +01:00
i2c-viperboard.c i2c: viperboard: clean up inconsistent indenting 2015-08-10 08:37:38 +02:00
i2c-wmt.c i2c: wmt: match return type of wait_for_completion_timeout 2015-03-15 10:29:53 +01:00
i2c-xgene-slimpro.c i2c: xgene-slimpro: dma_mapping_error() doesn't return an error code 2015-08-24 14:23:31 +02:00
i2c-xiic.c i2c: xiic: Do not continue in case of errors in Rx 2015-08-10 08:37:33 +02:00
i2c-xlp9xx.c i2c: xlp9xx: Driver for Netlogic XLP9XX/5XX I2C controller 2015-04-10 18:59:49 +02:00
i2c-xlr.c i2c: busses: drop owner assignment from platform_drivers 2014-10-20 16:20:37 +02:00
scx200_acb.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00