333 строки
6.6 KiB
ArmAsm
333 строки
6.6 KiB
ArmAsm
/*
|
|
* arch/arm/mach-at91/pm_slow_clock.S
|
|
*
|
|
* Copyright (C) 2006 Savin Zlobec
|
|
*
|
|
* AT91SAM9 support:
|
|
* Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/at91_pmc.h>
|
|
#include <mach/at91_ramc.h>
|
|
|
|
|
|
#ifdef CONFIG_SOC_AT91SAM9263
|
|
/*
|
|
* FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
|
|
* handle those cases both here and in the Suspend-To-RAM support.
|
|
*/
|
|
#warning Assuming EB1 SDRAM controller is *NOT* used
|
|
#endif
|
|
|
|
/*
|
|
* When SLOWDOWN_MASTER_CLOCK is defined we will also slow down the Master
|
|
* clock during suspend by adjusting its prescalar and divisor.
|
|
* NOTE: This hasn't been shown to be stable on SAM9s; and on the RM9200 there
|
|
* are errata regarding adjusting the prescalar and divisor.
|
|
*/
|
|
#undef SLOWDOWN_MASTER_CLOCK
|
|
|
|
#define MCKRDY_TIMEOUT 1000
|
|
#define MOSCRDY_TIMEOUT 1000
|
|
#define PLLALOCK_TIMEOUT 1000
|
|
#define PLLBLOCK_TIMEOUT 1000
|
|
|
|
pmc .req r0
|
|
sdramc .req r1
|
|
ramc1 .req r2
|
|
memctrl .req r3
|
|
tmp1 .req r4
|
|
tmp2 .req r5
|
|
|
|
/*
|
|
* Wait until master clock is ready (after switching master clock source)
|
|
*/
|
|
.macro wait_mckrdy
|
|
mov tmp2, #MCKRDY_TIMEOUT
|
|
1: sub tmp2, tmp2, #1
|
|
cmp tmp2, #0
|
|
beq 2f
|
|
ldr tmp1, [pmc, #AT91_PMC_SR]
|
|
tst tmp1, #AT91_PMC_MCKRDY
|
|
beq 1b
|
|
2:
|
|
.endm
|
|
|
|
/*
|
|
* Wait until master oscillator has stabilized.
|
|
*/
|
|
.macro wait_moscrdy
|
|
mov tmp2, #MOSCRDY_TIMEOUT
|
|
1: sub tmp2, tmp2, #1
|
|
cmp tmp2, #0
|
|
beq 2f
|
|
ldr tmp1, [pmc, #AT91_PMC_SR]
|
|
tst tmp1, #AT91_PMC_MOSCS
|
|
beq 1b
|
|
2:
|
|
.endm
|
|
|
|
/*
|
|
* Wait until PLLA has locked.
|
|
*/
|
|
.macro wait_pllalock
|
|
mov tmp2, #PLLALOCK_TIMEOUT
|
|
1: sub tmp2, tmp2, #1
|
|
cmp tmp2, #0
|
|
beq 2f
|
|
ldr tmp1, [pmc, #AT91_PMC_SR]
|
|
tst tmp1, #AT91_PMC_LOCKA
|
|
beq 1b
|
|
2:
|
|
.endm
|
|
|
|
/*
|
|
* Wait until PLLB has locked.
|
|
*/
|
|
.macro wait_pllblock
|
|
mov tmp2, #PLLBLOCK_TIMEOUT
|
|
1: sub tmp2, tmp2, #1
|
|
cmp tmp2, #0
|
|
beq 2f
|
|
ldr tmp1, [pmc, #AT91_PMC_SR]
|
|
tst tmp1, #AT91_PMC_LOCKB
|
|
beq 1b
|
|
2:
|
|
.endm
|
|
|
|
.text
|
|
|
|
/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc,
|
|
* void __iomem *ramc1, int memctrl)
|
|
*/
|
|
ENTRY(at91_slow_clock)
|
|
/* Save registers on stack */
|
|
stmfd sp!, {r4 - r12, lr}
|
|
|
|
/*
|
|
* Register usage:
|
|
* R0 = Base address of AT91_PMC
|
|
* R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
|
|
* R2 = Base address of second RAM Controller or 0 if not present
|
|
* R3 = Memory controller
|
|
* R4 = temporary register
|
|
* R5 = temporary register
|
|
*/
|
|
|
|
/* Drain write buffer */
|
|
mov tmp1, #0
|
|
mcr p15, 0, tmp1, c7, c10, 4
|
|
|
|
cmp memctrl, #AT91_MEMCTRL_MC
|
|
bne ddr_sr_enable
|
|
|
|
/*
|
|
* at91rm9200 Memory controller
|
|
*/
|
|
/* Put SDRAM in self-refresh mode */
|
|
mov tmp1, #1
|
|
str tmp1, [sdramc, #AT91RM9200_SDRAMC_SRR]
|
|
b sdr_sr_done
|
|
|
|
/*
|
|
* DDRSDR Memory controller
|
|
*/
|
|
ddr_sr_enable:
|
|
cmp memctrl, #AT91_MEMCTRL_DDRSDR
|
|
bne sdr_sr_enable
|
|
|
|
/* prepare for DDRAM self-refresh mode */
|
|
ldr tmp1, [sdramc, #AT91_DDRSDRC_LPR]
|
|
str tmp1, .saved_sam9_lpr
|
|
bic tmp1, #AT91_DDRSDRC_LPCB
|
|
orr tmp1, #AT91_DDRSDRC_LPCB_SELF_REFRESH
|
|
|
|
/* figure out if we use the second ram controller */
|
|
cmp ramc1, #0
|
|
ldrne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
|
|
strne tmp2, .saved_sam9_lpr1
|
|
bicne tmp2, #AT91_DDRSDRC_LPCB
|
|
orrne tmp2, #AT91_DDRSDRC_LPCB_SELF_REFRESH
|
|
|
|
/* Enable DDRAM self-refresh mode */
|
|
str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
|
|
strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
|
|
|
|
b sdr_sr_done
|
|
|
|
/*
|
|
* SDRAMC Memory controller
|
|
*/
|
|
sdr_sr_enable:
|
|
/* Enable SDRAM self-refresh mode */
|
|
ldr tmp1, [sdramc, #AT91_SDRAMC_LPR]
|
|
str tmp1, .saved_sam9_lpr
|
|
|
|
bic tmp1, #AT91_SDRAMC_LPCB
|
|
orr tmp1, #AT91_SDRAMC_LPCB_SELF_REFRESH
|
|
str tmp1, [sdramc, #AT91_SDRAMC_LPR]
|
|
|
|
sdr_sr_done:
|
|
/* Save Master clock setting */
|
|
ldr tmp1, [pmc, #AT91_PMC_MCKR]
|
|
str tmp1, .saved_mckr
|
|
|
|
/*
|
|
* Set the Master clock source to slow clock
|
|
*/
|
|
bic tmp1, tmp1, #AT91_PMC_CSS
|
|
str tmp1, [pmc, #AT91_PMC_MCKR]
|
|
|
|
wait_mckrdy
|
|
|
|
#ifdef SLOWDOWN_MASTER_CLOCK
|
|
/*
|
|
* Set the Master Clock PRES and MDIV fields.
|
|
*
|
|
* See AT91RM9200 errata #27 and #28 for details.
|
|
*/
|
|
mov tmp1, #0
|
|
str tmp1, [pmc, #AT91_PMC_MCKR]
|
|
|
|
wait_mckrdy
|
|
#endif
|
|
|
|
/* Save PLLA setting and disable it */
|
|
ldr tmp1, [pmc, #AT91_CKGR_PLLAR]
|
|
str tmp1, .saved_pllar
|
|
|
|
mov tmp1, #AT91_PMC_PLLCOUNT
|
|
orr tmp1, tmp1, #(1 << 29) /* bit 29 always set */
|
|
str tmp1, [pmc, #AT91_CKGR_PLLAR]
|
|
|
|
/* Save PLLB setting and disable it */
|
|
ldr tmp1, [pmc, #AT91_CKGR_PLLBR]
|
|
str tmp1, .saved_pllbr
|
|
|
|
mov tmp1, #AT91_PMC_PLLCOUNT
|
|
str tmp1, [pmc, #AT91_CKGR_PLLBR]
|
|
|
|
/* Turn off the main oscillator */
|
|
ldr tmp1, [pmc, #AT91_CKGR_MOR]
|
|
bic tmp1, tmp1, #AT91_PMC_MOSCEN
|
|
str tmp1, [pmc, #AT91_CKGR_MOR]
|
|
|
|
/* Wait for interrupt */
|
|
mcr p15, 0, tmp1, c7, c0, 4
|
|
|
|
/* Turn on the main oscillator */
|
|
ldr tmp1, [pmc, #AT91_CKGR_MOR]
|
|
orr tmp1, tmp1, #AT91_PMC_MOSCEN
|
|
str tmp1, [pmc, #AT91_CKGR_MOR]
|
|
|
|
wait_moscrdy
|
|
|
|
/* Restore PLLB setting */
|
|
ldr tmp1, .saved_pllbr
|
|
str tmp1, [pmc, #AT91_CKGR_PLLBR]
|
|
|
|
tst tmp1, #(AT91_PMC_MUL & 0xff0000)
|
|
bne 1f
|
|
tst tmp1, #(AT91_PMC_MUL & ~0xff0000)
|
|
beq 2f
|
|
1:
|
|
wait_pllblock
|
|
2:
|
|
|
|
/* Restore PLLA setting */
|
|
ldr tmp1, .saved_pllar
|
|
str tmp1, [pmc, #AT91_CKGR_PLLAR]
|
|
|
|
tst tmp1, #(AT91_PMC_MUL & 0xff0000)
|
|
bne 3f
|
|
tst tmp1, #(AT91_PMC_MUL & ~0xff0000)
|
|
beq 4f
|
|
3:
|
|
wait_pllalock
|
|
4:
|
|
|
|
#ifdef SLOWDOWN_MASTER_CLOCK
|
|
/*
|
|
* First set PRES if it was not 0,
|
|
* than set CSS and MDIV fields.
|
|
*
|
|
* See AT91RM9200 errata #27 and #28 for details.
|
|
*/
|
|
ldr tmp1, .saved_mckr
|
|
tst tmp1, #AT91_PMC_PRES
|
|
beq 2f
|
|
and tmp1, tmp1, #AT91_PMC_PRES
|
|
str tmp1, [pmc, #AT91_PMC_MCKR]
|
|
|
|
wait_mckrdy
|
|
#endif
|
|
|
|
/*
|
|
* Restore master clock setting
|
|
*/
|
|
2: ldr tmp1, .saved_mckr
|
|
str tmp1, [pmc, #AT91_PMC_MCKR]
|
|
|
|
wait_mckrdy
|
|
|
|
/*
|
|
* at91rm9200 Memory controller
|
|
* Do nothing - self-refresh is automatically disabled.
|
|
*/
|
|
cmp memctrl, #AT91_MEMCTRL_MC
|
|
beq ram_restored
|
|
|
|
/*
|
|
* DDRSDR Memory controller
|
|
*/
|
|
cmp memctrl, #AT91_MEMCTRL_DDRSDR
|
|
bne sdr_en_restore
|
|
/* Restore LPR on AT91 with DDRAM */
|
|
ldr tmp1, .saved_sam9_lpr
|
|
str tmp1, [sdramc, #AT91_DDRSDRC_LPR]
|
|
|
|
/* if we use the second ram controller */
|
|
cmp ramc1, #0
|
|
ldrne tmp2, .saved_sam9_lpr1
|
|
strne tmp2, [ramc1, #AT91_DDRSDRC_LPR]
|
|
|
|
b ram_restored
|
|
|
|
/*
|
|
* SDRAMC Memory controller
|
|
*/
|
|
sdr_en_restore:
|
|
/* Restore LPR on AT91 with SDRAM */
|
|
ldr tmp1, .saved_sam9_lpr
|
|
str tmp1, [sdramc, #AT91_SDRAMC_LPR]
|
|
|
|
ram_restored:
|
|
/* Restore registers, and return */
|
|
ldmfd sp!, {r4 - r12, pc}
|
|
|
|
|
|
.saved_mckr:
|
|
.word 0
|
|
|
|
.saved_pllar:
|
|
.word 0
|
|
|
|
.saved_pllbr:
|
|
.word 0
|
|
|
|
.saved_sam9_lpr:
|
|
.word 0
|
|
|
|
.saved_sam9_lpr1:
|
|
.word 0
|
|
|
|
ENTRY(at91_slow_clock_sz)
|
|
.word .-at91_slow_clock
|