282 строки
6.8 KiB
C
282 строки
6.8 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* adjd_s311.c - Support for ADJD-S311-CR999 digital color sensor
|
|
*
|
|
* Copyright (C) 2012 Peter Meerwald <pmeerw@pmeerw.net>
|
|
*
|
|
* driver for ADJD-S311-CR999 digital color sensor (10-bit channels for
|
|
* red, green, blue, clear); 7-bit I2C slave address 0x74
|
|
*
|
|
* limitations: no calibration, no offset mode, no sleep mode
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/bitmap.h>
|
|
#include <linux/err.h>
|
|
#include <linux/irq.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
|
|
#define ADJD_S311_DRV_NAME "adjd_s311"
|
|
|
|
#define ADJD_S311_CTRL 0x00
|
|
#define ADJD_S311_CONFIG 0x01
|
|
#define ADJD_S311_CAP_RED 0x06
|
|
#define ADJD_S311_CAP_GREEN 0x07
|
|
#define ADJD_S311_CAP_BLUE 0x08
|
|
#define ADJD_S311_CAP_CLEAR 0x09
|
|
#define ADJD_S311_INT_RED 0x0a
|
|
#define ADJD_S311_INT_GREEN 0x0c
|
|
#define ADJD_S311_INT_BLUE 0x0e
|
|
#define ADJD_S311_INT_CLEAR 0x10
|
|
#define ADJD_S311_DATA_RED 0x40
|
|
#define ADJD_S311_DATA_GREEN 0x42
|
|
#define ADJD_S311_DATA_BLUE 0x44
|
|
#define ADJD_S311_DATA_CLEAR 0x46
|
|
#define ADJD_S311_OFFSET_RED 0x48
|
|
#define ADJD_S311_OFFSET_GREEN 0x49
|
|
#define ADJD_S311_OFFSET_BLUE 0x4a
|
|
#define ADJD_S311_OFFSET_CLEAR 0x4b
|
|
|
|
#define ADJD_S311_CTRL_GOFS 0x02
|
|
#define ADJD_S311_CTRL_GSSR 0x01
|
|
#define ADJD_S311_CAP_MASK 0x0f
|
|
#define ADJD_S311_INT_MASK 0x0fff
|
|
#define ADJD_S311_DATA_MASK 0x03ff
|
|
|
|
struct adjd_s311_data {
|
|
struct i2c_client *client;
|
|
struct {
|
|
s16 chans[4];
|
|
s64 ts __aligned(8);
|
|
} scan;
|
|
};
|
|
|
|
enum adjd_s311_channel_idx {
|
|
IDX_RED, IDX_GREEN, IDX_BLUE, IDX_CLEAR
|
|
};
|
|
|
|
#define ADJD_S311_DATA_REG(chan) (ADJD_S311_DATA_RED + (chan) * 2)
|
|
#define ADJD_S311_INT_REG(chan) (ADJD_S311_INT_RED + (chan) * 2)
|
|
#define ADJD_S311_CAP_REG(chan) (ADJD_S311_CAP_RED + (chan))
|
|
|
|
static int adjd_s311_req_data(struct iio_dev *indio_dev)
|
|
{
|
|
struct adjd_s311_data *data = iio_priv(indio_dev);
|
|
int tries = 10;
|
|
|
|
int ret = i2c_smbus_write_byte_data(data->client, ADJD_S311_CTRL,
|
|
ADJD_S311_CTRL_GSSR);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
while (tries--) {
|
|
ret = i2c_smbus_read_byte_data(data->client, ADJD_S311_CTRL);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (!(ret & ADJD_S311_CTRL_GSSR))
|
|
break;
|
|
msleep(20);
|
|
}
|
|
|
|
if (tries < 0) {
|
|
dev_err(&data->client->dev,
|
|
"adjd_s311_req_data() failed, data not ready\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adjd_s311_read_data(struct iio_dev *indio_dev, u8 reg, int *val)
|
|
{
|
|
struct adjd_s311_data *data = iio_priv(indio_dev);
|
|
|
|
int ret = adjd_s311_req_data(indio_dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = i2c_smbus_read_word_data(data->client, reg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
*val = ret & ADJD_S311_DATA_MASK;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t adjd_s311_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct adjd_s311_data *data = iio_priv(indio_dev);
|
|
s64 time_ns = iio_get_time_ns(indio_dev);
|
|
int i, j = 0;
|
|
|
|
int ret = adjd_s311_req_data(indio_dev);
|
|
if (ret < 0)
|
|
goto done;
|
|
|
|
for_each_set_bit(i, indio_dev->active_scan_mask,
|
|
indio_dev->masklength) {
|
|
ret = i2c_smbus_read_word_data(data->client,
|
|
ADJD_S311_DATA_REG(i));
|
|
if (ret < 0)
|
|
goto done;
|
|
|
|
data->scan.chans[j++] = ret & ADJD_S311_DATA_MASK;
|
|
}
|
|
|
|
iio_push_to_buffers_with_timestamp(indio_dev, &data->scan, time_ns);
|
|
|
|
done:
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#define ADJD_S311_CHANNEL(_color, _scan_idx) { \
|
|
.type = IIO_INTENSITY, \
|
|
.modified = 1, \
|
|
.address = (IDX_##_color), \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
|
|
BIT(IIO_CHAN_INFO_HARDWAREGAIN) | \
|
|
BIT(IIO_CHAN_INFO_INT_TIME), \
|
|
.channel2 = (IIO_MOD_LIGHT_##_color), \
|
|
.scan_index = (_scan_idx), \
|
|
.scan_type = { \
|
|
.sign = 'u', \
|
|
.realbits = 10, \
|
|
.storagebits = 16, \
|
|
.endianness = IIO_CPU, \
|
|
}, \
|
|
}
|
|
|
|
static const struct iio_chan_spec adjd_s311_channels[] = {
|
|
ADJD_S311_CHANNEL(RED, 0),
|
|
ADJD_S311_CHANNEL(GREEN, 1),
|
|
ADJD_S311_CHANNEL(BLUE, 2),
|
|
ADJD_S311_CHANNEL(CLEAR, 3),
|
|
IIO_CHAN_SOFT_TIMESTAMP(4),
|
|
};
|
|
|
|
static int adjd_s311_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct adjd_s311_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = adjd_s311_read_data(indio_dev,
|
|
ADJD_S311_DATA_REG(chan->address), val);
|
|
if (ret < 0)
|
|
return ret;
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_HARDWAREGAIN:
|
|
ret = i2c_smbus_read_byte_data(data->client,
|
|
ADJD_S311_CAP_REG(chan->address));
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = ret & ADJD_S311_CAP_MASK;
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_INT_TIME:
|
|
ret = i2c_smbus_read_word_data(data->client,
|
|
ADJD_S311_INT_REG(chan->address));
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = 0;
|
|
/*
|
|
* not documented, based on measurement:
|
|
* 4095 LSBs correspond to roughly 4 ms
|
|
*/
|
|
*val2 = ret & ADJD_S311_INT_MASK;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int adjd_s311_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2, long mask)
|
|
{
|
|
struct adjd_s311_data *data = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_HARDWAREGAIN:
|
|
if (val < 0 || val > ADJD_S311_CAP_MASK)
|
|
return -EINVAL;
|
|
|
|
return i2c_smbus_write_byte_data(data->client,
|
|
ADJD_S311_CAP_REG(chan->address), val);
|
|
case IIO_CHAN_INFO_INT_TIME:
|
|
if (val != 0 || val2 < 0 || val2 > ADJD_S311_INT_MASK)
|
|
return -EINVAL;
|
|
|
|
return i2c_smbus_write_word_data(data->client,
|
|
ADJD_S311_INT_REG(chan->address), val2);
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct iio_info adjd_s311_info = {
|
|
.read_raw = adjd_s311_read_raw,
|
|
.write_raw = adjd_s311_write_raw,
|
|
};
|
|
|
|
static int adjd_s311_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct adjd_s311_data *data;
|
|
struct iio_dev *indio_dev;
|
|
int err;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (indio_dev == NULL)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
data->client = client;
|
|
|
|
indio_dev->info = &adjd_s311_info;
|
|
indio_dev->name = ADJD_S311_DRV_NAME;
|
|
indio_dev->channels = adjd_s311_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(adjd_s311_channels);
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
err = devm_iio_triggered_buffer_setup(&client->dev, indio_dev, NULL,
|
|
adjd_s311_trigger_handler, NULL);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return devm_iio_device_register(&client->dev, indio_dev);
|
|
}
|
|
|
|
static const struct i2c_device_id adjd_s311_id[] = {
|
|
{ "adjd_s311", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, adjd_s311_id);
|
|
|
|
static struct i2c_driver adjd_s311_driver = {
|
|
.driver = {
|
|
.name = ADJD_S311_DRV_NAME,
|
|
},
|
|
.probe = adjd_s311_probe,
|
|
.id_table = adjd_s311_id,
|
|
};
|
|
module_i2c_driver(adjd_s311_driver);
|
|
|
|
MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>");
|
|
MODULE_DESCRIPTION("ADJD-S311 color sensor");
|
|
MODULE_LICENSE("GPL");
|