515 строки
13 KiB
C
515 строки
13 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* ISP1704 USB Charger Detection driver
|
|
*
|
|
* Copyright (C) 2010 Nokia Corporation
|
|
* Copyright (C) 2012 - 2013 Pali Rohár <pali@kernel.org>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/types.h>
|
|
#include <linux/device.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/usb/ulpi.h>
|
|
#include <linux/usb/ch9.h>
|
|
#include <linux/usb/gadget.h>
|
|
|
|
/* Vendor specific Power Control register */
|
|
#define ISP1704_PWR_CTRL 0x3d
|
|
#define ISP1704_PWR_CTRL_SWCTRL (1 << 0)
|
|
#define ISP1704_PWR_CTRL_DET_COMP (1 << 1)
|
|
#define ISP1704_PWR_CTRL_BVALID_RISE (1 << 2)
|
|
#define ISP1704_PWR_CTRL_BVALID_FALL (1 << 3)
|
|
#define ISP1704_PWR_CTRL_DP_WKPU_EN (1 << 4)
|
|
#define ISP1704_PWR_CTRL_VDAT_DET (1 << 5)
|
|
#define ISP1704_PWR_CTRL_DPVSRC_EN (1 << 6)
|
|
#define ISP1704_PWR_CTRL_HWDETECT (1 << 7)
|
|
|
|
#define NXP_VENDOR_ID 0x04cc
|
|
|
|
static u16 isp170x_id[] = {
|
|
0x1704,
|
|
0x1707,
|
|
};
|
|
|
|
struct isp1704_charger {
|
|
struct device *dev;
|
|
struct power_supply *psy;
|
|
struct power_supply_desc psy_desc;
|
|
struct gpio_desc *enable_gpio;
|
|
struct usb_phy *phy;
|
|
struct notifier_block nb;
|
|
struct work_struct work;
|
|
|
|
/* properties */
|
|
char model[8];
|
|
unsigned present:1;
|
|
unsigned online:1;
|
|
unsigned current_max;
|
|
};
|
|
|
|
static inline int isp1704_read(struct isp1704_charger *isp, u32 reg)
|
|
{
|
|
return usb_phy_io_read(isp->phy, reg);
|
|
}
|
|
|
|
static inline int isp1704_write(struct isp1704_charger *isp, u32 reg, u32 val)
|
|
{
|
|
return usb_phy_io_write(isp->phy, val, reg);
|
|
}
|
|
|
|
static void isp1704_charger_set_power(struct isp1704_charger *isp, bool on)
|
|
{
|
|
gpiod_set_value(isp->enable_gpio, on);
|
|
}
|
|
|
|
/*
|
|
* Determine is the charging port DCP (dedicated charger) or CDP (Host/HUB
|
|
* chargers).
|
|
*
|
|
* REVISIT: The method is defined in Battery Charging Specification and is
|
|
* applicable to any ULPI transceiver. Nothing isp170x specific here.
|
|
*/
|
|
static inline int isp1704_charger_type(struct isp1704_charger *isp)
|
|
{
|
|
u8 reg;
|
|
u8 func_ctrl;
|
|
u8 otg_ctrl;
|
|
int type = POWER_SUPPLY_TYPE_USB_DCP;
|
|
|
|
func_ctrl = isp1704_read(isp, ULPI_FUNC_CTRL);
|
|
otg_ctrl = isp1704_read(isp, ULPI_OTG_CTRL);
|
|
|
|
/* disable pulldowns */
|
|
reg = ULPI_OTG_CTRL_DM_PULLDOWN | ULPI_OTG_CTRL_DP_PULLDOWN;
|
|
isp1704_write(isp, ULPI_CLR(ULPI_OTG_CTRL), reg);
|
|
|
|
/* full speed */
|
|
isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL),
|
|
ULPI_FUNC_CTRL_XCVRSEL_MASK);
|
|
isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL),
|
|
ULPI_FUNC_CTRL_FULL_SPEED);
|
|
|
|
/* Enable strong pull-up on DP (1.5K) and reset */
|
|
reg = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET;
|
|
isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL), reg);
|
|
usleep_range(1000, 2000);
|
|
|
|
reg = isp1704_read(isp, ULPI_DEBUG);
|
|
if ((reg & 3) != 3)
|
|
type = POWER_SUPPLY_TYPE_USB_CDP;
|
|
|
|
/* recover original state */
|
|
isp1704_write(isp, ULPI_FUNC_CTRL, func_ctrl);
|
|
isp1704_write(isp, ULPI_OTG_CTRL, otg_ctrl);
|
|
|
|
return type;
|
|
}
|
|
|
|
/*
|
|
* ISP1704 detects PS/2 adapters as charger. To make sure the detected charger
|
|
* is actually a dedicated charger, the following steps need to be taken.
|
|
*/
|
|
static inline int isp1704_charger_verify(struct isp1704_charger *isp)
|
|
{
|
|
int ret = 0;
|
|
u8 r;
|
|
|
|
/* Reset the transceiver */
|
|
r = isp1704_read(isp, ULPI_FUNC_CTRL);
|
|
r |= ULPI_FUNC_CTRL_RESET;
|
|
isp1704_write(isp, ULPI_FUNC_CTRL, r);
|
|
usleep_range(1000, 2000);
|
|
|
|
/* Set normal mode */
|
|
r &= ~(ULPI_FUNC_CTRL_RESET | ULPI_FUNC_CTRL_OPMODE_MASK);
|
|
isp1704_write(isp, ULPI_FUNC_CTRL, r);
|
|
|
|
/* Clear the DP and DM pull-down bits */
|
|
r = ULPI_OTG_CTRL_DP_PULLDOWN | ULPI_OTG_CTRL_DM_PULLDOWN;
|
|
isp1704_write(isp, ULPI_CLR(ULPI_OTG_CTRL), r);
|
|
|
|
/* Enable strong pull-up on DP (1.5K) and reset */
|
|
r = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET;
|
|
isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL), r);
|
|
usleep_range(1000, 2000);
|
|
|
|
/* Read the line state */
|
|
if (!isp1704_read(isp, ULPI_DEBUG)) {
|
|
/* Disable strong pull-up on DP (1.5K) */
|
|
isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL),
|
|
ULPI_FUNC_CTRL_TERMSELECT);
|
|
return 1;
|
|
}
|
|
|
|
/* Is it a charger or PS/2 connection */
|
|
|
|
/* Enable weak pull-up resistor on DP */
|
|
isp1704_write(isp, ULPI_SET(ISP1704_PWR_CTRL),
|
|
ISP1704_PWR_CTRL_DP_WKPU_EN);
|
|
|
|
/* Disable strong pull-up on DP (1.5K) */
|
|
isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL),
|
|
ULPI_FUNC_CTRL_TERMSELECT);
|
|
|
|
/* Enable weak pull-down resistor on DM */
|
|
isp1704_write(isp, ULPI_SET(ULPI_OTG_CTRL),
|
|
ULPI_OTG_CTRL_DM_PULLDOWN);
|
|
|
|
/* It's a charger if the line states are clear */
|
|
if (!(isp1704_read(isp, ULPI_DEBUG)))
|
|
ret = 1;
|
|
|
|
/* Disable weak pull-up resistor on DP */
|
|
isp1704_write(isp, ULPI_CLR(ISP1704_PWR_CTRL),
|
|
ISP1704_PWR_CTRL_DP_WKPU_EN);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline int isp1704_charger_detect(struct isp1704_charger *isp)
|
|
{
|
|
unsigned long timeout;
|
|
u8 pwr_ctrl;
|
|
int ret = 0;
|
|
|
|
pwr_ctrl = isp1704_read(isp, ISP1704_PWR_CTRL);
|
|
|
|
/* set SW control bit in PWR_CTRL register */
|
|
isp1704_write(isp, ISP1704_PWR_CTRL,
|
|
ISP1704_PWR_CTRL_SWCTRL);
|
|
|
|
/* enable manual charger detection */
|
|
isp1704_write(isp, ULPI_SET(ISP1704_PWR_CTRL),
|
|
ISP1704_PWR_CTRL_SWCTRL
|
|
| ISP1704_PWR_CTRL_DPVSRC_EN);
|
|
usleep_range(1000, 2000);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(300);
|
|
do {
|
|
/* Check if there is a charger */
|
|
if (isp1704_read(isp, ISP1704_PWR_CTRL)
|
|
& ISP1704_PWR_CTRL_VDAT_DET) {
|
|
ret = isp1704_charger_verify(isp);
|
|
break;
|
|
}
|
|
} while (!time_after(jiffies, timeout) && isp->online);
|
|
|
|
/* recover original state */
|
|
isp1704_write(isp, ISP1704_PWR_CTRL, pwr_ctrl);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline int isp1704_charger_detect_dcp(struct isp1704_charger *isp)
|
|
{
|
|
if (isp1704_charger_detect(isp) &&
|
|
isp1704_charger_type(isp) == POWER_SUPPLY_TYPE_USB_DCP)
|
|
return true;
|
|
else
|
|
return false;
|
|
}
|
|
|
|
static void isp1704_charger_work(struct work_struct *data)
|
|
{
|
|
struct isp1704_charger *isp =
|
|
container_of(data, struct isp1704_charger, work);
|
|
static DEFINE_MUTEX(lock);
|
|
|
|
mutex_lock(&lock);
|
|
|
|
switch (isp->phy->last_event) {
|
|
case USB_EVENT_VBUS:
|
|
/* do not call wall charger detection more times */
|
|
if (!isp->present) {
|
|
isp->online = true;
|
|
isp->present = 1;
|
|
isp1704_charger_set_power(isp, 1);
|
|
|
|
/* detect wall charger */
|
|
if (isp1704_charger_detect_dcp(isp)) {
|
|
isp->psy_desc.type = POWER_SUPPLY_TYPE_USB_DCP;
|
|
isp->current_max = 1800;
|
|
} else {
|
|
isp->psy_desc.type = POWER_SUPPLY_TYPE_USB;
|
|
isp->current_max = 500;
|
|
}
|
|
|
|
/* enable data pullups */
|
|
if (isp->phy->otg->gadget)
|
|
usb_gadget_connect(isp->phy->otg->gadget);
|
|
}
|
|
|
|
if (isp->psy_desc.type != POWER_SUPPLY_TYPE_USB_DCP) {
|
|
/*
|
|
* Only 500mA here or high speed chirp
|
|
* handshaking may break
|
|
*/
|
|
if (isp->current_max > 500)
|
|
isp->current_max = 500;
|
|
|
|
if (isp->current_max > 100)
|
|
isp->psy_desc.type = POWER_SUPPLY_TYPE_USB_CDP;
|
|
}
|
|
break;
|
|
case USB_EVENT_NONE:
|
|
isp->online = false;
|
|
isp->present = 0;
|
|
isp->current_max = 0;
|
|
isp->psy_desc.type = POWER_SUPPLY_TYPE_USB;
|
|
|
|
/*
|
|
* Disable data pullups. We need to prevent the controller from
|
|
* enumerating.
|
|
*
|
|
* FIXME: This is here to allow charger detection with Host/HUB
|
|
* chargers. The pullups may be enabled elsewhere, so this can
|
|
* not be the final solution.
|
|
*/
|
|
if (isp->phy->otg->gadget)
|
|
usb_gadget_disconnect(isp->phy->otg->gadget);
|
|
|
|
isp1704_charger_set_power(isp, 0);
|
|
break;
|
|
default:
|
|
goto out;
|
|
}
|
|
|
|
power_supply_changed(isp->psy);
|
|
out:
|
|
mutex_unlock(&lock);
|
|
}
|
|
|
|
static int isp1704_notifier_call(struct notifier_block *nb,
|
|
unsigned long val, void *v)
|
|
{
|
|
struct isp1704_charger *isp =
|
|
container_of(nb, struct isp1704_charger, nb);
|
|
|
|
schedule_work(&isp->work);
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static int isp1704_charger_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
struct isp1704_charger *isp = power_supply_get_drvdata(psy);
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_PRESENT:
|
|
val->intval = isp->present;
|
|
break;
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
val->intval = isp->online;
|
|
break;
|
|
case POWER_SUPPLY_PROP_CURRENT_MAX:
|
|
val->intval = isp->current_max;
|
|
break;
|
|
case POWER_SUPPLY_PROP_MODEL_NAME:
|
|
val->strval = isp->model;
|
|
break;
|
|
case POWER_SUPPLY_PROP_MANUFACTURER:
|
|
val->strval = "NXP";
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static enum power_supply_property power_props[] = {
|
|
POWER_SUPPLY_PROP_PRESENT,
|
|
POWER_SUPPLY_PROP_ONLINE,
|
|
POWER_SUPPLY_PROP_CURRENT_MAX,
|
|
POWER_SUPPLY_PROP_MODEL_NAME,
|
|
POWER_SUPPLY_PROP_MANUFACTURER,
|
|
};
|
|
|
|
static inline int isp1704_test_ulpi(struct isp1704_charger *isp)
|
|
{
|
|
int vendor;
|
|
int product;
|
|
int i;
|
|
int ret;
|
|
|
|
/* Test ULPI interface */
|
|
ret = isp1704_write(isp, ULPI_SCRATCH, 0xaa);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = isp1704_read(isp, ULPI_SCRATCH);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (ret != 0xaa)
|
|
return -ENODEV;
|
|
|
|
/* Verify the product and vendor id matches */
|
|
vendor = isp1704_read(isp, ULPI_VENDOR_ID_LOW);
|
|
vendor |= isp1704_read(isp, ULPI_VENDOR_ID_HIGH) << 8;
|
|
if (vendor != NXP_VENDOR_ID)
|
|
return -ENODEV;
|
|
|
|
product = isp1704_read(isp, ULPI_PRODUCT_ID_LOW);
|
|
product |= isp1704_read(isp, ULPI_PRODUCT_ID_HIGH) << 8;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(isp170x_id); i++) {
|
|
if (product == isp170x_id[i]) {
|
|
sprintf(isp->model, "isp%x", product);
|
|
return product;
|
|
}
|
|
}
|
|
|
|
dev_err(isp->dev, "product id %x not matching known ids", product);
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int isp1704_charger_probe(struct platform_device *pdev)
|
|
{
|
|
struct isp1704_charger *isp;
|
|
int ret = -ENODEV;
|
|
struct power_supply_config psy_cfg = {};
|
|
|
|
isp = devm_kzalloc(&pdev->dev, sizeof(*isp), GFP_KERNEL);
|
|
if (!isp)
|
|
return -ENOMEM;
|
|
|
|
isp->enable_gpio = devm_gpiod_get(&pdev->dev, "nxp,enable",
|
|
GPIOD_OUT_HIGH);
|
|
if (IS_ERR(isp->enable_gpio)) {
|
|
ret = PTR_ERR(isp->enable_gpio);
|
|
dev_err(&pdev->dev, "Could not get reset gpio: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
if (pdev->dev.of_node)
|
|
isp->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
|
|
else
|
|
isp->phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
|
|
|
|
if (IS_ERR(isp->phy)) {
|
|
ret = PTR_ERR(isp->phy);
|
|
dev_err(&pdev->dev, "usb_get_phy failed\n");
|
|
goto fail0;
|
|
}
|
|
|
|
isp->dev = &pdev->dev;
|
|
platform_set_drvdata(pdev, isp);
|
|
|
|
isp1704_charger_set_power(isp, 1);
|
|
|
|
ret = isp1704_test_ulpi(isp);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "isp1704_test_ulpi failed\n");
|
|
goto fail1;
|
|
}
|
|
|
|
isp->psy_desc.name = "isp1704";
|
|
isp->psy_desc.type = POWER_SUPPLY_TYPE_USB;
|
|
isp->psy_desc.properties = power_props;
|
|
isp->psy_desc.num_properties = ARRAY_SIZE(power_props);
|
|
isp->psy_desc.get_property = isp1704_charger_get_property;
|
|
|
|
psy_cfg.drv_data = isp;
|
|
|
|
isp->psy = power_supply_register(isp->dev, &isp->psy_desc, &psy_cfg);
|
|
if (IS_ERR(isp->psy)) {
|
|
ret = PTR_ERR(isp->psy);
|
|
dev_err(&pdev->dev, "power_supply_register failed\n");
|
|
goto fail1;
|
|
}
|
|
|
|
/*
|
|
* REVISIT: using work in order to allow the usb notifications to be
|
|
* made atomically in the future.
|
|
*/
|
|
INIT_WORK(&isp->work, isp1704_charger_work);
|
|
|
|
isp->nb.notifier_call = isp1704_notifier_call;
|
|
|
|
ret = usb_register_notifier(isp->phy, &isp->nb);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "usb_register_notifier failed\n");
|
|
goto fail2;
|
|
}
|
|
|
|
dev_info(isp->dev, "registered with product id %s\n", isp->model);
|
|
|
|
/*
|
|
* Taking over the D+ pullup.
|
|
*
|
|
* FIXME: The device will be disconnected if it was already
|
|
* enumerated. The charger driver should be always loaded before any
|
|
* gadget is loaded.
|
|
*/
|
|
if (isp->phy->otg->gadget)
|
|
usb_gadget_disconnect(isp->phy->otg->gadget);
|
|
|
|
if (isp->phy->last_event == USB_EVENT_NONE)
|
|
isp1704_charger_set_power(isp, 0);
|
|
|
|
/* Detect charger if VBUS is valid (the cable was already plugged). */
|
|
if (isp->phy->last_event == USB_EVENT_VBUS &&
|
|
!isp->phy->otg->default_a)
|
|
schedule_work(&isp->work);
|
|
|
|
return 0;
|
|
fail2:
|
|
power_supply_unregister(isp->psy);
|
|
fail1:
|
|
isp1704_charger_set_power(isp, 0);
|
|
fail0:
|
|
dev_err(&pdev->dev, "failed to register isp1704 with error %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int isp1704_charger_remove(struct platform_device *pdev)
|
|
{
|
|
struct isp1704_charger *isp = platform_get_drvdata(pdev);
|
|
|
|
usb_unregister_notifier(isp->phy, &isp->nb);
|
|
power_supply_unregister(isp->psy);
|
|
isp1704_charger_set_power(isp, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id omap_isp1704_of_match[] = {
|
|
{ .compatible = "nxp,isp1704", },
|
|
{ .compatible = "nxp,isp1707", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, omap_isp1704_of_match);
|
|
#endif
|
|
|
|
static struct platform_driver isp1704_charger_driver = {
|
|
.driver = {
|
|
.name = "isp1704_charger",
|
|
.of_match_table = of_match_ptr(omap_isp1704_of_match),
|
|
},
|
|
.probe = isp1704_charger_probe,
|
|
.remove = isp1704_charger_remove,
|
|
};
|
|
|
|
module_platform_driver(isp1704_charger_driver);
|
|
|
|
MODULE_ALIAS("platform:isp1704_charger");
|
|
MODULE_AUTHOR("Nokia Corporation");
|
|
MODULE_DESCRIPTION("ISP170x USB Charger driver");
|
|
MODULE_LICENSE("GPL");
|