WSL2-Linux-Kernel/drivers/ieee1394/nodemgr.h

190 строки
5.9 KiB
C

/*
* Copyright (C) 2000 Andreas E. Bombe
* 2001 Ben Collins <bcollins@debian.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#ifndef _IEEE1394_NODEMGR_H
#define _IEEE1394_NODEMGR_H
#include <linux/device.h>
#include "csr1212.h"
#include "ieee1394_core.h"
#include "ieee1394_hotplug.h"
/* '1' '3' '9' '4' in ASCII */
#define IEEE1394_BUSID_MAGIC __constant_cpu_to_be32(0x31333934)
/* This is the start of a Node entry structure. It should be a stable API
* for which to gather info from the Node Manager about devices attached
* to the bus. */
struct bus_options {
u8 irmc; /* Iso Resource Manager Capable */
u8 cmc; /* Cycle Master Capable */
u8 isc; /* Iso Capable */
u8 bmc; /* Bus Master Capable */
u8 pmc; /* Power Manager Capable (PNP spec) */
u8 cyc_clk_acc; /* Cycle clock accuracy */
u8 max_rom; /* Maximum block read supported in the CSR */
u8 generation; /* Incremented when configrom changes */
u8 lnkspd; /* Link speed */
u16 max_rec; /* Maximum packet size node can receive */
};
#define UNIT_DIRECTORY_VENDOR_ID 0x01
#define UNIT_DIRECTORY_MODEL_ID 0x02
#define UNIT_DIRECTORY_SPECIFIER_ID 0x04
#define UNIT_DIRECTORY_VERSION 0x08
#define UNIT_DIRECTORY_HAS_LUN_DIRECTORY 0x10
#define UNIT_DIRECTORY_LUN_DIRECTORY 0x20
#define UNIT_DIRECTORY_HAS_LUN 0x40
/*
* A unit directory corresponds to a protocol supported by the
* node. If a node supports eg. IP/1394 and AV/C, its config rom has a
* unit directory for each of these protocols.
*/
struct unit_directory {
struct node_entry *ne; /* The node which this directory belongs to */
octlet_t address; /* Address of the unit directory on the node */
u8 flags; /* Indicates which entries were read */
quadlet_t vendor_id;
struct csr1212_keyval *vendor_name_kv;
const char *vendor_oui;
quadlet_t model_id;
struct csr1212_keyval *model_name_kv;
quadlet_t specifier_id;
quadlet_t version;
unsigned int id;
int ignore_driver;
int length; /* Number of quadlets */
struct device device;
struct class_device class_dev;
struct csr1212_keyval *ud_kv;
u32 lun; /* logical unit number immediate value */
};
struct node_entry {
u64 guid; /* GUID of this node */
u32 guid_vendor_id; /* Top 24bits of guid */
const char *guid_vendor_oui; /* OUI name of guid vendor id */
struct hpsb_host *host; /* Host this node is attached to */
nodeid_t nodeid; /* NodeID */
struct bus_options busopt; /* Bus Options */
int needs_probe;
unsigned int generation; /* Synced with hpsb generation */
/* The following is read from the config rom */
u32 vendor_id;
struct csr1212_keyval *vendor_name_kv;
const char *vendor_oui;
u32 capabilities;
struct hpsb_tlabel_pool *tpool;
struct device device;
struct class_device class_dev;
/* Means this node is not attached anymore */
int in_limbo;
struct csr1212_csr *csr;
};
struct hpsb_protocol_driver {
/* The name of the driver, e.g. SBP2 or IP1394 */
const char *name;
/*
* The device id table describing the protocols and/or devices
* supported by this driver. This is used by the nodemgr to
* decide if a driver could support a given node, but the
* probe function below can implement further protocol
* dependent or vendor dependent checking.
*/
struct ieee1394_device_id *id_table;
/*
* The update function is called when the node has just
* survived a bus reset, i.e. it is still present on the bus.
* However, it may be necessary to reestablish the connection
* or login into the node again, depending on the protocol. If the
* probe fails (returns non-zero), we unbind the driver from this
* device.
*/
int (*update)(struct unit_directory *ud);
/* Our LDM structure */
struct device_driver driver;
};
int hpsb_register_protocol(struct hpsb_protocol_driver *driver);
void hpsb_unregister_protocol(struct hpsb_protocol_driver *driver);
static inline int hpsb_node_entry_valid(struct node_entry *ne)
{
return ne->generation == get_hpsb_generation(ne->host);
}
/*
* This will fill in the given, pre-initialised hpsb_packet with the current
* information from the node entry (host, node ID, generation number). It will
* return false if the node owning the GUID is not accessible (and not modify the
* hpsb_packet) and return true otherwise.
*
* Note that packet sending may still fail in hpsb_send_packet if a bus reset
* happens while you are trying to set up the packet (due to obsolete generation
* number). It will at least reliably fail so that you don't accidentally and
* unknowingly send your packet to the wrong node.
*/
void hpsb_node_fill_packet(struct node_entry *ne, struct hpsb_packet *pkt);
int hpsb_node_read(struct node_entry *ne, u64 addr,
quadlet_t *buffer, size_t length);
int hpsb_node_write(struct node_entry *ne, u64 addr,
quadlet_t *buffer, size_t length);
int hpsb_node_lock(struct node_entry *ne, u64 addr,
int extcode, quadlet_t *data, quadlet_t arg);
/* Iterate the hosts, calling a given function with supplied data for each
* host. */
int nodemgr_for_each_host(void *__data, int (*cb)(struct hpsb_host *, void *));
int init_ieee1394_nodemgr(void);
void cleanup_ieee1394_nodemgr(void);
/* The template for a host device */
extern struct device nodemgr_dev_template_host;
/* Bus attributes we export */
extern struct bus_attribute *const fw_bus_attrs[];
#endif /* _IEEE1394_NODEMGR_H */