Stefan Sørensen 35e872ae63 dp83640: Program pulsewidth2 values of perout triggers 0 and 1 ... Periodic output triggers 0 and 1 of the dp83640 has a programmable duty-cycle which is controlled by the Pulsewidth2 field of the trigger data register. This field is not documented in the datasheet, but it is described in the "PHYTER Software Development Guide" section 3.1.4.1. Failing to set the field can result in unstable/no trigger output. Add programming of the Pulsewidth2 field, setting it to the same value as the Pulsewidth field for a 50% duty cycle. Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2014-07-01 18:52:53 -07:00
..
Kconfig	amd-xgbe: Configuration and build support	2014-06-05 15:26:51 -07:00
Makefile	amd-xgbe: Configuration and build support	2014-06-05 15:26:51 -07:00
amd-xgbe-phy.c	amd-xgbe: fix unused variable compilation warning in phylib driver	2014-06-11 00:13:16 -07:00
amd.c	phylib: Support registering a bunch of drivers	2012-07-09 00:10:56 -07:00
at803x.c	net: phy: at803x: fix coccinelle warnings	2014-06-22 17:16:02 -07:00
bcm7xxx.c	net: phy: bcm7xxx: properly clear AFE_RX_LP_COUNTER	2014-03-26 16:19:24 -04:00
bcm63xx.c	phy: bcm63xx: report Broadcom BCM63xx PHYs as internal	2013-05-27 22:42:50 -07:00
bcm87xx.c	net/phy/bcm87xx: Add MODULE_LICENSE("GPL") to GPL driver	2012-09-22 15:33:46 -04:00
broadcom.c	net: phy: broadcom: extract register definitions	2014-02-14 00:27:58 -05:00
cicada.c	net: phy: cicada: fix checkpath errors	2013-12-18 00:49:01 -05:00
davicom.c	net: phy: davicom: fix checkpath errors	2013-12-18 00:49:01 -05:00
dp83640.c	dp83640: Program pulsewidth2 values of perout triggers 0 and 1	2014-07-01 18:52:53 -07:00
dp83640_reg.h	…
et1011c.c	…
fixed.c	net: phy: extend fixed driver with fixed_phy_register()	2014-05-16 17:18:49 -04:00
icplus.c	net: phy: icplus: fix checkpath error	2013-12-18 00:49:02 -05:00
lxt.c	net: phy: lxt: fix checkpath errors	2013-12-18 00:49:02 -05:00
marvell.c	net: phy: marvell: provide genphy suspend/resume	2013-12-17 14:42:44 -05:00
mdio-bitbang.c	Revert "drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before mdiobus_free"	2012-11-14 22:32:15 -05:00
mdio-gpio.c	net: mdio-gpio: warn about missing bus alias id	2014-05-09 15:51:19 -04:00
mdio-moxart.c	drivers/net: delete non-required instances of include <linux/init.h>	2014-01-16 11:53:26 -08:00
mdio-mux-gpio.c	drivers/net: delete non-required instances of include <linux/init.h>	2014-01-16 11:53:26 -08:00
mdio-mux-mmioreg.c	drivers/net: delete non-required instances of include <linux/init.h>	2014-01-16 11:53:26 -08:00
mdio-mux.c	netdev/phy: skip disabled mdio-mux nodes	2012-08-20 02:16:00 -07:00
mdio-octeon.c	drivers/net: delete non-required instances of include <linux/init.h>	2014-01-16 11:53:26 -08:00
mdio-sun4i.c	net: sun4i: remove empty MDIO bus reset function	2014-03-28 01:38:02 -04:00
mdio_bus.c	net: of_mdio: add of_mdiobus_link_phydev()	2014-05-29 15:23:29 -07:00
micrel.c	ARM: i.MX6: Add OF configuration support for ksz9031	2014-05-07 16:51:09 -04:00
national.c	phy: Use pr_<level>	2012-06-11 16:58:24 -07:00
phy.c	net: phylib: add link_change_notify callback to phy device	2014-06-21 15:50:00 -07:00
phy_device.c	Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net	2014-05-24 00:32:30 -04:00
qsemi.c	…
realtek.c	net: phy: realtek: register/unregister multiple drivers properly	2014-06-11 15:17:27 -07:00
smsc.c	net/phy: Remove return value for void function	2014-04-23 15:28:05 -04:00
spi_ks8995.c	net: Micrel KSZ8864RMN 4-port managed switch support	2014-04-03 16:15:29 -04:00
ste10Xp.c	phylib: Support registering a bunch of drivers	2012-07-09 00:10:56 -07:00
vitesse.c	net/phy: Remove return value for void function	2014-04-23 15:28:05 -04:00