WSL2-Linux-Kernel/drivers/usb/gadget/function/f_obex.c

492 строки
12 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* f_obex.c -- USB CDC OBEX function driver
*
* Copyright (C) 2008 Nokia Corporation
* Contact: Felipe Balbi <felipe.balbi@nokia.com>
*
* Based on f_acm.c by Al Borchers and David Brownell.
*/
/* #define VERBOSE_DEBUG */
#include <linux/slab.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/module.h>
#include "u_serial.h"
/*
* This CDC OBEX function support just packages a TTY-ish byte stream.
* A user mode server will put it into "raw" mode and handle all the
* relevant protocol details ... this is just a kernel passthrough.
* When possible, we prevent gadget enumeration until that server is
* ready to handle the commands.
*/
struct f_obex {
struct gserial port;
u8 ctrl_id;
u8 data_id;
u8 cur_alt;
u8 port_num;
};
static inline struct f_obex *func_to_obex(struct usb_function *f)
{
return container_of(f, struct f_obex, port.func);
}
static inline struct f_obex *port_to_obex(struct gserial *p)
{
return container_of(p, struct f_obex, port);
}
/*-------------------------------------------------------------------------*/
#define OBEX_CTRL_IDX 0
#define OBEX_DATA_IDX 1
static struct usb_string obex_string_defs[] = {
[OBEX_CTRL_IDX].s = "CDC Object Exchange (OBEX)",
[OBEX_DATA_IDX].s = "CDC OBEX Data",
{ }, /* end of list */
};
static struct usb_gadget_strings obex_string_table = {
.language = 0x0409, /* en-US */
.strings = obex_string_defs,
};
static struct usb_gadget_strings *obex_strings[] = {
&obex_string_table,
NULL,
};
/*-------------------------------------------------------------------------*/
static struct usb_interface_descriptor obex_control_intf = {
.bLength = sizeof(obex_control_intf),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 0,
.bInterfaceClass = USB_CLASS_COMM,
.bInterfaceSubClass = USB_CDC_SUBCLASS_OBEX,
};
static struct usb_interface_descriptor obex_data_nop_intf = {
.bLength = sizeof(obex_data_nop_intf),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 1,
.bAlternateSetting = 0,
.bNumEndpoints = 0,
.bInterfaceClass = USB_CLASS_CDC_DATA,
};
static struct usb_interface_descriptor obex_data_intf = {
.bLength = sizeof(obex_data_intf),
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 2,
.bAlternateSetting = 1,
.bNumEndpoints = 2,
.bInterfaceClass = USB_CLASS_CDC_DATA,
};
static struct usb_cdc_header_desc obex_cdc_header_desc = {
.bLength = sizeof(obex_cdc_header_desc),
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubType = USB_CDC_HEADER_TYPE,
.bcdCDC = cpu_to_le16(0x0120),
};
static struct usb_cdc_union_desc obex_cdc_union_desc = {
.bLength = sizeof(obex_cdc_union_desc),
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubType = USB_CDC_UNION_TYPE,
.bMasterInterface0 = 1,
.bSlaveInterface0 = 2,
};
static struct usb_cdc_obex_desc obex_desc = {
.bLength = sizeof(obex_desc),
.bDescriptorType = USB_DT_CS_INTERFACE,
.bDescriptorSubType = USB_CDC_OBEX_TYPE,
.bcdVersion = cpu_to_le16(0x0100),
};
/* High-Speed Support */
static struct usb_endpoint_descriptor obex_hs_ep_out_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_OUT,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = cpu_to_le16(512),
};
static struct usb_endpoint_descriptor obex_hs_ep_in_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
.wMaxPacketSize = cpu_to_le16(512),
};
static struct usb_descriptor_header *hs_function[] = {
(struct usb_descriptor_header *) &obex_control_intf,
(struct usb_descriptor_header *) &obex_cdc_header_desc,
(struct usb_descriptor_header *) &obex_desc,
(struct usb_descriptor_header *) &obex_cdc_union_desc,
(struct usb_descriptor_header *) &obex_data_nop_intf,
(struct usb_descriptor_header *) &obex_data_intf,
(struct usb_descriptor_header *) &obex_hs_ep_in_desc,
(struct usb_descriptor_header *) &obex_hs_ep_out_desc,
NULL,
};
/* Full-Speed Support */
static struct usb_endpoint_descriptor obex_fs_ep_in_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
};
static struct usb_endpoint_descriptor obex_fs_ep_out_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_OUT,
.bmAttributes = USB_ENDPOINT_XFER_BULK,
};
static struct usb_descriptor_header *fs_function[] = {
(struct usb_descriptor_header *) &obex_control_intf,
(struct usb_descriptor_header *) &obex_cdc_header_desc,
(struct usb_descriptor_header *) &obex_desc,
(struct usb_descriptor_header *) &obex_cdc_union_desc,
(struct usb_descriptor_header *) &obex_data_nop_intf,
(struct usb_descriptor_header *) &obex_data_intf,
(struct usb_descriptor_header *) &obex_fs_ep_in_desc,
(struct usb_descriptor_header *) &obex_fs_ep_out_desc,
NULL,
};
/*-------------------------------------------------------------------------*/
static int obex_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
{
struct f_obex *obex = func_to_obex(f);
struct usb_composite_dev *cdev = f->config->cdev;
if (intf == obex->ctrl_id) {
if (alt != 0)
goto fail;
/* NOP */
dev_dbg(&cdev->gadget->dev,
"reset obex ttyGS%d control\n", obex->port_num);
} else if (intf == obex->data_id) {
if (alt > 1)
goto fail;
if (obex->port.in->enabled) {
dev_dbg(&cdev->gadget->dev,
"reset obex ttyGS%d\n", obex->port_num);
gserial_disconnect(&obex->port);
}
if (!obex->port.in->desc || !obex->port.out->desc) {
dev_dbg(&cdev->gadget->dev,
"init obex ttyGS%d\n", obex->port_num);
if (config_ep_by_speed(cdev->gadget, f,
obex->port.in) ||
config_ep_by_speed(cdev->gadget, f,
obex->port.out)) {
obex->port.out->desc = NULL;
obex->port.in->desc = NULL;
goto fail;
}
}
if (alt == 1) {
dev_dbg(&cdev->gadget->dev,
"activate obex ttyGS%d\n", obex->port_num);
gserial_connect(&obex->port, obex->port_num);
}
} else
goto fail;
obex->cur_alt = alt;
return 0;
fail:
return -EINVAL;
}
static int obex_get_alt(struct usb_function *f, unsigned intf)
{
struct f_obex *obex = func_to_obex(f);
return obex->cur_alt;
}
static void obex_disable(struct usb_function *f)
{
struct f_obex *obex = func_to_obex(f);
struct usb_composite_dev *cdev = f->config->cdev;
dev_dbg(&cdev->gadget->dev, "obex ttyGS%d disable\n", obex->port_num);
gserial_disconnect(&obex->port);
}
/*-------------------------------------------------------------------------*/
static void obex_connect(struct gserial *g)
{
struct f_obex *obex = port_to_obex(g);
struct usb_composite_dev *cdev = g->func.config->cdev;
int status;
status = usb_function_activate(&g->func);
if (status)
dev_dbg(&cdev->gadget->dev,
"obex ttyGS%d function activate --> %d\n",
obex->port_num, status);
}
static void obex_disconnect(struct gserial *g)
{
struct f_obex *obex = port_to_obex(g);
struct usb_composite_dev *cdev = g->func.config->cdev;
int status;
status = usb_function_deactivate(&g->func);
if (status)
dev_dbg(&cdev->gadget->dev,
"obex ttyGS%d function deactivate --> %d\n",
obex->port_num, status);
}
/*-------------------------------------------------------------------------*/
/* Some controllers can't support CDC OBEX ... */
static inline bool can_support_obex(struct usb_configuration *c)
{
/* Since the first interface is a NOP, we can ignore the
* issue of multi-interface support on most controllers.
*
* Altsettings are mandatory, however...
*/
if (!gadget_is_altset_supported(c->cdev->gadget))
return false;
/* everything else is *probably* fine ... */
return true;
}
static int obex_bind(struct usb_configuration *c, struct usb_function *f)
{
struct usb_composite_dev *cdev = c->cdev;
struct f_obex *obex = func_to_obex(f);
struct usb_string *us;
int status;
struct usb_ep *ep;
if (!can_support_obex(c))
return -EINVAL;
us = usb_gstrings_attach(cdev, obex_strings,
ARRAY_SIZE(obex_string_defs));
if (IS_ERR(us))
return PTR_ERR(us);
obex_control_intf.iInterface = us[OBEX_CTRL_IDX].id;
obex_data_nop_intf.iInterface = us[OBEX_DATA_IDX].id;
obex_data_intf.iInterface = us[OBEX_DATA_IDX].id;
/* allocate instance-specific interface IDs, and patch descriptors */
status = usb_interface_id(c, f);
if (status < 0)
goto fail;
obex->ctrl_id = status;
obex_control_intf.bInterfaceNumber = status;
obex_cdc_union_desc.bMasterInterface0 = status;
status = usb_interface_id(c, f);
if (status < 0)
goto fail;
obex->data_id = status;
obex_data_nop_intf.bInterfaceNumber = status;
obex_data_intf.bInterfaceNumber = status;
obex_cdc_union_desc.bSlaveInterface0 = status;
/* allocate instance-specific endpoints */
status = -ENODEV;
ep = usb_ep_autoconfig(cdev->gadget, &obex_fs_ep_in_desc);
if (!ep)
goto fail;
obex->port.in = ep;
ep = usb_ep_autoconfig(cdev->gadget, &obex_fs_ep_out_desc);
if (!ep)
goto fail;
obex->port.out = ep;
/* support all relevant hardware speeds... we expect that when
* hardware is dual speed, all bulk-capable endpoints work at
* both speeds
*/
obex_hs_ep_in_desc.bEndpointAddress =
obex_fs_ep_in_desc.bEndpointAddress;
obex_hs_ep_out_desc.bEndpointAddress =
obex_fs_ep_out_desc.bEndpointAddress;
status = usb_assign_descriptors(f, fs_function, hs_function, NULL,
NULL);
if (status)
goto fail;
dev_dbg(&cdev->gadget->dev, "obex ttyGS%d: %s speed IN/%s OUT/%s\n",
obex->port_num,
gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
obex->port.in->name, obex->port.out->name);
return 0;
fail:
ERROR(cdev, "%s/%p: can't bind, err %d\n", f->name, f, status);
return status;
}
static inline struct f_serial_opts *to_f_serial_opts(struct config_item *item)
{
return container_of(to_config_group(item), struct f_serial_opts,
func_inst.group);
}
static void obex_attr_release(struct config_item *item)
{
struct f_serial_opts *opts = to_f_serial_opts(item);
usb_put_function_instance(&opts->func_inst);
}
static struct configfs_item_operations obex_item_ops = {
.release = obex_attr_release,
};
static ssize_t f_obex_port_num_show(struct config_item *item, char *page)
{
return sprintf(page, "%u\n", to_f_serial_opts(item)->port_num);
}
CONFIGFS_ATTR_RO(f_obex_, port_num);
static struct configfs_attribute *acm_attrs[] = {
&f_obex_attr_port_num,
NULL,
};
static const struct config_item_type obex_func_type = {
.ct_item_ops = &obex_item_ops,
.ct_attrs = acm_attrs,
.ct_owner = THIS_MODULE,
};
static void obex_free_inst(struct usb_function_instance *f)
{
struct f_serial_opts *opts;
opts = container_of(f, struct f_serial_opts, func_inst);
gserial_free_line(opts->port_num);
kfree(opts);
}
static struct usb_function_instance *obex_alloc_inst(void)
{
struct f_serial_opts *opts;
int ret;
opts = kzalloc(sizeof(*opts), GFP_KERNEL);
if (!opts)
return ERR_PTR(-ENOMEM);
opts->func_inst.free_func_inst = obex_free_inst;
ret = gserial_alloc_line_no_console(&opts->port_num);
if (ret) {
kfree(opts);
return ERR_PTR(ret);
}
config_group_init_type_name(&opts->func_inst.group, "",
&obex_func_type);
return &opts->func_inst;
}
static void obex_free(struct usb_function *f)
{
struct f_obex *obex;
obex = func_to_obex(f);
kfree(obex);
}
static void obex_unbind(struct usb_configuration *c, struct usb_function *f)
{
usb_free_all_descriptors(f);
}
static struct usb_function *obex_alloc(struct usb_function_instance *fi)
{
struct f_obex *obex;
struct f_serial_opts *opts;
/* allocate and initialize one new instance */
obex = kzalloc(sizeof(*obex), GFP_KERNEL);
if (!obex)
return ERR_PTR(-ENOMEM);
opts = container_of(fi, struct f_serial_opts, func_inst);
obex->port_num = opts->port_num;
obex->port.connect = obex_connect;
obex->port.disconnect = obex_disconnect;
obex->port.func.name = "obex";
/* descriptors are per-instance copies */
obex->port.func.bind = obex_bind;
obex->port.func.unbind = obex_unbind;
obex->port.func.set_alt = obex_set_alt;
obex->port.func.get_alt = obex_get_alt;
obex->port.func.disable = obex_disable;
obex->port.func.free_func = obex_free;
obex->port.func.bind_deactivated = true;
return &obex->port.func;
}
DECLARE_USB_FUNCTION_INIT(obex, obex_alloc_inst, obex_alloc);
MODULE_AUTHOR("Felipe Balbi");
MODULE_LICENSE("GPL");