528 строки
14 KiB
C
528 строки
14 KiB
C
/*
|
|
* EHRPWM PWM driver
|
|
*
|
|
* Copyright (C) 2012 Texas Instruments, Inc. - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/io.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
|
|
#include "pwm-tipwmss.h"
|
|
|
|
/* EHRPWM registers and bits definitions */
|
|
|
|
/* Time base module registers */
|
|
#define TBCTL 0x00
|
|
#define TBPRD 0x0A
|
|
|
|
#define TBCTL_RUN_MASK (BIT(15) | BIT(14))
|
|
#define TBCTL_STOP_NEXT 0
|
|
#define TBCTL_STOP_ON_CYCLE BIT(14)
|
|
#define TBCTL_FREE_RUN (BIT(15) | BIT(14))
|
|
#define TBCTL_PRDLD_MASK BIT(3)
|
|
#define TBCTL_PRDLD_SHDW 0
|
|
#define TBCTL_PRDLD_IMDT BIT(3)
|
|
#define TBCTL_CLKDIV_MASK (BIT(12) | BIT(11) | BIT(10) | BIT(9) | \
|
|
BIT(8) | BIT(7))
|
|
#define TBCTL_CTRMODE_MASK (BIT(1) | BIT(0))
|
|
#define TBCTL_CTRMODE_UP 0
|
|
#define TBCTL_CTRMODE_DOWN BIT(0)
|
|
#define TBCTL_CTRMODE_UPDOWN BIT(1)
|
|
#define TBCTL_CTRMODE_FREEZE (BIT(1) | BIT(0))
|
|
|
|
#define TBCTL_HSPCLKDIV_SHIFT 7
|
|
#define TBCTL_CLKDIV_SHIFT 10
|
|
|
|
#define CLKDIV_MAX 7
|
|
#define HSPCLKDIV_MAX 7
|
|
#define PERIOD_MAX 0xFFFF
|
|
|
|
/* compare module registers */
|
|
#define CMPA 0x12
|
|
#define CMPB 0x14
|
|
|
|
/* Action qualifier module registers */
|
|
#define AQCTLA 0x16
|
|
#define AQCTLB 0x18
|
|
#define AQSFRC 0x1A
|
|
#define AQCSFRC 0x1C
|
|
|
|
#define AQCTL_CBU_MASK (BIT(9) | BIT(8))
|
|
#define AQCTL_CBU_FRCLOW BIT(8)
|
|
#define AQCTL_CBU_FRCHIGH BIT(9)
|
|
#define AQCTL_CBU_FRCTOGGLE (BIT(9) | BIT(8))
|
|
#define AQCTL_CAU_MASK (BIT(5) | BIT(4))
|
|
#define AQCTL_CAU_FRCLOW BIT(4)
|
|
#define AQCTL_CAU_FRCHIGH BIT(5)
|
|
#define AQCTL_CAU_FRCTOGGLE (BIT(5) | BIT(4))
|
|
#define AQCTL_PRD_MASK (BIT(3) | BIT(2))
|
|
#define AQCTL_PRD_FRCLOW BIT(2)
|
|
#define AQCTL_PRD_FRCHIGH BIT(3)
|
|
#define AQCTL_PRD_FRCTOGGLE (BIT(3) | BIT(2))
|
|
#define AQCTL_ZRO_MASK (BIT(1) | BIT(0))
|
|
#define AQCTL_ZRO_FRCLOW BIT(0)
|
|
#define AQCTL_ZRO_FRCHIGH BIT(1)
|
|
#define AQCTL_ZRO_FRCTOGGLE (BIT(1) | BIT(0))
|
|
|
|
#define AQCTL_CHANA_POLNORMAL (AQCTL_CAU_FRCLOW | AQCTL_PRD_FRCHIGH | \
|
|
AQCTL_ZRO_FRCHIGH)
|
|
#define AQCTL_CHANA_POLINVERSED (AQCTL_CAU_FRCHIGH | AQCTL_PRD_FRCLOW | \
|
|
AQCTL_ZRO_FRCLOW)
|
|
#define AQCTL_CHANB_POLNORMAL (AQCTL_CBU_FRCLOW | AQCTL_PRD_FRCHIGH | \
|
|
AQCTL_ZRO_FRCHIGH)
|
|
#define AQCTL_CHANB_POLINVERSED (AQCTL_CBU_FRCHIGH | AQCTL_PRD_FRCLOW | \
|
|
AQCTL_ZRO_FRCLOW)
|
|
|
|
#define AQSFRC_RLDCSF_MASK (BIT(7) | BIT(6))
|
|
#define AQSFRC_RLDCSF_ZRO 0
|
|
#define AQSFRC_RLDCSF_PRD BIT(6)
|
|
#define AQSFRC_RLDCSF_ZROPRD BIT(7)
|
|
#define AQSFRC_RLDCSF_IMDT (BIT(7) | BIT(6))
|
|
|
|
#define AQCSFRC_CSFB_MASK (BIT(3) | BIT(2))
|
|
#define AQCSFRC_CSFB_FRCDIS 0
|
|
#define AQCSFRC_CSFB_FRCLOW BIT(2)
|
|
#define AQCSFRC_CSFB_FRCHIGH BIT(3)
|
|
#define AQCSFRC_CSFB_DISSWFRC (BIT(3) | BIT(2))
|
|
#define AQCSFRC_CSFA_MASK (BIT(1) | BIT(0))
|
|
#define AQCSFRC_CSFA_FRCDIS 0
|
|
#define AQCSFRC_CSFA_FRCLOW BIT(0)
|
|
#define AQCSFRC_CSFA_FRCHIGH BIT(1)
|
|
#define AQCSFRC_CSFA_DISSWFRC (BIT(1) | BIT(0))
|
|
|
|
#define NUM_PWM_CHANNEL 2 /* EHRPWM channels */
|
|
|
|
struct ehrpwm_pwm_chip {
|
|
struct pwm_chip chip;
|
|
unsigned int clk_rate;
|
|
void __iomem *mmio_base;
|
|
unsigned long period_cycles[NUM_PWM_CHANNEL];
|
|
enum pwm_polarity polarity[NUM_PWM_CHANNEL];
|
|
struct clk *tbclk;
|
|
};
|
|
|
|
static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip)
|
|
{
|
|
return container_of(chip, struct ehrpwm_pwm_chip, chip);
|
|
}
|
|
|
|
static void ehrpwm_write(void *base, int offset, unsigned int val)
|
|
{
|
|
writew(val & 0xFFFF, base + offset);
|
|
}
|
|
|
|
static void ehrpwm_modify(void *base, int offset,
|
|
unsigned short mask, unsigned short val)
|
|
{
|
|
unsigned short regval;
|
|
|
|
regval = readw(base + offset);
|
|
regval &= ~mask;
|
|
regval |= val & mask;
|
|
writew(regval, base + offset);
|
|
}
|
|
|
|
/**
|
|
* set_prescale_div - Set up the prescaler divider function
|
|
* @rqst_prescaler: prescaler value min
|
|
* @prescale_div: prescaler value set
|
|
* @tb_clk_div: Time Base Control prescaler bits
|
|
*/
|
|
static int set_prescale_div(unsigned long rqst_prescaler,
|
|
unsigned short *prescale_div, unsigned short *tb_clk_div)
|
|
{
|
|
unsigned int clkdiv, hspclkdiv;
|
|
|
|
for (clkdiv = 0; clkdiv <= CLKDIV_MAX; clkdiv++) {
|
|
for (hspclkdiv = 0; hspclkdiv <= HSPCLKDIV_MAX; hspclkdiv++) {
|
|
|
|
/*
|
|
* calculations for prescaler value :
|
|
* prescale_div = HSPCLKDIVIDER * CLKDIVIDER.
|
|
* HSPCLKDIVIDER = 2 ** hspclkdiv
|
|
* CLKDIVIDER = (1), if clkdiv == 0 *OR*
|
|
* (2 * clkdiv), if clkdiv != 0
|
|
*
|
|
* Configure prescale_div value such that period
|
|
* register value is less than 65535.
|
|
*/
|
|
|
|
*prescale_div = (1 << clkdiv) *
|
|
(hspclkdiv ? (hspclkdiv * 2) : 1);
|
|
if (*prescale_div > rqst_prescaler) {
|
|
*tb_clk_div = (clkdiv << TBCTL_CLKDIV_SHIFT) |
|
|
(hspclkdiv << TBCTL_HSPCLKDIV_SHIFT);
|
|
return 0;
|
|
}
|
|
}
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
static void configure_polarity(struct ehrpwm_pwm_chip *pc, int chan)
|
|
{
|
|
int aqctl_reg;
|
|
unsigned short aqctl_val, aqctl_mask;
|
|
|
|
/*
|
|
* Configure PWM output to HIGH/LOW level on counter
|
|
* reaches compare register value and LOW/HIGH level
|
|
* on counter value reaches period register value and
|
|
* zero value on counter
|
|
*/
|
|
if (chan == 1) {
|
|
aqctl_reg = AQCTLB;
|
|
aqctl_mask = AQCTL_CBU_MASK;
|
|
|
|
if (pc->polarity[chan] == PWM_POLARITY_INVERSED)
|
|
aqctl_val = AQCTL_CHANB_POLINVERSED;
|
|
else
|
|
aqctl_val = AQCTL_CHANB_POLNORMAL;
|
|
} else {
|
|
aqctl_reg = AQCTLA;
|
|
aqctl_mask = AQCTL_CAU_MASK;
|
|
|
|
if (pc->polarity[chan] == PWM_POLARITY_INVERSED)
|
|
aqctl_val = AQCTL_CHANA_POLINVERSED;
|
|
else
|
|
aqctl_val = AQCTL_CHANA_POLNORMAL;
|
|
}
|
|
|
|
aqctl_mask |= AQCTL_PRD_MASK | AQCTL_ZRO_MASK;
|
|
ehrpwm_modify(pc->mmio_base, aqctl_reg, aqctl_mask, aqctl_val);
|
|
}
|
|
|
|
/*
|
|
* period_ns = 10^9 * (ps_divval * period_cycles) / PWM_CLK_RATE
|
|
* duty_ns = 10^9 * (ps_divval * duty_cycles) / PWM_CLK_RATE
|
|
*/
|
|
static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
int duty_ns, int period_ns)
|
|
{
|
|
struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
|
|
unsigned long long c;
|
|
unsigned long period_cycles, duty_cycles;
|
|
unsigned short ps_divval, tb_divval;
|
|
int i, cmp_reg;
|
|
|
|
if (period_ns > NSEC_PER_SEC)
|
|
return -ERANGE;
|
|
|
|
c = pc->clk_rate;
|
|
c = c * period_ns;
|
|
do_div(c, NSEC_PER_SEC);
|
|
period_cycles = (unsigned long)c;
|
|
|
|
if (period_cycles < 1) {
|
|
period_cycles = 1;
|
|
duty_cycles = 1;
|
|
} else {
|
|
c = pc->clk_rate;
|
|
c = c * duty_ns;
|
|
do_div(c, NSEC_PER_SEC);
|
|
duty_cycles = (unsigned long)c;
|
|
}
|
|
|
|
/*
|
|
* Period values should be same for multiple PWM channels as IP uses
|
|
* same period register for multiple channels.
|
|
*/
|
|
for (i = 0; i < NUM_PWM_CHANNEL; i++) {
|
|
if (pc->period_cycles[i] &&
|
|
(pc->period_cycles[i] != period_cycles)) {
|
|
/*
|
|
* Allow channel to reconfigure period if no other
|
|
* channels being configured.
|
|
*/
|
|
if (i == pwm->hwpwm)
|
|
continue;
|
|
|
|
dev_err(chip->dev, "Period value conflicts with channel %d\n",
|
|
i);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
pc->period_cycles[pwm->hwpwm] = period_cycles;
|
|
|
|
/* Configure clock prescaler to support Low frequency PWM wave */
|
|
if (set_prescale_div(period_cycles/PERIOD_MAX, &ps_divval,
|
|
&tb_divval)) {
|
|
dev_err(chip->dev, "Unsupported values\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
pm_runtime_get_sync(chip->dev);
|
|
|
|
/* Update clock prescaler values */
|
|
ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_CLKDIV_MASK, tb_divval);
|
|
|
|
/* Update period & duty cycle with presacler division */
|
|
period_cycles = period_cycles / ps_divval;
|
|
duty_cycles = duty_cycles / ps_divval;
|
|
|
|
/* Configure shadow loading on Period register */
|
|
ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_PRDLD_MASK, TBCTL_PRDLD_SHDW);
|
|
|
|
ehrpwm_write(pc->mmio_base, TBPRD, period_cycles);
|
|
|
|
/* Configure ehrpwm counter for up-count mode */
|
|
ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_CTRMODE_MASK,
|
|
TBCTL_CTRMODE_UP);
|
|
|
|
if (pwm->hwpwm == 1)
|
|
/* Channel 1 configured with compare B register */
|
|
cmp_reg = CMPB;
|
|
else
|
|
/* Channel 0 configured with compare A register */
|
|
cmp_reg = CMPA;
|
|
|
|
ehrpwm_write(pc->mmio_base, cmp_reg, duty_cycles);
|
|
|
|
pm_runtime_put_sync(chip->dev);
|
|
return 0;
|
|
}
|
|
|
|
static int ehrpwm_pwm_set_polarity(struct pwm_chip *chip,
|
|
struct pwm_device *pwm, enum pwm_polarity polarity)
|
|
{
|
|
struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
|
|
|
|
/* Configuration of polarity in hardware delayed, do at enable */
|
|
pc->polarity[pwm->hwpwm] = polarity;
|
|
return 0;
|
|
}
|
|
|
|
static int ehrpwm_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
|
|
unsigned short aqcsfrc_val, aqcsfrc_mask;
|
|
|
|
/* Leave clock enabled on enabling PWM */
|
|
pm_runtime_get_sync(chip->dev);
|
|
|
|
/* Disabling Action Qualifier on PWM output */
|
|
if (pwm->hwpwm) {
|
|
aqcsfrc_val = AQCSFRC_CSFB_FRCDIS;
|
|
aqcsfrc_mask = AQCSFRC_CSFB_MASK;
|
|
} else {
|
|
aqcsfrc_val = AQCSFRC_CSFA_FRCDIS;
|
|
aqcsfrc_mask = AQCSFRC_CSFA_MASK;
|
|
}
|
|
|
|
/* Changes to shadow mode */
|
|
ehrpwm_modify(pc->mmio_base, AQSFRC, AQSFRC_RLDCSF_MASK,
|
|
AQSFRC_RLDCSF_ZRO);
|
|
|
|
ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val);
|
|
|
|
/* Channels polarity can be configured from action qualifier module */
|
|
configure_polarity(pc, pwm->hwpwm);
|
|
|
|
/* Enable TBCLK before enabling PWM device */
|
|
clk_enable(pc->tbclk);
|
|
|
|
/* Enable time counter for free_run */
|
|
ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_FREE_RUN);
|
|
return 0;
|
|
}
|
|
|
|
static void ehrpwm_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
|
|
unsigned short aqcsfrc_val, aqcsfrc_mask;
|
|
|
|
/* Action Qualifier puts PWM output low forcefully */
|
|
if (pwm->hwpwm) {
|
|
aqcsfrc_val = AQCSFRC_CSFB_FRCLOW;
|
|
aqcsfrc_mask = AQCSFRC_CSFB_MASK;
|
|
} else {
|
|
aqcsfrc_val = AQCSFRC_CSFA_FRCLOW;
|
|
aqcsfrc_mask = AQCSFRC_CSFA_MASK;
|
|
}
|
|
|
|
/*
|
|
* Changes to immediate action on Action Qualifier. This puts
|
|
* Action Qualifier control on PWM output from next TBCLK
|
|
*/
|
|
ehrpwm_modify(pc->mmio_base, AQSFRC, AQSFRC_RLDCSF_MASK,
|
|
AQSFRC_RLDCSF_IMDT);
|
|
|
|
ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val);
|
|
|
|
/* Disabling TBCLK on PWM disable */
|
|
clk_disable(pc->tbclk);
|
|
|
|
/* Stop Time base counter */
|
|
ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_STOP_NEXT);
|
|
|
|
/* Disable clock on PWM disable */
|
|
pm_runtime_put_sync(chip->dev);
|
|
}
|
|
|
|
static void ehrpwm_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip);
|
|
|
|
if (test_bit(PWMF_ENABLED, &pwm->flags)) {
|
|
dev_warn(chip->dev, "Removing PWM device without disabling\n");
|
|
pm_runtime_put_sync(chip->dev);
|
|
}
|
|
|
|
/* set period value to zero on free */
|
|
pc->period_cycles[pwm->hwpwm] = 0;
|
|
}
|
|
|
|
static const struct pwm_ops ehrpwm_pwm_ops = {
|
|
.free = ehrpwm_pwm_free,
|
|
.config = ehrpwm_pwm_config,
|
|
.set_polarity = ehrpwm_pwm_set_polarity,
|
|
.enable = ehrpwm_pwm_enable,
|
|
.disable = ehrpwm_pwm_disable,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const struct of_device_id ehrpwm_of_match[] = {
|
|
{ .compatible = "ti,am33xx-ehrpwm" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ehrpwm_of_match);
|
|
|
|
static int __devinit ehrpwm_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
struct resource *r;
|
|
struct clk *clk;
|
|
struct ehrpwm_pwm_chip *pc;
|
|
u16 status;
|
|
struct pinctrl *pinctrl;
|
|
|
|
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
|
|
if (IS_ERR(pinctrl))
|
|
dev_warn(&pdev->dev, "unable to select pin group\n");
|
|
|
|
pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
|
|
if (!pc) {
|
|
dev_err(&pdev->dev, "failed to allocate memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
clk = devm_clk_get(&pdev->dev, "fck");
|
|
if (IS_ERR(clk)) {
|
|
dev_err(&pdev->dev, "failed to get clock\n");
|
|
return PTR_ERR(clk);
|
|
}
|
|
|
|
pc->clk_rate = clk_get_rate(clk);
|
|
if (!pc->clk_rate) {
|
|
dev_err(&pdev->dev, "failed to get clock rate\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
pc->chip.dev = &pdev->dev;
|
|
pc->chip.ops = &ehrpwm_pwm_ops;
|
|
pc->chip.of_xlate = of_pwm_xlate_with_flags;
|
|
pc->chip.of_pwm_n_cells = 3;
|
|
pc->chip.base = -1;
|
|
pc->chip.npwm = NUM_PWM_CHANNEL;
|
|
|
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!r) {
|
|
dev_err(&pdev->dev, "no memory resource defined\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
pc->mmio_base = devm_request_and_ioremap(&pdev->dev, r);
|
|
if (!pc->mmio_base)
|
|
return -EADDRNOTAVAIL;
|
|
|
|
/* Acquire tbclk for Time Base EHRPWM submodule */
|
|
pc->tbclk = devm_clk_get(&pdev->dev, "tbclk");
|
|
if (IS_ERR(pc->tbclk)) {
|
|
dev_err(&pdev->dev, "Failed to get tbclk\n");
|
|
return PTR_ERR(pc->tbclk);
|
|
}
|
|
|
|
ret = pwmchip_add(&pc->chip);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
pm_runtime_enable(&pdev->dev);
|
|
pm_runtime_get_sync(&pdev->dev);
|
|
|
|
status = pwmss_submodule_state_change(pdev->dev.parent,
|
|
PWMSS_EPWMCLK_EN);
|
|
if (!(status & PWMSS_EPWMCLK_EN_ACK)) {
|
|
dev_err(&pdev->dev, "PWMSS config space clock enable failed\n");
|
|
ret = -EINVAL;
|
|
goto pwmss_clk_failure;
|
|
}
|
|
|
|
pm_runtime_put_sync(&pdev->dev);
|
|
|
|
platform_set_drvdata(pdev, pc);
|
|
return 0;
|
|
|
|
pwmss_clk_failure:
|
|
pm_runtime_put_sync(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
pwmchip_remove(&pc->chip);
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit ehrpwm_pwm_remove(struct platform_device *pdev)
|
|
{
|
|
struct ehrpwm_pwm_chip *pc = platform_get_drvdata(pdev);
|
|
|
|
pm_runtime_get_sync(&pdev->dev);
|
|
/*
|
|
* Due to hardware misbehaviour, acknowledge of the stop_req
|
|
* is missing. Hence checking of the status bit skipped.
|
|
*/
|
|
pwmss_submodule_state_change(pdev->dev.parent, PWMSS_EPWMCLK_STOP_REQ);
|
|
pm_runtime_put_sync(&pdev->dev);
|
|
|
|
pm_runtime_put_sync(&pdev->dev);
|
|
pm_runtime_disable(&pdev->dev);
|
|
return pwmchip_remove(&pc->chip);
|
|
}
|
|
|
|
static struct platform_driver ehrpwm_pwm_driver = {
|
|
.driver = {
|
|
.name = "ehrpwm",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = ehrpwm_of_match,
|
|
},
|
|
.probe = ehrpwm_pwm_probe,
|
|
.remove = __devexit_p(ehrpwm_pwm_remove),
|
|
};
|
|
|
|
module_platform_driver(ehrpwm_pwm_driver);
|
|
|
|
MODULE_DESCRIPTION("EHRPWM PWM driver");
|
|
MODULE_AUTHOR("Texas Instruments");
|
|
MODULE_LICENSE("GPL");
|