1903 строки
56 KiB
C
1903 строки
56 KiB
C
/*
|
|
* Copyright (c) 2010 Broadcom Corporation
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
|
|
* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
|
|
* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
|
|
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#ifndef _BRCM_D11_H_
|
|
#define _BRCM_D11_H_
|
|
|
|
#include <linux/ieee80211.h>
|
|
|
|
#include <defs.h>
|
|
#include "pub.h"
|
|
#include "dma.h"
|
|
|
|
/* RX FIFO numbers */
|
|
#define RX_FIFO 0 /* data and ctl frames */
|
|
#define RX_TXSTATUS_FIFO 3 /* RX fifo for tx status packages */
|
|
|
|
/* TX FIFO numbers using WME Access Category */
|
|
#define TX_AC_BK_FIFO 0 /* Background TX FIFO */
|
|
#define TX_AC_BE_FIFO 1 /* Best-Effort TX FIFO */
|
|
#define TX_AC_VI_FIFO 2 /* Video TX FIFO */
|
|
#define TX_AC_VO_FIFO 3 /* Voice TX FIFO */
|
|
#define TX_BCMC_FIFO 4 /* Broadcast/Multicast TX FIFO */
|
|
#define TX_ATIM_FIFO 5 /* TX fifo for ATIM window info */
|
|
|
|
/* Addr is byte address used by SW; offset is word offset used by uCode */
|
|
|
|
/* Per AC TX limit settings */
|
|
#define M_AC_TXLMT_BASE_ADDR (0x180 * 2)
|
|
#define M_AC_TXLMT_ADDR(_ac) (M_AC_TXLMT_BASE_ADDR + (2 * (_ac)))
|
|
|
|
/* Legacy TX FIFO numbers */
|
|
#define TX_DATA_FIFO TX_AC_BE_FIFO
|
|
#define TX_CTL_FIFO TX_AC_VO_FIFO
|
|
|
|
#define WL_RSSI_ANT_MAX 4 /* max possible rx antennas */
|
|
|
|
struct intctrlregs {
|
|
u32 intstatus;
|
|
u32 intmask;
|
|
};
|
|
|
|
/* PIO structure,
|
|
* support two PIO format: 2 bytes access and 4 bytes access
|
|
* basic FIFO register set is per channel(transmit or receive)
|
|
* a pair of channels is defined for convenience
|
|
*/
|
|
/* 2byte-wide pio register set per channel(xmt or rcv) */
|
|
struct pio2regs {
|
|
u16 fifocontrol;
|
|
u16 fifodata;
|
|
u16 fifofree; /* only valid in xmt channel, not in rcv channel */
|
|
u16 PAD;
|
|
};
|
|
|
|
/* a pair of pio channels(tx and rx) */
|
|
struct pio2regp {
|
|
struct pio2regs tx;
|
|
struct pio2regs rx;
|
|
};
|
|
|
|
/* 4byte-wide pio register set per channel(xmt or rcv) */
|
|
struct pio4regs {
|
|
u32 fifocontrol;
|
|
u32 fifodata;
|
|
};
|
|
|
|
/* a pair of pio channels(tx and rx) */
|
|
struct pio4regp {
|
|
struct pio4regs tx;
|
|
struct pio4regs rx;
|
|
};
|
|
|
|
/* read: 32-bit register that can be read as 32-bit or as 2 16-bit
|
|
* write: only low 16b-it half can be written
|
|
*/
|
|
union pmqreg {
|
|
u32 pmqhostdata; /* read only! */
|
|
struct {
|
|
u16 pmqctrlstatus; /* read/write */
|
|
u16 PAD;
|
|
} w;
|
|
};
|
|
|
|
struct fifo64 {
|
|
struct dma64regs dmaxmt; /* dma tx */
|
|
struct pio4regs piotx; /* pio tx */
|
|
struct dma64regs dmarcv; /* dma rx */
|
|
struct pio4regs piorx; /* pio rx */
|
|
};
|
|
|
|
/*
|
|
* Host Interface Registers
|
|
*/
|
|
struct d11regs {
|
|
/* Device Control ("semi-standard host registers") */
|
|
u32 PAD[3]; /* 0x0 - 0x8 */
|
|
u32 biststatus; /* 0xC */
|
|
u32 biststatus2; /* 0x10 */
|
|
u32 PAD; /* 0x14 */
|
|
u32 gptimer; /* 0x18 */
|
|
u32 usectimer; /* 0x1c *//* for corerev >= 26 */
|
|
|
|
/* Interrupt Control *//* 0x20 */
|
|
struct intctrlregs intctrlregs[8];
|
|
|
|
u32 PAD[40]; /* 0x60 - 0xFC */
|
|
|
|
u32 intrcvlazy[4]; /* 0x100 - 0x10C */
|
|
|
|
u32 PAD[4]; /* 0x110 - 0x11c */
|
|
|
|
u32 maccontrol; /* 0x120 */
|
|
u32 maccommand; /* 0x124 */
|
|
u32 macintstatus; /* 0x128 */
|
|
u32 macintmask; /* 0x12C */
|
|
|
|
/* Transmit Template Access */
|
|
u32 tplatewrptr; /* 0x130 */
|
|
u32 tplatewrdata; /* 0x134 */
|
|
u32 PAD[2]; /* 0x138 - 0x13C */
|
|
|
|
/* PMQ registers */
|
|
union pmqreg pmqreg; /* 0x140 */
|
|
u32 pmqpatl; /* 0x144 */
|
|
u32 pmqpath; /* 0x148 */
|
|
u32 PAD; /* 0x14C */
|
|
|
|
u32 chnstatus; /* 0x150 */
|
|
u32 psmdebug; /* 0x154 */
|
|
u32 phydebug; /* 0x158 */
|
|
u32 machwcap; /* 0x15C */
|
|
|
|
/* Extended Internal Objects */
|
|
u32 objaddr; /* 0x160 */
|
|
u32 objdata; /* 0x164 */
|
|
u32 PAD[2]; /* 0x168 - 0x16c */
|
|
|
|
u32 frmtxstatus; /* 0x170 */
|
|
u32 frmtxstatus2; /* 0x174 */
|
|
u32 PAD[2]; /* 0x178 - 0x17c */
|
|
|
|
/* TSF host access */
|
|
u32 tsf_timerlow; /* 0x180 */
|
|
u32 tsf_timerhigh; /* 0x184 */
|
|
u32 tsf_cfprep; /* 0x188 */
|
|
u32 tsf_cfpstart; /* 0x18c */
|
|
u32 tsf_cfpmaxdur32; /* 0x190 */
|
|
u32 PAD[3]; /* 0x194 - 0x19c */
|
|
|
|
u32 maccontrol1; /* 0x1a0 */
|
|
u32 machwcap1; /* 0x1a4 */
|
|
u32 PAD[14]; /* 0x1a8 - 0x1dc */
|
|
|
|
/* Clock control and hardware workarounds*/
|
|
u32 clk_ctl_st; /* 0x1e0 */
|
|
u32 hw_war;
|
|
u32 d11_phypllctl; /* the phypll request/avail bits are
|
|
* moved to clk_ctl_st
|
|
*/
|
|
u32 PAD[5]; /* 0x1ec - 0x1fc */
|
|
|
|
/* 0x200-0x37F dma/pio registers */
|
|
struct fifo64 fifo64regs[6];
|
|
|
|
/* FIFO diagnostic port access */
|
|
struct dma32diag dmafifo; /* 0x380 - 0x38C */
|
|
|
|
u32 aggfifocnt; /* 0x390 */
|
|
u32 aggfifodata; /* 0x394 */
|
|
u32 PAD[16]; /* 0x398 - 0x3d4 */
|
|
u16 radioregaddr; /* 0x3d8 */
|
|
u16 radioregdata; /* 0x3da */
|
|
|
|
/*
|
|
* time delay between the change on rf disable input and
|
|
* radio shutdown
|
|
*/
|
|
u32 rfdisabledly; /* 0x3DC */
|
|
|
|
/* PHY register access */
|
|
u16 phyversion; /* 0x3e0 - 0x0 */
|
|
u16 phybbconfig; /* 0x3e2 - 0x1 */
|
|
u16 phyadcbias; /* 0x3e4 - 0x2 Bphy only */
|
|
u16 phyanacore; /* 0x3e6 - 0x3 pwwrdwn on aphy */
|
|
u16 phyrxstatus0; /* 0x3e8 - 0x4 */
|
|
u16 phyrxstatus1; /* 0x3ea - 0x5 */
|
|
u16 phycrsth; /* 0x3ec - 0x6 */
|
|
u16 phytxerror; /* 0x3ee - 0x7 */
|
|
u16 phychannel; /* 0x3f0 - 0x8 */
|
|
u16 PAD[1]; /* 0x3f2 - 0x9 */
|
|
u16 phytest; /* 0x3f4 - 0xa */
|
|
u16 phy4waddr; /* 0x3f6 - 0xb */
|
|
u16 phy4wdatahi; /* 0x3f8 - 0xc */
|
|
u16 phy4wdatalo; /* 0x3fa - 0xd */
|
|
u16 phyregaddr; /* 0x3fc - 0xe */
|
|
u16 phyregdata; /* 0x3fe - 0xf */
|
|
|
|
/* IHR *//* 0x400 - 0x7FE */
|
|
|
|
/* RXE Block */
|
|
u16 PAD[3]; /* 0x400 - 0x406 */
|
|
u16 rcv_fifo_ctl; /* 0x406 */
|
|
u16 PAD; /* 0x408 - 0x40a */
|
|
u16 rcv_frm_cnt; /* 0x40a */
|
|
u16 PAD[4]; /* 0x40a - 0x414 */
|
|
u16 rssi; /* 0x414 */
|
|
u16 PAD[5]; /* 0x414 - 0x420 */
|
|
u16 rcm_ctl; /* 0x420 */
|
|
u16 rcm_mat_data; /* 0x422 */
|
|
u16 rcm_mat_mask; /* 0x424 */
|
|
u16 rcm_mat_dly; /* 0x426 */
|
|
u16 rcm_cond_mask_l; /* 0x428 */
|
|
u16 rcm_cond_mask_h; /* 0x42A */
|
|
u16 rcm_cond_dly; /* 0x42C */
|
|
u16 PAD[1]; /* 0x42E */
|
|
u16 ext_ihr_addr; /* 0x430 */
|
|
u16 ext_ihr_data; /* 0x432 */
|
|
u16 rxe_phyrs_2; /* 0x434 */
|
|
u16 rxe_phyrs_3; /* 0x436 */
|
|
u16 phy_mode; /* 0x438 */
|
|
u16 rcmta_ctl; /* 0x43a */
|
|
u16 rcmta_size; /* 0x43c */
|
|
u16 rcmta_addr0; /* 0x43e */
|
|
u16 rcmta_addr1; /* 0x440 */
|
|
u16 rcmta_addr2; /* 0x442 */
|
|
u16 PAD[30]; /* 0x444 - 0x480 */
|
|
|
|
/* PSM Block *//* 0x480 - 0x500 */
|
|
|
|
u16 PAD; /* 0x480 */
|
|
u16 psm_maccontrol_h; /* 0x482 */
|
|
u16 psm_macintstatus_l; /* 0x484 */
|
|
u16 psm_macintstatus_h; /* 0x486 */
|
|
u16 psm_macintmask_l; /* 0x488 */
|
|
u16 psm_macintmask_h; /* 0x48A */
|
|
u16 PAD; /* 0x48C */
|
|
u16 psm_maccommand; /* 0x48E */
|
|
u16 psm_brc; /* 0x490 */
|
|
u16 psm_phy_hdr_param; /* 0x492 */
|
|
u16 psm_postcard; /* 0x494 */
|
|
u16 psm_pcard_loc_l; /* 0x496 */
|
|
u16 psm_pcard_loc_h; /* 0x498 */
|
|
u16 psm_gpio_in; /* 0x49A */
|
|
u16 psm_gpio_out; /* 0x49C */
|
|
u16 psm_gpio_oe; /* 0x49E */
|
|
|
|
u16 psm_bred_0; /* 0x4A0 */
|
|
u16 psm_bred_1; /* 0x4A2 */
|
|
u16 psm_bred_2; /* 0x4A4 */
|
|
u16 psm_bred_3; /* 0x4A6 */
|
|
u16 psm_brcl_0; /* 0x4A8 */
|
|
u16 psm_brcl_1; /* 0x4AA */
|
|
u16 psm_brcl_2; /* 0x4AC */
|
|
u16 psm_brcl_3; /* 0x4AE */
|
|
u16 psm_brpo_0; /* 0x4B0 */
|
|
u16 psm_brpo_1; /* 0x4B2 */
|
|
u16 psm_brpo_2; /* 0x4B4 */
|
|
u16 psm_brpo_3; /* 0x4B6 */
|
|
u16 psm_brwk_0; /* 0x4B8 */
|
|
u16 psm_brwk_1; /* 0x4BA */
|
|
u16 psm_brwk_2; /* 0x4BC */
|
|
u16 psm_brwk_3; /* 0x4BE */
|
|
|
|
u16 psm_base_0; /* 0x4C0 */
|
|
u16 psm_base_1; /* 0x4C2 */
|
|
u16 psm_base_2; /* 0x4C4 */
|
|
u16 psm_base_3; /* 0x4C6 */
|
|
u16 psm_base_4; /* 0x4C8 */
|
|
u16 psm_base_5; /* 0x4CA */
|
|
u16 psm_base_6; /* 0x4CC */
|
|
u16 psm_pc_reg_0; /* 0x4CE */
|
|
u16 psm_pc_reg_1; /* 0x4D0 */
|
|
u16 psm_pc_reg_2; /* 0x4D2 */
|
|
u16 psm_pc_reg_3; /* 0x4D4 */
|
|
u16 PAD[0xD]; /* 0x4D6 - 0x4DE */
|
|
u16 psm_corectlsts; /* 0x4f0 *//* Corerev >= 13 */
|
|
u16 PAD[0x7]; /* 0x4f2 - 0x4fE */
|
|
|
|
/* TXE0 Block *//* 0x500 - 0x580 */
|
|
u16 txe_ctl; /* 0x500 */
|
|
u16 txe_aux; /* 0x502 */
|
|
u16 txe_ts_loc; /* 0x504 */
|
|
u16 txe_time_out; /* 0x506 */
|
|
u16 txe_wm_0; /* 0x508 */
|
|
u16 txe_wm_1; /* 0x50A */
|
|
u16 txe_phyctl; /* 0x50C */
|
|
u16 txe_status; /* 0x50E */
|
|
u16 txe_mmplcp0; /* 0x510 */
|
|
u16 txe_mmplcp1; /* 0x512 */
|
|
u16 txe_phyctl1; /* 0x514 */
|
|
|
|
u16 PAD[0x05]; /* 0x510 - 0x51E */
|
|
|
|
/* Transmit control */
|
|
u16 xmtfifodef; /* 0x520 */
|
|
u16 xmtfifo_frame_cnt; /* 0x522 *//* Corerev >= 16 */
|
|
u16 xmtfifo_byte_cnt; /* 0x524 *//* Corerev >= 16 */
|
|
u16 xmtfifo_head; /* 0x526 *//* Corerev >= 16 */
|
|
u16 xmtfifo_rd_ptr; /* 0x528 *//* Corerev >= 16 */
|
|
u16 xmtfifo_wr_ptr; /* 0x52A *//* Corerev >= 16 */
|
|
u16 xmtfifodef1; /* 0x52C *//* Corerev >= 16 */
|
|
|
|
u16 PAD[0x09]; /* 0x52E - 0x53E */
|
|
|
|
u16 xmtfifocmd; /* 0x540 */
|
|
u16 xmtfifoflush; /* 0x542 */
|
|
u16 xmtfifothresh; /* 0x544 */
|
|
u16 xmtfifordy; /* 0x546 */
|
|
u16 xmtfifoprirdy; /* 0x548 */
|
|
u16 xmtfiforqpri; /* 0x54A */
|
|
u16 xmttplatetxptr; /* 0x54C */
|
|
u16 PAD; /* 0x54E */
|
|
u16 xmttplateptr; /* 0x550 */
|
|
u16 smpl_clct_strptr; /* 0x552 *//* Corerev >= 22 */
|
|
u16 smpl_clct_stpptr; /* 0x554 *//* Corerev >= 22 */
|
|
u16 smpl_clct_curptr; /* 0x556 *//* Corerev >= 22 */
|
|
u16 PAD[0x04]; /* 0x558 - 0x55E */
|
|
u16 xmttplatedatalo; /* 0x560 */
|
|
u16 xmttplatedatahi; /* 0x562 */
|
|
|
|
u16 PAD[2]; /* 0x564 - 0x566 */
|
|
|
|
u16 xmtsel; /* 0x568 */
|
|
u16 xmttxcnt; /* 0x56A */
|
|
u16 xmttxshmaddr; /* 0x56C */
|
|
|
|
u16 PAD[0x09]; /* 0x56E - 0x57E */
|
|
|
|
/* TXE1 Block */
|
|
u16 PAD[0x40]; /* 0x580 - 0x5FE */
|
|
|
|
/* TSF Block */
|
|
u16 PAD[0X02]; /* 0x600 - 0x602 */
|
|
u16 tsf_cfpstrt_l; /* 0x604 */
|
|
u16 tsf_cfpstrt_h; /* 0x606 */
|
|
u16 PAD[0X05]; /* 0x608 - 0x610 */
|
|
u16 tsf_cfppretbtt; /* 0x612 */
|
|
u16 PAD[0XD]; /* 0x614 - 0x62C */
|
|
u16 tsf_clk_frac_l; /* 0x62E */
|
|
u16 tsf_clk_frac_h; /* 0x630 */
|
|
u16 PAD[0X14]; /* 0x632 - 0x658 */
|
|
u16 tsf_random; /* 0x65A */
|
|
u16 PAD[0x05]; /* 0x65C - 0x664 */
|
|
/* GPTimer 2 registers */
|
|
u16 tsf_gpt2_stat; /* 0x666 */
|
|
u16 tsf_gpt2_ctr_l; /* 0x668 */
|
|
u16 tsf_gpt2_ctr_h; /* 0x66A */
|
|
u16 tsf_gpt2_val_l; /* 0x66C */
|
|
u16 tsf_gpt2_val_h; /* 0x66E */
|
|
u16 tsf_gptall_stat; /* 0x670 */
|
|
u16 PAD[0x07]; /* 0x672 - 0x67E */
|
|
|
|
/* IFS Block */
|
|
u16 ifs_sifs_rx_tx_tx; /* 0x680 */
|
|
u16 ifs_sifs_nav_tx; /* 0x682 */
|
|
u16 ifs_slot; /* 0x684 */
|
|
u16 PAD; /* 0x686 */
|
|
u16 ifs_ctl; /* 0x688 */
|
|
u16 PAD[0x3]; /* 0x68a - 0x68F */
|
|
u16 ifsstat; /* 0x690 */
|
|
u16 ifsmedbusyctl; /* 0x692 */
|
|
u16 iftxdur; /* 0x694 */
|
|
u16 PAD[0x3]; /* 0x696 - 0x69b */
|
|
/* EDCF support in dot11macs */
|
|
u16 ifs_aifsn; /* 0x69c */
|
|
u16 ifs_ctl1; /* 0x69e */
|
|
|
|
/* slow clock registers */
|
|
u16 scc_ctl; /* 0x6a0 */
|
|
u16 scc_timer_l; /* 0x6a2 */
|
|
u16 scc_timer_h; /* 0x6a4 */
|
|
u16 scc_frac; /* 0x6a6 */
|
|
u16 scc_fastpwrup_dly; /* 0x6a8 */
|
|
u16 scc_per; /* 0x6aa */
|
|
u16 scc_per_frac; /* 0x6ac */
|
|
u16 scc_cal_timer_l; /* 0x6ae */
|
|
u16 scc_cal_timer_h; /* 0x6b0 */
|
|
u16 PAD; /* 0x6b2 */
|
|
|
|
u16 PAD[0x26];
|
|
|
|
/* NAV Block */
|
|
u16 nav_ctl; /* 0x700 */
|
|
u16 navstat; /* 0x702 */
|
|
u16 PAD[0x3e]; /* 0x702 - 0x77E */
|
|
|
|
/* WEP/PMQ Block *//* 0x780 - 0x7FE */
|
|
u16 PAD[0x20]; /* 0x780 - 0x7BE */
|
|
|
|
u16 wepctl; /* 0x7C0 */
|
|
u16 wepivloc; /* 0x7C2 */
|
|
u16 wepivkey; /* 0x7C4 */
|
|
u16 wepwkey; /* 0x7C6 */
|
|
|
|
u16 PAD[4]; /* 0x7C8 - 0x7CE */
|
|
u16 pcmctl; /* 0X7D0 */
|
|
u16 pcmstat; /* 0X7D2 */
|
|
u16 PAD[6]; /* 0x7D4 - 0x7DE */
|
|
|
|
u16 pmqctl; /* 0x7E0 */
|
|
u16 pmqstatus; /* 0x7E2 */
|
|
u16 pmqpat0; /* 0x7E4 */
|
|
u16 pmqpat1; /* 0x7E6 */
|
|
u16 pmqpat2; /* 0x7E8 */
|
|
|
|
u16 pmqdat; /* 0x7EA */
|
|
u16 pmqdator; /* 0x7EC */
|
|
u16 pmqhst; /* 0x7EE */
|
|
u16 pmqpath0; /* 0x7F0 */
|
|
u16 pmqpath1; /* 0x7F2 */
|
|
u16 pmqpath2; /* 0x7F4 */
|
|
u16 pmqdath; /* 0x7F6 */
|
|
|
|
u16 PAD[0x04]; /* 0x7F8 - 0x7FE */
|
|
|
|
/* SHM *//* 0x800 - 0xEFE */
|
|
u16 PAD[0x380]; /* 0x800 - 0xEFE */
|
|
};
|
|
|
|
/* d11 register field offset */
|
|
#define D11REGOFFS(field) offsetof(struct d11regs, field)
|
|
|
|
#define PIHR_BASE 0x0400 /* byte address of packed IHR region */
|
|
|
|
/* biststatus */
|
|
#define BT_DONE (1U << 31) /* bist done */
|
|
#define BT_B2S (1 << 30) /* bist2 ram summary bit */
|
|
|
|
/* intstatus and intmask */
|
|
#define I_PC (1 << 10) /* pci descriptor error */
|
|
#define I_PD (1 << 11) /* pci data error */
|
|
#define I_DE (1 << 12) /* descriptor protocol error */
|
|
#define I_RU (1 << 13) /* receive descriptor underflow */
|
|
#define I_RO (1 << 14) /* receive fifo overflow */
|
|
#define I_XU (1 << 15) /* transmit fifo underflow */
|
|
#define I_RI (1 << 16) /* receive interrupt */
|
|
#define I_XI (1 << 24) /* transmit interrupt */
|
|
|
|
/* interrupt receive lazy */
|
|
#define IRL_TO_MASK 0x00ffffff /* timeout */
|
|
#define IRL_FC_MASK 0xff000000 /* frame count */
|
|
#define IRL_FC_SHIFT 24 /* frame count */
|
|
|
|
/*== maccontrol register ==*/
|
|
#define MCTL_GMODE (1U << 31)
|
|
#define MCTL_DISCARD_PMQ (1 << 30)
|
|
#define MCTL_TBTTHOLD (1 << 28)
|
|
#define MCTL_WAKE (1 << 26)
|
|
#define MCTL_HPS (1 << 25)
|
|
#define MCTL_PROMISC (1 << 24)
|
|
#define MCTL_KEEPBADFCS (1 << 23)
|
|
#define MCTL_KEEPCONTROL (1 << 22)
|
|
#define MCTL_PHYLOCK (1 << 21)
|
|
#define MCTL_BCNS_PROMISC (1 << 20)
|
|
#define MCTL_LOCK_RADIO (1 << 19)
|
|
#define MCTL_AP (1 << 18)
|
|
#define MCTL_INFRA (1 << 17)
|
|
#define MCTL_BIGEND (1 << 16)
|
|
#define MCTL_GPOUT_SEL_MASK (3 << 14)
|
|
#define MCTL_GPOUT_SEL_SHIFT 14
|
|
#define MCTL_EN_PSMDBG (1 << 13)
|
|
#define MCTL_IHR_EN (1 << 10)
|
|
#define MCTL_SHM_UPPER (1 << 9)
|
|
#define MCTL_SHM_EN (1 << 8)
|
|
#define MCTL_PSM_JMP_0 (1 << 2)
|
|
#define MCTL_PSM_RUN (1 << 1)
|
|
#define MCTL_EN_MAC (1 << 0)
|
|
|
|
/*== maccommand register ==*/
|
|
#define MCMD_BCN0VLD (1 << 0)
|
|
#define MCMD_BCN1VLD (1 << 1)
|
|
#define MCMD_DIRFRMQVAL (1 << 2)
|
|
#define MCMD_CCA (1 << 3)
|
|
#define MCMD_BG_NOISE (1 << 4)
|
|
#define MCMD_SKIP_SHMINIT (1 << 5) /* only used for simulation */
|
|
#define MCMD_SAMPLECOLL MCMD_SKIP_SHMINIT /* reuse for sample collect */
|
|
|
|
/*== macintstatus/macintmask ==*/
|
|
/* gracefully suspended */
|
|
#define MI_MACSSPNDD (1 << 0)
|
|
/* beacon template available */
|
|
#define MI_BCNTPL (1 << 1)
|
|
/* TBTT indication */
|
|
#define MI_TBTT (1 << 2)
|
|
/* beacon successfully tx'd */
|
|
#define MI_BCNSUCCESS (1 << 3)
|
|
/* beacon canceled (IBSS) */
|
|
#define MI_BCNCANCLD (1 << 4)
|
|
/* end of ATIM-window (IBSS) */
|
|
#define MI_ATIMWINEND (1 << 5)
|
|
/* PMQ entries available */
|
|
#define MI_PMQ (1 << 6)
|
|
/* non-specific gen-stat bits that are set by PSM */
|
|
#define MI_NSPECGEN_0 (1 << 7)
|
|
/* non-specific gen-stat bits that are set by PSM */
|
|
#define MI_NSPECGEN_1 (1 << 8)
|
|
/* MAC level Tx error */
|
|
#define MI_MACTXERR (1 << 9)
|
|
/* non-specific gen-stat bits that are set by PSM */
|
|
#define MI_NSPECGEN_3 (1 << 10)
|
|
/* PHY Tx error */
|
|
#define MI_PHYTXERR (1 << 11)
|
|
/* Power Management Event */
|
|
#define MI_PME (1 << 12)
|
|
/* General-purpose timer0 */
|
|
#define MI_GP0 (1 << 13)
|
|
/* General-purpose timer1 */
|
|
#define MI_GP1 (1 << 14)
|
|
/* (ORed) DMA-interrupts */
|
|
#define MI_DMAINT (1 << 15)
|
|
/* MAC has completed a TX FIFO Suspend/Flush */
|
|
#define MI_TXSTOP (1 << 16)
|
|
/* MAC has completed a CCA measurement */
|
|
#define MI_CCA (1 << 17)
|
|
/* MAC has collected background noise samples */
|
|
#define MI_BG_NOISE (1 << 18)
|
|
/* MBSS DTIM TBTT indication */
|
|
#define MI_DTIM_TBTT (1 << 19)
|
|
/* Probe response queue needs attention */
|
|
#define MI_PRQ (1 << 20)
|
|
/* Radio/PHY has been powered back up. */
|
|
#define MI_PWRUP (1 << 21)
|
|
#define MI_RESERVED3 (1 << 22)
|
|
#define MI_RESERVED2 (1 << 23)
|
|
#define MI_RESERVED1 (1 << 25)
|
|
/* MAC detected change on RF Disable input*/
|
|
#define MI_RFDISABLE (1 << 28)
|
|
/* MAC has completed a TX */
|
|
#define MI_TFS (1 << 29)
|
|
/* A phy status change wrt G mode */
|
|
#define MI_PHYCHANGED (1 << 30)
|
|
/* general purpose timeout */
|
|
#define MI_TO (1U << 31)
|
|
|
|
/* Mac capabilities registers */
|
|
/*== machwcap ==*/
|
|
#define MCAP_TKIPMIC 0x80000000 /* TKIP MIC hardware present */
|
|
|
|
/*== pmqhost data ==*/
|
|
/* data entry of head pmq entry */
|
|
#define PMQH_DATA_MASK 0xffff0000
|
|
/* PM entry for BSS config */
|
|
#define PMQH_BSSCFG 0x00100000
|
|
/* PM Mode OFF: power save off */
|
|
#define PMQH_PMOFF 0x00010000
|
|
/* PM Mode ON: power save on */
|
|
#define PMQH_PMON 0x00020000
|
|
/* Dis-associated or De-authenticated */
|
|
#define PMQH_DASAT 0x00040000
|
|
/* ATIM not acknowledged */
|
|
#define PMQH_ATIMFAIL 0x00080000
|
|
/* delete head entry */
|
|
#define PMQH_DEL_ENTRY 0x00000001
|
|
/* delete head entry to cur read pointer -1 */
|
|
#define PMQH_DEL_MULT 0x00000002
|
|
/* pmq overflow indication */
|
|
#define PMQH_OFLO 0x00000004
|
|
/* entries are present in pmq */
|
|
#define PMQH_NOT_EMPTY 0x00000008
|
|
|
|
/*== phydebug ==*/
|
|
/* phy is asserting carrier sense */
|
|
#define PDBG_CRS (1 << 0)
|
|
/* phy is taking xmit byte from mac this cycle */
|
|
#define PDBG_TXA (1 << 1)
|
|
/* mac is instructing the phy to transmit a frame */
|
|
#define PDBG_TXF (1 << 2)
|
|
/* phy is signalling a transmit Error to the mac */
|
|
#define PDBG_TXE (1 << 3)
|
|
/* phy detected the end of a valid frame preamble */
|
|
#define PDBG_RXF (1 << 4)
|
|
/* phy detected the end of a valid PLCP header */
|
|
#define PDBG_RXS (1 << 5)
|
|
/* rx start not asserted */
|
|
#define PDBG_RXFRG (1 << 6)
|
|
/* mac is taking receive byte from phy this cycle */
|
|
#define PDBG_RXV (1 << 7)
|
|
/* RF portion of the radio is disabled */
|
|
#define PDBG_RFD (1 << 16)
|
|
|
|
/*== objaddr register ==*/
|
|
#define OBJADDR_SEL_MASK 0x000F0000
|
|
#define OBJADDR_UCM_SEL 0x00000000
|
|
#define OBJADDR_SHM_SEL 0x00010000
|
|
#define OBJADDR_SCR_SEL 0x00020000
|
|
#define OBJADDR_IHR_SEL 0x00030000
|
|
#define OBJADDR_RCMTA_SEL 0x00040000
|
|
#define OBJADDR_SRCHM_SEL 0x00060000
|
|
#define OBJADDR_WINC 0x01000000
|
|
#define OBJADDR_RINC 0x02000000
|
|
#define OBJADDR_AUTO_INC 0x03000000
|
|
|
|
#define WEP_PCMADDR 0x07d4
|
|
#define WEP_PCMDATA 0x07d6
|
|
|
|
/*== frmtxstatus ==*/
|
|
#define TXS_V (1 << 0) /* valid bit */
|
|
#define TXS_STATUS_MASK 0xffff
|
|
#define TXS_FID_MASK 0xffff0000
|
|
#define TXS_FID_SHIFT 16
|
|
|
|
/*== frmtxstatus2 ==*/
|
|
#define TXS_SEQ_MASK 0xffff
|
|
#define TXS_PTX_MASK 0xff0000
|
|
#define TXS_PTX_SHIFT 16
|
|
#define TXS_MU_MASK 0x01000000
|
|
#define TXS_MU_SHIFT 24
|
|
|
|
/*== clk_ctl_st ==*/
|
|
#define CCS_ERSRC_REQ_D11PLL 0x00000100 /* d11 core pll request */
|
|
#define CCS_ERSRC_REQ_PHYPLL 0x00000200 /* PHY pll request */
|
|
#define CCS_ERSRC_AVAIL_D11PLL 0x01000000 /* d11 core pll available */
|
|
#define CCS_ERSRC_AVAIL_PHYPLL 0x02000000 /* PHY pll available */
|
|
|
|
/* HT Cloclk Ctrl and Clock Avail for 4313 */
|
|
#define CCS_ERSRC_REQ_HT 0x00000010 /* HT avail request */
|
|
#define CCS_ERSRC_AVAIL_HT 0x00020000 /* HT clock available */
|
|
|
|
/* tsf_cfprep register */
|
|
#define CFPREP_CBI_MASK 0xffffffc0
|
|
#define CFPREP_CBI_SHIFT 6
|
|
#define CFPREP_CFPP 0x00000001
|
|
|
|
/* tx fifo sizes values are in terms of 256 byte blocks */
|
|
#define TXFIFOCMD_RESET_MASK (1 << 15) /* reset */
|
|
#define TXFIFOCMD_FIFOSEL_SHIFT 8 /* fifo */
|
|
#define TXFIFO_FIFOTOP_SHIFT 8 /* fifo start */
|
|
|
|
#define TXFIFO_START_BLK16 65 /* Base address + 32 * 512 B/P */
|
|
#define TXFIFO_START_BLK 6 /* Base address + 6 * 256 B */
|
|
#define TXFIFO_SIZE_UNIT 256 /* one unit corresponds to 256 bytes */
|
|
#define MBSS16_TEMPLMEM_MINBLKS 65 /* one unit corresponds to 256 bytes */
|
|
|
|
/*== phy versions (PhyVersion:Revision field) ==*/
|
|
/* analog block version */
|
|
#define PV_AV_MASK 0xf000
|
|
/* analog block version bitfield offset */
|
|
#define PV_AV_SHIFT 12
|
|
/* phy type */
|
|
#define PV_PT_MASK 0x0f00
|
|
/* phy type bitfield offset */
|
|
#define PV_PT_SHIFT 8
|
|
/* phy version */
|
|
#define PV_PV_MASK 0x000f
|
|
#define PHY_TYPE(v) ((v & PV_PT_MASK) >> PV_PT_SHIFT)
|
|
|
|
/*== phy types (PhyVersion:PhyType field) ==*/
|
|
#define PHY_TYPE_N 4 /* N-Phy value */
|
|
#define PHY_TYPE_SSN 6 /* SSLPN-Phy value */
|
|
#define PHY_TYPE_LCN 8 /* LCN-Phy value */
|
|
#define PHY_TYPE_LCNXN 9 /* LCNXN-Phy value */
|
|
#define PHY_TYPE_NULL 0xf /* Invalid Phy value */
|
|
|
|
/*== analog types (PhyVersion:AnalogType field) ==*/
|
|
#define ANA_11N_013 5
|
|
|
|
/* 802.11a PLCP header def */
|
|
struct ofdm_phy_hdr {
|
|
u8 rlpt[3]; /* rate, length, parity, tail */
|
|
u16 service;
|
|
u8 pad;
|
|
} __packed;
|
|
|
|
#define D11A_PHY_HDR_GRATE(phdr) ((phdr)->rlpt[0] & 0x0f)
|
|
#define D11A_PHY_HDR_GRES(phdr) (((phdr)->rlpt[0] >> 4) & 0x01)
|
|
#define D11A_PHY_HDR_GLENGTH(phdr) (((u32 *)((phdr)->rlpt) >> 5) & 0x0fff)
|
|
#define D11A_PHY_HDR_GPARITY(phdr) (((phdr)->rlpt[3] >> 1) & 0x01)
|
|
#define D11A_PHY_HDR_GTAIL(phdr) (((phdr)->rlpt[3] >> 2) & 0x3f)
|
|
|
|
/* rate encoded per 802.11a-1999 sec 17.3.4.1 */
|
|
#define D11A_PHY_HDR_SRATE(phdr, rate) \
|
|
((phdr)->rlpt[0] = ((phdr)->rlpt[0] & 0xf0) | ((rate) & 0xf))
|
|
/* set reserved field to zero */
|
|
#define D11A_PHY_HDR_SRES(phdr) ((phdr)->rlpt[0] &= 0xef)
|
|
/* length is number of octets in PSDU */
|
|
#define D11A_PHY_HDR_SLENGTH(phdr, length) \
|
|
(*(u32 *)((phdr)->rlpt) = *(u32 *)((phdr)->rlpt) | \
|
|
(((length) & 0x0fff) << 5))
|
|
/* set the tail to all zeros */
|
|
#define D11A_PHY_HDR_STAIL(phdr) ((phdr)->rlpt[3] &= 0x03)
|
|
|
|
#define D11A_PHY_HDR_LEN_L 3 /* low-rate part of PLCP header */
|
|
#define D11A_PHY_HDR_LEN_R 2 /* high-rate part of PLCP header */
|
|
|
|
#define D11A_PHY_TX_DELAY (2) /* 2.1 usec */
|
|
|
|
#define D11A_PHY_HDR_TIME (4) /* low-rate part of PLCP header */
|
|
#define D11A_PHY_PRE_TIME (16)
|
|
#define D11A_PHY_PREHDR_TIME (D11A_PHY_PRE_TIME + D11A_PHY_HDR_TIME)
|
|
|
|
/* 802.11b PLCP header def */
|
|
struct cck_phy_hdr {
|
|
u8 signal;
|
|
u8 service;
|
|
u16 length;
|
|
u16 crc;
|
|
} __packed;
|
|
|
|
#define D11B_PHY_HDR_LEN 6
|
|
|
|
#define D11B_PHY_TX_DELAY (3) /* 3.4 usec */
|
|
|
|
#define D11B_PHY_LHDR_TIME (D11B_PHY_HDR_LEN << 3)
|
|
#define D11B_PHY_LPRE_TIME (144)
|
|
#define D11B_PHY_LPREHDR_TIME (D11B_PHY_LPRE_TIME + D11B_PHY_LHDR_TIME)
|
|
|
|
#define D11B_PHY_SHDR_TIME (D11B_PHY_LHDR_TIME >> 1)
|
|
#define D11B_PHY_SPRE_TIME (D11B_PHY_LPRE_TIME >> 1)
|
|
#define D11B_PHY_SPREHDR_TIME (D11B_PHY_SPRE_TIME + D11B_PHY_SHDR_TIME)
|
|
|
|
#define D11B_PLCP_SIGNAL_LOCKED (1 << 2)
|
|
#define D11B_PLCP_SIGNAL_LE (1 << 7)
|
|
|
|
#define MIMO_PLCP_MCS_MASK 0x7f /* mcs index */
|
|
#define MIMO_PLCP_40MHZ 0x80 /* 40 Hz frame */
|
|
#define MIMO_PLCP_AMPDU 0x08 /* ampdu */
|
|
|
|
#define BRCMS_GET_CCK_PLCP_LEN(plcp) (plcp[4] + (plcp[5] << 8))
|
|
#define BRCMS_GET_MIMO_PLCP_LEN(plcp) (plcp[1] + (plcp[2] << 8))
|
|
#define BRCMS_SET_MIMO_PLCP_LEN(plcp, len) \
|
|
do { \
|
|
plcp[1] = len & 0xff; \
|
|
plcp[2] = ((len >> 8) & 0xff); \
|
|
} while (0)
|
|
|
|
#define BRCMS_SET_MIMO_PLCP_AMPDU(plcp) (plcp[3] |= MIMO_PLCP_AMPDU)
|
|
#define BRCMS_CLR_MIMO_PLCP_AMPDU(plcp) (plcp[3] &= ~MIMO_PLCP_AMPDU)
|
|
#define BRCMS_IS_MIMO_PLCP_AMPDU(plcp) (plcp[3] & MIMO_PLCP_AMPDU)
|
|
|
|
/*
|
|
* The dot11a PLCP header is 5 bytes. To simplify the software (so that we
|
|
* don't need e.g. different tx DMA headers for 11a and 11b), the PLCP header
|
|
* has padding added in the ucode.
|
|
*/
|
|
#define D11_PHY_HDR_LEN 6
|
|
|
|
/* TX DMA buffer header */
|
|
struct d11txh {
|
|
__le16 MacTxControlLow; /* 0x0 */
|
|
__le16 MacTxControlHigh; /* 0x1 */
|
|
__le16 MacFrameControl; /* 0x2 */
|
|
__le16 TxFesTimeNormal; /* 0x3 */
|
|
__le16 PhyTxControlWord; /* 0x4 */
|
|
__le16 PhyTxControlWord_1; /* 0x5 */
|
|
__le16 PhyTxControlWord_1_Fbr; /* 0x6 */
|
|
__le16 PhyTxControlWord_1_Rts; /* 0x7 */
|
|
__le16 PhyTxControlWord_1_FbrRts; /* 0x8 */
|
|
__le16 MainRates; /* 0x9 */
|
|
__le16 XtraFrameTypes; /* 0xa */
|
|
u8 IV[16]; /* 0x0b - 0x12 */
|
|
u8 TxFrameRA[6]; /* 0x13 - 0x15 */
|
|
__le16 TxFesTimeFallback; /* 0x16 */
|
|
u8 RTSPLCPFallback[6]; /* 0x17 - 0x19 */
|
|
__le16 RTSDurFallback; /* 0x1a */
|
|
u8 FragPLCPFallback[6]; /* 0x1b - 1d */
|
|
__le16 FragDurFallback; /* 0x1e */
|
|
__le16 MModeLen; /* 0x1f */
|
|
__le16 MModeFbrLen; /* 0x20 */
|
|
__le16 TstampLow; /* 0x21 */
|
|
__le16 TstampHigh; /* 0x22 */
|
|
__le16 ABI_MimoAntSel; /* 0x23 */
|
|
__le16 PreloadSize; /* 0x24 */
|
|
__le16 AmpduSeqCtl; /* 0x25 */
|
|
__le16 TxFrameID; /* 0x26 */
|
|
__le16 TxStatus; /* 0x27 */
|
|
__le16 MaxNMpdus; /* 0x28 */
|
|
__le16 MaxABytes_MRT; /* 0x29 */
|
|
__le16 MaxABytes_FBR; /* 0x2a */
|
|
__le16 MinMBytes; /* 0x2b */
|
|
u8 RTSPhyHeader[D11_PHY_HDR_LEN]; /* 0x2c - 0x2e */
|
|
struct ieee80211_rts rts_frame; /* 0x2f - 0x36 */
|
|
u16 PAD; /* 0x37 */
|
|
} __packed;
|
|
|
|
#define D11_TXH_LEN 112 /* bytes */
|
|
|
|
/* Frame Types */
|
|
#define FT_CCK 0
|
|
#define FT_OFDM 1
|
|
#define FT_HT 2
|
|
#define FT_N 3
|
|
|
|
/*
|
|
* Position of MPDU inside A-MPDU; indicated with bits 10:9
|
|
* of MacTxControlLow
|
|
*/
|
|
#define TXC_AMPDU_SHIFT 9 /* shift for ampdu settings */
|
|
#define TXC_AMPDU_NONE 0 /* Regular MPDU, not an A-MPDU */
|
|
#define TXC_AMPDU_FIRST 1 /* first MPDU of an A-MPDU */
|
|
#define TXC_AMPDU_MIDDLE 2 /* intermediate MPDU of an A-MPDU */
|
|
#define TXC_AMPDU_LAST 3 /* last (or single) MPDU of an A-MPDU */
|
|
|
|
/*== MacTxControlLow ==*/
|
|
#define TXC_AMIC 0x8000
|
|
#define TXC_SENDCTS 0x0800
|
|
#define TXC_AMPDU_MASK 0x0600
|
|
#define TXC_BW_40 0x0100
|
|
#define TXC_FREQBAND_5G 0x0080
|
|
#define TXC_DFCS 0x0040
|
|
#define TXC_IGNOREPMQ 0x0020
|
|
#define TXC_HWSEQ 0x0010
|
|
#define TXC_STARTMSDU 0x0008
|
|
#define TXC_SENDRTS 0x0004
|
|
#define TXC_LONGFRAME 0x0002
|
|
#define TXC_IMMEDACK 0x0001
|
|
|
|
/*== MacTxControlHigh ==*/
|
|
/* RTS fallback preamble type 1 = SHORT 0 = LONG */
|
|
#define TXC_PREAMBLE_RTS_FB_SHORT 0x8000
|
|
/* RTS main rate preamble type 1 = SHORT 0 = LONG */
|
|
#define TXC_PREAMBLE_RTS_MAIN_SHORT 0x4000
|
|
/*
|
|
* Main fallback rate preamble type
|
|
* 1 = SHORT for OFDM/GF for MIMO
|
|
* 0 = LONG for CCK/MM for MIMO
|
|
*/
|
|
#define TXC_PREAMBLE_DATA_FB_SHORT 0x2000
|
|
|
|
/* TXC_PREAMBLE_DATA_MAIN is in PhyTxControl bit 5 */
|
|
/* use fallback rate for this AMPDU */
|
|
#define TXC_AMPDU_FBR 0x1000
|
|
#define TXC_SECKEY_MASK 0x0FF0
|
|
#define TXC_SECKEY_SHIFT 4
|
|
/* Use alternate txpwr defined at loc. M_ALT_TXPWR_IDX */
|
|
#define TXC_ALT_TXPWR 0x0008
|
|
#define TXC_SECTYPE_MASK 0x0007
|
|
#define TXC_SECTYPE_SHIFT 0
|
|
|
|
/* Null delimiter for Fallback rate */
|
|
#define AMPDU_FBR_NULL_DELIM 5 /* Location of Null delimiter count for AMPDU */
|
|
|
|
/* PhyTxControl for Mimophy */
|
|
#define PHY_TXC_PWR_MASK 0xFC00
|
|
#define PHY_TXC_PWR_SHIFT 10
|
|
#define PHY_TXC_ANT_MASK 0x03C0 /* bit 6, 7, 8, 9 */
|
|
#define PHY_TXC_ANT_SHIFT 6
|
|
#define PHY_TXC_ANT_0_1 0x00C0 /* auto, last rx */
|
|
#define PHY_TXC_LCNPHY_ANT_LAST 0x0000
|
|
#define PHY_TXC_ANT_3 0x0200 /* virtual antenna 3 */
|
|
#define PHY_TXC_ANT_2 0x0100 /* virtual antenna 2 */
|
|
#define PHY_TXC_ANT_1 0x0080 /* virtual antenna 1 */
|
|
#define PHY_TXC_ANT_0 0x0040 /* virtual antenna 0 */
|
|
#define PHY_TXC_SHORT_HDR 0x0010
|
|
|
|
#define PHY_TXC_OLD_ANT_0 0x0000
|
|
#define PHY_TXC_OLD_ANT_1 0x0100
|
|
#define PHY_TXC_OLD_ANT_LAST 0x0300
|
|
|
|
/* PhyTxControl_1 for Mimophy */
|
|
#define PHY_TXC1_BW_MASK 0x0007
|
|
#define PHY_TXC1_BW_10MHZ 0
|
|
#define PHY_TXC1_BW_10MHZ_UP 1
|
|
#define PHY_TXC1_BW_20MHZ 2
|
|
#define PHY_TXC1_BW_20MHZ_UP 3
|
|
#define PHY_TXC1_BW_40MHZ 4
|
|
#define PHY_TXC1_BW_40MHZ_DUP 5
|
|
#define PHY_TXC1_MODE_SHIFT 3
|
|
#define PHY_TXC1_MODE_MASK 0x0038
|
|
#define PHY_TXC1_MODE_SISO 0
|
|
#define PHY_TXC1_MODE_CDD 1
|
|
#define PHY_TXC1_MODE_STBC 2
|
|
#define PHY_TXC1_MODE_SDM 3
|
|
|
|
/* PhyTxControl for HTphy that are different from Mimophy */
|
|
#define PHY_TXC_HTANT_MASK 0x3fC0 /* bits 6-13 */
|
|
|
|
/* XtraFrameTypes */
|
|
#define XFTS_RTS_FT_SHIFT 2
|
|
#define XFTS_FBRRTS_FT_SHIFT 4
|
|
#define XFTS_CHANNEL_SHIFT 8
|
|
|
|
/* Antenna diversity bit in ant_wr_settle */
|
|
#define PHY_AWS_ANTDIV 0x2000
|
|
|
|
/* IFS ctl */
|
|
#define IFS_USEEDCF (1 << 2)
|
|
|
|
/* IFS ctl1 */
|
|
#define IFS_CTL1_EDCRS (1 << 3)
|
|
#define IFS_CTL1_EDCRS_20L (1 << 4)
|
|
#define IFS_CTL1_EDCRS_40 (1 << 5)
|
|
|
|
/* ABI_MimoAntSel */
|
|
#define ABI_MAS_ADDR_BMP_IDX_MASK 0x0f00
|
|
#define ABI_MAS_ADDR_BMP_IDX_SHIFT 8
|
|
#define ABI_MAS_FBR_ANT_PTN_MASK 0x00f0
|
|
#define ABI_MAS_FBR_ANT_PTN_SHIFT 4
|
|
#define ABI_MAS_MRT_ANT_PTN_MASK 0x000f
|
|
|
|
/* tx status packet */
|
|
struct tx_status {
|
|
u16 framelen;
|
|
u16 PAD;
|
|
u16 frameid;
|
|
u16 status;
|
|
u16 lasttxtime;
|
|
u16 sequence;
|
|
u16 phyerr;
|
|
u16 ackphyrxsh;
|
|
} __packed;
|
|
|
|
#define TXSTATUS_LEN 16
|
|
|
|
/* status field bit definitions */
|
|
#define TX_STATUS_FRM_RTX_MASK 0xF000
|
|
#define TX_STATUS_FRM_RTX_SHIFT 12
|
|
#define TX_STATUS_RTS_RTX_MASK 0x0F00
|
|
#define TX_STATUS_RTS_RTX_SHIFT 8
|
|
#define TX_STATUS_MASK 0x00FE
|
|
#define TX_STATUS_PMINDCTD (1 << 7) /* PM mode indicated to AP */
|
|
#define TX_STATUS_INTERMEDIATE (1 << 6) /* intermediate or 1st ampdu pkg */
|
|
#define TX_STATUS_AMPDU (1 << 5) /* AMPDU status */
|
|
#define TX_STATUS_SUPR_MASK 0x1C /* suppress status bits (4:2) */
|
|
#define TX_STATUS_SUPR_SHIFT 2
|
|
#define TX_STATUS_ACK_RCV (1 << 1) /* ACK received */
|
|
#define TX_STATUS_VALID (1 << 0) /* Tx status valid */
|
|
#define TX_STATUS_NO_ACK 0
|
|
|
|
/* suppress status reason codes */
|
|
#define TX_STATUS_SUPR_PMQ (1 << 2) /* PMQ entry */
|
|
#define TX_STATUS_SUPR_FLUSH (2 << 2) /* flush request */
|
|
#define TX_STATUS_SUPR_FRAG (3 << 2) /* previous frag failure */
|
|
#define TX_STATUS_SUPR_TBTT (3 << 2) /* SHARED: Probe resp supr for TBTT */
|
|
#define TX_STATUS_SUPR_BADCH (4 << 2) /* channel mismatch */
|
|
#define TX_STATUS_SUPR_EXPTIME (5 << 2) /* lifetime expiry */
|
|
#define TX_STATUS_SUPR_UF (6 << 2) /* underflow */
|
|
|
|
/* Unexpected tx status for rate update */
|
|
#define TX_STATUS_UNEXP(status) \
|
|
((((status) & TX_STATUS_INTERMEDIATE) != 0) && \
|
|
TX_STATUS_UNEXP_AMPDU(status))
|
|
|
|
/* Unexpected tx status for A-MPDU rate update */
|
|
#define TX_STATUS_UNEXP_AMPDU(status) \
|
|
((((status) & TX_STATUS_SUPR_MASK) != 0) && \
|
|
(((status) & TX_STATUS_SUPR_MASK) != TX_STATUS_SUPR_EXPTIME))
|
|
|
|
#define TX_STATUS_BA_BMAP03_MASK 0xF000 /* ba bitmap 0:3 in 1st pkg */
|
|
#define TX_STATUS_BA_BMAP03_SHIFT 12 /* ba bitmap 0:3 in 1st pkg */
|
|
#define TX_STATUS_BA_BMAP47_MASK 0x001E /* ba bitmap 4:7 in 2nd pkg */
|
|
#define TX_STATUS_BA_BMAP47_SHIFT 3 /* ba bitmap 4:7 in 2nd pkg */
|
|
|
|
/* RXE (Receive Engine) */
|
|
|
|
/* RCM_CTL */
|
|
#define RCM_INC_MASK_H 0x0080
|
|
#define RCM_INC_MASK_L 0x0040
|
|
#define RCM_INC_DATA 0x0020
|
|
#define RCM_INDEX_MASK 0x001F
|
|
#define RCM_SIZE 15
|
|
|
|
#define RCM_MAC_OFFSET 0 /* current MAC address */
|
|
#define RCM_BSSID_OFFSET 3 /* current BSSID address */
|
|
#define RCM_F_BSSID_0_OFFSET 6 /* foreign BSS CFP tracking */
|
|
#define RCM_F_BSSID_1_OFFSET 9 /* foreign BSS CFP tracking */
|
|
#define RCM_F_BSSID_2_OFFSET 12 /* foreign BSS CFP tracking */
|
|
|
|
#define RCM_WEP_TA0_OFFSET 16
|
|
#define RCM_WEP_TA1_OFFSET 19
|
|
#define RCM_WEP_TA2_OFFSET 22
|
|
#define RCM_WEP_TA3_OFFSET 25
|
|
|
|
/* PSM Block */
|
|
|
|
/* psm_phy_hdr_param bits */
|
|
#define MAC_PHY_RESET 1
|
|
#define MAC_PHY_CLOCK_EN 2
|
|
#define MAC_PHY_FORCE_CLK 4
|
|
|
|
/* WEP Block */
|
|
|
|
/* WEP_WKEY */
|
|
#define WKEY_START (1 << 8)
|
|
#define WKEY_SEL_MASK 0x1F
|
|
|
|
/* WEP data formats */
|
|
|
|
/* the number of RCMTA entries */
|
|
#define RCMTA_SIZE 50
|
|
|
|
#define M_ADDR_BMP_BLK (0x37e * 2)
|
|
#define M_ADDR_BMP_BLK_SZ 12
|
|
|
|
#define ADDR_BMP_RA (1 << 0) /* Receiver Address (RA) */
|
|
#define ADDR_BMP_TA (1 << 1) /* Transmitter Address (TA) */
|
|
#define ADDR_BMP_BSSID (1 << 2) /* BSSID */
|
|
#define ADDR_BMP_AP (1 << 3) /* Infra-BSS Access Point */
|
|
#define ADDR_BMP_STA (1 << 4) /* Infra-BSS Station */
|
|
#define ADDR_BMP_RESERVED1 (1 << 5)
|
|
#define ADDR_BMP_RESERVED2 (1 << 6)
|
|
#define ADDR_BMP_RESERVED3 (1 << 7)
|
|
#define ADDR_BMP_BSS_IDX_MASK (3 << 8) /* BSS control block index */
|
|
#define ADDR_BMP_BSS_IDX_SHIFT 8
|
|
|
|
#define WSEC_MAX_RCMTA_KEYS 54
|
|
|
|
/* max keys in M_TKMICKEYS_BLK */
|
|
#define WSEC_MAX_TKMIC_ENGINE_KEYS 12 /* 8 + 4 default */
|
|
|
|
/* max RXE match registers */
|
|
#define WSEC_MAX_RXE_KEYS 4
|
|
|
|
/* SECKINDXALGO (Security Key Index & Algorithm Block) word format */
|
|
/* SKL (Security Key Lookup) */
|
|
#define SKL_ALGO_MASK 0x0007
|
|
#define SKL_ALGO_SHIFT 0
|
|
#define SKL_KEYID_MASK 0x0008
|
|
#define SKL_KEYID_SHIFT 3
|
|
#define SKL_INDEX_MASK 0x03F0
|
|
#define SKL_INDEX_SHIFT 4
|
|
#define SKL_GRP_ALGO_MASK 0x1c00
|
|
#define SKL_GRP_ALGO_SHIFT 10
|
|
|
|
/* additional bits defined for IBSS group key support */
|
|
#define SKL_IBSS_INDEX_MASK 0x01F0
|
|
#define SKL_IBSS_INDEX_SHIFT 4
|
|
#define SKL_IBSS_KEYID1_MASK 0x0600
|
|
#define SKL_IBSS_KEYID1_SHIFT 9
|
|
#define SKL_IBSS_KEYID2_MASK 0x1800
|
|
#define SKL_IBSS_KEYID2_SHIFT 11
|
|
#define SKL_IBSS_KEYALGO_MASK 0xE000
|
|
#define SKL_IBSS_KEYALGO_SHIFT 13
|
|
|
|
#define WSEC_MODE_OFF 0
|
|
#define WSEC_MODE_HW 1
|
|
#define WSEC_MODE_SW 2
|
|
|
|
#define WSEC_ALGO_OFF 0
|
|
#define WSEC_ALGO_WEP1 1
|
|
#define WSEC_ALGO_TKIP 2
|
|
#define WSEC_ALGO_AES 3
|
|
#define WSEC_ALGO_WEP128 4
|
|
#define WSEC_ALGO_AES_LEGACY 5
|
|
#define WSEC_ALGO_NALG 6
|
|
|
|
#define AES_MODE_NONE 0
|
|
#define AES_MODE_CCM 1
|
|
|
|
/* WEP_CTL (Rev 0) */
|
|
#define WECR0_KEYREG_SHIFT 0
|
|
#define WECR0_KEYREG_MASK 0x7
|
|
#define WECR0_DECRYPT (1 << 3)
|
|
#define WECR0_IVINLINE (1 << 4)
|
|
#define WECR0_WEPALG_SHIFT 5
|
|
#define WECR0_WEPALG_MASK (0x7 << 5)
|
|
#define WECR0_WKEYSEL_SHIFT 8
|
|
#define WECR0_WKEYSEL_MASK (0x7 << 8)
|
|
#define WECR0_WKEYSTART (1 << 11)
|
|
#define WECR0_WEPINIT (1 << 14)
|
|
#define WECR0_ICVERR (1 << 15)
|
|
|
|
/* Frame template map byte offsets */
|
|
#define T_ACTS_TPL_BASE (0)
|
|
#define T_NULL_TPL_BASE (0xc * 2)
|
|
#define T_QNULL_TPL_BASE (0x1c * 2)
|
|
#define T_RR_TPL_BASE (0x2c * 2)
|
|
#define T_BCN0_TPL_BASE (0x34 * 2)
|
|
#define T_PRS_TPL_BASE (0x134 * 2)
|
|
#define T_BCN1_TPL_BASE (0x234 * 2)
|
|
#define T_TX_FIFO_TXRAM_BASE (T_ACTS_TPL_BASE + \
|
|
(TXFIFO_START_BLK * TXFIFO_SIZE_UNIT))
|
|
|
|
#define T_BA_TPL_BASE T_QNULL_TPL_BASE /* template area for BA */
|
|
|
|
#define T_RAM_ACCESS_SZ 4 /* template ram is 4 byte access only */
|
|
|
|
/* Shared Mem byte offsets */
|
|
|
|
/* Location where the ucode expects the corerev */
|
|
#define M_MACHW_VER (0x00b * 2)
|
|
|
|
/* Location where the ucode expects the MAC capabilities */
|
|
#define M_MACHW_CAP_L (0x060 * 2)
|
|
#define M_MACHW_CAP_H (0x061 * 2)
|
|
|
|
/* WME shared memory */
|
|
#define M_EDCF_STATUS_OFF (0x007 * 2)
|
|
#define M_TXF_CUR_INDEX (0x018 * 2)
|
|
#define M_EDCF_QINFO (0x120 * 2)
|
|
|
|
/* PS-mode related parameters */
|
|
#define M_DOT11_SLOT (0x008 * 2)
|
|
#define M_DOT11_DTIMPERIOD (0x009 * 2)
|
|
#define M_NOSLPZNATDTIM (0x026 * 2)
|
|
|
|
/* Beacon-related parameters */
|
|
#define M_BCN0_FRM_BYTESZ (0x00c * 2) /* Bcn 0 template length */
|
|
#define M_BCN1_FRM_BYTESZ (0x00d * 2) /* Bcn 1 template length */
|
|
#define M_BCN_TXTSF_OFFSET (0x00e * 2)
|
|
#define M_TIMBPOS_INBEACON (0x00f * 2)
|
|
#define M_SFRMTXCNTFBRTHSD (0x022 * 2)
|
|
#define M_LFRMTXCNTFBRTHSD (0x023 * 2)
|
|
#define M_BCN_PCTLWD (0x02a * 2)
|
|
#define M_BCN_LI (0x05b * 2) /* beacon listen interval */
|
|
|
|
/* MAX Rx Frame len */
|
|
#define M_MAXRXFRM_LEN (0x010 * 2)
|
|
|
|
/* ACK/CTS related params */
|
|
#define M_RSP_PCTLWD (0x011 * 2)
|
|
|
|
/* Hardware Power Control */
|
|
#define M_TXPWR_N (0x012 * 2)
|
|
#define M_TXPWR_TARGET (0x013 * 2)
|
|
#define M_TXPWR_MAX (0x014 * 2)
|
|
#define M_TXPWR_CUR (0x019 * 2)
|
|
|
|
/* Rx-related parameters */
|
|
#define M_RX_PAD_DATA_OFFSET (0x01a * 2)
|
|
|
|
/* WEP Shared mem data */
|
|
#define M_SEC_DEFIVLOC (0x01e * 2)
|
|
#define M_SEC_VALNUMSOFTMCHTA (0x01f * 2)
|
|
#define M_PHYVER (0x028 * 2)
|
|
#define M_PHYTYPE (0x029 * 2)
|
|
#define M_SECRXKEYS_PTR (0x02b * 2)
|
|
#define M_TKMICKEYS_PTR (0x059 * 2)
|
|
#define M_SECKINDXALGO_BLK (0x2ea * 2)
|
|
#define M_SECKINDXALGO_BLK_SZ 54
|
|
#define M_SECPSMRXTAMCH_BLK (0x2fa * 2)
|
|
#define M_TKIP_TSC_TTAK (0x18c * 2)
|
|
#define D11_MAX_KEY_SIZE 16
|
|
|
|
#define M_MAX_ANTCNT (0x02e * 2) /* antenna swap threshold */
|
|
|
|
/* Probe response related parameters */
|
|
#define M_SSIDLEN (0x024 * 2)
|
|
#define M_PRB_RESP_FRM_LEN (0x025 * 2)
|
|
#define M_PRS_MAXTIME (0x03a * 2)
|
|
#define M_SSID (0xb0 * 2)
|
|
#define M_CTXPRS_BLK (0xc0 * 2)
|
|
#define C_CTX_PCTLWD_POS (0x4 * 2)
|
|
|
|
/* Delta between OFDM and CCK power in CCK power boost mode */
|
|
#define M_OFDM_OFFSET (0x027 * 2)
|
|
|
|
/* TSSI for last 4 11b/g CCK packets transmitted */
|
|
#define M_B_TSSI_0 (0x02c * 2)
|
|
#define M_B_TSSI_1 (0x02d * 2)
|
|
|
|
/* Host flags to turn on ucode options */
|
|
#define M_HOST_FLAGS1 (0x02f * 2)
|
|
#define M_HOST_FLAGS2 (0x030 * 2)
|
|
#define M_HOST_FLAGS3 (0x031 * 2)
|
|
#define M_HOST_FLAGS4 (0x03c * 2)
|
|
#define M_HOST_FLAGS5 (0x06a * 2)
|
|
#define M_HOST_FLAGS_SZ 16
|
|
|
|
#define M_RADAR_REG (0x033 * 2)
|
|
|
|
/* TSSI for last 4 11a OFDM packets transmitted */
|
|
#define M_A_TSSI_0 (0x034 * 2)
|
|
#define M_A_TSSI_1 (0x035 * 2)
|
|
|
|
/* noise interference measurement */
|
|
#define M_NOISE_IF_COUNT (0x034 * 2)
|
|
#define M_NOISE_IF_TIMEOUT (0x035 * 2)
|
|
|
|
#define M_RF_RX_SP_REG1 (0x036 * 2)
|
|
|
|
/* TSSI for last 4 11g OFDM packets transmitted */
|
|
#define M_G_TSSI_0 (0x038 * 2)
|
|
#define M_G_TSSI_1 (0x039 * 2)
|
|
|
|
/* Background noise measure */
|
|
#define M_JSSI_0 (0x44 * 2)
|
|
#define M_JSSI_1 (0x45 * 2)
|
|
#define M_JSSI_AUX (0x46 * 2)
|
|
|
|
#define M_CUR_2050_RADIOCODE (0x47 * 2)
|
|
|
|
/* TX fifo sizes */
|
|
#define M_FIFOSIZE0 (0x4c * 2)
|
|
#define M_FIFOSIZE1 (0x4d * 2)
|
|
#define M_FIFOSIZE2 (0x4e * 2)
|
|
#define M_FIFOSIZE3 (0x4f * 2)
|
|
#define D11_MAX_TX_FRMS 32 /* max frames allowed in tx fifo */
|
|
|
|
/* Current channel number plus upper bits */
|
|
#define M_CURCHANNEL (0x50 * 2)
|
|
#define D11_CURCHANNEL_5G 0x0100;
|
|
#define D11_CURCHANNEL_40 0x0200;
|
|
#define D11_CURCHANNEL_MAX 0x00FF;
|
|
|
|
/* last posted frameid on the bcmc fifo */
|
|
#define M_BCMC_FID (0x54 * 2)
|
|
#define INVALIDFID 0xffff
|
|
|
|
/* extended beacon phyctl bytes for 11N */
|
|
#define M_BCN_PCTL1WD (0x058 * 2)
|
|
|
|
/* idle busy ratio to duty_cycle requirement */
|
|
#define M_TX_IDLE_BUSY_RATIO_X_16_CCK (0x52 * 2)
|
|
#define M_TX_IDLE_BUSY_RATIO_X_16_OFDM (0x5A * 2)
|
|
|
|
/* CW RSSI for LCNPHY */
|
|
#define M_LCN_RSSI_0 0x1332
|
|
#define M_LCN_RSSI_1 0x1338
|
|
#define M_LCN_RSSI_2 0x133e
|
|
#define M_LCN_RSSI_3 0x1344
|
|
|
|
/* SNR for LCNPHY */
|
|
#define M_LCN_SNR_A_0 0x1334
|
|
#define M_LCN_SNR_B_0 0x1336
|
|
|
|
#define M_LCN_SNR_A_1 0x133a
|
|
#define M_LCN_SNR_B_1 0x133c
|
|
|
|
#define M_LCN_SNR_A_2 0x1340
|
|
#define M_LCN_SNR_B_2 0x1342
|
|
|
|
#define M_LCN_SNR_A_3 0x1346
|
|
#define M_LCN_SNR_B_3 0x1348
|
|
|
|
#define M_LCN_LAST_RESET (81*2)
|
|
#define M_LCN_LAST_LOC (63*2)
|
|
#define M_LCNPHY_RESET_STATUS (4902)
|
|
#define M_LCNPHY_DSC_TIME (0x98d*2)
|
|
#define M_LCNPHY_RESET_CNT_DSC (0x98b*2)
|
|
#define M_LCNPHY_RESET_CNT (0x98c*2)
|
|
|
|
/* Rate table offsets */
|
|
#define M_RT_DIRMAP_A (0xe0 * 2)
|
|
#define M_RT_BBRSMAP_A (0xf0 * 2)
|
|
#define M_RT_DIRMAP_B (0x100 * 2)
|
|
#define M_RT_BBRSMAP_B (0x110 * 2)
|
|
|
|
/* Rate table entry offsets */
|
|
#define M_RT_PRS_PLCP_POS 10
|
|
#define M_RT_PRS_DUR_POS 16
|
|
#define M_RT_OFDM_PCTL1_POS 18
|
|
|
|
#define M_20IN40_IQ (0x380 * 2)
|
|
|
|
/* SHM locations where ucode stores the current power index */
|
|
#define M_CURR_IDX1 (0x384 * 2)
|
|
#define M_CURR_IDX2 (0x387 * 2)
|
|
|
|
#define M_BSCALE_ANT0 (0x5e * 2)
|
|
#define M_BSCALE_ANT1 (0x5f * 2)
|
|
|
|
/* Antenna Diversity Testing */
|
|
#define M_MIMO_ANTSEL_RXDFLT (0x63 * 2)
|
|
#define M_ANTSEL_CLKDIV (0x61 * 2)
|
|
#define M_MIMO_ANTSEL_TXDFLT (0x64 * 2)
|
|
|
|
#define M_MIMO_MAXSYM (0x5d * 2)
|
|
#define MIMO_MAXSYM_DEF 0x8000 /* 32k */
|
|
#define MIMO_MAXSYM_MAX 0xffff /* 64k */
|
|
|
|
#define M_WATCHDOG_8TU (0x1e * 2)
|
|
#define WATCHDOG_8TU_DEF 5
|
|
#define WATCHDOG_8TU_MAX 10
|
|
|
|
/* Manufacturing Test Variables */
|
|
/* PER test mode */
|
|
#define M_PKTENG_CTRL (0x6c * 2)
|
|
/* IFS for TX mode */
|
|
#define M_PKTENG_IFS (0x6d * 2)
|
|
/* Lower word of tx frmcnt/rx lostcnt */
|
|
#define M_PKTENG_FRMCNT_LO (0x6e * 2)
|
|
/* Upper word of tx frmcnt/rx lostcnt */
|
|
#define M_PKTENG_FRMCNT_HI (0x6f * 2)
|
|
|
|
/* Index variation in vbat ripple */
|
|
#define M_LCN_PWR_IDX_MAX (0x67 * 2) /* highest index read by ucode */
|
|
#define M_LCN_PWR_IDX_MIN (0x66 * 2) /* lowest index read by ucode */
|
|
|
|
/* M_PKTENG_CTRL bit definitions */
|
|
#define M_PKTENG_MODE_TX 0x0001
|
|
#define M_PKTENG_MODE_TX_RIFS 0x0004
|
|
#define M_PKTENG_MODE_TX_CTS 0x0008
|
|
#define M_PKTENG_MODE_RX 0x0002
|
|
#define M_PKTENG_MODE_RX_WITH_ACK 0x0402
|
|
#define M_PKTENG_MODE_MASK 0x0003
|
|
/* TX frames indicated in the frmcnt reg */
|
|
#define M_PKTENG_FRMCNT_VLD 0x0100
|
|
|
|
/* Sample Collect parameters (bitmap and type) */
|
|
/* Trigger bitmap for sample collect */
|
|
#define M_SMPL_COL_BMP (0x37d * 2)
|
|
/* Sample collect type */
|
|
#define M_SMPL_COL_CTL (0x3b2 * 2)
|
|
|
|
#define ANTSEL_CLKDIV_4MHZ 6
|
|
#define MIMO_ANTSEL_BUSY 0x4000 /* bit 14 (busy) */
|
|
#define MIMO_ANTSEL_SEL 0x8000 /* bit 15 write the value */
|
|
#define MIMO_ANTSEL_WAIT 50 /* 50us wait */
|
|
#define MIMO_ANTSEL_OVERRIDE 0x8000 /* flag */
|
|
|
|
struct shm_acparams {
|
|
u16 txop;
|
|
u16 cwmin;
|
|
u16 cwmax;
|
|
u16 cwcur;
|
|
u16 aifs;
|
|
u16 bslots;
|
|
u16 reggap;
|
|
u16 status;
|
|
u16 rsvd[8];
|
|
} __packed;
|
|
#define M_EDCF_QLEN (16 * 2)
|
|
|
|
#define WME_STATUS_NEWAC (1 << 8)
|
|
|
|
/* M_HOST_FLAGS */
|
|
#define MHFMAX 5 /* Number of valid hostflag half-word (u16) */
|
|
#define MHF1 0 /* Hostflag 1 index */
|
|
#define MHF2 1 /* Hostflag 2 index */
|
|
#define MHF3 2 /* Hostflag 3 index */
|
|
#define MHF4 3 /* Hostflag 4 index */
|
|
#define MHF5 4 /* Hostflag 5 index */
|
|
|
|
/* Flags in M_HOST_FLAGS */
|
|
/* Enable ucode antenna diversity help */
|
|
#define MHF1_ANTDIV 0x0001
|
|
/* Enable EDCF access control */
|
|
#define MHF1_EDCF 0x0100
|
|
#define MHF1_IQSWAP_WAR 0x0200
|
|
/* Disable Slow clock request, for corerev < 11 */
|
|
#define MHF1_FORCEFASTCLK 0x0400
|
|
|
|
/* Flags in M_HOST_FLAGS2 */
|
|
|
|
/* Flush BCMC FIFO immediately */
|
|
#define MHF2_TXBCMC_NOW 0x0040
|
|
/* Enable ucode/hw power control */
|
|
#define MHF2_HWPWRCTL 0x0080
|
|
#define MHF2_NPHY40MHZ_WAR 0x0800
|
|
|
|
/* Flags in M_HOST_FLAGS3 */
|
|
/* enabled mimo antenna selection */
|
|
#define MHF3_ANTSEL_EN 0x0001
|
|
/* antenna selection mode: 0: 2x3, 1: 2x4 */
|
|
#define MHF3_ANTSEL_MODE 0x0002
|
|
#define MHF3_RESERVED1 0x0004
|
|
#define MHF3_RESERVED2 0x0008
|
|
#define MHF3_NPHY_MLADV_WAR 0x0010
|
|
|
|
/* Flags in M_HOST_FLAGS4 */
|
|
/* force bphy Tx on core 0 (board level WAR) */
|
|
#define MHF4_BPHY_TXCORE0 0x0080
|
|
/* for 4313A0 FEM boards */
|
|
#define MHF4_EXTPA_ENABLE 0x4000
|
|
|
|
/* Flags in M_HOST_FLAGS5 */
|
|
#define MHF5_4313_GPIOCTRL 0x0001
|
|
#define MHF5_RESERVED1 0x0002
|
|
#define MHF5_RESERVED2 0x0004
|
|
/* Radio power setting for ucode */
|
|
#define M_RADIO_PWR (0x32 * 2)
|
|
|
|
/* phy noise recorded by ucode right after tx */
|
|
#define M_PHY_NOISE (0x037 * 2)
|
|
#define PHY_NOISE_MASK 0x00ff
|
|
|
|
/*
|
|
* Receive Frame Data Header for 802.11b DCF-only frames
|
|
*
|
|
* RxFrameSize: Actual byte length of the frame data received
|
|
* PAD: padding (not used)
|
|
* PhyRxStatus_0: PhyRxStatus 15:0
|
|
* PhyRxStatus_1: PhyRxStatus 31:16
|
|
* PhyRxStatus_2: PhyRxStatus 47:32
|
|
* PhyRxStatus_3: PhyRxStatus 63:48
|
|
* PhyRxStatus_4: PhyRxStatus 79:64
|
|
* PhyRxStatus_5: PhyRxStatus 95:80
|
|
* RxStatus1: MAC Rx Status
|
|
* RxStatus2: extended MAC Rx status
|
|
* RxTSFTime: RxTSFTime time of first MAC symbol + M_PHY_PLCPRX_DLY
|
|
* RxChan: gain code, channel radio code, and phy type
|
|
*/
|
|
struct d11rxhdr_le {
|
|
__le16 RxFrameSize;
|
|
u16 PAD;
|
|
__le16 PhyRxStatus_0;
|
|
__le16 PhyRxStatus_1;
|
|
__le16 PhyRxStatus_2;
|
|
__le16 PhyRxStatus_3;
|
|
__le16 PhyRxStatus_4;
|
|
__le16 PhyRxStatus_5;
|
|
__le16 RxStatus1;
|
|
__le16 RxStatus2;
|
|
__le16 RxTSFTime;
|
|
__le16 RxChan;
|
|
} __packed;
|
|
|
|
struct d11rxhdr {
|
|
u16 RxFrameSize;
|
|
u16 PAD;
|
|
u16 PhyRxStatus_0;
|
|
u16 PhyRxStatus_1;
|
|
u16 PhyRxStatus_2;
|
|
u16 PhyRxStatus_3;
|
|
u16 PhyRxStatus_4;
|
|
u16 PhyRxStatus_5;
|
|
u16 RxStatus1;
|
|
u16 RxStatus2;
|
|
u16 RxTSFTime;
|
|
u16 RxChan;
|
|
} __packed;
|
|
|
|
/* PhyRxStatus_0: */
|
|
/* NPHY only: CCK, OFDM, preN, N */
|
|
#define PRXS0_FT_MASK 0x0003
|
|
/* NPHY only: clip count adjustment steps by AGC */
|
|
#define PRXS0_CLIP_MASK 0x000C
|
|
#define PRXS0_CLIP_SHIFT 2
|
|
/* PHY received a frame with unsupported rate */
|
|
#define PRXS0_UNSRATE 0x0010
|
|
/* GPHY: rx ant, NPHY: upper sideband */
|
|
#define PRXS0_RXANT_UPSUBBAND 0x0020
|
|
/* CCK frame only: lost crs during cck frame reception */
|
|
#define PRXS0_LCRS 0x0040
|
|
/* Short Preamble */
|
|
#define PRXS0_SHORTH 0x0080
|
|
/* PLCP violation */
|
|
#define PRXS0_PLCPFV 0x0100
|
|
/* PLCP header integrity check failed */
|
|
#define PRXS0_PLCPHCF 0x0200
|
|
/* legacy PHY gain control */
|
|
#define PRXS0_GAIN_CTL 0x4000
|
|
/* NPHY: Antennas used for received frame, bitmask */
|
|
#define PRXS0_ANTSEL_MASK 0xF000
|
|
#define PRXS0_ANTSEL_SHIFT 0x12
|
|
|
|
/* subfield PRXS0_FT_MASK */
|
|
#define PRXS0_CCK 0x0000
|
|
/* valid only for G phy, use rxh->RxChan for A phy */
|
|
#define PRXS0_OFDM 0x0001
|
|
#define PRXS0_PREN 0x0002
|
|
#define PRXS0_STDN 0x0003
|
|
|
|
/* subfield PRXS0_ANTSEL_MASK */
|
|
#define PRXS0_ANTSEL_0 0x0 /* antenna 0 is used */
|
|
#define PRXS0_ANTSEL_1 0x2 /* antenna 1 is used */
|
|
#define PRXS0_ANTSEL_2 0x4 /* antenna 2 is used */
|
|
#define PRXS0_ANTSEL_3 0x8 /* antenna 3 is used */
|
|
|
|
/* PhyRxStatus_1: */
|
|
#define PRXS1_JSSI_MASK 0x00FF
|
|
#define PRXS1_JSSI_SHIFT 0
|
|
#define PRXS1_SQ_MASK 0xFF00
|
|
#define PRXS1_SQ_SHIFT 8
|
|
|
|
/* nphy PhyRxStatus_1: */
|
|
#define PRXS1_nphy_PWR0_MASK 0x00FF
|
|
#define PRXS1_nphy_PWR1_MASK 0xFF00
|
|
|
|
/* HTPHY Rx Status defines */
|
|
/* htphy PhyRxStatus_0: those bit are overlapped with PhyRxStatus_0 */
|
|
#define PRXS0_BAND 0x0400 /* 0 = 2.4G, 1 = 5G */
|
|
#define PRXS0_RSVD 0x0800 /* reserved; set to 0 */
|
|
#define PRXS0_UNUSED 0xF000 /* unused and not defined; set to 0 */
|
|
|
|
/* htphy PhyRxStatus_1: */
|
|
/* core enables for {3..0}, 0=disabled, 1=enabled */
|
|
#define PRXS1_HTPHY_CORE_MASK 0x000F
|
|
/* antenna configation */
|
|
#define PRXS1_HTPHY_ANTCFG_MASK 0x00F0
|
|
/* Mixmode PLCP Length low byte mask */
|
|
#define PRXS1_HTPHY_MMPLCPLenL_MASK 0xFF00
|
|
|
|
/* htphy PhyRxStatus_2: */
|
|
/* Mixmode PLCP Length high byte maskw */
|
|
#define PRXS2_HTPHY_MMPLCPLenH_MASK 0x000F
|
|
/* Mixmode PLCP rate mask */
|
|
#define PRXS2_HTPHY_MMPLCH_RATE_MASK 0x00F0
|
|
/* Rx power on core 0 */
|
|
#define PRXS2_HTPHY_RXPWR_ANT0 0xFF00
|
|
|
|
/* htphy PhyRxStatus_3: */
|
|
/* Rx power on core 1 */
|
|
#define PRXS3_HTPHY_RXPWR_ANT1 0x00FF
|
|
/* Rx power on core 2 */
|
|
#define PRXS3_HTPHY_RXPWR_ANT2 0xFF00
|
|
|
|
/* htphy PhyRxStatus_4: */
|
|
/* Rx power on core 3 */
|
|
#define PRXS4_HTPHY_RXPWR_ANT3 0x00FF
|
|
/* Coarse frequency offset */
|
|
#define PRXS4_HTPHY_CFO 0xFF00
|
|
|
|
/* htphy PhyRxStatus_5: */
|
|
/* Fine frequency offset */
|
|
#define PRXS5_HTPHY_FFO 0x00FF
|
|
/* Advance Retard */
|
|
#define PRXS5_HTPHY_AR 0xFF00
|
|
|
|
#define HTPHY_MMPLCPLen(rxs) \
|
|
((((rxs)->PhyRxStatus_1 & PRXS1_HTPHY_MMPLCPLenL_MASK) >> 8) | \
|
|
(((rxs)->PhyRxStatus_2 & PRXS2_HTPHY_MMPLCPLenH_MASK) << 8))
|
|
/* Get Rx power on core 0 */
|
|
#define HTPHY_RXPWR_ANT0(rxs) \
|
|
((((rxs)->PhyRxStatus_2) & PRXS2_HTPHY_RXPWR_ANT0) >> 8)
|
|
/* Get Rx power on core 1 */
|
|
#define HTPHY_RXPWR_ANT1(rxs) \
|
|
(((rxs)->PhyRxStatus_3) & PRXS3_HTPHY_RXPWR_ANT1)
|
|
/* Get Rx power on core 2 */
|
|
#define HTPHY_RXPWR_ANT2(rxs) \
|
|
((((rxs)->PhyRxStatus_3) & PRXS3_HTPHY_RXPWR_ANT2) >> 8)
|
|
|
|
/* ucode RxStatus1: */
|
|
#define RXS_BCNSENT 0x8000
|
|
#define RXS_SECKINDX_MASK 0x07e0
|
|
#define RXS_SECKINDX_SHIFT 5
|
|
#define RXS_DECERR (1 << 4)
|
|
#define RXS_DECATMPT (1 << 3)
|
|
/* PAD bytes to make IP data 4 bytes aligned */
|
|
#define RXS_PBPRES (1 << 2)
|
|
#define RXS_RESPFRAMETX (1 << 1)
|
|
#define RXS_FCSERR (1 << 0)
|
|
|
|
/* ucode RxStatus2: */
|
|
#define RXS_AMSDU_MASK 1
|
|
#define RXS_AGGTYPE_MASK 0x6
|
|
#define RXS_AGGTYPE_SHIFT 1
|
|
#define RXS_PHYRXST_VALID (1 << 8)
|
|
#define RXS_RXANT_MASK 0x3
|
|
#define RXS_RXANT_SHIFT 12
|
|
|
|
/* RxChan */
|
|
#define RXS_CHAN_40 0x1000
|
|
#define RXS_CHAN_5G 0x0800
|
|
#define RXS_CHAN_ID_MASK 0x07f8
|
|
#define RXS_CHAN_ID_SHIFT 3
|
|
#define RXS_CHAN_PHYTYPE_MASK 0x0007
|
|
#define RXS_CHAN_PHYTYPE_SHIFT 0
|
|
|
|
/* Index of attenuations used during ucode power control. */
|
|
#define M_PWRIND_BLKS (0x184 * 2)
|
|
#define M_PWRIND_MAP0 (M_PWRIND_BLKS + 0x0)
|
|
#define M_PWRIND_MAP1 (M_PWRIND_BLKS + 0x2)
|
|
#define M_PWRIND_MAP2 (M_PWRIND_BLKS + 0x4)
|
|
#define M_PWRIND_MAP3 (M_PWRIND_BLKS + 0x6)
|
|
/* M_PWRIND_MAP(core) macro */
|
|
#define M_PWRIND_MAP(core) (M_PWRIND_BLKS + ((core)<<1))
|
|
|
|
/* PSM SHM variable offsets */
|
|
#define M_PSM_SOFT_REGS 0x0
|
|
#define M_BOM_REV_MAJOR (M_PSM_SOFT_REGS + 0x0)
|
|
#define M_BOM_REV_MINOR (M_PSM_SOFT_REGS + 0x2)
|
|
#define M_UCODE_DBGST (M_PSM_SOFT_REGS + 0x40) /* ucode debug status code */
|
|
#define M_UCODE_MACSTAT (M_PSM_SOFT_REGS + 0xE0) /* macstat counters */
|
|
|
|
#define M_AGING_THRSH (0x3e * 2) /* max time waiting for medium before tx */
|
|
#define M_MBURST_SIZE (0x40 * 2) /* max frames in a frameburst */
|
|
#define M_MBURST_TXOP (0x41 * 2) /* max frameburst TXOP in unit of us */
|
|
#define M_SYNTHPU_DLY (0x4a * 2) /* pre-wakeup for synthpu, default: 500 */
|
|
#define M_PRETBTT (0x4b * 2)
|
|
|
|
/* offset to the target txpwr */
|
|
#define M_ALT_TXPWR_IDX (M_PSM_SOFT_REGS + (0x3b * 2))
|
|
#define M_PHY_TX_FLT_PTR (M_PSM_SOFT_REGS + (0x3d * 2))
|
|
#define M_CTS_DURATION (M_PSM_SOFT_REGS + (0x5c * 2))
|
|
#define M_LP_RCCAL_OVR (M_PSM_SOFT_REGS + (0x6b * 2))
|
|
|
|
/* PKTENG Rx Stats Block */
|
|
#define M_RXSTATS_BLK_PTR (M_PSM_SOFT_REGS + (0x65 * 2))
|
|
|
|
/* ucode debug status codes */
|
|
/* not valid really */
|
|
#define DBGST_INACTIVE 0
|
|
/* after zeroing SHM, before suspending at init */
|
|
#define DBGST_INIT 1
|
|
/* "normal" state */
|
|
#define DBGST_ACTIVE 2
|
|
/* suspended */
|
|
#define DBGST_SUSPENDED 3
|
|
/* asleep (PS mode) */
|
|
#define DBGST_ASLEEP 4
|
|
|
|
/* Scratch Reg defs */
|
|
enum _ePsmScratchPadRegDefinitions {
|
|
S_RSV0 = 0,
|
|
S_RSV1,
|
|
S_RSV2,
|
|
|
|
/* offset 0x03: scratch registers for Dot11-contants */
|
|
S_DOT11_CWMIN, /* CW-minimum */
|
|
S_DOT11_CWMAX, /* CW-maximum */
|
|
S_DOT11_CWCUR, /* CW-current */
|
|
S_DOT11_SRC_LMT, /* short retry count limit */
|
|
S_DOT11_LRC_LMT, /* long retry count limit */
|
|
S_DOT11_DTIMCOUNT, /* DTIM-count */
|
|
|
|
/* offset 0x09: Tx-side scratch registers */
|
|
S_SEQ_NUM, /* hardware sequence number reg */
|
|
S_SEQ_NUM_FRAG, /* seq num for frags (at the start of MSDU) */
|
|
S_FRMRETX_CNT, /* frame retx count */
|
|
S_SSRC, /* Station short retry count */
|
|
S_SLRC, /* Station long retry count */
|
|
S_EXP_RSP, /* Expected response frame */
|
|
S_OLD_BREM, /* Remaining backoff ctr */
|
|
S_OLD_CWWIN, /* saved-off CW-cur */
|
|
S_TXECTL, /* TXE-Ctl word constructed in scr-pad */
|
|
S_CTXTST, /* frm type-subtype as read from Tx-descr */
|
|
|
|
/* offset 0x13: Rx-side scratch registers */
|
|
S_RXTST, /* Type and subtype in Rxframe */
|
|
|
|
/* Global state register */
|
|
S_STREG, /* state storage actual bit maps below */
|
|
|
|
S_TXPWR_SUM, /* Tx power control: accumulator */
|
|
S_TXPWR_ITER, /* Tx power control: iteration */
|
|
S_RX_FRMTYPE, /* Rate and PHY type for frames */
|
|
S_THIS_AGG, /* Size of this AGG (A-MSDU) */
|
|
|
|
S_KEYINDX,
|
|
S_RXFRMLEN, /* Receive MPDU length in bytes */
|
|
|
|
/* offset 0x1B: Receive TSF time stored in SCR */
|
|
S_RXTSFTMRVAL_WD3, /* TSF value at the start of rx */
|
|
S_RXTSFTMRVAL_WD2, /* TSF value at the start of rx */
|
|
S_RXTSFTMRVAL_WD1, /* TSF value at the start of rx */
|
|
S_RXTSFTMRVAL_WD0, /* TSF value at the start of rx */
|
|
S_RXSSN, /* Received start seq number for A-MPDU BA */
|
|
S_RXQOSFLD, /* Rx-QoS field (if present) */
|
|
|
|
/* offset 0x21: Scratch pad regs used in microcode as temp storage */
|
|
S_TMP0, /* stmp0 */
|
|
S_TMP1, /* stmp1 */
|
|
S_TMP2, /* stmp2 */
|
|
S_TMP3, /* stmp3 */
|
|
S_TMP4, /* stmp4 */
|
|
S_TMP5, /* stmp5 */
|
|
S_PRQPENALTY_CTR, /* Probe response queue penalty counter */
|
|
S_ANTCNT, /* unsuccessful attempts on current ant. */
|
|
S_SYMBOL, /* flag for possible symbol ctl frames */
|
|
S_RXTP, /* rx frame type */
|
|
S_STREG2, /* extra state storage */
|
|
S_STREG3, /* even more extra state storage */
|
|
S_STREG4, /* ... */
|
|
S_STREG5, /* remember to initialize it to zero */
|
|
|
|
S_ADJPWR_IDX,
|
|
S_CUR_PTR, /* Temp pointer for A-MPDU re-Tx SHM table */
|
|
S_REVID4, /* 0x33 */
|
|
S_INDX, /* 0x34 */
|
|
S_ADDR0, /* 0x35 */
|
|
S_ADDR1, /* 0x36 */
|
|
S_ADDR2, /* 0x37 */
|
|
S_ADDR3, /* 0x38 */
|
|
S_ADDR4, /* 0x39 */
|
|
S_ADDR5, /* 0x3A */
|
|
S_TMP6, /* 0x3B */
|
|
S_KEYINDX_BU, /* Backup for Key index */
|
|
S_MFGTEST_TMP0, /* Temp regs used for RX test calculations */
|
|
S_RXESN, /* Received end sequence number for A-MPDU BA */
|
|
S_STREG6, /* 0x3F */
|
|
};
|
|
|
|
#define S_BEACON_INDX S_OLD_BREM
|
|
#define S_PRS_INDX S_OLD_CWWIN
|
|
#define S_PHYTYPE S_SSRC
|
|
#define S_PHYVER S_SLRC
|
|
|
|
/* IHR SLOW_CTRL values */
|
|
#define SLOW_CTRL_PDE (1 << 0)
|
|
#define SLOW_CTRL_FD (1 << 8)
|
|
|
|
/* ucode mac statistic counters in shared memory */
|
|
struct macstat {
|
|
u16 txallfrm; /* 0x80 */
|
|
u16 txrtsfrm; /* 0x82 */
|
|
u16 txctsfrm; /* 0x84 */
|
|
u16 txackfrm; /* 0x86 */
|
|
u16 txdnlfrm; /* 0x88 */
|
|
u16 txbcnfrm; /* 0x8a */
|
|
u16 txfunfl[8]; /* 0x8c - 0x9b */
|
|
u16 txtplunfl; /* 0x9c */
|
|
u16 txphyerr; /* 0x9e */
|
|
u16 pktengrxducast; /* 0xa0 */
|
|
u16 pktengrxdmcast; /* 0xa2 */
|
|
u16 rxfrmtoolong; /* 0xa4 */
|
|
u16 rxfrmtooshrt; /* 0xa6 */
|
|
u16 rxinvmachdr; /* 0xa8 */
|
|
u16 rxbadfcs; /* 0xaa */
|
|
u16 rxbadplcp; /* 0xac */
|
|
u16 rxcrsglitch; /* 0xae */
|
|
u16 rxstrt; /* 0xb0 */
|
|
u16 rxdfrmucastmbss; /* 0xb2 */
|
|
u16 rxmfrmucastmbss; /* 0xb4 */
|
|
u16 rxcfrmucast; /* 0xb6 */
|
|
u16 rxrtsucast; /* 0xb8 */
|
|
u16 rxctsucast; /* 0xba */
|
|
u16 rxackucast; /* 0xbc */
|
|
u16 rxdfrmocast; /* 0xbe */
|
|
u16 rxmfrmocast; /* 0xc0 */
|
|
u16 rxcfrmocast; /* 0xc2 */
|
|
u16 rxrtsocast; /* 0xc4 */
|
|
u16 rxctsocast; /* 0xc6 */
|
|
u16 rxdfrmmcast; /* 0xc8 */
|
|
u16 rxmfrmmcast; /* 0xca */
|
|
u16 rxcfrmmcast; /* 0xcc */
|
|
u16 rxbeaconmbss; /* 0xce */
|
|
u16 rxdfrmucastobss; /* 0xd0 */
|
|
u16 rxbeaconobss; /* 0xd2 */
|
|
u16 rxrsptmout; /* 0xd4 */
|
|
u16 bcntxcancl; /* 0xd6 */
|
|
u16 PAD;
|
|
u16 rxf0ovfl; /* 0xda */
|
|
u16 rxf1ovfl; /* 0xdc */
|
|
u16 rxf2ovfl; /* 0xde */
|
|
u16 txsfovfl; /* 0xe0 */
|
|
u16 pmqovfl; /* 0xe2 */
|
|
u16 rxcgprqfrm; /* 0xe4 */
|
|
u16 rxcgprsqovfl; /* 0xe6 */
|
|
u16 txcgprsfail; /* 0xe8 */
|
|
u16 txcgprssuc; /* 0xea */
|
|
u16 prs_timeout; /* 0xec */
|
|
u16 rxnack;
|
|
u16 frmscons;
|
|
u16 txnack;
|
|
u16 txglitch_nack;
|
|
u16 txburst; /* 0xf6 # tx bursts */
|
|
u16 bphy_rxcrsglitch; /* bphy rx crs glitch */
|
|
u16 phywatchdog; /* 0xfa # of phy watchdog events */
|
|
u16 PAD;
|
|
u16 bphy_badplcp; /* bphy bad plcp */
|
|
};
|
|
|
|
/* dot11 core-specific control flags */
|
|
#define SICF_PCLKE 0x0004 /* PHY clock enable */
|
|
#define SICF_PRST 0x0008 /* PHY reset */
|
|
#define SICF_MPCLKE 0x0010 /* MAC PHY clockcontrol enable */
|
|
#define SICF_FREF 0x0020 /* PLL FreqRefSelect */
|
|
/* NOTE: the following bw bits only apply when the core is attached
|
|
* to a NPHY
|
|
*/
|
|
#define SICF_BWMASK 0x00c0 /* phy clock mask (b6 & b7) */
|
|
#define SICF_BW40 0x0080 /* 40MHz BW (160MHz phyclk) */
|
|
#define SICF_BW20 0x0040 /* 20MHz BW (80MHz phyclk) */
|
|
#define SICF_BW10 0x0000 /* 10MHz BW (40MHz phyclk) */
|
|
#define SICF_GMODE 0x2000 /* gmode enable */
|
|
|
|
/* dot11 core-specific status flags */
|
|
#define SISF_2G_PHY 0x0001 /* 2.4G capable phy */
|
|
#define SISF_5G_PHY 0x0002 /* 5G capable phy */
|
|
#define SISF_FCLKA 0x0004 /* FastClkAvailable */
|
|
#define SISF_DB_PHY 0x0008 /* Dualband phy */
|
|
|
|
/* === End of MAC reg, Beginning of PHY(b/a/g/n) reg === */
|
|
/* radio and LPPHY regs are separated */
|
|
|
|
#define BPHY_REG_OFT_BASE 0x0
|
|
/* offsets for indirect access to bphy registers */
|
|
#define BPHY_BB_CONFIG 0x01
|
|
#define BPHY_ADCBIAS 0x02
|
|
#define BPHY_ANACORE 0x03
|
|
#define BPHY_PHYCRSTH 0x06
|
|
#define BPHY_TEST 0x0a
|
|
#define BPHY_PA_TX_TO 0x10
|
|
#define BPHY_SYNTH_DC_TO 0x11
|
|
#define BPHY_PA_TX_TIME_UP 0x12
|
|
#define BPHY_RX_FLTR_TIME_UP 0x13
|
|
#define BPHY_TX_POWER_OVERRIDE 0x14
|
|
#define BPHY_RF_OVERRIDE 0x15
|
|
#define BPHY_RF_TR_LOOKUP1 0x16
|
|
#define BPHY_RF_TR_LOOKUP2 0x17
|
|
#define BPHY_COEFFS 0x18
|
|
#define BPHY_PLL_OUT 0x19
|
|
#define BPHY_REFRESH_MAIN 0x1a
|
|
#define BPHY_REFRESH_TO0 0x1b
|
|
#define BPHY_REFRESH_TO1 0x1c
|
|
#define BPHY_RSSI_TRESH 0x20
|
|
#define BPHY_IQ_TRESH_HH 0x21
|
|
#define BPHY_IQ_TRESH_H 0x22
|
|
#define BPHY_IQ_TRESH_L 0x23
|
|
#define BPHY_IQ_TRESH_LL 0x24
|
|
#define BPHY_GAIN 0x25
|
|
#define BPHY_LNA_GAIN_RANGE 0x26
|
|
#define BPHY_JSSI 0x27
|
|
#define BPHY_TSSI_CTL 0x28
|
|
#define BPHY_TSSI 0x29
|
|
#define BPHY_TR_LOSS_CTL 0x2a
|
|
#define BPHY_LO_LEAKAGE 0x2b
|
|
#define BPHY_LO_RSSI_ACC 0x2c
|
|
#define BPHY_LO_IQMAG_ACC 0x2d
|
|
#define BPHY_TX_DC_OFF1 0x2e
|
|
#define BPHY_TX_DC_OFF2 0x2f
|
|
#define BPHY_PEAK_CNT_THRESH 0x30
|
|
#define BPHY_FREQ_OFFSET 0x31
|
|
#define BPHY_DIVERSITY_CTL 0x32
|
|
#define BPHY_PEAK_ENERGY_LO 0x33
|
|
#define BPHY_PEAK_ENERGY_HI 0x34
|
|
#define BPHY_SYNC_CTL 0x35
|
|
#define BPHY_TX_PWR_CTRL 0x36
|
|
#define BPHY_TX_EST_PWR 0x37
|
|
#define BPHY_STEP 0x38
|
|
#define BPHY_WARMUP 0x39
|
|
#define BPHY_LMS_CFF_READ 0x3a
|
|
#define BPHY_LMS_COEFF_I 0x3b
|
|
#define BPHY_LMS_COEFF_Q 0x3c
|
|
#define BPHY_SIG_POW 0x3d
|
|
#define BPHY_RFDC_CANCEL_CTL 0x3e
|
|
#define BPHY_HDR_TYPE 0x40
|
|
#define BPHY_SFD_TO 0x41
|
|
#define BPHY_SFD_CTL 0x42
|
|
#define BPHY_DEBUG 0x43
|
|
#define BPHY_RX_DELAY_COMP 0x44
|
|
#define BPHY_CRS_DROP_TO 0x45
|
|
#define BPHY_SHORT_SFD_NZEROS 0x46
|
|
#define BPHY_DSSS_COEFF1 0x48
|
|
#define BPHY_DSSS_COEFF2 0x49
|
|
#define BPHY_CCK_COEFF1 0x4a
|
|
#define BPHY_CCK_COEFF2 0x4b
|
|
#define BPHY_TR_CORR 0x4c
|
|
#define BPHY_ANGLE_SCALE 0x4d
|
|
#define BPHY_TX_PWR_BASE_IDX 0x4e
|
|
#define BPHY_OPTIONAL_MODES2 0x4f
|
|
#define BPHY_CCK_LMS_STEP 0x50
|
|
#define BPHY_BYPASS 0x51
|
|
#define BPHY_CCK_DELAY_LONG 0x52
|
|
#define BPHY_CCK_DELAY_SHORT 0x53
|
|
#define BPHY_PPROC_CHAN_DELAY 0x54
|
|
#define BPHY_DDFS_ENABLE 0x58
|
|
#define BPHY_PHASE_SCALE 0x59
|
|
#define BPHY_FREQ_CONTROL 0x5a
|
|
#define BPHY_LNA_GAIN_RANGE_10 0x5b
|
|
#define BPHY_LNA_GAIN_RANGE_32 0x5c
|
|
#define BPHY_OPTIONAL_MODES 0x5d
|
|
#define BPHY_RX_STATUS2 0x5e
|
|
#define BPHY_RX_STATUS3 0x5f
|
|
#define BPHY_DAC_CONTROL 0x60
|
|
#define BPHY_ANA11G_FILT_CTRL 0x62
|
|
#define BPHY_REFRESH_CTRL 0x64
|
|
#define BPHY_RF_OVERRIDE2 0x65
|
|
#define BPHY_SPUR_CANCEL_CTRL 0x66
|
|
#define BPHY_FINE_DIGIGAIN_CTRL 0x67
|
|
#define BPHY_RSSI_LUT 0x88
|
|
#define BPHY_RSSI_LUT_END 0xa7
|
|
#define BPHY_TSSI_LUT 0xa8
|
|
#define BPHY_TSSI_LUT_END 0xc7
|
|
#define BPHY_TSSI2PWR_LUT 0x380
|
|
#define BPHY_TSSI2PWR_LUT_END 0x39f
|
|
#define BPHY_LOCOMP_LUT 0x3a0
|
|
#define BPHY_LOCOMP_LUT_END 0x3bf
|
|
#define BPHY_TXGAIN_LUT 0x3c0
|
|
#define BPHY_TXGAIN_LUT_END 0x3ff
|
|
|
|
/* Bits in BB_CONFIG: */
|
|
#define PHY_BBC_ANT_MASK 0x0180
|
|
#define PHY_BBC_ANT_SHIFT 7
|
|
#define BB_DARWIN 0x1000
|
|
#define BBCFG_RESETCCA 0x4000
|
|
#define BBCFG_RESETRX 0x8000
|
|
|
|
/* Bits in phytest(0x0a): */
|
|
#define TST_DDFS 0x2000
|
|
#define TST_TXFILT1 0x0800
|
|
#define TST_UNSCRAM 0x0400
|
|
#define TST_CARR_SUPP 0x0200
|
|
#define TST_DC_COMP_LOOP 0x0100
|
|
#define TST_LOOPBACK 0x0080
|
|
#define TST_TXFILT0 0x0040
|
|
#define TST_TXTEST_ENABLE 0x0020
|
|
#define TST_TXTEST_RATE 0x0018
|
|
#define TST_TXTEST_PHASE 0x0007
|
|
|
|
/* phytest txTestRate values */
|
|
#define TST_TXTEST_RATE_1MBPS 0
|
|
#define TST_TXTEST_RATE_2MBPS 1
|
|
#define TST_TXTEST_RATE_5_5MBPS 2
|
|
#define TST_TXTEST_RATE_11MBPS 3
|
|
#define TST_TXTEST_RATE_SHIFT 3
|
|
|
|
#define SHM_BYT_CNT 0x2 /* IHR location */
|
|
#define MAX_BYT_CNT 0x600 /* Maximum frame len */
|
|
|
|
struct d11cnt {
|
|
u32 txfrag;
|
|
u32 txmulti;
|
|
u32 txfail;
|
|
u32 txretry;
|
|
u32 txretrie;
|
|
u32 rxdup;
|
|
u32 txrts;
|
|
u32 txnocts;
|
|
u32 txnoack;
|
|
u32 rxfrag;
|
|
u32 rxmulti;
|
|
u32 rxcrc;
|
|
u32 txfrmsnt;
|
|
u32 rxundec;
|
|
};
|
|
|
|
#endif /* _BRCM_D11_H_ */
|