WSL2-Linux-Kernel/drivers/hwmon/max1111.c

247 строки
5.4 KiB
C

/*
* max1111.c - +2.7V, Low-Power, Multichannel, Serial 8-bit ADCs
*
* Based on arch/arm/mach-pxa/corgi_ssp.c
*
* Copyright (C) 2004-2005 Richard Purdie
*
* Copyright (C) 2008 Marvell International Ltd.
* Eric Miao <eric.miao@marvell.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#define MAX1111_TX_BUF_SIZE 1
#define MAX1111_RX_BUF_SIZE 2
/* MAX1111 Commands */
#define MAX1111_CTRL_PD0 (1u << 0)
#define MAX1111_CTRL_PD1 (1u << 1)
#define MAX1111_CTRL_SGL (1u << 2)
#define MAX1111_CTRL_UNI (1u << 3)
#define MAX1111_CTRL_SEL_SH (5) /* NOTE: bit 4 is ignored */
#define MAX1111_CTRL_STR (1u << 7)
struct max1111_data {
struct spi_device *spi;
struct device *hwmon_dev;
struct spi_message msg;
struct spi_transfer xfer[2];
uint8_t *tx_buf;
uint8_t *rx_buf;
};
static int max1111_read(struct device *dev, int channel)
{
struct max1111_data *data = dev_get_drvdata(dev);
uint8_t v1, v2;
int err;
data->tx_buf[0] = (channel << MAX1111_CTRL_SEL_SH) |
MAX1111_CTRL_PD0 | MAX1111_CTRL_PD1 |
MAX1111_CTRL_SGL | MAX1111_CTRL_UNI | MAX1111_CTRL_STR;
err = spi_sync(data->spi, &data->msg);
if (err < 0) {
dev_err(dev, "spi_sync failed with %d\n", err);
return err;
}
v1 = data->rx_buf[0];
v2 = data->rx_buf[1];
if ((v1 & 0xc0) || (v2 & 0x3f))
return -EINVAL;
return (v1 << 2) | (v2 >> 6);
}
#ifdef CONFIG_SHARPSL_PM
static struct max1111_data *the_max1111;
int max1111_read_channel(int channel)
{
return max1111_read(&the_max1111->spi->dev, channel);
}
EXPORT_SYMBOL(max1111_read_channel);
#endif
/*
* NOTE: SPI devices do not have a default 'name' attribute, which is
* likely to be used by hwmon applications to distinguish between
* different devices, explicitly add a name attribute here.
*/
static ssize_t show_name(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "max1111\n");
}
static ssize_t show_adc(struct device *dev,
struct device_attribute *attr, char *buf)
{
int channel = to_sensor_dev_attr(attr)->index;
int ret;
ret = max1111_read(dev, channel);
if (ret < 0)
return ret;
return sprintf(buf, "%d\n", ret);
}
#define MAX1111_ADC_ATTR(_id) \
SENSOR_DEVICE_ATTR(adc##_id##_in, S_IRUGO, show_adc, NULL, _id)
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
static MAX1111_ADC_ATTR(0);
static MAX1111_ADC_ATTR(1);
static MAX1111_ADC_ATTR(2);
static MAX1111_ADC_ATTR(3);
static struct attribute *max1111_attributes[] = {
&dev_attr_name.attr,
&sensor_dev_attr_adc0_in.dev_attr.attr,
&sensor_dev_attr_adc1_in.dev_attr.attr,
&sensor_dev_attr_adc2_in.dev_attr.attr,
&sensor_dev_attr_adc3_in.dev_attr.attr,
NULL,
};
static const struct attribute_group max1111_attr_group = {
.attrs = max1111_attributes,
};
static int setup_transfer(struct max1111_data *data)
{
struct spi_message *m;
struct spi_transfer *x;
data->tx_buf = kmalloc(MAX1111_TX_BUF_SIZE, GFP_KERNEL);
if (!data->tx_buf)
return -ENOMEM;
data->rx_buf = kmalloc(MAX1111_RX_BUF_SIZE, GFP_KERNEL);
if (!data->rx_buf) {
kfree(data->tx_buf);
return -ENOMEM;
}
m = &data->msg;
x = &data->xfer[0];
spi_message_init(m);
x->tx_buf = &data->tx_buf[0];
x->len = 1;
spi_message_add_tail(x, m);
x++;
x->rx_buf = &data->rx_buf[0];
x->len = 2;
spi_message_add_tail(x, m);
return 0;
}
static int __devinit max1111_probe(struct spi_device *spi)
{
struct max1111_data *data;
int err;
spi->bits_per_word = 8;
spi->mode = SPI_MODE_0;
err = spi_setup(spi);
if (err < 0)
return err;
data = kzalloc(sizeof(struct max1111_data), GFP_KERNEL);
if (data == NULL) {
dev_err(&spi->dev, "failed to allocate memory\n");
return -ENOMEM;
}
err = setup_transfer(data);
if (err)
goto err_free_data;
data->spi = spi;
spi_set_drvdata(spi, data);
err = sysfs_create_group(&spi->dev.kobj, &max1111_attr_group);
if (err) {
dev_err(&spi->dev, "failed to create attribute group\n");
goto err_free_all;
}
data->hwmon_dev = hwmon_device_register(&spi->dev);
if (IS_ERR(data->hwmon_dev)) {
dev_err(&spi->dev, "failed to create hwmon device\n");
err = PTR_ERR(data->hwmon_dev);
goto err_remove;
}
#ifdef CONFIG_SHARPSL_PM
the_max1111 = data;
#endif
return 0;
err_remove:
sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group);
err_free_all:
kfree(data->rx_buf);
kfree(data->tx_buf);
err_free_data:
kfree(data);
return err;
}
static int __devexit max1111_remove(struct spi_device *spi)
{
struct max1111_data *data = spi_get_drvdata(spi);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&spi->dev.kobj, &max1111_attr_group);
kfree(data->rx_buf);
kfree(data->tx_buf);
kfree(data);
return 0;
}
static struct spi_driver max1111_driver = {
.driver = {
.name = "max1111",
.owner = THIS_MODULE,
},
.probe = max1111_probe,
.remove = __devexit_p(max1111_remove),
};
static int __init max1111_init(void)
{
return spi_register_driver(&max1111_driver);
}
module_init(max1111_init);
static void __exit max1111_exit(void)
{
spi_unregister_driver(&max1111_driver);
}
module_exit(max1111_exit);
MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
MODULE_DESCRIPTION("MAX1111 ADC Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("spi:max1111");