1114 строки
30 KiB
C
1114 строки
30 KiB
C
/*
|
|
* Copyright 2014 IBM Corp.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/pci_regs.h>
|
|
#include <linux/pci_ids.h>
|
|
#include <linux/device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sort.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/of.h>
|
|
#include <linux/delay.h>
|
|
#include <asm/opal.h>
|
|
#include <asm/msi_bitmap.h>
|
|
#include <asm/pci-bridge.h> /* for struct pci_controller */
|
|
#include <asm/pnv-pci.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "cxl.h"
|
|
|
|
|
|
#define CXL_PCI_VSEC_ID 0x1280
|
|
#define CXL_VSEC_MIN_SIZE 0x80
|
|
|
|
#define CXL_READ_VSEC_LENGTH(dev, vsec, dest) \
|
|
{ \
|
|
pci_read_config_word(dev, vsec + 0x6, dest); \
|
|
*dest >>= 4; \
|
|
}
|
|
#define CXL_READ_VSEC_NAFUS(dev, vsec, dest) \
|
|
pci_read_config_byte(dev, vsec + 0x8, dest)
|
|
|
|
#define CXL_READ_VSEC_STATUS(dev, vsec, dest) \
|
|
pci_read_config_byte(dev, vsec + 0x9, dest)
|
|
#define CXL_STATUS_SECOND_PORT 0x80
|
|
#define CXL_STATUS_MSI_X_FULL 0x40
|
|
#define CXL_STATUS_MSI_X_SINGLE 0x20
|
|
#define CXL_STATUS_FLASH_RW 0x08
|
|
#define CXL_STATUS_FLASH_RO 0x04
|
|
#define CXL_STATUS_LOADABLE_AFU 0x02
|
|
#define CXL_STATUS_LOADABLE_PSL 0x01
|
|
/* If we see these features we won't try to use the card */
|
|
#define CXL_UNSUPPORTED_FEATURES \
|
|
(CXL_STATUS_MSI_X_FULL | CXL_STATUS_MSI_X_SINGLE)
|
|
|
|
#define CXL_READ_VSEC_MODE_CONTROL(dev, vsec, dest) \
|
|
pci_read_config_byte(dev, vsec + 0xa, dest)
|
|
#define CXL_WRITE_VSEC_MODE_CONTROL(dev, vsec, val) \
|
|
pci_write_config_byte(dev, vsec + 0xa, val)
|
|
#define CXL_VSEC_PROTOCOL_MASK 0xe0
|
|
#define CXL_VSEC_PROTOCOL_1024TB 0x80
|
|
#define CXL_VSEC_PROTOCOL_512TB 0x40
|
|
#define CXL_VSEC_PROTOCOL_256TB 0x20 /* Power 8 uses this */
|
|
#define CXL_VSEC_PROTOCOL_ENABLE 0x01
|
|
|
|
#define CXL_READ_VSEC_PSL_REVISION(dev, vsec, dest) \
|
|
pci_read_config_word(dev, vsec + 0xc, dest)
|
|
#define CXL_READ_VSEC_CAIA_MINOR(dev, vsec, dest) \
|
|
pci_read_config_byte(dev, vsec + 0xe, dest)
|
|
#define CXL_READ_VSEC_CAIA_MAJOR(dev, vsec, dest) \
|
|
pci_read_config_byte(dev, vsec + 0xf, dest)
|
|
#define CXL_READ_VSEC_BASE_IMAGE(dev, vsec, dest) \
|
|
pci_read_config_word(dev, vsec + 0x10, dest)
|
|
|
|
#define CXL_READ_VSEC_IMAGE_STATE(dev, vsec, dest) \
|
|
pci_read_config_byte(dev, vsec + 0x13, dest)
|
|
#define CXL_WRITE_VSEC_IMAGE_STATE(dev, vsec, val) \
|
|
pci_write_config_byte(dev, vsec + 0x13, val)
|
|
#define CXL_VSEC_USER_IMAGE_LOADED 0x80 /* RO */
|
|
#define CXL_VSEC_PERST_LOADS_IMAGE 0x20 /* RW */
|
|
#define CXL_VSEC_PERST_SELECT_USER 0x10 /* RW */
|
|
|
|
#define CXL_READ_VSEC_AFU_DESC_OFF(dev, vsec, dest) \
|
|
pci_read_config_dword(dev, vsec + 0x20, dest)
|
|
#define CXL_READ_VSEC_AFU_DESC_SIZE(dev, vsec, dest) \
|
|
pci_read_config_dword(dev, vsec + 0x24, dest)
|
|
#define CXL_READ_VSEC_PS_OFF(dev, vsec, dest) \
|
|
pci_read_config_dword(dev, vsec + 0x28, dest)
|
|
#define CXL_READ_VSEC_PS_SIZE(dev, vsec, dest) \
|
|
pci_read_config_dword(dev, vsec + 0x2c, dest)
|
|
|
|
|
|
/* This works a little different than the p1/p2 register accesses to make it
|
|
* easier to pull out individual fields */
|
|
#define AFUD_READ(afu, off) in_be64(afu->afu_desc_mmio + off)
|
|
#define EXTRACT_PPC_BIT(val, bit) (!!(val & PPC_BIT(bit)))
|
|
#define EXTRACT_PPC_BITS(val, bs, be) ((val & PPC_BITMASK(bs, be)) >> PPC_BITLSHIFT(be))
|
|
|
|
#define AFUD_READ_INFO(afu) AFUD_READ(afu, 0x0)
|
|
#define AFUD_NUM_INTS_PER_PROC(val) EXTRACT_PPC_BITS(val, 0, 15)
|
|
#define AFUD_NUM_PROCS(val) EXTRACT_PPC_BITS(val, 16, 31)
|
|
#define AFUD_NUM_CRS(val) EXTRACT_PPC_BITS(val, 32, 47)
|
|
#define AFUD_MULTIMODE(val) EXTRACT_PPC_BIT(val, 48)
|
|
#define AFUD_PUSH_BLOCK_TRANSFER(val) EXTRACT_PPC_BIT(val, 55)
|
|
#define AFUD_DEDICATED_PROCESS(val) EXTRACT_PPC_BIT(val, 59)
|
|
#define AFUD_AFU_DIRECTED(val) EXTRACT_PPC_BIT(val, 61)
|
|
#define AFUD_TIME_SLICED(val) EXTRACT_PPC_BIT(val, 63)
|
|
#define AFUD_READ_CR(afu) AFUD_READ(afu, 0x20)
|
|
#define AFUD_CR_LEN(val) EXTRACT_PPC_BITS(val, 8, 63)
|
|
#define AFUD_READ_CR_OFF(afu) AFUD_READ(afu, 0x28)
|
|
#define AFUD_READ_PPPSA(afu) AFUD_READ(afu, 0x30)
|
|
#define AFUD_PPPSA_PP(val) EXTRACT_PPC_BIT(val, 6)
|
|
#define AFUD_PPPSA_PSA(val) EXTRACT_PPC_BIT(val, 7)
|
|
#define AFUD_PPPSA_LEN(val) EXTRACT_PPC_BITS(val, 8, 63)
|
|
#define AFUD_READ_PPPSA_OFF(afu) AFUD_READ(afu, 0x38)
|
|
#define AFUD_READ_EB(afu) AFUD_READ(afu, 0x40)
|
|
#define AFUD_EB_LEN(val) EXTRACT_PPC_BITS(val, 8, 63)
|
|
#define AFUD_READ_EB_OFF(afu) AFUD_READ(afu, 0x48)
|
|
|
|
u16 cxl_afu_cr_read16(struct cxl_afu *afu, int cr, u64 off)
|
|
{
|
|
u64 aligned_off = off & ~0x3L;
|
|
u32 val;
|
|
|
|
val = cxl_afu_cr_read32(afu, cr, aligned_off);
|
|
return (val >> ((off & 0x2) * 8)) & 0xffff;
|
|
}
|
|
|
|
u8 cxl_afu_cr_read8(struct cxl_afu *afu, int cr, u64 off)
|
|
{
|
|
u64 aligned_off = off & ~0x3L;
|
|
u32 val;
|
|
|
|
val = cxl_afu_cr_read32(afu, cr, aligned_off);
|
|
return (val >> ((off & 0x3) * 8)) & 0xff;
|
|
}
|
|
|
|
static DEFINE_PCI_DEVICE_TABLE(cxl_pci_tbl) = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_IBM, 0x0477), },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_IBM, 0x044b), },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_IBM, 0x04cf), },
|
|
{ PCI_DEVICE_CLASS(0x120000, ~0), },
|
|
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, cxl_pci_tbl);
|
|
|
|
|
|
/*
|
|
* Mostly using these wrappers to avoid confusion:
|
|
* priv 1 is BAR2, while priv 2 is BAR0
|
|
*/
|
|
static inline resource_size_t p1_base(struct pci_dev *dev)
|
|
{
|
|
return pci_resource_start(dev, 2);
|
|
}
|
|
|
|
static inline resource_size_t p1_size(struct pci_dev *dev)
|
|
{
|
|
return pci_resource_len(dev, 2);
|
|
}
|
|
|
|
static inline resource_size_t p2_base(struct pci_dev *dev)
|
|
{
|
|
return pci_resource_start(dev, 0);
|
|
}
|
|
|
|
static inline resource_size_t p2_size(struct pci_dev *dev)
|
|
{
|
|
return pci_resource_len(dev, 0);
|
|
}
|
|
|
|
static int find_cxl_vsec(struct pci_dev *dev)
|
|
{
|
|
int vsec = 0;
|
|
u16 val;
|
|
|
|
while ((vsec = pci_find_next_ext_capability(dev, vsec, PCI_EXT_CAP_ID_VNDR))) {
|
|
pci_read_config_word(dev, vsec + 0x4, &val);
|
|
if (val == CXL_PCI_VSEC_ID)
|
|
return vsec;
|
|
}
|
|
return 0;
|
|
|
|
}
|
|
|
|
static void dump_cxl_config_space(struct pci_dev *dev)
|
|
{
|
|
int vsec;
|
|
u32 val;
|
|
|
|
dev_info(&dev->dev, "dump_cxl_config_space\n");
|
|
|
|
pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &val);
|
|
dev_info(&dev->dev, "BAR0: %#.8x\n", val);
|
|
pci_read_config_dword(dev, PCI_BASE_ADDRESS_1, &val);
|
|
dev_info(&dev->dev, "BAR1: %#.8x\n", val);
|
|
pci_read_config_dword(dev, PCI_BASE_ADDRESS_2, &val);
|
|
dev_info(&dev->dev, "BAR2: %#.8x\n", val);
|
|
pci_read_config_dword(dev, PCI_BASE_ADDRESS_3, &val);
|
|
dev_info(&dev->dev, "BAR3: %#.8x\n", val);
|
|
pci_read_config_dword(dev, PCI_BASE_ADDRESS_4, &val);
|
|
dev_info(&dev->dev, "BAR4: %#.8x\n", val);
|
|
pci_read_config_dword(dev, PCI_BASE_ADDRESS_5, &val);
|
|
dev_info(&dev->dev, "BAR5: %#.8x\n", val);
|
|
|
|
dev_info(&dev->dev, "p1 regs: %#llx, len: %#llx\n",
|
|
p1_base(dev), p1_size(dev));
|
|
dev_info(&dev->dev, "p2 regs: %#llx, len: %#llx\n",
|
|
p1_base(dev), p2_size(dev));
|
|
dev_info(&dev->dev, "BAR 4/5: %#llx, len: %#llx\n",
|
|
pci_resource_start(dev, 4), pci_resource_len(dev, 4));
|
|
|
|
if (!(vsec = find_cxl_vsec(dev)))
|
|
return;
|
|
|
|
#define show_reg(name, what) \
|
|
dev_info(&dev->dev, "cxl vsec: %30s: %#x\n", name, what)
|
|
|
|
pci_read_config_dword(dev, vsec + 0x0, &val);
|
|
show_reg("Cap ID", (val >> 0) & 0xffff);
|
|
show_reg("Cap Ver", (val >> 16) & 0xf);
|
|
show_reg("Next Cap Ptr", (val >> 20) & 0xfff);
|
|
pci_read_config_dword(dev, vsec + 0x4, &val);
|
|
show_reg("VSEC ID", (val >> 0) & 0xffff);
|
|
show_reg("VSEC Rev", (val >> 16) & 0xf);
|
|
show_reg("VSEC Length", (val >> 20) & 0xfff);
|
|
pci_read_config_dword(dev, vsec + 0x8, &val);
|
|
show_reg("Num AFUs", (val >> 0) & 0xff);
|
|
show_reg("Status", (val >> 8) & 0xff);
|
|
show_reg("Mode Control", (val >> 16) & 0xff);
|
|
show_reg("Reserved", (val >> 24) & 0xff);
|
|
pci_read_config_dword(dev, vsec + 0xc, &val);
|
|
show_reg("PSL Rev", (val >> 0) & 0xffff);
|
|
show_reg("CAIA Ver", (val >> 16) & 0xffff);
|
|
pci_read_config_dword(dev, vsec + 0x10, &val);
|
|
show_reg("Base Image Rev", (val >> 0) & 0xffff);
|
|
show_reg("Reserved", (val >> 16) & 0x0fff);
|
|
show_reg("Image Control", (val >> 28) & 0x3);
|
|
show_reg("Reserved", (val >> 30) & 0x1);
|
|
show_reg("Image Loaded", (val >> 31) & 0x1);
|
|
|
|
pci_read_config_dword(dev, vsec + 0x14, &val);
|
|
show_reg("Reserved", val);
|
|
pci_read_config_dword(dev, vsec + 0x18, &val);
|
|
show_reg("Reserved", val);
|
|
pci_read_config_dword(dev, vsec + 0x1c, &val);
|
|
show_reg("Reserved", val);
|
|
|
|
pci_read_config_dword(dev, vsec + 0x20, &val);
|
|
show_reg("AFU Descriptor Offset", val);
|
|
pci_read_config_dword(dev, vsec + 0x24, &val);
|
|
show_reg("AFU Descriptor Size", val);
|
|
pci_read_config_dword(dev, vsec + 0x28, &val);
|
|
show_reg("Problem State Offset", val);
|
|
pci_read_config_dword(dev, vsec + 0x2c, &val);
|
|
show_reg("Problem State Size", val);
|
|
|
|
pci_read_config_dword(dev, vsec + 0x30, &val);
|
|
show_reg("Reserved", val);
|
|
pci_read_config_dword(dev, vsec + 0x34, &val);
|
|
show_reg("Reserved", val);
|
|
pci_read_config_dword(dev, vsec + 0x38, &val);
|
|
show_reg("Reserved", val);
|
|
pci_read_config_dword(dev, vsec + 0x3c, &val);
|
|
show_reg("Reserved", val);
|
|
|
|
pci_read_config_dword(dev, vsec + 0x40, &val);
|
|
show_reg("PSL Programming Port", val);
|
|
pci_read_config_dword(dev, vsec + 0x44, &val);
|
|
show_reg("PSL Programming Control", val);
|
|
|
|
pci_read_config_dword(dev, vsec + 0x48, &val);
|
|
show_reg("Reserved", val);
|
|
pci_read_config_dword(dev, vsec + 0x4c, &val);
|
|
show_reg("Reserved", val);
|
|
|
|
pci_read_config_dword(dev, vsec + 0x50, &val);
|
|
show_reg("Flash Address Register", val);
|
|
pci_read_config_dword(dev, vsec + 0x54, &val);
|
|
show_reg("Flash Size Register", val);
|
|
pci_read_config_dword(dev, vsec + 0x58, &val);
|
|
show_reg("Flash Status/Control Register", val);
|
|
pci_read_config_dword(dev, vsec + 0x58, &val);
|
|
show_reg("Flash Data Port", val);
|
|
|
|
#undef show_reg
|
|
}
|
|
|
|
static void dump_afu_descriptor(struct cxl_afu *afu)
|
|
{
|
|
u64 val;
|
|
|
|
#define show_reg(name, what) \
|
|
dev_info(&afu->dev, "afu desc: %30s: %#llx\n", name, what)
|
|
|
|
val = AFUD_READ_INFO(afu);
|
|
show_reg("num_ints_per_process", AFUD_NUM_INTS_PER_PROC(val));
|
|
show_reg("num_of_processes", AFUD_NUM_PROCS(val));
|
|
show_reg("num_of_afu_CRs", AFUD_NUM_CRS(val));
|
|
show_reg("req_prog_mode", val & 0xffffULL);
|
|
|
|
val = AFUD_READ(afu, 0x8);
|
|
show_reg("Reserved", val);
|
|
val = AFUD_READ(afu, 0x10);
|
|
show_reg("Reserved", val);
|
|
val = AFUD_READ(afu, 0x18);
|
|
show_reg("Reserved", val);
|
|
|
|
val = AFUD_READ_CR(afu);
|
|
show_reg("Reserved", (val >> (63-7)) & 0xff);
|
|
show_reg("AFU_CR_len", AFUD_CR_LEN(val));
|
|
|
|
val = AFUD_READ_CR_OFF(afu);
|
|
show_reg("AFU_CR_offset", val);
|
|
|
|
val = AFUD_READ_PPPSA(afu);
|
|
show_reg("PerProcessPSA_control", (val >> (63-7)) & 0xff);
|
|
show_reg("PerProcessPSA Length", AFUD_PPPSA_LEN(val));
|
|
|
|
val = AFUD_READ_PPPSA_OFF(afu);
|
|
show_reg("PerProcessPSA_offset", val);
|
|
|
|
val = AFUD_READ_EB(afu);
|
|
show_reg("Reserved", (val >> (63-7)) & 0xff);
|
|
show_reg("AFU_EB_len", AFUD_EB_LEN(val));
|
|
|
|
val = AFUD_READ_EB_OFF(afu);
|
|
show_reg("AFU_EB_offset", val);
|
|
|
|
#undef show_reg
|
|
}
|
|
|
|
static int init_implementation_adapter_regs(struct cxl *adapter, struct pci_dev *dev)
|
|
{
|
|
struct device_node *np;
|
|
const __be32 *prop;
|
|
u64 psl_dsnctl;
|
|
u64 chipid;
|
|
|
|
if (!(np = pnv_pci_get_phb_node(dev)))
|
|
return -ENODEV;
|
|
|
|
while (np && !(prop = of_get_property(np, "ibm,chip-id", NULL)))
|
|
np = of_get_next_parent(np);
|
|
if (!np)
|
|
return -ENODEV;
|
|
chipid = be32_to_cpup(prop);
|
|
of_node_put(np);
|
|
|
|
/* Tell PSL where to route data to */
|
|
psl_dsnctl = 0x02E8900002000000ULL | (chipid << (63-5));
|
|
cxl_p1_write(adapter, CXL_PSL_DSNDCTL, psl_dsnctl);
|
|
cxl_p1_write(adapter, CXL_PSL_RESLCKTO, 0x20000000200ULL);
|
|
/* snoop write mask */
|
|
cxl_p1_write(adapter, CXL_PSL_SNWRALLOC, 0x00000000FFFFFFFFULL);
|
|
/* set fir_accum */
|
|
cxl_p1_write(adapter, CXL_PSL_FIR_CNTL, 0x0800000000000000ULL);
|
|
/* for debugging with trace arrays */
|
|
cxl_p1_write(adapter, CXL_PSL_TRACE, 0x0000FF7C00000000ULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int init_implementation_afu_regs(struct cxl_afu *afu)
|
|
{
|
|
/* read/write masks for this slice */
|
|
cxl_p1n_write(afu, CXL_PSL_APCALLOC_A, 0xFFFFFFFEFEFEFEFEULL);
|
|
/* APC read/write masks for this slice */
|
|
cxl_p1n_write(afu, CXL_PSL_COALLOC_A, 0xFF000000FEFEFEFEULL);
|
|
/* for debugging with trace arrays */
|
|
cxl_p1n_write(afu, CXL_PSL_SLICE_TRACE, 0x0000FFFF00000000ULL);
|
|
cxl_p1n_write(afu, CXL_PSL_RXCTL_A, CXL_PSL_RXCTL_AFUHP_4S);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int cxl_setup_irq(struct cxl *adapter, unsigned int hwirq,
|
|
unsigned int virq)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(adapter->dev.parent);
|
|
|
|
return pnv_cxl_ioda_msi_setup(dev, hwirq, virq);
|
|
}
|
|
|
|
int cxl_update_image_control(struct cxl *adapter)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(adapter->dev.parent);
|
|
int rc;
|
|
int vsec;
|
|
u8 image_state;
|
|
|
|
if (!(vsec = find_cxl_vsec(dev))) {
|
|
dev_err(&dev->dev, "ABORTING: CXL VSEC not found!\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if ((rc = CXL_READ_VSEC_IMAGE_STATE(dev, vsec, &image_state))) {
|
|
dev_err(&dev->dev, "failed to read image state: %i\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
if (adapter->perst_loads_image)
|
|
image_state |= CXL_VSEC_PERST_LOADS_IMAGE;
|
|
else
|
|
image_state &= ~CXL_VSEC_PERST_LOADS_IMAGE;
|
|
|
|
if (adapter->perst_select_user)
|
|
image_state |= CXL_VSEC_PERST_SELECT_USER;
|
|
else
|
|
image_state &= ~CXL_VSEC_PERST_SELECT_USER;
|
|
|
|
if ((rc = CXL_WRITE_VSEC_IMAGE_STATE(dev, vsec, image_state))) {
|
|
dev_err(&dev->dev, "failed to update image control: %i\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int cxl_alloc_one_irq(struct cxl *adapter)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(adapter->dev.parent);
|
|
|
|
return pnv_cxl_alloc_hwirqs(dev, 1);
|
|
}
|
|
|
|
void cxl_release_one_irq(struct cxl *adapter, int hwirq)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(adapter->dev.parent);
|
|
|
|
return pnv_cxl_release_hwirqs(dev, hwirq, 1);
|
|
}
|
|
|
|
int cxl_alloc_irq_ranges(struct cxl_irq_ranges *irqs, struct cxl *adapter, unsigned int num)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(adapter->dev.parent);
|
|
|
|
return pnv_cxl_alloc_hwirq_ranges(irqs, dev, num);
|
|
}
|
|
|
|
void cxl_release_irq_ranges(struct cxl_irq_ranges *irqs, struct cxl *adapter)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(adapter->dev.parent);
|
|
|
|
pnv_cxl_release_hwirq_ranges(irqs, dev);
|
|
}
|
|
|
|
static int setup_cxl_bars(struct pci_dev *dev)
|
|
{
|
|
/* Safety check in case we get backported to < 3.17 without M64 */
|
|
if ((p1_base(dev) < 0x100000000ULL) ||
|
|
(p2_base(dev) < 0x100000000ULL)) {
|
|
dev_err(&dev->dev, "ABORTING: M32 BAR assignment incompatible with CXL\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* BAR 4/5 has a special meaning for CXL and must be programmed with a
|
|
* special value corresponding to the CXL protocol address range.
|
|
* For POWER 8 that means bits 48:49 must be set to 10
|
|
*/
|
|
pci_write_config_dword(dev, PCI_BASE_ADDRESS_4, 0x00000000);
|
|
pci_write_config_dword(dev, PCI_BASE_ADDRESS_5, 0x00020000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* pciex node: ibm,opal-m64-window = <0x3d058 0x0 0x3d058 0x0 0x8 0x0>; */
|
|
static int switch_card_to_cxl(struct pci_dev *dev)
|
|
{
|
|
int vsec;
|
|
u8 val;
|
|
int rc;
|
|
|
|
dev_info(&dev->dev, "switch card to CXL\n");
|
|
|
|
if (!(vsec = find_cxl_vsec(dev))) {
|
|
dev_err(&dev->dev, "ABORTING: CXL VSEC not found!\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if ((rc = CXL_READ_VSEC_MODE_CONTROL(dev, vsec, &val))) {
|
|
dev_err(&dev->dev, "failed to read current mode control: %i", rc);
|
|
return rc;
|
|
}
|
|
val &= ~CXL_VSEC_PROTOCOL_MASK;
|
|
val |= CXL_VSEC_PROTOCOL_256TB | CXL_VSEC_PROTOCOL_ENABLE;
|
|
if ((rc = CXL_WRITE_VSEC_MODE_CONTROL(dev, vsec, val))) {
|
|
dev_err(&dev->dev, "failed to enable CXL protocol: %i", rc);
|
|
return rc;
|
|
}
|
|
/*
|
|
* The CAIA spec (v0.12 11.6 Bi-modal Device Support) states
|
|
* we must wait 100ms after this mode switch before touching
|
|
* PCIe config space.
|
|
*/
|
|
msleep(100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cxl_map_slice_regs(struct cxl_afu *afu, struct cxl *adapter, struct pci_dev *dev)
|
|
{
|
|
u64 p1n_base, p2n_base, afu_desc;
|
|
const u64 p1n_size = 0x100;
|
|
const u64 p2n_size = 0x1000;
|
|
|
|
p1n_base = p1_base(dev) + 0x10000 + (afu->slice * p1n_size);
|
|
p2n_base = p2_base(dev) + (afu->slice * p2n_size);
|
|
afu->psn_phys = p2_base(dev) + (adapter->ps_off + (afu->slice * adapter->ps_size));
|
|
afu_desc = p2_base(dev) + adapter->afu_desc_off + (afu->slice * adapter->afu_desc_size);
|
|
|
|
if (!(afu->p1n_mmio = ioremap(p1n_base, p1n_size)))
|
|
goto err;
|
|
if (!(afu->p2n_mmio = ioremap(p2n_base, p2n_size)))
|
|
goto err1;
|
|
if (afu_desc) {
|
|
if (!(afu->afu_desc_mmio = ioremap(afu_desc, adapter->afu_desc_size)))
|
|
goto err2;
|
|
}
|
|
|
|
return 0;
|
|
err2:
|
|
iounmap(afu->p2n_mmio);
|
|
err1:
|
|
iounmap(afu->p1n_mmio);
|
|
err:
|
|
dev_err(&afu->dev, "Error mapping AFU MMIO regions\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void cxl_unmap_slice_regs(struct cxl_afu *afu)
|
|
{
|
|
if (afu->p1n_mmio)
|
|
iounmap(afu->p2n_mmio);
|
|
if (afu->p1n_mmio)
|
|
iounmap(afu->p1n_mmio);
|
|
}
|
|
|
|
static void cxl_release_afu(struct device *dev)
|
|
{
|
|
struct cxl_afu *afu = to_cxl_afu(dev);
|
|
|
|
pr_devel("cxl_release_afu\n");
|
|
|
|
kfree(afu);
|
|
}
|
|
|
|
static struct cxl_afu *cxl_alloc_afu(struct cxl *adapter, int slice)
|
|
{
|
|
struct cxl_afu *afu;
|
|
|
|
if (!(afu = kzalloc(sizeof(struct cxl_afu), GFP_KERNEL)))
|
|
return NULL;
|
|
|
|
afu->adapter = adapter;
|
|
afu->dev.parent = &adapter->dev;
|
|
afu->dev.release = cxl_release_afu;
|
|
afu->slice = slice;
|
|
idr_init(&afu->contexts_idr);
|
|
mutex_init(&afu->contexts_lock);
|
|
spin_lock_init(&afu->afu_cntl_lock);
|
|
mutex_init(&afu->spa_mutex);
|
|
|
|
afu->prefault_mode = CXL_PREFAULT_NONE;
|
|
afu->irqs_max = afu->adapter->user_irqs;
|
|
|
|
return afu;
|
|
}
|
|
|
|
/* Expects AFU struct to have recently been zeroed out */
|
|
static int cxl_read_afu_descriptor(struct cxl_afu *afu)
|
|
{
|
|
u64 val;
|
|
|
|
val = AFUD_READ_INFO(afu);
|
|
afu->pp_irqs = AFUD_NUM_INTS_PER_PROC(val);
|
|
afu->max_procs_virtualised = AFUD_NUM_PROCS(val);
|
|
afu->crs_num = AFUD_NUM_CRS(val);
|
|
|
|
if (AFUD_AFU_DIRECTED(val))
|
|
afu->modes_supported |= CXL_MODE_DIRECTED;
|
|
if (AFUD_DEDICATED_PROCESS(val))
|
|
afu->modes_supported |= CXL_MODE_DEDICATED;
|
|
if (AFUD_TIME_SLICED(val))
|
|
afu->modes_supported |= CXL_MODE_TIME_SLICED;
|
|
|
|
val = AFUD_READ_PPPSA(afu);
|
|
afu->pp_size = AFUD_PPPSA_LEN(val) * 4096;
|
|
afu->psa = AFUD_PPPSA_PSA(val);
|
|
if ((afu->pp_psa = AFUD_PPPSA_PP(val)))
|
|
afu->pp_offset = AFUD_READ_PPPSA_OFF(afu);
|
|
|
|
val = AFUD_READ_CR(afu);
|
|
afu->crs_len = AFUD_CR_LEN(val) * 256;
|
|
afu->crs_offset = AFUD_READ_CR_OFF(afu);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cxl_afu_descriptor_looks_ok(struct cxl_afu *afu)
|
|
{
|
|
int i;
|
|
|
|
if (afu->psa && afu->adapter->ps_size <
|
|
(afu->pp_offset + afu->pp_size*afu->max_procs_virtualised)) {
|
|
dev_err(&afu->dev, "per-process PSA can't fit inside the PSA!\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (afu->pp_psa && (afu->pp_size < PAGE_SIZE))
|
|
dev_warn(&afu->dev, "AFU uses < PAGE_SIZE per-process PSA!");
|
|
|
|
for (i = 0; i < afu->crs_num; i++) {
|
|
if ((cxl_afu_cr_read32(afu, i, 0) == 0)) {
|
|
dev_err(&afu->dev, "ABORTING: AFU configuration record %i is invalid\n", i);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sanitise_afu_regs(struct cxl_afu *afu)
|
|
{
|
|
u64 reg;
|
|
|
|
/*
|
|
* Clear out any regs that contain either an IVTE or address or may be
|
|
* waiting on an acknowledgement to try to be a bit safer as we bring
|
|
* it online
|
|
*/
|
|
reg = cxl_p2n_read(afu, CXL_AFU_Cntl_An);
|
|
if ((reg & CXL_AFU_Cntl_An_ES_MASK) != CXL_AFU_Cntl_An_ES_Disabled) {
|
|
dev_warn(&afu->dev, "WARNING: AFU was not disabled: %#.16llx\n", reg);
|
|
if (cxl_afu_reset(afu))
|
|
return -EIO;
|
|
if (cxl_afu_disable(afu))
|
|
return -EIO;
|
|
if (cxl_psl_purge(afu))
|
|
return -EIO;
|
|
}
|
|
cxl_p1n_write(afu, CXL_PSL_SPAP_An, 0x0000000000000000);
|
|
cxl_p1n_write(afu, CXL_PSL_IVTE_Limit_An, 0x0000000000000000);
|
|
cxl_p1n_write(afu, CXL_PSL_IVTE_Offset_An, 0x0000000000000000);
|
|
cxl_p1n_write(afu, CXL_PSL_AMBAR_An, 0x0000000000000000);
|
|
cxl_p1n_write(afu, CXL_PSL_SPOffset_An, 0x0000000000000000);
|
|
cxl_p1n_write(afu, CXL_HAURP_An, 0x0000000000000000);
|
|
cxl_p2n_write(afu, CXL_CSRP_An, 0x0000000000000000);
|
|
cxl_p2n_write(afu, CXL_AURP1_An, 0x0000000000000000);
|
|
cxl_p2n_write(afu, CXL_AURP0_An, 0x0000000000000000);
|
|
cxl_p2n_write(afu, CXL_SSTP1_An, 0x0000000000000000);
|
|
cxl_p2n_write(afu, CXL_SSTP0_An, 0x0000000000000000);
|
|
reg = cxl_p2n_read(afu, CXL_PSL_DSISR_An);
|
|
if (reg) {
|
|
dev_warn(&afu->dev, "AFU had pending DSISR: %#.16llx\n", reg);
|
|
if (reg & CXL_PSL_DSISR_TRANS)
|
|
cxl_p2n_write(afu, CXL_PSL_TFC_An, CXL_PSL_TFC_An_AE);
|
|
else
|
|
cxl_p2n_write(afu, CXL_PSL_TFC_An, CXL_PSL_TFC_An_A);
|
|
}
|
|
reg = cxl_p1n_read(afu, CXL_PSL_SERR_An);
|
|
if (reg) {
|
|
if (reg & ~0xffff)
|
|
dev_warn(&afu->dev, "AFU had pending SERR: %#.16llx\n", reg);
|
|
cxl_p1n_write(afu, CXL_PSL_SERR_An, reg & ~0xffff);
|
|
}
|
|
reg = cxl_p2n_read(afu, CXL_PSL_ErrStat_An);
|
|
if (reg) {
|
|
dev_warn(&afu->dev, "AFU had pending error status: %#.16llx\n", reg);
|
|
cxl_p2n_write(afu, CXL_PSL_ErrStat_An, reg);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cxl_init_afu(struct cxl *adapter, int slice, struct pci_dev *dev)
|
|
{
|
|
struct cxl_afu *afu;
|
|
bool free = true;
|
|
int rc;
|
|
|
|
if (!(afu = cxl_alloc_afu(adapter, slice)))
|
|
return -ENOMEM;
|
|
|
|
if ((rc = dev_set_name(&afu->dev, "afu%i.%i", adapter->adapter_num, slice)))
|
|
goto err1;
|
|
|
|
if ((rc = cxl_map_slice_regs(afu, adapter, dev)))
|
|
goto err1;
|
|
|
|
if ((rc = sanitise_afu_regs(afu)))
|
|
goto err2;
|
|
|
|
/* We need to reset the AFU before we can read the AFU descriptor */
|
|
if ((rc = cxl_afu_reset(afu)))
|
|
goto err2;
|
|
|
|
if (cxl_verbose)
|
|
dump_afu_descriptor(afu);
|
|
|
|
if ((rc = cxl_read_afu_descriptor(afu)))
|
|
goto err2;
|
|
|
|
if ((rc = cxl_afu_descriptor_looks_ok(afu)))
|
|
goto err2;
|
|
|
|
if ((rc = init_implementation_afu_regs(afu)))
|
|
goto err2;
|
|
|
|
if ((rc = cxl_register_serr_irq(afu)))
|
|
goto err2;
|
|
|
|
if ((rc = cxl_register_psl_irq(afu)))
|
|
goto err3;
|
|
|
|
/* Don't care if this fails */
|
|
cxl_debugfs_afu_add(afu);
|
|
|
|
/*
|
|
* After we call this function we must not free the afu directly, even
|
|
* if it returns an error!
|
|
*/
|
|
if ((rc = cxl_register_afu(afu)))
|
|
goto err_put1;
|
|
|
|
if ((rc = cxl_sysfs_afu_add(afu)))
|
|
goto err_put1;
|
|
|
|
|
|
if ((rc = cxl_afu_select_best_mode(afu)))
|
|
goto err_put2;
|
|
|
|
adapter->afu[afu->slice] = afu;
|
|
|
|
return 0;
|
|
|
|
err_put2:
|
|
cxl_sysfs_afu_remove(afu);
|
|
err_put1:
|
|
device_unregister(&afu->dev);
|
|
free = false;
|
|
cxl_debugfs_afu_remove(afu);
|
|
cxl_release_psl_irq(afu);
|
|
err3:
|
|
cxl_release_serr_irq(afu);
|
|
err2:
|
|
cxl_unmap_slice_regs(afu);
|
|
err1:
|
|
if (free)
|
|
kfree(afu);
|
|
return rc;
|
|
}
|
|
|
|
static void cxl_remove_afu(struct cxl_afu *afu)
|
|
{
|
|
pr_devel("cxl_remove_afu\n");
|
|
|
|
if (!afu)
|
|
return;
|
|
|
|
cxl_sysfs_afu_remove(afu);
|
|
cxl_debugfs_afu_remove(afu);
|
|
|
|
spin_lock(&afu->adapter->afu_list_lock);
|
|
afu->adapter->afu[afu->slice] = NULL;
|
|
spin_unlock(&afu->adapter->afu_list_lock);
|
|
|
|
cxl_context_detach_all(afu);
|
|
cxl_afu_deactivate_mode(afu);
|
|
|
|
cxl_release_psl_irq(afu);
|
|
cxl_release_serr_irq(afu);
|
|
cxl_unmap_slice_regs(afu);
|
|
|
|
device_unregister(&afu->dev);
|
|
}
|
|
|
|
int cxl_reset(struct cxl *adapter)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(adapter->dev.parent);
|
|
int rc;
|
|
int i;
|
|
u32 val;
|
|
|
|
dev_info(&dev->dev, "CXL reset\n");
|
|
|
|
for (i = 0; i < adapter->slices; i++)
|
|
cxl_remove_afu(adapter->afu[i]);
|
|
|
|
/* pcie_warm_reset requests a fundamental pci reset which includes a
|
|
* PERST assert/deassert. PERST triggers a loading of the image
|
|
* if "user" or "factory" is selected in sysfs */
|
|
if ((rc = pci_set_pcie_reset_state(dev, pcie_warm_reset))) {
|
|
dev_err(&dev->dev, "cxl: pcie_warm_reset failed\n");
|
|
return rc;
|
|
}
|
|
|
|
/* the PERST done above fences the PHB. So, reset depends on EEH
|
|
* to unbind the driver, tell Sapphire to reinit the PHB, and rebind
|
|
* the driver. Do an mmio read explictly to ensure EEH notices the
|
|
* fenced PHB. Retry for a few seconds before giving up. */
|
|
i = 0;
|
|
while (((val = mmio_read32be(adapter->p1_mmio)) != 0xffffffff) &&
|
|
(i < 5)) {
|
|
msleep(500);
|
|
i++;
|
|
}
|
|
|
|
if (val != 0xffffffff)
|
|
dev_err(&dev->dev, "cxl: PERST failed to trigger EEH\n");
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int cxl_map_adapter_regs(struct cxl *adapter, struct pci_dev *dev)
|
|
{
|
|
if (pci_request_region(dev, 2, "priv 2 regs"))
|
|
goto err1;
|
|
if (pci_request_region(dev, 0, "priv 1 regs"))
|
|
goto err2;
|
|
|
|
pr_devel("cxl_map_adapter_regs: p1: %#.16llx %#llx, p2: %#.16llx %#llx",
|
|
p1_base(dev), p1_size(dev), p2_base(dev), p2_size(dev));
|
|
|
|
if (!(adapter->p1_mmio = ioremap(p1_base(dev), p1_size(dev))))
|
|
goto err3;
|
|
|
|
if (!(adapter->p2_mmio = ioremap(p2_base(dev), p2_size(dev))))
|
|
goto err4;
|
|
|
|
return 0;
|
|
|
|
err4:
|
|
iounmap(adapter->p1_mmio);
|
|
adapter->p1_mmio = NULL;
|
|
err3:
|
|
pci_release_region(dev, 0);
|
|
err2:
|
|
pci_release_region(dev, 2);
|
|
err1:
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void cxl_unmap_adapter_regs(struct cxl *adapter)
|
|
{
|
|
if (adapter->p1_mmio)
|
|
iounmap(adapter->p1_mmio);
|
|
if (adapter->p2_mmio)
|
|
iounmap(adapter->p2_mmio);
|
|
}
|
|
|
|
static int cxl_read_vsec(struct cxl *adapter, struct pci_dev *dev)
|
|
{
|
|
int vsec;
|
|
u32 afu_desc_off, afu_desc_size;
|
|
u32 ps_off, ps_size;
|
|
u16 vseclen;
|
|
u8 image_state;
|
|
|
|
if (!(vsec = find_cxl_vsec(dev))) {
|
|
dev_err(&adapter->dev, "ABORTING: CXL VSEC not found!\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
CXL_READ_VSEC_LENGTH(dev, vsec, &vseclen);
|
|
if (vseclen < CXL_VSEC_MIN_SIZE) {
|
|
pr_err("ABORTING: CXL VSEC too short\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
CXL_READ_VSEC_STATUS(dev, vsec, &adapter->vsec_status);
|
|
CXL_READ_VSEC_PSL_REVISION(dev, vsec, &adapter->psl_rev);
|
|
CXL_READ_VSEC_CAIA_MAJOR(dev, vsec, &adapter->caia_major);
|
|
CXL_READ_VSEC_CAIA_MINOR(dev, vsec, &adapter->caia_minor);
|
|
CXL_READ_VSEC_BASE_IMAGE(dev, vsec, &adapter->base_image);
|
|
CXL_READ_VSEC_IMAGE_STATE(dev, vsec, &image_state);
|
|
adapter->user_image_loaded = !!(image_state & CXL_VSEC_USER_IMAGE_LOADED);
|
|
adapter->perst_loads_image = true;
|
|
adapter->perst_select_user = !!(image_state & CXL_VSEC_USER_IMAGE_LOADED);
|
|
|
|
CXL_READ_VSEC_NAFUS(dev, vsec, &adapter->slices);
|
|
CXL_READ_VSEC_AFU_DESC_OFF(dev, vsec, &afu_desc_off);
|
|
CXL_READ_VSEC_AFU_DESC_SIZE(dev, vsec, &afu_desc_size);
|
|
CXL_READ_VSEC_PS_OFF(dev, vsec, &ps_off);
|
|
CXL_READ_VSEC_PS_SIZE(dev, vsec, &ps_size);
|
|
|
|
/* Convert everything to bytes, because there is NO WAY I'd look at the
|
|
* code a month later and forget what units these are in ;-) */
|
|
adapter->ps_off = ps_off * 64 * 1024;
|
|
adapter->ps_size = ps_size * 64 * 1024;
|
|
adapter->afu_desc_off = afu_desc_off * 64 * 1024;
|
|
adapter->afu_desc_size = afu_desc_size *64 * 1024;
|
|
|
|
/* Total IRQs - 1 PSL ERROR - #AFU*(1 slice error + 1 DSI) */
|
|
adapter->user_irqs = pnv_cxl_get_irq_count(dev) - 1 - 2*adapter->slices;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cxl_vsec_looks_ok(struct cxl *adapter, struct pci_dev *dev)
|
|
{
|
|
if (adapter->vsec_status & CXL_STATUS_SECOND_PORT)
|
|
return -EBUSY;
|
|
|
|
if (adapter->vsec_status & CXL_UNSUPPORTED_FEATURES) {
|
|
dev_err(&adapter->dev, "ABORTING: CXL requires unsupported features\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!adapter->slices) {
|
|
/* Once we support dynamic reprogramming we can use the card if
|
|
* it supports loadable AFUs */
|
|
dev_err(&adapter->dev, "ABORTING: Device has no AFUs\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!adapter->afu_desc_off || !adapter->afu_desc_size) {
|
|
dev_err(&adapter->dev, "ABORTING: VSEC shows no AFU descriptors\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (adapter->ps_size > p2_size(dev) - adapter->ps_off) {
|
|
dev_err(&adapter->dev, "ABORTING: Problem state size larger than "
|
|
"available in BAR2: 0x%llx > 0x%llx\n",
|
|
adapter->ps_size, p2_size(dev) - adapter->ps_off);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cxl_release_adapter(struct device *dev)
|
|
{
|
|
struct cxl *adapter = to_cxl_adapter(dev);
|
|
|
|
pr_devel("cxl_release_adapter\n");
|
|
|
|
kfree(adapter);
|
|
}
|
|
|
|
static struct cxl *cxl_alloc_adapter(struct pci_dev *dev)
|
|
{
|
|
struct cxl *adapter;
|
|
|
|
if (!(adapter = kzalloc(sizeof(struct cxl), GFP_KERNEL)))
|
|
return NULL;
|
|
|
|
adapter->dev.parent = &dev->dev;
|
|
adapter->dev.release = cxl_release_adapter;
|
|
pci_set_drvdata(dev, adapter);
|
|
spin_lock_init(&adapter->afu_list_lock);
|
|
|
|
return adapter;
|
|
}
|
|
|
|
static int sanitise_adapter_regs(struct cxl *adapter)
|
|
{
|
|
cxl_p1_write(adapter, CXL_PSL_ErrIVTE, 0x0000000000000000);
|
|
return cxl_tlb_slb_invalidate(adapter);
|
|
}
|
|
|
|
static struct cxl *cxl_init_adapter(struct pci_dev *dev)
|
|
{
|
|
struct cxl *adapter;
|
|
bool free = true;
|
|
int rc;
|
|
|
|
|
|
if (!(adapter = cxl_alloc_adapter(dev)))
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
if ((rc = switch_card_to_cxl(dev)))
|
|
goto err1;
|
|
|
|
if ((rc = cxl_alloc_adapter_nr(adapter)))
|
|
goto err1;
|
|
|
|
if ((rc = dev_set_name(&adapter->dev, "card%i", adapter->adapter_num)))
|
|
goto err2;
|
|
|
|
if ((rc = cxl_read_vsec(adapter, dev)))
|
|
goto err2;
|
|
|
|
if ((rc = cxl_vsec_looks_ok(adapter, dev)))
|
|
goto err2;
|
|
|
|
if ((rc = cxl_update_image_control(adapter)))
|
|
goto err2;
|
|
|
|
if ((rc = cxl_map_adapter_regs(adapter, dev)))
|
|
goto err2;
|
|
|
|
if ((rc = sanitise_adapter_regs(adapter)))
|
|
goto err2;
|
|
|
|
if ((rc = init_implementation_adapter_regs(adapter, dev)))
|
|
goto err3;
|
|
|
|
if ((rc = pnv_phb_to_cxl_mode(dev, OPAL_PHB_CAPI_MODE_CAPI)))
|
|
goto err3;
|
|
|
|
/* If recovery happened, the last step is to turn on snooping.
|
|
* In the non-recovery case this has no effect */
|
|
if ((rc = pnv_phb_to_cxl_mode(dev, OPAL_PHB_CAPI_MODE_SNOOP_ON))) {
|
|
goto err3;
|
|
}
|
|
|
|
if ((rc = cxl_register_psl_err_irq(adapter)))
|
|
goto err3;
|
|
|
|
/* Don't care if this one fails: */
|
|
cxl_debugfs_adapter_add(adapter);
|
|
|
|
/*
|
|
* After we call this function we must not free the adapter directly,
|
|
* even if it returns an error!
|
|
*/
|
|
if ((rc = cxl_register_adapter(adapter)))
|
|
goto err_put1;
|
|
|
|
if ((rc = cxl_sysfs_adapter_add(adapter)))
|
|
goto err_put1;
|
|
|
|
return adapter;
|
|
|
|
err_put1:
|
|
device_unregister(&adapter->dev);
|
|
free = false;
|
|
cxl_debugfs_adapter_remove(adapter);
|
|
cxl_release_psl_err_irq(adapter);
|
|
err3:
|
|
cxl_unmap_adapter_regs(adapter);
|
|
err2:
|
|
cxl_remove_adapter_nr(adapter);
|
|
err1:
|
|
if (free)
|
|
kfree(adapter);
|
|
return ERR_PTR(rc);
|
|
}
|
|
|
|
static void cxl_remove_adapter(struct cxl *adapter)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(adapter->dev.parent);
|
|
|
|
pr_devel("cxl_release_adapter\n");
|
|
|
|
cxl_sysfs_adapter_remove(adapter);
|
|
cxl_debugfs_adapter_remove(adapter);
|
|
cxl_release_psl_err_irq(adapter);
|
|
cxl_unmap_adapter_regs(adapter);
|
|
cxl_remove_adapter_nr(adapter);
|
|
|
|
device_unregister(&adapter->dev);
|
|
|
|
pci_release_region(pdev, 0);
|
|
pci_release_region(pdev, 2);
|
|
pci_disable_device(pdev);
|
|
}
|
|
|
|
static int cxl_probe(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
struct cxl *adapter;
|
|
int slice;
|
|
int rc;
|
|
|
|
pci_dev_get(dev);
|
|
|
|
if (cxl_verbose)
|
|
dump_cxl_config_space(dev);
|
|
|
|
if ((rc = setup_cxl_bars(dev)))
|
|
return rc;
|
|
|
|
if ((rc = pci_enable_device(dev))) {
|
|
dev_err(&dev->dev, "pci_enable_device failed: %i\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
adapter = cxl_init_adapter(dev);
|
|
if (IS_ERR(adapter)) {
|
|
dev_err(&dev->dev, "cxl_init_adapter failed: %li\n", PTR_ERR(adapter));
|
|
return PTR_ERR(adapter);
|
|
}
|
|
|
|
for (slice = 0; slice < adapter->slices; slice++) {
|
|
if ((rc = cxl_init_afu(adapter, slice, dev)))
|
|
dev_err(&dev->dev, "AFU %i failed to initialise: %i\n", slice, rc);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cxl_remove(struct pci_dev *dev)
|
|
{
|
|
struct cxl *adapter = pci_get_drvdata(dev);
|
|
int afu;
|
|
|
|
dev_warn(&dev->dev, "pci remove\n");
|
|
|
|
/*
|
|
* Lock to prevent someone grabbing a ref through the adapter list as
|
|
* we are removing it
|
|
*/
|
|
for (afu = 0; afu < adapter->slices; afu++)
|
|
cxl_remove_afu(adapter->afu[afu]);
|
|
cxl_remove_adapter(adapter);
|
|
}
|
|
|
|
struct pci_driver cxl_pci_driver = {
|
|
.name = "cxl-pci",
|
|
.id_table = cxl_pci_tbl,
|
|
.probe = cxl_probe,
|
|
.remove = cxl_remove,
|
|
};
|