66 строки
2.4 KiB
Plaintext
66 строки
2.4 KiB
Plaintext
Device-Tree bindings for Samsung Exynos SoC display controller (DECON)
|
|
|
|
DECON (Display and Enhancement Controller) is the Display Controller for the
|
|
Exynos series of SoCs which transfers the image data from a video memory
|
|
buffer to an external LCD interface.
|
|
|
|
Required properties:
|
|
- compatible: value should be "samsung,exynos5433-decon";
|
|
- reg: physical base address and length of the DECON registers set.
|
|
- interrupts: should contain a list of all DECON IP block interrupts in the
|
|
order: VSYNC, LCD_SYSTEM. The interrupt specifier format
|
|
depends on the interrupt controller used.
|
|
- interrupt-names: should contain the interrupt names: "vsync", "lcd_sys"
|
|
in the same order as they were listed in the interrupts
|
|
property.
|
|
- clocks: must include clock specifiers corresponding to entries in the
|
|
clock-names property.
|
|
- clock-names: list of clock names sorted in the same order as the clocks
|
|
property. Must contain "aclk_decon", "aclk_smmu_decon0x",
|
|
"aclk_xiu_decon0x", "pclk_smmu_decon0x", clk_decon_vclk",
|
|
"sclk_decon_eclk"
|
|
- ports: contains a port which is connected to mic node. address-cells and
|
|
size-cells must 1 and 0, respectively.
|
|
- port: contains an endpoint node which is connected to the endpoint in the mic
|
|
node. The reg value muset be 0.
|
|
- i80-if-timings: specify whether the panel which is connected to decon uses
|
|
i80 lcd interface or mipi video interface. This node contains
|
|
no timing information as that of fimd does. Because there is
|
|
no register in decon to specify i80 interface timing value,
|
|
it is not needed, but make it remain to use same kind of node
|
|
in fimd and exynos7 decon.
|
|
|
|
Example:
|
|
SoC specific DT entry:
|
|
decon: decon@13800000 {
|
|
compatible = "samsung,exynos5433-decon";
|
|
reg = <0x13800000 0x2104>;
|
|
clocks = <&cmu_disp CLK_ACLK_DECON>, <&cmu_disp CLK_ACLK_SMMU_DECON0X>,
|
|
<&cmu_disp CLK_ACLK_XIU_DECON0X>,
|
|
<&cmu_disp CLK_PCLK_SMMU_DECON0X>,
|
|
<&cmu_disp CLK_SCLK_DECON_VCLK>,
|
|
<&cmu_disp CLK_SCLK_DECON_ECLK>;
|
|
clock-names = "aclk_decon", "aclk_smmu_decon0x", "aclk_xiu_decon0x",
|
|
"pclk_smmu_decon0x", "sclk_decon_vclk", "sclk_decon_eclk";
|
|
interrupt-names = "vsync", "lcd_sys";
|
|
interrupts = <0 202 0>, <0 203 0>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
decon_to_mic: endpoint {
|
|
remote-endpoint = <&mic_to_decon>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
Board specific DT entry:
|
|
&decon {
|
|
i80-if-timings {
|
|
};
|
|
};
|