WSL2-Linux-Kernel/drivers/hwspinlock/omap_hwspinlock.c

232 строки
5.8 KiB
C

/*
* OMAP hardware spinlock driver
*
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
*
* Contact: Simon Que <sque@ti.com>
* Hari Kanigeri <h-kanigeri2@ti.com>
* Ohad Ben-Cohen <ohad@wizery.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/bitops.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/hwspinlock.h>
#include <linux/platform_device.h>
#include "hwspinlock_internal.h"
/* Spinlock register offsets */
#define SYSSTATUS_OFFSET 0x0014
#define LOCK_BASE_OFFSET 0x0800
#define SPINLOCK_NUMLOCKS_BIT_OFFSET (24)
/* Possible values of SPINLOCK_LOCK_REG */
#define SPINLOCK_NOTTAKEN (0) /* free */
#define SPINLOCK_TAKEN (1) /* locked */
#define to_omap_hwspinlock(lock) \
container_of(lock, struct omap_hwspinlock, lock)
struct omap_hwspinlock {
struct hwspinlock lock;
void __iomem *addr;
};
struct omap_hwspinlock_state {
int num_locks; /* Total number of locks in system */
void __iomem *io_base; /* Mapped base address */
};
static int omap_hwspinlock_trylock(struct hwspinlock *lock)
{
struct omap_hwspinlock *omap_lock = to_omap_hwspinlock(lock);
/* attempt to acquire the lock by reading its value */
return (SPINLOCK_NOTTAKEN == readl(omap_lock->addr));
}
static void omap_hwspinlock_unlock(struct hwspinlock *lock)
{
struct omap_hwspinlock *omap_lock = to_omap_hwspinlock(lock);
/* release the lock by writing 0 to it */
writel(SPINLOCK_NOTTAKEN, omap_lock->addr);
}
/*
* relax the OMAP interconnect while spinning on it.
*
* The specs recommended that the retry delay time will be
* just over half of the time that a requester would be
* expected to hold the lock.
*
* The number below is taken from an hardware specs example,
* obviously it is somewhat arbitrary.
*/
static void omap_hwspinlock_relax(struct hwspinlock *lock)
{
ndelay(50);
}
static const struct hwspinlock_ops omap_hwspinlock_ops = {
.trylock = omap_hwspinlock_trylock,
.unlock = omap_hwspinlock_unlock,
.relax = omap_hwspinlock_relax,
};
static int __devinit omap_hwspinlock_probe(struct platform_device *pdev)
{
struct omap_hwspinlock *omap_lock;
struct omap_hwspinlock_state *state;
struct hwspinlock *lock;
struct resource *res;
void __iomem *io_base;
int i, ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
state = kzalloc(sizeof(*state), GFP_KERNEL);
if (!state)
return -ENOMEM;
io_base = ioremap(res->start, resource_size(res));
if (!io_base) {
ret = -ENOMEM;
goto free_state;
}
/* Determine number of locks */
i = readl(io_base + SYSSTATUS_OFFSET);
i >>= SPINLOCK_NUMLOCKS_BIT_OFFSET;
/* one of the four lsb's must be set, and nothing else */
if (hweight_long(i & 0xf) != 1 || i > 8) {
ret = -EINVAL;
goto iounmap_base;
}
state->num_locks = i * 32;
state->io_base = io_base;
platform_set_drvdata(pdev, state);
/*
* runtime PM will make sure the clock of this module is
* enabled iff at least one lock is requested
*/
pm_runtime_enable(&pdev->dev);
for (i = 0; i < state->num_locks; i++) {
omap_lock = kzalloc(sizeof(*omap_lock), GFP_KERNEL);
if (!omap_lock) {
ret = -ENOMEM;
goto free_locks;
}
omap_lock->lock.dev = &pdev->dev;
omap_lock->lock.owner = THIS_MODULE;
omap_lock->lock.id = i;
omap_lock->lock.ops = &omap_hwspinlock_ops;
omap_lock->addr = io_base + LOCK_BASE_OFFSET + sizeof(u32) * i;
ret = hwspin_lock_register(&omap_lock->lock);
if (ret) {
kfree(omap_lock);
goto free_locks;
}
}
return 0;
free_locks:
while (--i >= 0) {
lock = hwspin_lock_unregister(i);
/* this should't happen, but let's give our best effort */
if (!lock) {
dev_err(&pdev->dev, "%s: cleanups failed\n", __func__);
continue;
}
omap_lock = to_omap_hwspinlock(lock);
kfree(omap_lock);
}
pm_runtime_disable(&pdev->dev);
iounmap_base:
iounmap(io_base);
free_state:
kfree(state);
return ret;
}
static int omap_hwspinlock_remove(struct platform_device *pdev)
{
struct omap_hwspinlock_state *state = platform_get_drvdata(pdev);
struct hwspinlock *lock;
struct omap_hwspinlock *omap_lock;
int i;
for (i = 0; i < state->num_locks; i++) {
lock = hwspin_lock_unregister(i);
/* this shouldn't happen at this point. if it does, at least
* don't continue with the remove */
if (!lock) {
dev_err(&pdev->dev, "%s: failed on %d\n", __func__, i);
return -EBUSY;
}
omap_lock = to_omap_hwspinlock(lock);
kfree(omap_lock);
}
pm_runtime_disable(&pdev->dev);
iounmap(state->io_base);
kfree(state);
return 0;
}
static struct platform_driver omap_hwspinlock_driver = {
.probe = omap_hwspinlock_probe,
.remove = omap_hwspinlock_remove,
.driver = {
.name = "omap_hwspinlock",
},
};
static int __init omap_hwspinlock_init(void)
{
return platform_driver_register(&omap_hwspinlock_driver);
}
/* board init code might need to reserve hwspinlocks for predefined purposes */
postcore_initcall(omap_hwspinlock_init);
static void __exit omap_hwspinlock_exit(void)
{
platform_driver_unregister(&omap_hwspinlock_driver);
}
module_exit(omap_hwspinlock_exit);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Hardware spinlock driver for OMAP");
MODULE_AUTHOR("Simon Que <sque@ti.com>");
MODULE_AUTHOR("Hari Kanigeri <h-kanigeri2@ti.com>");
MODULE_AUTHOR("Ohad Ben-Cohen <ohad@wizery.com>");