microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/hwmon/gl518sm.c

724 строки
23 KiB
C
Исходник Ответственный История

/*
* gl518sm.c - Part of lm_sensors, Linux kernel modules for hardware
* monitoring
* Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and
* Kyosti Malkki <kmalkki@cc.hut.fi>
* Copyright (C) 2004 Hong-Gunn Chew <hglinux@gunnet.org> and
* Jean Delvare <khali@linux-fr.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Ported to Linux 2.6 by Hong-Gunn Chew with the help of Jean Delvare
* and advice of Greg Kroah-Hartman.
*
* Notes about the port:
* Release 0x00 of the GL518SM chipset doesn't support reading of in0,
* in1 nor in2. The original driver had an ugly workaround to get them
* anyway (changing limits and watching alarms trigger and wear off).
* We did not keep that part of the original driver in the Linux 2.6
* version, since it was making the driver significantly more complex
* with no real benefit.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
enum chips { gl518sm_r00, gl518sm_r80 };
/* Many GL518 constants specified below */
/* The GL518 registers */
#define GL518_REG_CHIP_ID 0x00
#define GL518_REG_REVISION 0x01
#define GL518_REG_VENDOR_ID 0x02
#define GL518_REG_CONF 0x03
#define GL518_REG_TEMP_IN 0x04
#define GL518_REG_TEMP_MAX 0x05
#define GL518_REG_TEMP_HYST 0x06
#define GL518_REG_FAN_COUNT 0x07
#define GL518_REG_FAN_LIMIT 0x08
#define GL518_REG_VIN1_LIMIT 0x09
#define GL518_REG_VIN2_LIMIT 0x0a
#define GL518_REG_VIN3_LIMIT 0x0b
#define GL518_REG_VDD_LIMIT 0x0c
#define GL518_REG_VIN3 0x0d
#define GL518_REG_MISC 0x0f
#define GL518_REG_ALARM 0x10
#define GL518_REG_MASK 0x11
#define GL518_REG_INT 0x12
#define GL518_REG_VIN2 0x13
#define GL518_REG_VIN1 0x14
#define GL518_REG_VDD 0x15
/*
* Conversions. Rounding and limit checking is only done on the TO_REG
* variants. Note that you should be a bit careful with which arguments
* these macros are called: arguments may be evaluated more than once.
* Fixing this is just not worth it.
*/
#define RAW_FROM_REG(val) val
#define BOOL_FROM_REG(val) ((val) ? 0 : 1)
#define BOOL_TO_REG(val) ((val) ? 0 : 1)
#define TEMP_TO_REG(val) SENSORS_LIMIT(((((val) < 0 ? \
(val) - 500 : \
(val) + 500) / 1000) + 119), 0, 255)
#define TEMP_FROM_REG(val) (((val) - 119) * 1000)
static inline u8 FAN_TO_REG(long rpm, int div)
{
long rpmdiv;
if (rpm == 0)
return 0;
rpmdiv = SENSORS_LIMIT(rpm, 1, 960000) * div;
return SENSORS_LIMIT((480000 + rpmdiv / 2) / rpmdiv, 1, 255);
}
#define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : (480000 / ((val) * (div))))
#define IN_TO_REG(val) SENSORS_LIMIT((((val) + 9) / 19), 0, 255)
#define IN_FROM_REG(val) ((val) * 19)
#define VDD_TO_REG(val) SENSORS_LIMIT((((val) * 4 + 47) / 95), 0, 255)
#define VDD_FROM_REG(val) (((val) * 95 + 2) / 4)
#define DIV_FROM_REG(val) (1 << (val))
#define BEEP_MASK_TO_REG(val) ((val) & 0x7f & data->alarm_mask)
#define BEEP_MASK_FROM_REG(val) ((val) & 0x7f)
/* Each client has this additional data */
struct gl518_data {
struct device *hwmon_dev;
enum chips type;
struct mutex update_lock;
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
u8 voltage_in[4]; /* Register values; [0] = VDD */
u8 voltage_min[4]; /* Register values; [0] = VDD */
u8 voltage_max[4]; /* Register values; [0] = VDD */
u8 fan_in[2];
u8 fan_min[2];
u8 fan_div[2]; /* Register encoding, shifted right */
u8 fan_auto1; /* Boolean */
u8 temp_in; /* Register values */
u8 temp_max; /* Register values */
u8 temp_hyst; /* Register values */
u8 alarms; /* Register value */
u8 alarm_mask;
u8 beep_mask; /* Register value */
u8 beep_enable; /* Boolean */
};
static int gl518_probe(struct i2c_client *client,
const struct i2c_device_id *id);
static int gl518_detect(struct i2c_client *client, struct i2c_board_info *info);
static void gl518_init_client(struct i2c_client *client);
static int gl518_remove(struct i2c_client *client);
static int gl518_read_value(struct i2c_client *client, u8 reg);
static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value);
static struct gl518_data *gl518_update_device(struct device *dev);
static const struct i2c_device_id gl518_id[] = {
{ "gl518sm", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, gl518_id);
/* This is the driver that will be inserted */
static struct i2c_driver gl518_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = "gl518sm",
},
.probe = gl518_probe,
.remove = gl518_remove,
.id_table = gl518_id,
.detect = gl518_detect,
.address_list = normal_i2c,
};
/*
* Sysfs stuff
*/
#define show(type, suffix, value) \
static ssize_t show_##suffix(struct device *dev, \
struct device_attribute *attr, char *buf) \
{ \
struct gl518_data *data = gl518_update_device(dev); \
return sprintf(buf, "%d\n", type##_FROM_REG(data->value)); \
}
show(TEMP, temp_input1, temp_in);
show(TEMP, temp_max1, temp_max);
show(TEMP, temp_hyst1, temp_hyst);
show(BOOL, fan_auto1, fan_auto1);
show(VDD, in_input0, voltage_in[0]);
show(IN, in_input1, voltage_in[1]);
show(IN, in_input2, voltage_in[2]);
show(IN, in_input3, voltage_in[3]);
show(VDD, in_min0, voltage_min[0]);
show(IN, in_min1, voltage_min[1]);
show(IN, in_min2, voltage_min[2]);
show(IN, in_min3, voltage_min[3]);
show(VDD, in_max0, voltage_max[0]);
show(IN, in_max1, voltage_max[1]);
show(IN, in_max2, voltage_max[2]);
show(IN, in_max3, voltage_max[3]);
show(RAW, alarms, alarms);
show(BOOL, beep_enable, beep_enable);
show(BEEP_MASK, beep_mask, beep_mask);
static ssize_t show_fan_input(struct device *dev,
struct device_attribute *attr, char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct gl518_data *data = gl518_update_device(dev);
return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_in[nr],
DIV_FROM_REG(data->fan_div[nr])));
}
static ssize_t show_fan_min(struct device *dev,
struct device_attribute *attr, char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct gl518_data *data = gl518_update_device(dev);
return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr],
DIV_FROM_REG(data->fan_div[nr])));
}
static ssize_t show_fan_div(struct device *dev,
struct device_attribute *attr, char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct gl518_data *data = gl518_update_device(dev);
return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
}
#define set(type, suffix, value, reg) \
static ssize_t set_##suffix(struct device *dev, \
struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct gl518_data *data = i2c_get_clientdata(client); \
long val; \
int err = kstrtol(buf, 10, &val); \
if (err) \
return err; \
\
mutex_lock(&data->update_lock); \
data->value = type##_TO_REG(val); \
gl518_write_value(client, reg, data->value); \
mutex_unlock(&data->update_lock); \
return count; \
}
#define set_bits(type, suffix, value, reg, mask, shift) \
static ssize_t set_##suffix(struct device *dev, \
struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
struct i2c_client *client = to_i2c_client(dev); \
struct gl518_data *data = i2c_get_clientdata(client); \
int regvalue; \
unsigned long val; \
int err = kstrtoul(buf, 10, &val); \
if (err) \
return err; \
\
mutex_lock(&data->update_lock); \
regvalue = gl518_read_value(client, reg); \
data->value = type##_TO_REG(val); \
regvalue = (regvalue & ~mask) | (data->value << shift); \
gl518_write_value(client, reg, regvalue); \
mutex_unlock(&data->update_lock); \
return count; \
}
#define set_low(type, suffix, value, reg) \
set_bits(type, suffix, value, reg, 0x00ff, 0)
#define set_high(type, suffix, value, reg) \
set_bits(type, suffix, value, reg, 0xff00, 8)
set(TEMP, temp_max1, temp_max, GL518_REG_TEMP_MAX);
set(TEMP, temp_hyst1, temp_hyst, GL518_REG_TEMP_HYST);
set_bits(BOOL, fan_auto1, fan_auto1, GL518_REG_MISC, 0x08, 3);
set_low(VDD, in_min0, voltage_min[0], GL518_REG_VDD_LIMIT);
set_low(IN, in_min1, voltage_min[1], GL518_REG_VIN1_LIMIT);
set_low(IN, in_min2, voltage_min[2], GL518_REG_VIN2_LIMIT);
set_low(IN, in_min3, voltage_min[3], GL518_REG_VIN3_LIMIT);
set_high(VDD, in_max0, voltage_max[0], GL518_REG_VDD_LIMIT);
set_high(IN, in_max1, voltage_max[1], GL518_REG_VIN1_LIMIT);
set_high(IN, in_max2, voltage_max[2], GL518_REG_VIN2_LIMIT);
set_high(IN, in_max3, voltage_max[3], GL518_REG_VIN3_LIMIT);
set_bits(BOOL, beep_enable, beep_enable, GL518_REG_CONF, 0x04, 2);
set(BEEP_MASK, beep_mask, beep_mask, GL518_REG_ALARM);
static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct gl518_data *data = i2c_get_clientdata(client);
int nr = to_sensor_dev_attr(attr)->index;
int regvalue;
unsigned long val;
int err;
err = kstrtoul(buf, 10, &val);
if (err)
return err;
mutex_lock(&data->update_lock);
regvalue = gl518_read_value(client, GL518_REG_FAN_LIMIT);
data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr]));
regvalue = (regvalue & (0xff << (8 * nr)))
| (data->fan_min[nr] << (8 * (1 - nr)));
gl518_write_value(client, GL518_REG_FAN_LIMIT, regvalue);
data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
if (data->fan_min[nr] == 0)
data->alarm_mask &= ~(0x20 << nr);
else
data->alarm_mask |= (0x20 << nr);
data->beep_mask &= data->alarm_mask;
gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct gl518_data *data = i2c_get_clientdata(client);
int nr = to_sensor_dev_attr(attr)->index;
int regvalue;
unsigned long val;
int err;
err = kstrtoul(buf, 10, &val);
if (err)
return err;
switch (val) {
case 1:
val = 0;
break;
case 2:
val = 1;
break;
case 4:
val = 2;
break;
case 8:
val = 3;
break;
default:
dev_err(dev, "Invalid fan clock divider %lu, choose one "
"of 1, 2, 4 or 8\n", val);
return -EINVAL;
}
mutex_lock(&data->update_lock);
regvalue = gl518_read_value(client, GL518_REG_MISC);
data->fan_div[nr] = val;
regvalue = (regvalue & ~(0xc0 >> (2 * nr)))
| (data->fan_div[nr] << (6 - 2 * nr));
gl518_write_value(client, GL518_REG_MISC, regvalue);
mutex_unlock(&data->update_lock);
return count;
}
static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL);
static DEVICE_ATTR(temp1_max, S_IWUSR|S_IRUGO, show_temp_max1, set_temp_max1);
static DEVICE_ATTR(temp1_max_hyst, S_IWUSR|S_IRUGO,
show_temp_hyst1, set_temp_hyst1);
static DEVICE_ATTR(fan1_auto, S_IWUSR|S_IRUGO, show_fan_auto1, set_fan_auto1);
static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input, NULL, 0);
static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input, NULL, 1);
static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR|S_IRUGO,
show_fan_min, set_fan_min, 0);
static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR|S_IRUGO,
show_fan_min, set_fan_min, 1);
static SENSOR_DEVICE_ATTR(fan1_div, S_IWUSR|S_IRUGO,
show_fan_div, set_fan_div, 0);
static SENSOR_DEVICE_ATTR(fan2_div, S_IWUSR|S_IRUGO,
show_fan_div, set_fan_div, 1);
static DEVICE_ATTR(in0_input, S_IRUGO, show_in_input0, NULL);
static DEVICE_ATTR(in1_input, S_IRUGO, show_in_input1, NULL);
static DEVICE_ATTR(in2_input, S_IRUGO, show_in_input2, NULL);
static DEVICE_ATTR(in3_input, S_IRUGO, show_in_input3, NULL);
static DEVICE_ATTR(in0_min, S_IWUSR|S_IRUGO, show_in_min0, set_in_min0);
static DEVICE_ATTR(in1_min, S_IWUSR|S_IRUGO, show_in_min1, set_in_min1);
static DEVICE_ATTR(in2_min, S_IWUSR|S_IRUGO, show_in_min2, set_in_min2);
static DEVICE_ATTR(in3_min, S_IWUSR|S_IRUGO, show_in_min3, set_in_min3);
static DEVICE_ATTR(in0_max, S_IWUSR|S_IRUGO, show_in_max0, set_in_max0);
static DEVICE_ATTR(in1_max, S_IWUSR|S_IRUGO, show_in_max1, set_in_max1);
static DEVICE_ATTR(in2_max, S_IWUSR|S_IRUGO, show_in_max2, set_in_max2);
static DEVICE_ATTR(in3_max, S_IWUSR|S_IRUGO, show_in_max3, set_in_max3);
static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL);
static DEVICE_ATTR(beep_enable, S_IWUSR|S_IRUGO,
show_beep_enable, set_beep_enable);
static DEVICE_ATTR(beep_mask, S_IWUSR|S_IRUGO,
show_beep_mask, set_beep_mask);
static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
char *buf)
{
int bitnr = to_sensor_dev_attr(attr)->index;
struct gl518_data *data = gl518_update_device(dev);
return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
}
static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4);
static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 5);
static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 6);
static ssize_t show_beep(struct device *dev, struct device_attribute *attr,
char *buf)
{
int bitnr = to_sensor_dev_attr(attr)->index;
struct gl518_data *data = gl518_update_device(dev);
return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1);
}
static ssize_t set_beep(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct gl518_data *data = i2c_get_clientdata(client);
int bitnr = to_sensor_dev_attr(attr)->index;
unsigned long bit;
int err;
err = kstrtoul(buf, 10, &bit);
if (err)
return err;
if (bit & ~1)
return -EINVAL;
mutex_lock(&data->update_lock);
data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
if (bit)
data->beep_mask |= (1 << bitnr);
else
data->beep_mask &= ~(1 << bitnr);
gl518_write_value(client, GL518_REG_ALARM, data->beep_mask);
mutex_unlock(&data->update_lock);
return count;
}
static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO|S_IWUSR, show_beep, set_beep, 0);
static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO|S_IWUSR, show_beep, set_beep, 1);
static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO|S_IWUSR, show_beep, set_beep, 2);
static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO|S_IWUSR, show_beep, set_beep, 3);
static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO|S_IWUSR, show_beep, set_beep, 4);
static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO|S_IWUSR, show_beep, set_beep, 5);
static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO|S_IWUSR, show_beep, set_beep, 6);
static struct attribute *gl518_attributes[] = {
&dev_attr_in3_input.attr,
&dev_attr_in0_min.attr,
&dev_attr_in1_min.attr,
&dev_attr_in2_min.attr,
&dev_attr_in3_min.attr,
&dev_attr_in0_max.attr,
&dev_attr_in1_max.attr,
&dev_attr_in2_max.attr,
&dev_attr_in3_max.attr,
&sensor_dev_attr_in0_alarm.dev_attr.attr,
&sensor_dev_attr_in1_alarm.dev_attr.attr,
&sensor_dev_attr_in2_alarm.dev_attr.attr,
&sensor_dev_attr_in3_alarm.dev_attr.attr,
&sensor_dev_attr_in0_beep.dev_attr.attr,
&sensor_dev_attr_in1_beep.dev_attr.attr,
&sensor_dev_attr_in2_beep.dev_attr.attr,
&sensor_dev_attr_in3_beep.dev_attr.attr,
&dev_attr_fan1_auto.attr,
&sensor_dev_attr_fan1_input.dev_attr.attr,
&sensor_dev_attr_fan2_input.dev_attr.attr,
&sensor_dev_attr_fan1_min.dev_attr.attr,
&sensor_dev_attr_fan2_min.dev_attr.attr,
&sensor_dev_attr_fan1_div.dev_attr.attr,
&sensor_dev_attr_fan2_div.dev_attr.attr,
&sensor_dev_attr_fan1_alarm.dev_attr.attr,
&sensor_dev_attr_fan2_alarm.dev_attr.attr,
&sensor_dev_attr_fan1_beep.dev_attr.attr,
&sensor_dev_attr_fan2_beep.dev_attr.attr,
&dev_attr_temp1_input.attr,
&dev_attr_temp1_max.attr,
&dev_attr_temp1_max_hyst.attr,
&sensor_dev_attr_temp1_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_beep.dev_attr.attr,
&dev_attr_alarms.attr,
&dev_attr_beep_enable.attr,
&dev_attr_beep_mask.attr,
NULL
};
static const struct attribute_group gl518_group = {
.attrs = gl518_attributes,
};
static struct attribute *gl518_attributes_r80[] = {
&dev_attr_in0_input.attr,
&dev_attr_in1_input.attr,
&dev_attr_in2_input.attr,
NULL
};
static const struct attribute_group gl518_group_r80 = {
.attrs = gl518_attributes_r80,
};
/*
* Real code
*/
/* Return 0 if detection is successful, -ENODEV otherwise */
static int gl518_detect(struct i2c_client *client, struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
int rev;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
I2C_FUNC_SMBUS_WORD_DATA))
return -ENODEV;
/* Now, we do the remaining detection. */
if ((gl518_read_value(client, GL518_REG_CHIP_ID) != 0x80)
|| (gl518_read_value(client, GL518_REG_CONF) & 0x80))
return -ENODEV;
/* Determine the chip type. */
rev = gl518_read_value(client, GL518_REG_REVISION);
if (rev != 0x00 && rev != 0x80)
return -ENODEV;
strlcpy(info->type, "gl518sm", I2C_NAME_SIZE);
return 0;
}
static int gl518_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct gl518_data *data;
int err, revision;
data = kzalloc(sizeof(struct gl518_data), GFP_KERNEL);
if (!data) {
err = -ENOMEM;
goto exit;
}
i2c_set_clientdata(client, data);
revision = gl518_read_value(client, GL518_REG_REVISION);
data->type = revision == 0x80 ? gl518sm_r80 : gl518sm_r00;
mutex_init(&data->update_lock);
/* Initialize the GL518SM chip */
data->alarm_mask = 0xff;
gl518_init_client(client);
/* Register sysfs hooks */
err = sysfs_create_group(&client->dev.kobj, &gl518_group);
if (err)
goto exit_free;
if (data->type == gl518sm_r80) {
err = sysfs_create_group(&client->dev.kobj, &gl518_group_r80);
if (err)
goto exit_remove_files;
}
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
}
return 0;
exit_remove_files:
sysfs_remove_group(&client->dev.kobj, &gl518_group);
if (data->type == gl518sm_r80)
sysfs_remove_group(&client->dev.kobj, &gl518_group_r80);
exit_free:
kfree(data);
exit:
return err;
}
/*
* Called when we have found a new GL518SM.
* Note that we preserve D4:NoFan2 and D2:beep_enable.
*/
static void gl518_init_client(struct i2c_client *client)
{
/* Make sure we leave D7:Reset untouched */
u8 regvalue = gl518_read_value(client, GL518_REG_CONF) & 0x7f;
/* Comparator mode (D3=0), standby mode (D6=0) */
gl518_write_value(client, GL518_REG_CONF, (regvalue &= 0x37));
/* Never interrupts */
gl518_write_value(client, GL518_REG_MASK, 0x00);
/* Clear status register (D5=1), start (D6=1) */
gl518_write_value(client, GL518_REG_CONF, 0x20 | regvalue);
gl518_write_value(client, GL518_REG_CONF, 0x40 | regvalue);
}
static int gl518_remove(struct i2c_client *client)
{
struct gl518_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &gl518_group);
if (data->type == gl518sm_r80)
sysfs_remove_group(&client->dev.kobj, &gl518_group_r80);
kfree(data);
return 0;
}
/*
* Registers 0x07 to 0x0c are word-sized, others are byte-sized
* GL518 uses a high-byte first convention, which is exactly opposite to
* the SMBus standard.
*/
static int gl518_read_value(struct i2c_client *client, u8 reg)
{
if ((reg >= 0x07) && (reg <= 0x0c))
return i2c_smbus_read_word_swapped(client, reg);
else
return i2c_smbus_read_byte_data(client, reg);
}
static int gl518_write_value(struct i2c_client *client, u8 reg, u16 value)
{
if ((reg >= 0x07) && (reg <= 0x0c))
return i2c_smbus_write_word_swapped(client, reg, value);
else
return i2c_smbus_write_byte_data(client, reg, value);
}
static struct gl518_data *gl518_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct gl518_data *data = i2c_get_clientdata(client);
int val;
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
|| !data->valid) {
dev_dbg(&client->dev, "Starting gl518 update\n");
data->alarms = gl518_read_value(client, GL518_REG_INT);
data->beep_mask = gl518_read_value(client, GL518_REG_ALARM);
val = gl518_read_value(client, GL518_REG_VDD_LIMIT);
data->voltage_min[0] = val & 0xff;
data->voltage_max[0] = (val >> 8) & 0xff;
val = gl518_read_value(client, GL518_REG_VIN1_LIMIT);
data->voltage_min[1] = val & 0xff;
data->voltage_max[1] = (val >> 8) & 0xff;
val = gl518_read_value(client, GL518_REG_VIN2_LIMIT);
data->voltage_min[2] = val & 0xff;
data->voltage_max[2] = (val >> 8) & 0xff;
val = gl518_read_value(client, GL518_REG_VIN3_LIMIT);
data->voltage_min[3] = val & 0xff;
data->voltage_max[3] = (val >> 8) & 0xff;
val = gl518_read_value(client, GL518_REG_FAN_COUNT);
data->fan_in[0] = (val >> 8) & 0xff;
data->fan_in[1] = val & 0xff;
val = gl518_read_value(client, GL518_REG_FAN_LIMIT);
data->fan_min[0] = (val >> 8) & 0xff;
data->fan_min[1] = val & 0xff;
data->temp_in = gl518_read_value(client, GL518_REG_TEMP_IN);
data->temp_max =
gl518_read_value(client, GL518_REG_TEMP_MAX);
data->temp_hyst =
gl518_read_value(client, GL518_REG_TEMP_HYST);
val = gl518_read_value(client, GL518_REG_MISC);
data->fan_div[0] = (val >> 6) & 0x03;
data->fan_div[1] = (val >> 4) & 0x03;
data->fan_auto1 = (val >> 3) & 0x01;
data->alarms &= data->alarm_mask;
val = gl518_read_value(client, GL518_REG_CONF);
data->beep_enable = (val >> 2) & 1;
if (data->type != gl518sm_r00) {
data->voltage_in[0] =
gl518_read_value(client, GL518_REG_VDD);
data->voltage_in[1] =
gl518_read_value(client, GL518_REG_VIN1);
data->voltage_in[2] =
gl518_read_value(client, GL518_REG_VIN2);
}
data->voltage_in[3] =
gl518_read_value(client, GL518_REG_VIN3);
data->last_updated = jiffies;
data->valid = 1;
}
mutex_unlock(&data->update_lock);
return data;
}
module_i2c_driver(gl518_driver);
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
"Kyosti Malkki <kmalkki@cc.hut.fi> and "
"Hong-Gunn Chew <hglinux@gunnet.org>");
MODULE_DESCRIPTION("GL518SM driver");
MODULE_LICENSE("GPL");
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку