WSL2-Linux-Kernel/arch/alpha/kernel/core_mcpcia.c

616 строки
16 KiB
C
Исходник Ответственный История

Этот файл содержит невидимые символы Юникода!

Этот файл содержит невидимые символы Юникода, которые могут быть отображены не так, как показано ниже. Если это намеренно, можете спокойно проигнорировать это предупреждение. Используйте кнопку Экранировать, чтобы показать скрытые символы.

/*
* linux/arch/alpha/kernel/core_mcpcia.c
*
* Based on code written by David A Rusling (david.rusling@reo.mts.dec.com).
*
* Code common to all MCbus-PCI Adaptor core logic chipsets
*/
#define __EXTERN_INLINE inline
#include <asm/io.h>
#include <asm/core_mcpcia.h>
#undef __EXTERN_INLINE
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <asm/ptrace.h>
#include "proto.h"
#include "pci_impl.h"
/*
* NOTE: Herein lie back-to-back mb instructions. They are magic.
* One plausible explanation is that the i/o controller does not properly
* handle the system transaction. Another involves timing. Ho hum.
*/
/*
* BIOS32-style PCI interface:
*/
#define DEBUG_CFG 0
#if DEBUG_CFG
# define DBG_CFG(args) printk args
#else
# define DBG_CFG(args)
#endif
/*
* Given a bus, device, and function number, compute resulting
* configuration space address and setup the MCPCIA_HAXR2 register
* accordingly. It is therefore not safe to have concurrent
* invocations to configuration space access routines, but there
* really shouldn't be any need for this.
*
* Type 0:
*
* 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
* 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* 31:11 Device select bit.
* 10:8 Function number
* 7:2 Register number
*
* Type 1:
*
* 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
* 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* 31:24 reserved
* 23:16 bus number (8 bits = 128 possible buses)
* 15:11 Device number (5 bits)
* 10:8 function number
* 7:2 register number
*
* Notes:
* The function number selects which function of a multi-function device
* (e.g., SCSI and Ethernet).
*
* The register selects a DWORD (32 bit) register offset. Hence it
* doesn't get shifted by 2 bits as we want to "drop" the bottom two
* bits.
*/
static unsigned int
conf_read(unsigned long addr, unsigned char type1,
struct pci_controller *hose)
{
unsigned long flags;
unsigned long mid = MCPCIA_HOSE2MID(hose->index);
unsigned int stat0, value, temp, cpu;
cpu = smp_processor_id();
local_irq_save(flags);
DBG_CFG(("conf_read(addr=0x%lx, type1=%d, hose=%d)\n",
addr, type1, mid));
/* Reset status register to avoid losing errors. */
stat0 = *(vuip)MCPCIA_CAP_ERR(mid);
*(vuip)MCPCIA_CAP_ERR(mid) = stat0;
mb();
temp = *(vuip)MCPCIA_CAP_ERR(mid);
DBG_CFG(("conf_read: MCPCIA_CAP_ERR(%d) was 0x%x\n", mid, stat0));
mb();
draina();
mcheck_expected(cpu) = 1;
mcheck_taken(cpu) = 0;
mcheck_extra(cpu) = mid;
mb();
/* Access configuration space. */
value = *((vuip)addr);
mb();
mb(); /* magic */
if (mcheck_taken(cpu)) {
mcheck_taken(cpu) = 0;
value = 0xffffffffU;
mb();
}
mcheck_expected(cpu) = 0;
mb();
DBG_CFG(("conf_read(): finished\n"));
local_irq_restore(flags);
return value;
}
static void
conf_write(unsigned long addr, unsigned int value, unsigned char type1,
struct pci_controller *hose)
{
unsigned long flags;
unsigned long mid = MCPCIA_HOSE2MID(hose->index);
unsigned int stat0, temp, cpu;
cpu = smp_processor_id();
local_irq_save(flags); /* avoid getting hit by machine check */
/* Reset status register to avoid losing errors. */
stat0 = *(vuip)MCPCIA_CAP_ERR(mid);
*(vuip)MCPCIA_CAP_ERR(mid) = stat0; mb();
temp = *(vuip)MCPCIA_CAP_ERR(mid);
DBG_CFG(("conf_write: MCPCIA CAP_ERR(%d) was 0x%x\n", mid, stat0));
draina();
mcheck_expected(cpu) = 1;
mcheck_extra(cpu) = mid;
mb();
/* Access configuration space. */
*((vuip)addr) = value;
mb();
mb(); /* magic */
temp = *(vuip)MCPCIA_CAP_ERR(mid); /* read to force the write */
mcheck_expected(cpu) = 0;
mb();
DBG_CFG(("conf_write(): finished\n"));
local_irq_restore(flags);
}
static int
mk_conf_addr(struct pci_bus *pbus, unsigned int devfn, int where,
struct pci_controller *hose, unsigned long *pci_addr,
unsigned char *type1)
{
u8 bus = pbus->number;
unsigned long addr;
DBG_CFG(("mk_conf_addr(bus=%d,devfn=0x%x,hose=%d,where=0x%x,"
" pci_addr=0x%p, type1=0x%p)\n",
bus, devfn, hose->index, where, pci_addr, type1));
/* Type 1 configuration cycle for *ALL* busses. */
*type1 = 1;
if (!pbus->parent) /* No parent means peer PCI bus. */
bus = 0;
addr = (bus << 16) | (devfn << 8) | (where);
addr <<= 5; /* swizzle for SPARSE */
addr |= hose->config_space_base;
*pci_addr = addr;
DBG_CFG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
return 0;
}
static int
mcpcia_read_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 *value)
{
struct pci_controller *hose = bus->sysdata;
unsigned long addr, w;
unsigned char type1;
if (mk_conf_addr(bus, devfn, where, hose, &addr, &type1))
return PCIBIOS_DEVICE_NOT_FOUND;
addr |= (size - 1) * 8;
w = conf_read(addr, type1, hose);
switch (size) {
case 1:
*value = __kernel_extbl(w, where & 3);
break;
case 2:
*value = __kernel_extwl(w, where & 3);
break;
case 4:
*value = w;
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int
mcpcia_write_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 value)
{
struct pci_controller *hose = bus->sysdata;
unsigned long addr;
unsigned char type1;
if (mk_conf_addr(bus, devfn, where, hose, &addr, &type1))
return PCIBIOS_DEVICE_NOT_FOUND;
addr |= (size - 1) * 8;
value = __kernel_insql(value, where & 3);
conf_write(addr, value, type1, hose);
return PCIBIOS_SUCCESSFUL;
}
struct pci_ops mcpcia_pci_ops =
{
.read = mcpcia_read_config,
.write = mcpcia_write_config,
};
void
mcpcia_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
{
wmb();
*(vuip)MCPCIA_SG_TBIA(MCPCIA_HOSE2MID(hose->index)) = 0;
mb();
}
static int __init
mcpcia_probe_hose(int h)
{
int cpu = smp_processor_id();
int mid = MCPCIA_HOSE2MID(h);
unsigned int pci_rev;
/* Gotta be REAL careful. If hose is absent, we get an mcheck. */
mb();
mb();
draina();
wrmces(7);
mcheck_expected(cpu) = 2; /* indicates probing */
mcheck_taken(cpu) = 0;
mcheck_extra(cpu) = mid;
mb();
/* Access the bus revision word. */
pci_rev = *(vuip)MCPCIA_REV(mid);
mb();
mb(); /* magic */
if (mcheck_taken(cpu)) {
mcheck_taken(cpu) = 0;
pci_rev = 0xffffffff;
mb();
}
mcheck_expected(cpu) = 0;
mb();
return (pci_rev >> 16) == PCI_CLASS_BRIDGE_HOST;
}
static void __init
mcpcia_new_hose(int h)
{
struct pci_controller *hose;
struct resource *io, *mem, *hae_mem;
int mid = MCPCIA_HOSE2MID(h);
hose = alloc_pci_controller();
if (h == 0)
pci_isa_hose = hose;
io = alloc_resource();
mem = alloc_resource();
hae_mem = alloc_resource();
hose->io_space = io;
hose->mem_space = hae_mem;
hose->sparse_mem_base = MCPCIA_SPARSE(mid) - IDENT_ADDR;
hose->dense_mem_base = MCPCIA_DENSE(mid) - IDENT_ADDR;
hose->sparse_io_base = MCPCIA_IO(mid) - IDENT_ADDR;
hose->dense_io_base = 0;
hose->config_space_base = MCPCIA_CONF(mid);
hose->index = h;
io->start = MCPCIA_IO(mid) - MCPCIA_IO_BIAS;
io->end = io->start + 0xffff;
io->name = pci_io_names[h];
io->flags = IORESOURCE_IO;
mem->start = MCPCIA_DENSE(mid) - MCPCIA_MEM_BIAS;
mem->end = mem->start + 0xffffffff;
mem->name = pci_mem_names[h];
mem->flags = IORESOURCE_MEM;
hae_mem->start = mem->start;
hae_mem->end = mem->start + MCPCIA_MEM_MASK;
hae_mem->name = pci_hae0_name;
hae_mem->flags = IORESOURCE_MEM;
if (request_resource(&ioport_resource, io) < 0)
printk(KERN_ERR "Failed to request IO on hose %d\n", h);
if (request_resource(&iomem_resource, mem) < 0)
printk(KERN_ERR "Failed to request MEM on hose %d\n", h);
if (request_resource(mem, hae_mem) < 0)
printk(KERN_ERR "Failed to request HAE_MEM on hose %d\n", h);
}
static void
mcpcia_pci_clr_err(int mid)
{
*(vuip)MCPCIA_CAP_ERR(mid);
*(vuip)MCPCIA_CAP_ERR(mid) = 0xffffffff; /* Clear them all. */
mb();
*(vuip)MCPCIA_CAP_ERR(mid); /* Re-read for force write. */
}
static void __init
mcpcia_startup_hose(struct pci_controller *hose)
{
int mid = MCPCIA_HOSE2MID(hose->index);
unsigned int tmp;
mcpcia_pci_clr_err(mid);
/*
* Set up error reporting.
*/
tmp = *(vuip)MCPCIA_CAP_ERR(mid);
tmp |= 0x0006; /* master/target abort */
*(vuip)MCPCIA_CAP_ERR(mid) = tmp;
mb();
tmp = *(vuip)MCPCIA_CAP_ERR(mid);
/*
* Set up the PCI->physical memory translation windows.
*
* Window 0 is scatter-gather 8MB at 8MB (for isa)
* Window 1 is scatter-gather (up to) 1GB at 1GB (for pci)
* Window 2 is direct access 2GB at 2GB
*/
hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 0);
hose->sg_pci = iommu_arena_new(hose, 0x40000000,
size_for_memory(0x40000000), 0);
__direct_map_base = 0x80000000;
__direct_map_size = 0x80000000;
*(vuip)MCPCIA_W0_BASE(mid) = hose->sg_isa->dma_base | 3;
*(vuip)MCPCIA_W0_MASK(mid) = (hose->sg_isa->size - 1) & 0xfff00000;
*(vuip)MCPCIA_T0_BASE(mid) = virt_to_phys(hose->sg_isa->ptes) >> 8;
*(vuip)MCPCIA_W1_BASE(mid) = hose->sg_pci->dma_base | 3;
*(vuip)MCPCIA_W1_MASK(mid) = (hose->sg_pci->size - 1) & 0xfff00000;
*(vuip)MCPCIA_T1_BASE(mid) = virt_to_phys(hose->sg_pci->ptes) >> 8;
*(vuip)MCPCIA_W2_BASE(mid) = __direct_map_base | 1;
*(vuip)MCPCIA_W2_MASK(mid) = (__direct_map_size - 1) & 0xfff00000;
*(vuip)MCPCIA_T2_BASE(mid) = 0;
*(vuip)MCPCIA_W3_BASE(mid) = 0x0;
mcpcia_pci_tbi(hose, 0, -1);
*(vuip)MCPCIA_HBASE(mid) = 0x0;
mb();
*(vuip)MCPCIA_HAE_MEM(mid) = 0U;
mb();
*(vuip)MCPCIA_HAE_MEM(mid); /* read it back. */
*(vuip)MCPCIA_HAE_IO(mid) = 0;
mb();
*(vuip)MCPCIA_HAE_IO(mid); /* read it back. */
}
void __init
mcpcia_init_arch(void)
{
/* With multiple PCI busses, we play with I/O as physical addrs. */
ioport_resource.end = ~0UL;
/* Allocate hose 0. That's the one that all the ISA junk hangs
off of, from which we'll be registering stuff here in a bit.
Other hose detection is done in mcpcia_init_hoses, which is
called from init_IRQ. */
mcpcia_new_hose(0);
}
/* This is called from init_IRQ, since we cannot take interrupts
before then. Which means we cannot do this in init_arch. */
void __init
mcpcia_init_hoses(void)
{
struct pci_controller *hose;
int hose_count;
int h;
/* First, find how many hoses we have. */
hose_count = 0;
for (h = 0; h < MCPCIA_MAX_HOSES; ++h) {
if (mcpcia_probe_hose(h)) {
if (h != 0)
mcpcia_new_hose(h);
hose_count++;
}
}
printk("mcpcia_init_hoses: found %d hoses\n", hose_count);
/* Now do init for each hose. */
for (hose = hose_head; hose; hose = hose->next)
mcpcia_startup_hose(hose);
}
static void
mcpcia_print_uncorrectable(struct el_MCPCIA_uncorrected_frame_mcheck *logout)
{
struct el_common_EV5_uncorrectable_mcheck *frame;
int i;
frame = &logout->procdata;
/* Print PAL fields */
for (i = 0; i < 24; i += 2) {
printk(" paltmp[%d-%d] = %16lx %16lx\n",
i, i+1, frame->paltemp[i], frame->paltemp[i+1]);
}
for (i = 0; i < 8; i += 2) {
printk(" shadow[%d-%d] = %16lx %16lx\n",
i, i+1, frame->shadow[i],
frame->shadow[i+1]);
}
printk(" Addr of excepting instruction = %16lx\n",
frame->exc_addr);
printk(" Summary of arithmetic traps = %16lx\n",
frame->exc_sum);
printk(" Exception mask = %16lx\n",
frame->exc_mask);
printk(" Base address for PALcode = %16lx\n",
frame->pal_base);
printk(" Interrupt Status Reg = %16lx\n",
frame->isr);
printk(" CURRENT SETUP OF EV5 IBOX = %16lx\n",
frame->icsr);
printk(" I-CACHE Reg %s parity error = %16lx\n",
(frame->ic_perr_stat & 0x800L) ?
"Data" : "Tag",
frame->ic_perr_stat);
printk(" D-CACHE error Reg = %16lx\n",
frame->dc_perr_stat);
if (frame->dc_perr_stat & 0x2) {
switch (frame->dc_perr_stat & 0x03c) {
case 8:
printk(" Data error in bank 1\n");
break;
case 4:
printk(" Data error in bank 0\n");
break;
case 20:
printk(" Tag error in bank 1\n");
break;
case 10:
printk(" Tag error in bank 0\n");
break;
}
}
printk(" Effective VA = %16lx\n",
frame->va);
printk(" Reason for D-stream = %16lx\n",
frame->mm_stat);
printk(" EV5 SCache address = %16lx\n",
frame->sc_addr);
printk(" EV5 SCache TAG/Data parity = %16lx\n",
frame->sc_stat);
printk(" EV5 BC_TAG_ADDR = %16lx\n",
frame->bc_tag_addr);
printk(" EV5 EI_ADDR: Phys addr of Xfer = %16lx\n",
frame->ei_addr);
printk(" Fill Syndrome = %16lx\n",
frame->fill_syndrome);
printk(" EI_STAT reg = %16lx\n",
frame->ei_stat);
printk(" LD_LOCK = %16lx\n",
frame->ld_lock);
}
static void
mcpcia_print_system_area(unsigned long la_ptr)
{
struct el_common *frame;
struct pci_controller *hose;
struct IOD_subpacket {
unsigned long base;
unsigned int whoami;
unsigned int rsvd1;
unsigned int pci_rev;
unsigned int cap_ctrl;
unsigned int hae_mem;
unsigned int hae_io;
unsigned int int_ctl;
unsigned int int_reg;
unsigned int int_mask0;
unsigned int int_mask1;
unsigned int mc_err0;
unsigned int mc_err1;
unsigned int cap_err;
unsigned int rsvd2;
unsigned int pci_err1;
unsigned int mdpa_stat;
unsigned int mdpa_syn;
unsigned int mdpb_stat;
unsigned int mdpb_syn;
unsigned int rsvd3;
unsigned int rsvd4;
unsigned int rsvd5;
} *iodpp;
frame = (struct el_common *)la_ptr;
iodpp = (struct IOD_subpacket *) (la_ptr + frame->sys_offset);
for (hose = hose_head; hose; hose = hose->next, iodpp++) {
printk("IOD %d Register Subpacket - Bridge Base Address %16lx\n",
hose->index, iodpp->base);
printk(" WHOAMI = %8x\n", iodpp->whoami);
printk(" PCI_REV = %8x\n", iodpp->pci_rev);
printk(" CAP_CTRL = %8x\n", iodpp->cap_ctrl);
printk(" HAE_MEM = %8x\n", iodpp->hae_mem);
printk(" HAE_IO = %8x\n", iodpp->hae_io);
printk(" INT_CTL = %8x\n", iodpp->int_ctl);
printk(" INT_REG = %8x\n", iodpp->int_reg);
printk(" INT_MASK0 = %8x\n", iodpp->int_mask0);
printk(" INT_MASK1 = %8x\n", iodpp->int_mask1);
printk(" MC_ERR0 = %8x\n", iodpp->mc_err0);
printk(" MC_ERR1 = %8x\n", iodpp->mc_err1);
printk(" CAP_ERR = %8x\n", iodpp->cap_err);
printk(" PCI_ERR1 = %8x\n", iodpp->pci_err1);
printk(" MDPA_STAT = %8x\n", iodpp->mdpa_stat);
printk(" MDPA_SYN = %8x\n", iodpp->mdpa_syn);
printk(" MDPB_STAT = %8x\n", iodpp->mdpb_stat);
printk(" MDPB_SYN = %8x\n", iodpp->mdpb_syn);
}
}
void
mcpcia_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header;
struct el_MCPCIA_uncorrected_frame_mcheck *mchk_logout;
unsigned int cpu = smp_processor_id();
int expected;
mchk_header = (struct el_common *)la_ptr;
mchk_logout = (struct el_MCPCIA_uncorrected_frame_mcheck *)la_ptr;
expected = mcheck_expected(cpu);
mb();
mb(); /* magic */
draina();
switch (expected) {
case 0:
{
/* FIXME: how do we figure out which hose the
error was on? */
struct pci_controller *hose;
for (hose = hose_head; hose; hose = hose->next)
mcpcia_pci_clr_err(MCPCIA_HOSE2MID(hose->index));
break;
}
case 1:
mcpcia_pci_clr_err(mcheck_extra(cpu));
break;
default:
/* Otherwise, we're being called from mcpcia_probe_hose
and there's no hose clear an error from. */
break;
}
wrmces(0x7);
mb();
process_mcheck_info(vector, la_ptr, "MCPCIA", expected != 0);
if (!expected && vector != 0x620 && vector != 0x630) {
mcpcia_print_uncorrectable(mchk_logout);
mcpcia_print_system_area(la_ptr);
}
}