344 строки
11 KiB
C
344 строки
11 KiB
C
/*
|
|
* Atmel Touch Screen Driver
|
|
*
|
|
* Copyright (c) 2008 ATMEL
|
|
* Copyright (c) 2008 Dan Liang
|
|
* Copyright (c) 2008 TimeSys Corporation
|
|
* Copyright (c) 2008 Justin Waters
|
|
*
|
|
* Based on touchscreen code from Atmel Corporation.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/init.h>
|
|
#include <linux/err.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/input.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
|
|
/* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */
|
|
|
|
#define ATMEL_TSADCC_CR 0x00 /* Control register */
|
|
#define ATMEL_TSADCC_SWRST (1 << 0) /* Software Reset*/
|
|
#define ATMEL_TSADCC_START (1 << 1) /* Start conversion */
|
|
|
|
#define ATMEL_TSADCC_MR 0x04 /* Mode register */
|
|
#define ATMEL_TSADCC_TSAMOD (3 << 0) /* ADC mode */
|
|
#define ATMEL_TSADCC_TSAMOD_ADC_ONLY_MODE (0x0) /* ADC Mode */
|
|
#define ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE (0x1) /* Touch Screen Only Mode */
|
|
#define ATMEL_TSADCC_LOWRES (1 << 4) /* Resolution selection */
|
|
#define ATMEL_TSADCC_SLEEP (1 << 5) /* Sleep mode */
|
|
#define ATMEL_TSADCC_PENDET (1 << 6) /* Pen Detect selection */
|
|
#define ATMEL_TSADCC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */
|
|
#define ATMEL_TSADCC_STARTUP (0x7f << 16) /* Start Up time */
|
|
#define ATMEL_TSADCC_SHTIM (0xf << 24) /* Sample & Hold time */
|
|
#define ATMEL_TSADCC_PENDBC (0xf << 28) /* Pen Detect debouncing time */
|
|
|
|
#define ATMEL_TSADCC_TRGR 0x08 /* Trigger register */
|
|
#define ATMEL_TSADCC_TRGMOD (7 << 0) /* Trigger mode */
|
|
#define ATMEL_TSADCC_TRGMOD_NONE (0 << 0)
|
|
#define ATMEL_TSADCC_TRGMOD_EXT_RISING (1 << 0)
|
|
#define ATMEL_TSADCC_TRGMOD_EXT_FALLING (2 << 0)
|
|
#define ATMEL_TSADCC_TRGMOD_EXT_ANY (3 << 0)
|
|
#define ATMEL_TSADCC_TRGMOD_PENDET (4 << 0)
|
|
#define ATMEL_TSADCC_TRGMOD_PERIOD (5 << 0)
|
|
#define ATMEL_TSADCC_TRGMOD_CONTINUOUS (6 << 0)
|
|
#define ATMEL_TSADCC_TRGPER (0xffff << 16) /* Trigger period */
|
|
|
|
#define ATMEL_TSADCC_TSR 0x0C /* Touch Screen register */
|
|
#define ATMEL_TSADCC_TSFREQ (0xf << 0) /* TS Frequency in Interleaved mode */
|
|
#define ATMEL_TSADCC_TSSHTIM (0xf << 24) /* Sample & Hold time */
|
|
|
|
#define ATMEL_TSADCC_CHER 0x10 /* Channel Enable register */
|
|
#define ATMEL_TSADCC_CHDR 0x14 /* Channel Disable register */
|
|
#define ATMEL_TSADCC_CHSR 0x18 /* Channel Status register */
|
|
#define ATMEL_TSADCC_CH(n) (1 << (n)) /* Channel number */
|
|
|
|
#define ATMEL_TSADCC_SR 0x1C /* Status register */
|
|
#define ATMEL_TSADCC_EOC(n) (1 << ((n)+0)) /* End of conversion for channel N */
|
|
#define ATMEL_TSADCC_OVRE(n) (1 << ((n)+8)) /* Overrun error for channel N */
|
|
#define ATMEL_TSADCC_DRDY (1 << 16) /* Data Ready */
|
|
#define ATMEL_TSADCC_GOVRE (1 << 17) /* General Overrun Error */
|
|
#define ATMEL_TSADCC_ENDRX (1 << 18) /* End of RX Buffer */
|
|
#define ATMEL_TSADCC_RXBUFF (1 << 19) /* TX Buffer full */
|
|
#define ATMEL_TSADCC_PENCNT (1 << 20) /* Pen contact */
|
|
#define ATMEL_TSADCC_NOCNT (1 << 21) /* No contact */
|
|
|
|
#define ATMEL_TSADCC_LCDR 0x20 /* Last Converted Data register */
|
|
#define ATMEL_TSADCC_DATA (0x3ff << 0) /* Channel data */
|
|
|
|
#define ATMEL_TSADCC_IER 0x24 /* Interrupt Enable register */
|
|
#define ATMEL_TSADCC_IDR 0x28 /* Interrupt Disable register */
|
|
#define ATMEL_TSADCC_IMR 0x2C /* Interrupt Mask register */
|
|
#define ATMEL_TSADCC_CDR0 0x30 /* Channel Data 0 */
|
|
#define ATMEL_TSADCC_CDR1 0x34 /* Channel Data 1 */
|
|
#define ATMEL_TSADCC_CDR2 0x38 /* Channel Data 2 */
|
|
#define ATMEL_TSADCC_CDR3 0x3C /* Channel Data 3 */
|
|
#define ATMEL_TSADCC_CDR4 0x40 /* Channel Data 4 */
|
|
#define ATMEL_TSADCC_CDR5 0x44 /* Channel Data 5 */
|
|
|
|
#define ADC_CLOCK 1000000
|
|
|
|
struct atmel_tsadcc {
|
|
struct input_dev *input;
|
|
char phys[32];
|
|
struct clk *clk;
|
|
int irq;
|
|
unsigned int prev_absx;
|
|
unsigned int prev_absy;
|
|
unsigned char bufferedmeasure;
|
|
};
|
|
|
|
static void __iomem *tsc_base;
|
|
|
|
#define atmel_tsadcc_read(reg) __raw_readl(tsc_base + (reg))
|
|
#define atmel_tsadcc_write(reg, val) __raw_writel((val), tsc_base + (reg))
|
|
|
|
static irqreturn_t atmel_tsadcc_interrupt(int irq, void *dev)
|
|
{
|
|
struct atmel_tsadcc *ts_dev = (struct atmel_tsadcc *)dev;
|
|
struct input_dev *input_dev = ts_dev->input;
|
|
|
|
unsigned int status;
|
|
unsigned int reg;
|
|
|
|
status = atmel_tsadcc_read(ATMEL_TSADCC_SR);
|
|
status &= atmel_tsadcc_read(ATMEL_TSADCC_IMR);
|
|
|
|
if (status & ATMEL_TSADCC_NOCNT) {
|
|
/* Contact lost */
|
|
reg = atmel_tsadcc_read(ATMEL_TSADCC_MR) | ATMEL_TSADCC_PENDBC;
|
|
|
|
atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
|
|
atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE);
|
|
atmel_tsadcc_write(ATMEL_TSADCC_IDR,
|
|
ATMEL_TSADCC_EOC(3) | ATMEL_TSADCC_NOCNT);
|
|
atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT);
|
|
|
|
input_report_key(input_dev, BTN_TOUCH, 0);
|
|
ts_dev->bufferedmeasure = 0;
|
|
input_sync(input_dev);
|
|
|
|
} else if (status & ATMEL_TSADCC_PENCNT) {
|
|
/* Pen detected */
|
|
reg = atmel_tsadcc_read(ATMEL_TSADCC_MR);
|
|
reg &= ~ATMEL_TSADCC_PENDBC;
|
|
|
|
atmel_tsadcc_write(ATMEL_TSADCC_IDR, ATMEL_TSADCC_PENCNT);
|
|
atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
|
|
atmel_tsadcc_write(ATMEL_TSADCC_IER,
|
|
ATMEL_TSADCC_EOC(3) | ATMEL_TSADCC_NOCNT);
|
|
atmel_tsadcc_write(ATMEL_TSADCC_TRGR,
|
|
ATMEL_TSADCC_TRGMOD_PERIOD | (0x0FFF << 16));
|
|
|
|
} else if (status & ATMEL_TSADCC_EOC(3)) {
|
|
/* Conversion finished */
|
|
|
|
if (ts_dev->bufferedmeasure) {
|
|
/* Last measurement is always discarded, since it can
|
|
* be erroneous.
|
|
* Always report previous measurement */
|
|
input_report_abs(input_dev, ABS_X, ts_dev->prev_absx);
|
|
input_report_abs(input_dev, ABS_Y, ts_dev->prev_absy);
|
|
input_report_key(input_dev, BTN_TOUCH, 1);
|
|
input_sync(input_dev);
|
|
} else
|
|
ts_dev->bufferedmeasure = 1;
|
|
|
|
/* Now make new measurement */
|
|
ts_dev->prev_absx = atmel_tsadcc_read(ATMEL_TSADCC_CDR3) << 10;
|
|
ts_dev->prev_absx /= atmel_tsadcc_read(ATMEL_TSADCC_CDR2);
|
|
|
|
ts_dev->prev_absy = atmel_tsadcc_read(ATMEL_TSADCC_CDR1) << 10;
|
|
ts_dev->prev_absy /= atmel_tsadcc_read(ATMEL_TSADCC_CDR0);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* The functions for inserting/removing us as a module.
|
|
*/
|
|
|
|
static int __devinit atmel_tsadcc_probe(struct platform_device *pdev)
|
|
{
|
|
struct atmel_tsadcc *ts_dev;
|
|
struct input_dev *input_dev;
|
|
struct resource *res;
|
|
int err = 0;
|
|
unsigned int prsc;
|
|
unsigned int reg;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
dev_err(&pdev->dev, "no mmio resource defined.\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
/* Allocate memory for device */
|
|
ts_dev = kzalloc(sizeof(struct atmel_tsadcc), GFP_KERNEL);
|
|
if (!ts_dev) {
|
|
dev_err(&pdev->dev, "failed to allocate memory.\n");
|
|
return -ENOMEM;
|
|
}
|
|
platform_set_drvdata(pdev, ts_dev);
|
|
|
|
input_dev = input_allocate_device();
|
|
if (!input_dev) {
|
|
dev_err(&pdev->dev, "failed to allocate input device.\n");
|
|
err = -EBUSY;
|
|
goto err_free_mem;
|
|
}
|
|
|
|
ts_dev->irq = platform_get_irq(pdev, 0);
|
|
if (ts_dev->irq < 0) {
|
|
dev_err(&pdev->dev, "no irq ID is designated.\n");
|
|
err = -ENODEV;
|
|
goto err_free_dev;
|
|
}
|
|
|
|
if (!request_mem_region(res->start, res->end - res->start + 1,
|
|
"atmel tsadcc regs")) {
|
|
dev_err(&pdev->dev, "resources is unavailable.\n");
|
|
err = -EBUSY;
|
|
goto err_free_dev;
|
|
}
|
|
|
|
tsc_base = ioremap(res->start, res->end - res->start + 1);
|
|
if (!tsc_base) {
|
|
dev_err(&pdev->dev, "failed to map registers.\n");
|
|
err = -ENOMEM;
|
|
goto err_release_mem;
|
|
}
|
|
|
|
err = request_irq(ts_dev->irq, atmel_tsadcc_interrupt, IRQF_DISABLED,
|
|
pdev->dev.driver->name, ts_dev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "failed to allocate irq.\n");
|
|
goto err_unmap_regs;
|
|
}
|
|
|
|
ts_dev->clk = clk_get(&pdev->dev, "tsc_clk");
|
|
if (IS_ERR(ts_dev->clk)) {
|
|
dev_err(&pdev->dev, "failed to get ts_clk\n");
|
|
err = PTR_ERR(ts_dev->clk);
|
|
goto err_free_irq;
|
|
}
|
|
|
|
ts_dev->input = input_dev;
|
|
ts_dev->bufferedmeasure = 0;
|
|
|
|
snprintf(ts_dev->phys, sizeof(ts_dev->phys),
|
|
"%s/input0", pdev->dev.bus_id);
|
|
|
|
input_dev->name = "atmel touch screen controller";
|
|
input_dev->phys = ts_dev->phys;
|
|
input_dev->dev.parent = &pdev->dev;
|
|
|
|
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
|
|
input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
|
|
|
|
input_set_abs_params(input_dev, ABS_X, 0, 0x3FF, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_Y, 0, 0x3FF, 0, 0);
|
|
|
|
/* clk_enable() always returns 0, no need to check it */
|
|
clk_enable(ts_dev->clk);
|
|
|
|
prsc = clk_get_rate(ts_dev->clk);
|
|
dev_info(&pdev->dev, "Master clock is set at: %d Hz\n", prsc);
|
|
|
|
prsc = prsc / ADC_CLOCK / 2 - 1;
|
|
|
|
reg = ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE |
|
|
((0x00 << 5) & ATMEL_TSADCC_SLEEP) | /* Normal Mode */
|
|
((0x01 << 6) & ATMEL_TSADCC_PENDET) | /* Enable Pen Detect */
|
|
((prsc << 8) & ATMEL_TSADCC_PRESCAL) | /* PRESCAL */
|
|
((0x13 << 16) & ATMEL_TSADCC_STARTUP) | /* STARTUP */
|
|
((0x0F << 28) & ATMEL_TSADCC_PENDBC); /* PENDBC */
|
|
|
|
atmel_tsadcc_write(ATMEL_TSADCC_CR, ATMEL_TSADCC_SWRST);
|
|
atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
|
|
atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE);
|
|
atmel_tsadcc_write(ATMEL_TSADCC_TSR, (0x3 << 24) & ATMEL_TSADCC_TSSHTIM);
|
|
|
|
atmel_tsadcc_read(ATMEL_TSADCC_SR);
|
|
atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT);
|
|
|
|
/* All went ok, so register to the input system */
|
|
err = input_register_device(input_dev);
|
|
if (err)
|
|
goto err_fail;
|
|
|
|
return 0;
|
|
|
|
err_fail:
|
|
clk_disable(ts_dev->clk);
|
|
clk_put(ts_dev->clk);
|
|
err_free_irq:
|
|
free_irq(ts_dev->irq, ts_dev);
|
|
err_unmap_regs:
|
|
iounmap(tsc_base);
|
|
err_release_mem:
|
|
release_mem_region(res->start, res->end - res->start + 1);
|
|
err_free_dev:
|
|
input_free_device(ts_dev->input);
|
|
err_free_mem:
|
|
kfree(ts_dev);
|
|
return err;
|
|
}
|
|
|
|
static int __devexit atmel_tsadcc_remove(struct platform_device *pdev)
|
|
{
|
|
struct atmel_tsadcc *ts_dev = dev_get_drvdata(&pdev->dev);
|
|
struct resource *res;
|
|
|
|
free_irq(ts_dev->irq, ts_dev);
|
|
|
|
input_unregister_device(ts_dev->input);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
iounmap(tsc_base);
|
|
release_mem_region(res->start, res->end - res->start + 1);
|
|
|
|
clk_disable(ts_dev->clk);
|
|
clk_put(ts_dev->clk);
|
|
|
|
kfree(ts_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver atmel_tsadcc_driver = {
|
|
.probe = atmel_tsadcc_probe,
|
|
.remove = __devexit_p(atmel_tsadcc_remove),
|
|
.driver = {
|
|
.name = "atmel_tsadcc",
|
|
},
|
|
};
|
|
|
|
static int __init atmel_tsadcc_init(void)
|
|
{
|
|
return platform_driver_register(&atmel_tsadcc_driver);
|
|
}
|
|
|
|
static void __exit atmel_tsadcc_exit(void)
|
|
{
|
|
platform_driver_unregister(&atmel_tsadcc_driver);
|
|
}
|
|
|
|
module_init(atmel_tsadcc_init);
|
|
module_exit(atmel_tsadcc_exit);
|
|
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Atmel TouchScreen Driver");
|
|
MODULE_AUTHOR("Dan Liang <dan.liang@atmel.com>");
|
|
|