409 строки
8.9 KiB
C
409 строки
8.9 KiB
C
/*
|
|
* Elo serial touchscreen driver
|
|
*
|
|
* Copyright (c) 2004 Vojtech Pavlik
|
|
*/
|
|
|
|
/*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
* the Free Software Foundation.
|
|
*/
|
|
|
|
/*
|
|
* This driver can handle serial Elo touchscreens using either the Elo standard
|
|
* 'E271-2210' 10-byte protocol, Elo legacy 'E281A-4002' 6-byte protocol, Elo
|
|
* legacy 'E271-140' 4-byte protocol and Elo legacy 'E261-280' 3-byte protocol.
|
|
*/
|
|
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/input.h>
|
|
#include <linux/serio.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ctype.h>
|
|
|
|
#define DRIVER_DESC "Elo serial touchscreen driver"
|
|
|
|
MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/*
|
|
* Definitions & global arrays.
|
|
*/
|
|
|
|
#define ELO_MAX_LENGTH 10
|
|
|
|
#define ELO10_PACKET_LEN 8
|
|
#define ELO10_TOUCH 0x03
|
|
#define ELO10_PRESSURE 0x80
|
|
|
|
#define ELO10_LEAD_BYTE 'U'
|
|
|
|
#define ELO10_ID_CMD 'i'
|
|
|
|
#define ELO10_TOUCH_PACKET 'T'
|
|
#define ELO10_ACK_PACKET 'A'
|
|
#define ELI10_ID_PACKET 'I'
|
|
|
|
/*
|
|
* Per-touchscreen data.
|
|
*/
|
|
|
|
struct elo {
|
|
struct input_dev *dev;
|
|
struct serio *serio;
|
|
struct mutex cmd_mutex;
|
|
struct completion cmd_done;
|
|
int id;
|
|
int idx;
|
|
unsigned char expected_packet;
|
|
unsigned char csum;
|
|
unsigned char data[ELO_MAX_LENGTH];
|
|
unsigned char response[ELO10_PACKET_LEN];
|
|
char phys[32];
|
|
};
|
|
|
|
static void elo_process_data_10(struct elo *elo, unsigned char data)
|
|
{
|
|
struct input_dev *dev = elo->dev;
|
|
|
|
elo->data[elo->idx] = data;
|
|
switch (elo->idx++) {
|
|
case 0:
|
|
elo->csum = 0xaa;
|
|
if (data != ELO10_LEAD_BYTE) {
|
|
pr_debug("elo: unsynchronized data: 0x%02x\n", data);
|
|
elo->idx = 0;
|
|
}
|
|
break;
|
|
|
|
case 9:
|
|
elo->idx = 0;
|
|
if (data != elo->csum) {
|
|
pr_debug("elo: bad checksum: 0x%02x, expected 0x%02x\n",
|
|
data, elo->csum);
|
|
break;
|
|
}
|
|
if (elo->data[1] != elo->expected_packet) {
|
|
if (elo->data[1] != ELO10_TOUCH_PACKET)
|
|
pr_debug("elo: unexpected packet: 0x%02x\n",
|
|
elo->data[1]);
|
|
break;
|
|
}
|
|
if (likely(elo->data[1] == ELO10_TOUCH_PACKET)) {
|
|
input_report_abs(dev, ABS_X, (elo->data[4] << 8) | elo->data[3]);
|
|
input_report_abs(dev, ABS_Y, (elo->data[6] << 8) | elo->data[5]);
|
|
if (elo->data[2] & ELO10_PRESSURE)
|
|
input_report_abs(dev, ABS_PRESSURE,
|
|
(elo->data[8] << 8) | elo->data[7]);
|
|
input_report_key(dev, BTN_TOUCH, elo->data[2] & ELO10_TOUCH);
|
|
input_sync(dev);
|
|
} else if (elo->data[1] == ELO10_ACK_PACKET) {
|
|
if (elo->data[2] == '0')
|
|
elo->expected_packet = ELO10_TOUCH_PACKET;
|
|
complete(&elo->cmd_done);
|
|
} else {
|
|
memcpy(elo->response, &elo->data[1], ELO10_PACKET_LEN);
|
|
elo->expected_packet = ELO10_ACK_PACKET;
|
|
}
|
|
break;
|
|
}
|
|
elo->csum += data;
|
|
}
|
|
|
|
static void elo_process_data_6(struct elo *elo, unsigned char data)
|
|
{
|
|
struct input_dev *dev = elo->dev;
|
|
|
|
elo->data[elo->idx] = data;
|
|
|
|
switch (elo->idx++) {
|
|
|
|
case 0: if ((data & 0xc0) != 0xc0) elo->idx = 0; break;
|
|
case 1: if ((data & 0xc0) != 0x80) elo->idx = 0; break;
|
|
case 2: if ((data & 0xc0) != 0x40) elo->idx = 0; break;
|
|
|
|
case 3:
|
|
if (data & 0xc0) {
|
|
elo->idx = 0;
|
|
break;
|
|
}
|
|
|
|
input_report_abs(dev, ABS_X, ((elo->data[0] & 0x3f) << 6) | (elo->data[1] & 0x3f));
|
|
input_report_abs(dev, ABS_Y, ((elo->data[2] & 0x3f) << 6) | (elo->data[3] & 0x3f));
|
|
|
|
if (elo->id == 2) {
|
|
input_report_key(dev, BTN_TOUCH, 1);
|
|
input_sync(dev);
|
|
elo->idx = 0;
|
|
}
|
|
|
|
break;
|
|
|
|
case 4:
|
|
if (data) {
|
|
input_sync(dev);
|
|
elo->idx = 0;
|
|
}
|
|
break;
|
|
|
|
case 5:
|
|
if ((data & 0xf0) == 0) {
|
|
input_report_abs(dev, ABS_PRESSURE, elo->data[5]);
|
|
input_report_key(dev, BTN_TOUCH, !!elo->data[5]);
|
|
}
|
|
input_sync(dev);
|
|
elo->idx = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void elo_process_data_3(struct elo *elo, unsigned char data)
|
|
{
|
|
struct input_dev *dev = elo->dev;
|
|
|
|
elo->data[elo->idx] = data;
|
|
|
|
switch (elo->idx++) {
|
|
|
|
case 0:
|
|
if ((data & 0x7f) != 0x01)
|
|
elo->idx = 0;
|
|
break;
|
|
case 2:
|
|
input_report_key(dev, BTN_TOUCH, !(elo->data[1] & 0x80));
|
|
input_report_abs(dev, ABS_X, elo->data[1]);
|
|
input_report_abs(dev, ABS_Y, elo->data[2]);
|
|
input_sync(dev);
|
|
elo->idx = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static irqreturn_t elo_interrupt(struct serio *serio,
|
|
unsigned char data, unsigned int flags)
|
|
{
|
|
struct elo *elo = serio_get_drvdata(serio);
|
|
|
|
switch(elo->id) {
|
|
case 0:
|
|
elo_process_data_10(elo, data);
|
|
break;
|
|
|
|
case 1:
|
|
case 2:
|
|
elo_process_data_6(elo, data);
|
|
break;
|
|
|
|
case 3:
|
|
elo_process_data_3(elo, data);
|
|
break;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int elo_command_10(struct elo *elo, unsigned char *packet)
|
|
{
|
|
int rc = -1;
|
|
int i;
|
|
unsigned char csum = 0xaa + ELO10_LEAD_BYTE;
|
|
|
|
mutex_lock(&elo->cmd_mutex);
|
|
|
|
serio_pause_rx(elo->serio);
|
|
elo->expected_packet = toupper(packet[0]);
|
|
init_completion(&elo->cmd_done);
|
|
serio_continue_rx(elo->serio);
|
|
|
|
if (serio_write(elo->serio, ELO10_LEAD_BYTE))
|
|
goto out;
|
|
|
|
for (i = 0; i < ELO10_PACKET_LEN; i++) {
|
|
csum += packet[i];
|
|
if (serio_write(elo->serio, packet[i]))
|
|
goto out;
|
|
}
|
|
|
|
if (serio_write(elo->serio, csum))
|
|
goto out;
|
|
|
|
wait_for_completion_timeout(&elo->cmd_done, HZ);
|
|
|
|
if (elo->expected_packet == ELO10_TOUCH_PACKET) {
|
|
/* We are back in reporting mode, the command was ACKed */
|
|
memcpy(packet, elo->response, ELO10_PACKET_LEN);
|
|
rc = 0;
|
|
}
|
|
|
|
out:
|
|
mutex_unlock(&elo->cmd_mutex);
|
|
return rc;
|
|
}
|
|
|
|
static int elo_setup_10(struct elo *elo)
|
|
{
|
|
static const char *elo_types[] = { "Accu", "Dura", "Intelli", "Carroll" };
|
|
struct input_dev *dev = elo->dev;
|
|
unsigned char packet[ELO10_PACKET_LEN] = { ELO10_ID_CMD };
|
|
|
|
if (elo_command_10(elo, packet))
|
|
return -1;
|
|
|
|
dev->id.version = (packet[5] << 8) | packet[4];
|
|
|
|
input_set_abs_params(dev, ABS_X, 96, 4000, 0, 0);
|
|
input_set_abs_params(dev, ABS_Y, 96, 4000, 0, 0);
|
|
if (packet[3] & ELO10_PRESSURE)
|
|
input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
|
|
|
|
printk(KERN_INFO "elo: %sTouch touchscreen, fw: %02x.%02x, "
|
|
"features: 0x%02x, controller: 0x%02x\n",
|
|
elo_types[(packet[1] -'0') & 0x03],
|
|
packet[5], packet[4], packet[3], packet[7]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* elo_disconnect() is the opposite of elo_connect()
|
|
*/
|
|
|
|
static void elo_disconnect(struct serio *serio)
|
|
{
|
|
struct elo *elo = serio_get_drvdata(serio);
|
|
|
|
input_get_device(elo->dev);
|
|
input_unregister_device(elo->dev);
|
|
serio_close(serio);
|
|
serio_set_drvdata(serio, NULL);
|
|
input_put_device(elo->dev);
|
|
kfree(elo);
|
|
}
|
|
|
|
/*
|
|
* elo_connect() is the routine that is called when someone adds a
|
|
* new serio device that supports Gunze protocol and registers it as
|
|
* an input device.
|
|
*/
|
|
|
|
static int elo_connect(struct serio *serio, struct serio_driver *drv)
|
|
{
|
|
struct elo *elo;
|
|
struct input_dev *input_dev;
|
|
int err;
|
|
|
|
elo = kzalloc(sizeof(struct elo), GFP_KERNEL);
|
|
input_dev = input_allocate_device();
|
|
if (!elo || !input_dev) {
|
|
err = -ENOMEM;
|
|
goto fail1;
|
|
}
|
|
|
|
elo->serio = serio;
|
|
elo->id = serio->id.id;
|
|
elo->dev = input_dev;
|
|
elo->expected_packet = ELO10_TOUCH_PACKET;
|
|
mutex_init(&elo->cmd_mutex);
|
|
init_completion(&elo->cmd_done);
|
|
snprintf(elo->phys, sizeof(elo->phys), "%s/input0", serio->phys);
|
|
|
|
input_dev->name = "Elo Serial TouchScreen";
|
|
input_dev->phys = elo->phys;
|
|
input_dev->id.bustype = BUS_RS232;
|
|
input_dev->id.vendor = SERIO_ELO;
|
|
input_dev->id.product = elo->id;
|
|
input_dev->id.version = 0x0100;
|
|
input_dev->dev.parent = &serio->dev;
|
|
|
|
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
|
|
input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
|
|
|
|
serio_set_drvdata(serio, elo);
|
|
err = serio_open(serio, drv);
|
|
if (err)
|
|
goto fail2;
|
|
|
|
switch (elo->id) {
|
|
|
|
case 0: /* 10-byte protocol */
|
|
if (elo_setup_10(elo))
|
|
goto fail3;
|
|
|
|
break;
|
|
|
|
case 1: /* 6-byte protocol */
|
|
input_set_abs_params(input_dev, ABS_PRESSURE, 0, 15, 0, 0);
|
|
|
|
case 2: /* 4-byte protocol */
|
|
input_set_abs_params(input_dev, ABS_X, 96, 4000, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_Y, 96, 4000, 0, 0);
|
|
break;
|
|
|
|
case 3: /* 3-byte protocol */
|
|
input_set_abs_params(input_dev, ABS_X, 0, 255, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_Y, 0, 255, 0, 0);
|
|
break;
|
|
}
|
|
|
|
err = input_register_device(elo->dev);
|
|
if (err)
|
|
goto fail3;
|
|
|
|
return 0;
|
|
|
|
fail3: serio_close(serio);
|
|
fail2: serio_set_drvdata(serio, NULL);
|
|
fail1: input_free_device(input_dev);
|
|
kfree(elo);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* The serio driver structure.
|
|
*/
|
|
|
|
static struct serio_device_id elo_serio_ids[] = {
|
|
{
|
|
.type = SERIO_RS232,
|
|
.proto = SERIO_ELO,
|
|
.id = SERIO_ANY,
|
|
.extra = SERIO_ANY,
|
|
},
|
|
{ 0 }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(serio, elo_serio_ids);
|
|
|
|
static struct serio_driver elo_drv = {
|
|
.driver = {
|
|
.name = "elo",
|
|
},
|
|
.description = DRIVER_DESC,
|
|
.id_table = elo_serio_ids,
|
|
.interrupt = elo_interrupt,
|
|
.connect = elo_connect,
|
|
.disconnect = elo_disconnect,
|
|
};
|
|
|
|
/*
|
|
* The functions for inserting/removing us as a module.
|
|
*/
|
|
|
|
static int __init elo_init(void)
|
|
{
|
|
return serio_register_driver(&elo_drv);
|
|
}
|
|
|
|
static void __exit elo_exit(void)
|
|
{
|
|
serio_unregister_driver(&elo_drv);
|
|
}
|
|
|
|
module_init(elo_init);
|
|
module_exit(elo_exit);
|