1130 строки
32 KiB
C
1130 строки
32 KiB
C
/*
|
|
* IBM Hot Plug Controller Driver
|
|
*
|
|
* Written By: Jyoti Shah, IBM Corporation
|
|
*
|
|
* Copyright (C) 2001-2003 IBM Corp.
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
|
|
* NON INFRINGEMENT. See the GNU General Public License for more
|
|
* details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Send feedback to <gregkh@us.ibm.com>
|
|
* <jshah@us.ibm.com>
|
|
*
|
|
*/
|
|
|
|
#include <linux/wait.h>
|
|
#include <linux/time.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/semaphore.h>
|
|
#include <linux/kthread.h>
|
|
#include "ibmphp.h"
|
|
|
|
static int to_debug = 0;
|
|
#define debug_polling(fmt, arg...) do { if (to_debug) debug(fmt, arg); } while (0)
|
|
|
|
//----------------------------------------------------------------------------
|
|
// timeout values
|
|
//----------------------------------------------------------------------------
|
|
#define CMD_COMPLETE_TOUT_SEC 60 // give HPC 60 sec to finish cmd
|
|
#define HPC_CTLR_WORKING_TOUT 60 // give HPC 60 sec to finish cmd
|
|
#define HPC_GETACCESS_TIMEOUT 60 // seconds
|
|
#define POLL_INTERVAL_SEC 2 // poll HPC every 2 seconds
|
|
#define POLL_LATCH_CNT 5 // poll latch 5 times, then poll slots
|
|
|
|
//----------------------------------------------------------------------------
|
|
// Winnipeg Architected Register Offsets
|
|
//----------------------------------------------------------------------------
|
|
#define WPG_I2CMBUFL_OFFSET 0x08 // I2C Message Buffer Low
|
|
#define WPG_I2CMOSUP_OFFSET 0x10 // I2C Master Operation Setup Reg
|
|
#define WPG_I2CMCNTL_OFFSET 0x20 // I2C Master Control Register
|
|
#define WPG_I2CPARM_OFFSET 0x40 // I2C Parameter Register
|
|
#define WPG_I2CSTAT_OFFSET 0x70 // I2C Status Register
|
|
|
|
//----------------------------------------------------------------------------
|
|
// Winnipeg Store Type commands (Add this commands to the register offset)
|
|
//----------------------------------------------------------------------------
|
|
#define WPG_I2C_AND 0x1000 // I2C AND operation
|
|
#define WPG_I2C_OR 0x2000 // I2C OR operation
|
|
|
|
//----------------------------------------------------------------------------
|
|
// Command set for I2C Master Operation Setup Register
|
|
//----------------------------------------------------------------------------
|
|
#define WPG_READATADDR_MASK 0x00010000 // read,bytes,I2C shifted,index
|
|
#define WPG_WRITEATADDR_MASK 0x40010000 // write,bytes,I2C shifted,index
|
|
#define WPG_READDIRECT_MASK 0x10010000
|
|
#define WPG_WRITEDIRECT_MASK 0x60010000
|
|
|
|
|
|
//----------------------------------------------------------------------------
|
|
// bit masks for I2C Master Control Register
|
|
//----------------------------------------------------------------------------
|
|
#define WPG_I2CMCNTL_STARTOP_MASK 0x00000002 // Start the Operation
|
|
|
|
//----------------------------------------------------------------------------
|
|
//
|
|
//----------------------------------------------------------------------------
|
|
#define WPG_I2C_IOREMAP_SIZE 0x2044 // size of linear address interval
|
|
|
|
//----------------------------------------------------------------------------
|
|
// command index
|
|
//----------------------------------------------------------------------------
|
|
#define WPG_1ST_SLOT_INDEX 0x01 // index - 1st slot for ctlr
|
|
#define WPG_CTLR_INDEX 0x0F // index - ctlr
|
|
#define WPG_1ST_EXTSLOT_INDEX 0x10 // index - 1st ext slot for ctlr
|
|
#define WPG_1ST_BUS_INDEX 0x1F // index - 1st bus for ctlr
|
|
|
|
//----------------------------------------------------------------------------
|
|
// macro utilities
|
|
//----------------------------------------------------------------------------
|
|
// if bits 20,22,25,26,27,29,30 are OFF return 1
|
|
#define HPC_I2CSTATUS_CHECK(s) ((u8)((s & 0x00000A76) ? 0 : 1))
|
|
|
|
//----------------------------------------------------------------------------
|
|
// global variables
|
|
//----------------------------------------------------------------------------
|
|
static struct mutex sem_hpcaccess; // lock access to HPC
|
|
static struct semaphore semOperations; // lock all operations and
|
|
// access to data structures
|
|
static struct semaphore sem_exit; // make sure polling thread goes away
|
|
static struct task_struct *ibmphp_poll_thread;
|
|
//----------------------------------------------------------------------------
|
|
// local function prototypes
|
|
//----------------------------------------------------------------------------
|
|
static u8 i2c_ctrl_read(struct controller *, void __iomem *, u8);
|
|
static u8 i2c_ctrl_write(struct controller *, void __iomem *, u8, u8);
|
|
static u8 hpc_writecmdtoindex(u8, u8);
|
|
static u8 hpc_readcmdtoindex(u8, u8);
|
|
static void get_hpc_access(void);
|
|
static void free_hpc_access(void);
|
|
static int poll_hpc(void *data);
|
|
static int process_changeinstatus(struct slot *, struct slot *);
|
|
static int process_changeinlatch(u8, u8, struct controller *);
|
|
static int hpc_wait_ctlr_notworking(int, struct controller *, void __iomem *, u8 *);
|
|
//----------------------------------------------------------------------------
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
* Name: ibmphp_hpc_initvars
|
|
*
|
|
* Action: initialize semaphores and variables
|
|
*---------------------------------------------------------------------*/
|
|
void __init ibmphp_hpc_initvars(void)
|
|
{
|
|
debug("%s - Entry\n", __func__);
|
|
|
|
mutex_init(&sem_hpcaccess);
|
|
sema_init(&semOperations, 1);
|
|
sema_init(&sem_exit, 0);
|
|
to_debug = 0;
|
|
|
|
debug("%s - Exit\n", __func__);
|
|
}
|
|
|
|
/*----------------------------------------------------------------------
|
|
* Name: i2c_ctrl_read
|
|
*
|
|
* Action: read from HPC over I2C
|
|
*
|
|
*---------------------------------------------------------------------*/
|
|
static u8 i2c_ctrl_read(struct controller *ctlr_ptr, void __iomem *WPGBbar, u8 index)
|
|
{
|
|
u8 status;
|
|
int i;
|
|
void __iomem *wpg_addr; // base addr + offset
|
|
unsigned long wpg_data; // data to/from WPG LOHI format
|
|
unsigned long ultemp;
|
|
unsigned long data; // actual data HILO format
|
|
|
|
debug_polling("%s - Entry WPGBbar[%p] index[%x] \n", __func__, WPGBbar, index);
|
|
|
|
//--------------------------------------------------------------------
|
|
// READ - step 1
|
|
// read at address, byte length, I2C address (shifted), index
|
|
// or read direct, byte length, index
|
|
if (ctlr_ptr->ctlr_type == 0x02) {
|
|
data = WPG_READATADDR_MASK;
|
|
// fill in I2C address
|
|
ultemp = (unsigned long)ctlr_ptr->u.wpeg_ctlr.i2c_addr;
|
|
ultemp = ultemp >> 1;
|
|
data |= (ultemp << 8);
|
|
|
|
// fill in index
|
|
data |= (unsigned long)index;
|
|
} else if (ctlr_ptr->ctlr_type == 0x04) {
|
|
data = WPG_READDIRECT_MASK;
|
|
|
|
// fill in index
|
|
ultemp = (unsigned long)index;
|
|
ultemp = ultemp << 8;
|
|
data |= ultemp;
|
|
} else {
|
|
err("this controller type is not supported \n");
|
|
return HPC_ERROR;
|
|
}
|
|
|
|
wpg_data = swab32(data); // swap data before writing
|
|
wpg_addr = WPGBbar + WPG_I2CMOSUP_OFFSET;
|
|
writel(wpg_data, wpg_addr);
|
|
|
|
//--------------------------------------------------------------------
|
|
// READ - step 2 : clear the message buffer
|
|
data = 0x00000000;
|
|
wpg_data = swab32(data);
|
|
wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
|
|
writel(wpg_data, wpg_addr);
|
|
|
|
//--------------------------------------------------------------------
|
|
// READ - step 3 : issue start operation, I2C master control bit 30:ON
|
|
// 2020 : [20] OR operation at [20] offset 0x20
|
|
data = WPG_I2CMCNTL_STARTOP_MASK;
|
|
wpg_data = swab32(data);
|
|
wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET + WPG_I2C_OR;
|
|
writel(wpg_data, wpg_addr);
|
|
|
|
//--------------------------------------------------------------------
|
|
// READ - step 4 : wait until start operation bit clears
|
|
i = CMD_COMPLETE_TOUT_SEC;
|
|
while (i) {
|
|
msleep(10);
|
|
wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET;
|
|
wpg_data = readl(wpg_addr);
|
|
data = swab32(wpg_data);
|
|
if (!(data & WPG_I2CMCNTL_STARTOP_MASK))
|
|
break;
|
|
i--;
|
|
}
|
|
if (i == 0) {
|
|
debug("%s - Error : WPG timeout\n", __func__);
|
|
return HPC_ERROR;
|
|
}
|
|
//--------------------------------------------------------------------
|
|
// READ - step 5 : read I2C status register
|
|
i = CMD_COMPLETE_TOUT_SEC;
|
|
while (i) {
|
|
msleep(10);
|
|
wpg_addr = WPGBbar + WPG_I2CSTAT_OFFSET;
|
|
wpg_data = readl(wpg_addr);
|
|
data = swab32(wpg_data);
|
|
if (HPC_I2CSTATUS_CHECK(data))
|
|
break;
|
|
i--;
|
|
}
|
|
if (i == 0) {
|
|
debug("ctrl_read - Exit Error:I2C timeout\n");
|
|
return HPC_ERROR;
|
|
}
|
|
|
|
//--------------------------------------------------------------------
|
|
// READ - step 6 : get DATA
|
|
wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
|
|
wpg_data = readl(wpg_addr);
|
|
data = swab32(wpg_data);
|
|
|
|
status = (u8) data;
|
|
|
|
debug_polling("%s - Exit index[%x] status[%x]\n", __func__, index, status);
|
|
|
|
return (status);
|
|
}
|
|
|
|
/*----------------------------------------------------------------------
|
|
* Name: i2c_ctrl_write
|
|
*
|
|
* Action: write to HPC over I2C
|
|
*
|
|
* Return 0 or error codes
|
|
*---------------------------------------------------------------------*/
|
|
static u8 i2c_ctrl_write(struct controller *ctlr_ptr, void __iomem *WPGBbar, u8 index, u8 cmd)
|
|
{
|
|
u8 rc;
|
|
void __iomem *wpg_addr; // base addr + offset
|
|
unsigned long wpg_data; // data to/from WPG LOHI format
|
|
unsigned long ultemp;
|
|
unsigned long data; // actual data HILO format
|
|
int i;
|
|
|
|
debug_polling("%s - Entry WPGBbar[%p] index[%x] cmd[%x]\n", __func__, WPGBbar, index, cmd);
|
|
|
|
rc = 0;
|
|
//--------------------------------------------------------------------
|
|
// WRITE - step 1
|
|
// write at address, byte length, I2C address (shifted), index
|
|
// or write direct, byte length, index
|
|
data = 0x00000000;
|
|
|
|
if (ctlr_ptr->ctlr_type == 0x02) {
|
|
data = WPG_WRITEATADDR_MASK;
|
|
// fill in I2C address
|
|
ultemp = (unsigned long)ctlr_ptr->u.wpeg_ctlr.i2c_addr;
|
|
ultemp = ultemp >> 1;
|
|
data |= (ultemp << 8);
|
|
|
|
// fill in index
|
|
data |= (unsigned long)index;
|
|
} else if (ctlr_ptr->ctlr_type == 0x04) {
|
|
data = WPG_WRITEDIRECT_MASK;
|
|
|
|
// fill in index
|
|
ultemp = (unsigned long)index;
|
|
ultemp = ultemp << 8;
|
|
data |= ultemp;
|
|
} else {
|
|
err("this controller type is not supported \n");
|
|
return HPC_ERROR;
|
|
}
|
|
|
|
wpg_data = swab32(data); // swap data before writing
|
|
wpg_addr = WPGBbar + WPG_I2CMOSUP_OFFSET;
|
|
writel(wpg_data, wpg_addr);
|
|
|
|
//--------------------------------------------------------------------
|
|
// WRITE - step 2 : clear the message buffer
|
|
data = 0x00000000 | (unsigned long)cmd;
|
|
wpg_data = swab32(data);
|
|
wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
|
|
writel(wpg_data, wpg_addr);
|
|
|
|
//--------------------------------------------------------------------
|
|
// WRITE - step 3 : issue start operation,I2C master control bit 30:ON
|
|
// 2020 : [20] OR operation at [20] offset 0x20
|
|
data = WPG_I2CMCNTL_STARTOP_MASK;
|
|
wpg_data = swab32(data);
|
|
wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET + WPG_I2C_OR;
|
|
writel(wpg_data, wpg_addr);
|
|
|
|
//--------------------------------------------------------------------
|
|
// WRITE - step 4 : wait until start operation bit clears
|
|
i = CMD_COMPLETE_TOUT_SEC;
|
|
while (i) {
|
|
msleep(10);
|
|
wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET;
|
|
wpg_data = readl(wpg_addr);
|
|
data = swab32(wpg_data);
|
|
if (!(data & WPG_I2CMCNTL_STARTOP_MASK))
|
|
break;
|
|
i--;
|
|
}
|
|
if (i == 0) {
|
|
debug("%s - Exit Error:WPG timeout\n", __func__);
|
|
rc = HPC_ERROR;
|
|
}
|
|
|
|
//--------------------------------------------------------------------
|
|
// WRITE - step 5 : read I2C status register
|
|
i = CMD_COMPLETE_TOUT_SEC;
|
|
while (i) {
|
|
msleep(10);
|
|
wpg_addr = WPGBbar + WPG_I2CSTAT_OFFSET;
|
|
wpg_data = readl(wpg_addr);
|
|
data = swab32(wpg_data);
|
|
if (HPC_I2CSTATUS_CHECK(data))
|
|
break;
|
|
i--;
|
|
}
|
|
if (i == 0) {
|
|
debug("ctrl_read - Error : I2C timeout\n");
|
|
rc = HPC_ERROR;
|
|
}
|
|
|
|
debug_polling("%s Exit rc[%x]\n", __func__, rc);
|
|
return (rc);
|
|
}
|
|
|
|
//------------------------------------------------------------
|
|
// Read from ISA type HPC
|
|
//------------------------------------------------------------
|
|
static u8 isa_ctrl_read(struct controller *ctlr_ptr, u8 offset)
|
|
{
|
|
u16 start_address;
|
|
u16 end_address;
|
|
u8 data;
|
|
|
|
start_address = ctlr_ptr->u.isa_ctlr.io_start;
|
|
end_address = ctlr_ptr->u.isa_ctlr.io_end;
|
|
data = inb(start_address + offset);
|
|
return data;
|
|
}
|
|
|
|
//--------------------------------------------------------------
|
|
// Write to ISA type HPC
|
|
//--------------------------------------------------------------
|
|
static void isa_ctrl_write(struct controller *ctlr_ptr, u8 offset, u8 data)
|
|
{
|
|
u16 start_address;
|
|
u16 port_address;
|
|
|
|
start_address = ctlr_ptr->u.isa_ctlr.io_start;
|
|
port_address = start_address + (u16) offset;
|
|
outb(data, port_address);
|
|
}
|
|
|
|
static u8 pci_ctrl_read(struct controller *ctrl, u8 offset)
|
|
{
|
|
u8 data = 0x00;
|
|
debug("inside pci_ctrl_read\n");
|
|
if (ctrl->ctrl_dev)
|
|
pci_read_config_byte(ctrl->ctrl_dev, HPC_PCI_OFFSET + offset, &data);
|
|
return data;
|
|
}
|
|
|
|
static u8 pci_ctrl_write(struct controller *ctrl, u8 offset, u8 data)
|
|
{
|
|
u8 rc = -ENODEV;
|
|
debug("inside pci_ctrl_write\n");
|
|
if (ctrl->ctrl_dev) {
|
|
pci_write_config_byte(ctrl->ctrl_dev, HPC_PCI_OFFSET + offset, data);
|
|
rc = 0;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
static u8 ctrl_read(struct controller *ctlr, void __iomem *base, u8 offset)
|
|
{
|
|
u8 rc;
|
|
switch (ctlr->ctlr_type) {
|
|
case 0:
|
|
rc = isa_ctrl_read(ctlr, offset);
|
|
break;
|
|
case 1:
|
|
rc = pci_ctrl_read(ctlr, offset);
|
|
break;
|
|
case 2:
|
|
case 4:
|
|
rc = i2c_ctrl_read(ctlr, base, offset);
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
static u8 ctrl_write(struct controller *ctlr, void __iomem *base, u8 offset, u8 data)
|
|
{
|
|
u8 rc = 0;
|
|
switch (ctlr->ctlr_type) {
|
|
case 0:
|
|
isa_ctrl_write(ctlr, offset, data);
|
|
break;
|
|
case 1:
|
|
rc = pci_ctrl_write(ctlr, offset, data);
|
|
break;
|
|
case 2:
|
|
case 4:
|
|
rc = i2c_ctrl_write(ctlr, base, offset, data);
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
return rc;
|
|
}
|
|
/*----------------------------------------------------------------------
|
|
* Name: hpc_writecmdtoindex()
|
|
*
|
|
* Action: convert a write command to proper index within a controller
|
|
*
|
|
* Return index, HPC_ERROR
|
|
*---------------------------------------------------------------------*/
|
|
static u8 hpc_writecmdtoindex(u8 cmd, u8 index)
|
|
{
|
|
u8 rc;
|
|
|
|
switch (cmd) {
|
|
case HPC_CTLR_ENABLEIRQ: // 0x00.N.15
|
|
case HPC_CTLR_CLEARIRQ: // 0x06.N.15
|
|
case HPC_CTLR_RESET: // 0x07.N.15
|
|
case HPC_CTLR_IRQSTEER: // 0x08.N.15
|
|
case HPC_CTLR_DISABLEIRQ: // 0x01.N.15
|
|
case HPC_ALLSLOT_ON: // 0x11.N.15
|
|
case HPC_ALLSLOT_OFF: // 0x12.N.15
|
|
rc = 0x0F;
|
|
break;
|
|
|
|
case HPC_SLOT_OFF: // 0x02.Y.0-14
|
|
case HPC_SLOT_ON: // 0x03.Y.0-14
|
|
case HPC_SLOT_ATTNOFF: // 0x04.N.0-14
|
|
case HPC_SLOT_ATTNON: // 0x05.N.0-14
|
|
case HPC_SLOT_BLINKLED: // 0x13.N.0-14
|
|
rc = index;
|
|
break;
|
|
|
|
case HPC_BUS_33CONVMODE:
|
|
case HPC_BUS_66CONVMODE:
|
|
case HPC_BUS_66PCIXMODE:
|
|
case HPC_BUS_100PCIXMODE:
|
|
case HPC_BUS_133PCIXMODE:
|
|
rc = index + WPG_1ST_BUS_INDEX - 1;
|
|
break;
|
|
|
|
default:
|
|
err("hpc_writecmdtoindex - Error invalid cmd[%x]\n", cmd);
|
|
rc = HPC_ERROR;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*----------------------------------------------------------------------
|
|
* Name: hpc_readcmdtoindex()
|
|
*
|
|
* Action: convert a read command to proper index within a controller
|
|
*
|
|
* Return index, HPC_ERROR
|
|
*---------------------------------------------------------------------*/
|
|
static u8 hpc_readcmdtoindex(u8 cmd, u8 index)
|
|
{
|
|
u8 rc;
|
|
|
|
switch (cmd) {
|
|
case READ_CTLRSTATUS:
|
|
rc = 0x0F;
|
|
break;
|
|
case READ_SLOTSTATUS:
|
|
case READ_ALLSTAT:
|
|
rc = index;
|
|
break;
|
|
case READ_EXTSLOTSTATUS:
|
|
rc = index + WPG_1ST_EXTSLOT_INDEX;
|
|
break;
|
|
case READ_BUSSTATUS:
|
|
rc = index + WPG_1ST_BUS_INDEX - 1;
|
|
break;
|
|
case READ_SLOTLATCHLOWREG:
|
|
rc = 0x28;
|
|
break;
|
|
case READ_REVLEVEL:
|
|
rc = 0x25;
|
|
break;
|
|
case READ_HPCOPTIONS:
|
|
rc = 0x27;
|
|
break;
|
|
default:
|
|
rc = HPC_ERROR;
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
/*----------------------------------------------------------------------
|
|
* Name: HPCreadslot()
|
|
*
|
|
* Action: issue a READ command to HPC
|
|
*
|
|
* Input: pslot - cannot be NULL for READ_ALLSTAT
|
|
* pstatus - can be NULL for READ_ALLSTAT
|
|
*
|
|
* Return 0 or error codes
|
|
*---------------------------------------------------------------------*/
|
|
int ibmphp_hpc_readslot(struct slot *pslot, u8 cmd, u8 *pstatus)
|
|
{
|
|
void __iomem *wpg_bbar = NULL;
|
|
struct controller *ctlr_ptr;
|
|
u8 index, status;
|
|
int rc = 0;
|
|
int busindex;
|
|
|
|
debug_polling("%s - Entry pslot[%p] cmd[%x] pstatus[%p]\n", __func__, pslot, cmd, pstatus);
|
|
|
|
if ((pslot == NULL)
|
|
|| ((pstatus == NULL) && (cmd != READ_ALLSTAT) && (cmd != READ_BUSSTATUS))) {
|
|
rc = -EINVAL;
|
|
err("%s - Error invalid pointer, rc[%d]\n", __func__, rc);
|
|
return rc;
|
|
}
|
|
|
|
if (cmd == READ_BUSSTATUS) {
|
|
busindex = ibmphp_get_bus_index(pslot->bus);
|
|
if (busindex < 0) {
|
|
rc = -EINVAL;
|
|
err("%s - Exit Error:invalid bus, rc[%d]\n", __func__, rc);
|
|
return rc;
|
|
} else
|
|
index = (u8) busindex;
|
|
} else
|
|
index = pslot->ctlr_index;
|
|
|
|
index = hpc_readcmdtoindex(cmd, index);
|
|
|
|
if (index == HPC_ERROR) {
|
|
rc = -EINVAL;
|
|
err("%s - Exit Error:invalid index, rc[%d]\n", __func__, rc);
|
|
return rc;
|
|
}
|
|
|
|
ctlr_ptr = pslot->ctrl;
|
|
|
|
get_hpc_access();
|
|
|
|
//--------------------------------------------------------------------
|
|
// map physical address to logical address
|
|
//--------------------------------------------------------------------
|
|
if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
|
|
wpg_bbar = ioremap(ctlr_ptr->u.wpeg_ctlr.wpegbbar, WPG_I2C_IOREMAP_SIZE);
|
|
|
|
//--------------------------------------------------------------------
|
|
// check controller status before reading
|
|
//--------------------------------------------------------------------
|
|
rc = hpc_wait_ctlr_notworking(HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar, &status);
|
|
if (!rc) {
|
|
switch (cmd) {
|
|
case READ_ALLSTAT:
|
|
// update the slot structure
|
|
pslot->ctrl->status = status;
|
|
pslot->status = ctrl_read(ctlr_ptr, wpg_bbar, index);
|
|
rc = hpc_wait_ctlr_notworking(HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar,
|
|
&status);
|
|
if (!rc)
|
|
pslot->ext_status = ctrl_read(ctlr_ptr, wpg_bbar, index + WPG_1ST_EXTSLOT_INDEX);
|
|
|
|
break;
|
|
|
|
case READ_SLOTSTATUS:
|
|
// DO NOT update the slot structure
|
|
*pstatus = ctrl_read(ctlr_ptr, wpg_bbar, index);
|
|
break;
|
|
|
|
case READ_EXTSLOTSTATUS:
|
|
// DO NOT update the slot structure
|
|
*pstatus = ctrl_read(ctlr_ptr, wpg_bbar, index);
|
|
break;
|
|
|
|
case READ_CTLRSTATUS:
|
|
// DO NOT update the slot structure
|
|
*pstatus = status;
|
|
break;
|
|
|
|
case READ_BUSSTATUS:
|
|
pslot->busstatus = ctrl_read(ctlr_ptr, wpg_bbar, index);
|
|
break;
|
|
case READ_REVLEVEL:
|
|
*pstatus = ctrl_read(ctlr_ptr, wpg_bbar, index);
|
|
break;
|
|
case READ_HPCOPTIONS:
|
|
*pstatus = ctrl_read(ctlr_ptr, wpg_bbar, index);
|
|
break;
|
|
case READ_SLOTLATCHLOWREG:
|
|
// DO NOT update the slot structure
|
|
*pstatus = ctrl_read(ctlr_ptr, wpg_bbar, index);
|
|
break;
|
|
|
|
// Not used
|
|
case READ_ALLSLOT:
|
|
list_for_each_entry(pslot, &ibmphp_slot_head,
|
|
ibm_slot_list) {
|
|
index = pslot->ctlr_index;
|
|
rc = hpc_wait_ctlr_notworking(HPC_CTLR_WORKING_TOUT, ctlr_ptr,
|
|
wpg_bbar, &status);
|
|
if (!rc) {
|
|
pslot->status = ctrl_read(ctlr_ptr, wpg_bbar, index);
|
|
rc = hpc_wait_ctlr_notworking(HPC_CTLR_WORKING_TOUT,
|
|
ctlr_ptr, wpg_bbar, &status);
|
|
if (!rc)
|
|
pslot->ext_status =
|
|
ctrl_read(ctlr_ptr, wpg_bbar,
|
|
index + WPG_1ST_EXTSLOT_INDEX);
|
|
} else {
|
|
err("%s - Error ctrl_read failed\n", __func__);
|
|
rc = -EINVAL;
|
|
break;
|
|
}
|
|
}
|
|
break;
|
|
default:
|
|
rc = -EINVAL;
|
|
break;
|
|
}
|
|
}
|
|
//--------------------------------------------------------------------
|
|
// cleanup
|
|
//--------------------------------------------------------------------
|
|
|
|
// remove physical to logical address mapping
|
|
if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
|
|
iounmap(wpg_bbar);
|
|
|
|
free_hpc_access();
|
|
|
|
debug_polling("%s - Exit rc[%d]\n", __func__, rc);
|
|
return rc;
|
|
}
|
|
|
|
/*----------------------------------------------------------------------
|
|
* Name: ibmphp_hpc_writeslot()
|
|
*
|
|
* Action: issue a WRITE command to HPC
|
|
*---------------------------------------------------------------------*/
|
|
int ibmphp_hpc_writeslot(struct slot *pslot, u8 cmd)
|
|
{
|
|
void __iomem *wpg_bbar = NULL;
|
|
struct controller *ctlr_ptr;
|
|
u8 index, status;
|
|
int busindex;
|
|
u8 done;
|
|
int rc = 0;
|
|
int timeout;
|
|
|
|
debug_polling("%s - Entry pslot[%p] cmd[%x]\n", __func__, pslot, cmd);
|
|
if (pslot == NULL) {
|
|
rc = -EINVAL;
|
|
err("%s - Error Exit rc[%d]\n", __func__, rc);
|
|
return rc;
|
|
}
|
|
|
|
if ((cmd == HPC_BUS_33CONVMODE) || (cmd == HPC_BUS_66CONVMODE) ||
|
|
(cmd == HPC_BUS_66PCIXMODE) || (cmd == HPC_BUS_100PCIXMODE) ||
|
|
(cmd == HPC_BUS_133PCIXMODE)) {
|
|
busindex = ibmphp_get_bus_index(pslot->bus);
|
|
if (busindex < 0) {
|
|
rc = -EINVAL;
|
|
err("%s - Exit Error:invalid bus, rc[%d]\n", __func__, rc);
|
|
return rc;
|
|
} else
|
|
index = (u8) busindex;
|
|
} else
|
|
index = pslot->ctlr_index;
|
|
|
|
index = hpc_writecmdtoindex(cmd, index);
|
|
|
|
if (index == HPC_ERROR) {
|
|
rc = -EINVAL;
|
|
err("%s - Error Exit rc[%d]\n", __func__, rc);
|
|
return rc;
|
|
}
|
|
|
|
ctlr_ptr = pslot->ctrl;
|
|
|
|
get_hpc_access();
|
|
|
|
//--------------------------------------------------------------------
|
|
// map physical address to logical address
|
|
//--------------------------------------------------------------------
|
|
if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4)) {
|
|
wpg_bbar = ioremap(ctlr_ptr->u.wpeg_ctlr.wpegbbar, WPG_I2C_IOREMAP_SIZE);
|
|
|
|
debug("%s - ctlr id[%x] physical[%lx] logical[%lx] i2c[%x]\n", __func__,
|
|
ctlr_ptr->ctlr_id, (ulong) (ctlr_ptr->u.wpeg_ctlr.wpegbbar), (ulong) wpg_bbar,
|
|
ctlr_ptr->u.wpeg_ctlr.i2c_addr);
|
|
}
|
|
//--------------------------------------------------------------------
|
|
// check controller status before writing
|
|
//--------------------------------------------------------------------
|
|
rc = hpc_wait_ctlr_notworking(HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar, &status);
|
|
if (!rc) {
|
|
|
|
ctrl_write(ctlr_ptr, wpg_bbar, index, cmd);
|
|
|
|
//--------------------------------------------------------------------
|
|
// check controller is still not working on the command
|
|
//--------------------------------------------------------------------
|
|
timeout = CMD_COMPLETE_TOUT_SEC;
|
|
done = 0;
|
|
while (!done) {
|
|
rc = hpc_wait_ctlr_notworking(HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar,
|
|
&status);
|
|
if (!rc) {
|
|
if (NEEDTOCHECK_CMDSTATUS(cmd)) {
|
|
if (CTLR_FINISHED(status) == HPC_CTLR_FINISHED_YES)
|
|
done = 1;
|
|
} else
|
|
done = 1;
|
|
}
|
|
if (!done) {
|
|
msleep(1000);
|
|
if (timeout < 1) {
|
|
done = 1;
|
|
err("%s - Error command complete timeout\n", __func__);
|
|
rc = -EFAULT;
|
|
} else
|
|
timeout--;
|
|
}
|
|
}
|
|
ctlr_ptr->status = status;
|
|
}
|
|
// cleanup
|
|
|
|
// remove physical to logical address mapping
|
|
if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
|
|
iounmap(wpg_bbar);
|
|
free_hpc_access();
|
|
|
|
debug_polling("%s - Exit rc[%d]\n", __func__, rc);
|
|
return rc;
|
|
}
|
|
|
|
/*----------------------------------------------------------------------
|
|
* Name: get_hpc_access()
|
|
*
|
|
* Action: make sure only one process can access HPC at one time
|
|
*---------------------------------------------------------------------*/
|
|
static void get_hpc_access(void)
|
|
{
|
|
mutex_lock(&sem_hpcaccess);
|
|
}
|
|
|
|
/*----------------------------------------------------------------------
|
|
* Name: free_hpc_access()
|
|
*---------------------------------------------------------------------*/
|
|
void free_hpc_access(void)
|
|
{
|
|
mutex_unlock(&sem_hpcaccess);
|
|
}
|
|
|
|
/*----------------------------------------------------------------------
|
|
* Name: ibmphp_lock_operations()
|
|
*
|
|
* Action: make sure only one process can change the data structure
|
|
*---------------------------------------------------------------------*/
|
|
void ibmphp_lock_operations(void)
|
|
{
|
|
down(&semOperations);
|
|
to_debug = 1;
|
|
}
|
|
|
|
/*----------------------------------------------------------------------
|
|
* Name: ibmphp_unlock_operations()
|
|
*---------------------------------------------------------------------*/
|
|
void ibmphp_unlock_operations(void)
|
|
{
|
|
debug("%s - Entry\n", __func__);
|
|
up(&semOperations);
|
|
to_debug = 0;
|
|
debug("%s - Exit\n", __func__);
|
|
}
|
|
|
|
/*----------------------------------------------------------------------
|
|
* Name: poll_hpc()
|
|
*---------------------------------------------------------------------*/
|
|
#define POLL_LATCH_REGISTER 0
|
|
#define POLL_SLOTS 1
|
|
#define POLL_SLEEP 2
|
|
static int poll_hpc(void *data)
|
|
{
|
|
struct slot myslot;
|
|
struct slot *pslot = NULL;
|
|
int rc;
|
|
int poll_state = POLL_LATCH_REGISTER;
|
|
u8 oldlatchlow = 0x00;
|
|
u8 curlatchlow = 0x00;
|
|
int poll_count = 0;
|
|
u8 ctrl_count = 0x00;
|
|
|
|
debug("%s - Entry\n", __func__);
|
|
|
|
while (!kthread_should_stop()) {
|
|
/* try to get the lock to do some kind of hardware access */
|
|
down(&semOperations);
|
|
|
|
switch (poll_state) {
|
|
case POLL_LATCH_REGISTER:
|
|
oldlatchlow = curlatchlow;
|
|
ctrl_count = 0x00;
|
|
list_for_each_entry(pslot, &ibmphp_slot_head,
|
|
ibm_slot_list) {
|
|
if (ctrl_count >= ibmphp_get_total_controllers())
|
|
break;
|
|
if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
|
|
ctrl_count++;
|
|
if (READ_SLOT_LATCH(pslot->ctrl)) {
|
|
rc = ibmphp_hpc_readslot(pslot,
|
|
READ_SLOTLATCHLOWREG,
|
|
&curlatchlow);
|
|
if (oldlatchlow != curlatchlow)
|
|
process_changeinlatch(oldlatchlow,
|
|
curlatchlow,
|
|
pslot->ctrl);
|
|
}
|
|
}
|
|
}
|
|
++poll_count;
|
|
poll_state = POLL_SLEEP;
|
|
break;
|
|
case POLL_SLOTS:
|
|
list_for_each_entry(pslot, &ibmphp_slot_head,
|
|
ibm_slot_list) {
|
|
// make a copy of the old status
|
|
memcpy((void *) &myslot, (void *) pslot,
|
|
sizeof(struct slot));
|
|
rc = ibmphp_hpc_readslot(pslot, READ_ALLSTAT, NULL);
|
|
if ((myslot.status != pslot->status)
|
|
|| (myslot.ext_status != pslot->ext_status))
|
|
process_changeinstatus(pslot, &myslot);
|
|
}
|
|
ctrl_count = 0x00;
|
|
list_for_each_entry(pslot, &ibmphp_slot_head,
|
|
ibm_slot_list) {
|
|
if (ctrl_count >= ibmphp_get_total_controllers())
|
|
break;
|
|
if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
|
|
ctrl_count++;
|
|
if (READ_SLOT_LATCH(pslot->ctrl))
|
|
rc = ibmphp_hpc_readslot(pslot,
|
|
READ_SLOTLATCHLOWREG,
|
|
&curlatchlow);
|
|
}
|
|
}
|
|
++poll_count;
|
|
poll_state = POLL_SLEEP;
|
|
break;
|
|
case POLL_SLEEP:
|
|
/* don't sleep with a lock on the hardware */
|
|
up(&semOperations);
|
|
msleep(POLL_INTERVAL_SEC * 1000);
|
|
|
|
if (kthread_should_stop())
|
|
goto out_sleep;
|
|
|
|
down(&semOperations);
|
|
|
|
if (poll_count >= POLL_LATCH_CNT) {
|
|
poll_count = 0;
|
|
poll_state = POLL_SLOTS;
|
|
} else
|
|
poll_state = POLL_LATCH_REGISTER;
|
|
break;
|
|
}
|
|
/* give up the hardware semaphore */
|
|
up(&semOperations);
|
|
/* sleep for a short time just for good measure */
|
|
out_sleep:
|
|
msleep(100);
|
|
}
|
|
up(&sem_exit);
|
|
debug("%s - Exit\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*----------------------------------------------------------------------
|
|
* Name: process_changeinstatus
|
|
*
|
|
* Action: compare old and new slot status, process the change in status
|
|
*
|
|
* Input: pointer to slot struct, old slot struct
|
|
*
|
|
* Return 0 or error codes
|
|
* Value:
|
|
*
|
|
* Side
|
|
* Effects: None.
|
|
*
|
|
* Notes:
|
|
*---------------------------------------------------------------------*/
|
|
static int process_changeinstatus(struct slot *pslot, struct slot *poldslot)
|
|
{
|
|
u8 status;
|
|
int rc = 0;
|
|
u8 disable = 0;
|
|
u8 update = 0;
|
|
|
|
debug("process_changeinstatus - Entry pslot[%p], poldslot[%p]\n", pslot, poldslot);
|
|
|
|
// bit 0 - HPC_SLOT_POWER
|
|
if ((pslot->status & 0x01) != (poldslot->status & 0x01))
|
|
update = 1;
|
|
|
|
// bit 1 - HPC_SLOT_CONNECT
|
|
// ignore
|
|
|
|
// bit 2 - HPC_SLOT_ATTN
|
|
if ((pslot->status & 0x04) != (poldslot->status & 0x04))
|
|
update = 1;
|
|
|
|
// bit 3 - HPC_SLOT_PRSNT2
|
|
// bit 4 - HPC_SLOT_PRSNT1
|
|
if (((pslot->status & 0x08) != (poldslot->status & 0x08))
|
|
|| ((pslot->status & 0x10) != (poldslot->status & 0x10)))
|
|
update = 1;
|
|
|
|
// bit 5 - HPC_SLOT_PWRGD
|
|
if ((pslot->status & 0x20) != (poldslot->status & 0x20))
|
|
// OFF -> ON: ignore, ON -> OFF: disable slot
|
|
if ((poldslot->status & 0x20) && (SLOT_CONNECT(poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT(poldslot->status)))
|
|
disable = 1;
|
|
|
|
// bit 6 - HPC_SLOT_BUS_SPEED
|
|
// ignore
|
|
|
|
// bit 7 - HPC_SLOT_LATCH
|
|
if ((pslot->status & 0x80) != (poldslot->status & 0x80)) {
|
|
update = 1;
|
|
// OPEN -> CLOSE
|
|
if (pslot->status & 0x80) {
|
|
if (SLOT_PWRGD(pslot->status)) {
|
|
// power goes on and off after closing latch
|
|
// check again to make sure power is still ON
|
|
msleep(1000);
|
|
rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS, &status);
|
|
if (SLOT_PWRGD(status))
|
|
update = 1;
|
|
else // overwrite power in pslot to OFF
|
|
pslot->status &= ~HPC_SLOT_POWER;
|
|
}
|
|
}
|
|
// CLOSE -> OPEN
|
|
else if ((SLOT_PWRGD(poldslot->status) == HPC_SLOT_PWRGD_GOOD)
|
|
&& (SLOT_CONNECT(poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT(poldslot->status))) {
|
|
disable = 1;
|
|
}
|
|
// else - ignore
|
|
}
|
|
// bit 4 - HPC_SLOT_BLINK_ATTN
|
|
if ((pslot->ext_status & 0x08) != (poldslot->ext_status & 0x08))
|
|
update = 1;
|
|
|
|
if (disable) {
|
|
debug("process_changeinstatus - disable slot\n");
|
|
pslot->flag = 0;
|
|
rc = ibmphp_do_disable_slot(pslot);
|
|
}
|
|
|
|
if (update || disable)
|
|
ibmphp_update_slot_info(pslot);
|
|
|
|
debug("%s - Exit rc[%d] disable[%x] update[%x]\n", __func__, rc, disable, update);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*----------------------------------------------------------------------
|
|
* Name: process_changeinlatch
|
|
*
|
|
* Action: compare old and new latch reg status, process the change
|
|
*
|
|
* Input: old and current latch register status
|
|
*
|
|
* Return 0 or error codes
|
|
* Value:
|
|
*---------------------------------------------------------------------*/
|
|
static int process_changeinlatch(u8 old, u8 new, struct controller *ctrl)
|
|
{
|
|
struct slot myslot, *pslot;
|
|
u8 i;
|
|
u8 mask;
|
|
int rc = 0;
|
|
|
|
debug("%s - Entry old[%x], new[%x]\n", __func__, old, new);
|
|
// bit 0 reserved, 0 is LSB, check bit 1-6 for 6 slots
|
|
|
|
for (i = ctrl->starting_slot_num; i <= ctrl->ending_slot_num; i++) {
|
|
mask = 0x01 << i;
|
|
if ((mask & old) != (mask & new)) {
|
|
pslot = ibmphp_get_slot_from_physical_num(i);
|
|
if (pslot) {
|
|
memcpy((void *) &myslot, (void *) pslot, sizeof(struct slot));
|
|
rc = ibmphp_hpc_readslot(pslot, READ_ALLSTAT, NULL);
|
|
debug("%s - call process_changeinstatus for slot[%d]\n", __func__, i);
|
|
process_changeinstatus(pslot, &myslot);
|
|
} else {
|
|
rc = -EINVAL;
|
|
err("%s - Error bad pointer for slot[%d]\n", __func__, i);
|
|
}
|
|
}
|
|
}
|
|
debug("%s - Exit rc[%d]\n", __func__, rc);
|
|
return rc;
|
|
}
|
|
|
|
/*----------------------------------------------------------------------
|
|
* Name: ibmphp_hpc_start_poll_thread
|
|
*
|
|
* Action: start polling thread
|
|
*---------------------------------------------------------------------*/
|
|
int __init ibmphp_hpc_start_poll_thread(void)
|
|
{
|
|
debug("%s - Entry\n", __func__);
|
|
|
|
ibmphp_poll_thread = kthread_run(poll_hpc, NULL, "hpc_poll");
|
|
if (IS_ERR(ibmphp_poll_thread)) {
|
|
err("%s - Error, thread not started\n", __func__);
|
|
return PTR_ERR(ibmphp_poll_thread);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*----------------------------------------------------------------------
|
|
* Name: ibmphp_hpc_stop_poll_thread
|
|
*
|
|
* Action: stop polling thread and cleanup
|
|
*---------------------------------------------------------------------*/
|
|
void __exit ibmphp_hpc_stop_poll_thread(void)
|
|
{
|
|
debug("%s - Entry\n", __func__);
|
|
|
|
kthread_stop(ibmphp_poll_thread);
|
|
debug("before locking operations\n");
|
|
ibmphp_lock_operations();
|
|
debug("after locking operations\n");
|
|
|
|
// wait for poll thread to exit
|
|
debug("before sem_exit down\n");
|
|
down(&sem_exit);
|
|
debug("after sem_exit down\n");
|
|
|
|
// cleanup
|
|
debug("before free_hpc_access\n");
|
|
free_hpc_access();
|
|
debug("after free_hpc_access\n");
|
|
ibmphp_unlock_operations();
|
|
debug("after unlock operations\n");
|
|
up(&sem_exit);
|
|
debug("after sem exit up\n");
|
|
|
|
debug("%s - Exit\n", __func__);
|
|
}
|
|
|
|
/*----------------------------------------------------------------------
|
|
* Name: hpc_wait_ctlr_notworking
|
|
*
|
|
* Action: wait until the controller is in a not working state
|
|
*
|
|
* Return 0, HPC_ERROR
|
|
* Value:
|
|
*---------------------------------------------------------------------*/
|
|
static int hpc_wait_ctlr_notworking(int timeout, struct controller *ctlr_ptr, void __iomem *wpg_bbar,
|
|
u8 *pstatus)
|
|
{
|
|
int rc = 0;
|
|
u8 done = 0;
|
|
|
|
debug_polling("hpc_wait_ctlr_notworking - Entry timeout[%d]\n", timeout);
|
|
|
|
while (!done) {
|
|
*pstatus = ctrl_read(ctlr_ptr, wpg_bbar, WPG_CTLR_INDEX);
|
|
if (*pstatus == HPC_ERROR) {
|
|
rc = HPC_ERROR;
|
|
done = 1;
|
|
}
|
|
if (CTLR_WORKING(*pstatus) == HPC_CTLR_WORKING_NO)
|
|
done = 1;
|
|
if (!done) {
|
|
msleep(1000);
|
|
if (timeout < 1) {
|
|
done = 1;
|
|
err("HPCreadslot - Error ctlr timeout\n");
|
|
rc = HPC_ERROR;
|
|
} else
|
|
timeout--;
|
|
}
|
|
}
|
|
debug_polling("hpc_wait_ctlr_notworking - Exit rc[%x] status[%x]\n", rc, *pstatus);
|
|
return rc;
|
|
}
|