WSL2-Linux-Kernel/drivers/leds/leds-lt3593.c

203 строки
5.1 KiB
C

// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2009,2018 Daniel Mack <daniel@zonque.org>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/of.h>
#include <uapi/linux/uleds.h>
struct lt3593_led_data {
char name[LED_MAX_NAME_SIZE];
struct led_classdev cdev;
struct gpio_desc *gpiod;
};
static int lt3593_led_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
struct lt3593_led_data *led_dat =
container_of(led_cdev, struct lt3593_led_data, cdev);
int pulses;
/*
* The LT3593 resets its internal current level register to the maximum
* level on the first falling edge on the control pin. Each following
* falling edge decreases the current level by 625uA. Up to 32 pulses
* can be sent, so the maximum power reduction is 20mA.
* After a timeout of 128us, the value is taken from the register and
* applied is to the output driver.
*/
if (value == 0) {
gpiod_set_value_cansleep(led_dat->gpiod, 0);
return 0;
}
pulses = 32 - (value * 32) / 255;
if (pulses == 0) {
gpiod_set_value_cansleep(led_dat->gpiod, 0);
mdelay(1);
gpiod_set_value_cansleep(led_dat->gpiod, 1);
return 0;
}
gpiod_set_value_cansleep(led_dat->gpiod, 1);
while (pulses--) {
gpiod_set_value_cansleep(led_dat->gpiod, 0);
udelay(1);
gpiod_set_value_cansleep(led_dat->gpiod, 1);
udelay(1);
}
return 0;
}
static struct lt3593_led_data *lt3593_led_probe_pdata(struct device *dev)
{
struct gpio_led_platform_data *pdata = dev_get_platdata(dev);
const struct gpio_led *template = &pdata->leds[0];
struct lt3593_led_data *led_data;
int ret, state;
if (pdata->num_leds != 1)
return ERR_PTR(-EINVAL);
led_data = devm_kzalloc(dev, sizeof(*led_data), GFP_KERNEL);
if (!led_data)
return ERR_PTR(-ENOMEM);
led_data->cdev.name = template->name;
led_data->cdev.default_trigger = template->default_trigger;
led_data->cdev.brightness_set_blocking = lt3593_led_set;
state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
led_data->cdev.brightness = state ? LED_FULL : LED_OFF;
if (!template->retain_state_suspended)
led_data->cdev.flags |= LED_CORE_SUSPENDRESUME;
ret = devm_gpio_request_one(dev, template->gpio, state ?
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
template->name);
if (ret < 0)
return ERR_PTR(ret);
led_data->gpiod = gpio_to_desc(template->gpio);
if (!led_data->gpiod)
return ERR_PTR(-EPROBE_DEFER);
ret = devm_led_classdev_register(dev, &led_data->cdev);
if (ret < 0)
return ERR_PTR(ret);
dev_info(dev, "registered LT3593 LED '%s' at GPIO %d\n",
template->name, template->gpio);
return led_data;
}
static int lt3593_led_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct lt3593_led_data *led_data;
struct fwnode_handle *child;
int ret, state = LEDS_GPIO_DEFSTATE_OFF;
enum gpiod_flags flags = GPIOD_OUT_LOW;
const char *tmp;
if (dev_get_platdata(dev)) {
led_data = lt3593_led_probe_pdata(dev);
if (IS_ERR(led_data))
return PTR_ERR(led_data);
goto out;
}
if (!dev->of_node)
return -ENODEV;
led_data = devm_kzalloc(dev, sizeof(*led_data), GFP_KERNEL);
if (!led_data)
return -ENOMEM;
if (device_get_child_node_count(dev) != 1) {
dev_err(dev, "Device must have exactly one LED sub-node.");
return -EINVAL;
}
led_data->gpiod = devm_gpiod_get(dev, "lltc,ctrl", 0);
if (IS_ERR(led_data->gpiod))
return PTR_ERR(led_data->gpiod);
child = device_get_next_child_node(dev, NULL);
ret = fwnode_property_read_string(child, "label", &tmp);
if (ret < 0)
snprintf(led_data->name, sizeof(led_data->name),
"lt3593::");
else
snprintf(led_data->name, sizeof(led_data->name),
"lt3593:%s", tmp);
fwnode_property_read_string(child, "linux,default-trigger",
&led_data->cdev.default_trigger);
if (!fwnode_property_read_string(child, "default-state", &tmp)) {
if (!strcmp(tmp, "keep")) {
state = LEDS_GPIO_DEFSTATE_KEEP;
flags = GPIOD_ASIS;
} else if (!strcmp(tmp, "on")) {
state = LEDS_GPIO_DEFSTATE_ON;
flags = GPIOD_OUT_HIGH;
}
}
led_data->cdev.name = led_data->name;
led_data->cdev.brightness_set_blocking = lt3593_led_set;
led_data->cdev.brightness = state ? LED_FULL : LED_OFF;
ret = devm_led_classdev_register(dev, &led_data->cdev);
if (ret < 0) {
fwnode_handle_put(child);
return ret;
}
led_data->cdev.dev->of_node = dev->of_node;
out:
platform_set_drvdata(pdev, led_data);
return 0;
}
#ifdef CONFIG_OF
static const struct of_device_id of_lt3593_leds_match[] = {
{ .compatible = "lltc,lt3593", },
{},
};
MODULE_DEVICE_TABLE(of, of_lt3593_leds_match);
#endif
static struct platform_driver lt3593_led_driver = {
.probe = lt3593_led_probe,
.driver = {
.name = "leds-lt3593",
.of_match_table = of_match_ptr(of_lt3593_leds_match),
},
};
module_platform_driver(lt3593_led_driver);
MODULE_AUTHOR("Daniel Mack <daniel@zonque.org>");
MODULE_DESCRIPTION("LED driver for LT3593 controllers");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:leds-lt3593");