621 строка
16 KiB
C
621 строка
16 KiB
C
/*
|
|
* Wacom protocol 4 serial tablet driver
|
|
*
|
|
* Copyright 2014 Hans de Goede <hdegoede@redhat.com>
|
|
* Copyright 2011-2012 Julian Squires <julian@cipht.net>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version of 2 of the License, or (at your
|
|
* option) any later version. See the file COPYING in the main directory of
|
|
* this archive for more details.
|
|
*
|
|
* Many thanks to Bill Seremetis, without whom PenPartner support
|
|
* would not have been possible. Thanks to Patrick Mahoney.
|
|
*
|
|
* This driver was developed with reference to much code written by others,
|
|
* particularly:
|
|
* - elo, gunze drivers by Vojtech Pavlik <vojtech@ucw.cz>;
|
|
* - wacom_w8001 driver by Jaya Kumar <jayakumar.lkml@gmail.com>;
|
|
* - the USB wacom input driver, credited to many people
|
|
* (see drivers/input/tablet/wacom.h);
|
|
* - new and old versions of linuxwacom / xf86-input-wacom credited to
|
|
* Frederic Lepied, France. <Lepied@XFree86.org> and
|
|
* Ping Cheng, Wacom. <pingc@wacom.com>;
|
|
* - and xf86wacom.c (a presumably ancient version of the linuxwacom code),
|
|
* by Frederic Lepied and Raph Levien <raph@gtk.org>.
|
|
*
|
|
* To do:
|
|
* - support pad buttons; (requires access to a model with pad buttons)
|
|
* - support (protocol 4-style) tilt (requires access to a > 1.4 rom model)
|
|
*/
|
|
|
|
/*
|
|
* Wacom serial protocol 4 documentation taken from linuxwacom-0.9.9 code,
|
|
* protocol 4 uses 7 or 9 byte of data in the following format:
|
|
*
|
|
* Byte 1
|
|
* bit 7 Sync bit always 1
|
|
* bit 6 Pointing device detected
|
|
* bit 5 Cursor = 0 / Stylus = 1
|
|
* bit 4 Reserved
|
|
* bit 3 1 if a button on the pointing device has been pressed
|
|
* bit 2 P0 (optional)
|
|
* bit 1 X15
|
|
* bit 0 X14
|
|
*
|
|
* Byte 2
|
|
* bit 7 Always 0
|
|
* bits 6-0 = X13 - X7
|
|
*
|
|
* Byte 3
|
|
* bit 7 Always 0
|
|
* bits 6-0 = X6 - X0
|
|
*
|
|
* Byte 4
|
|
* bit 7 Always 0
|
|
* bit 6 B3
|
|
* bit 5 B2
|
|
* bit 4 B1
|
|
* bit 3 B0
|
|
* bit 2 P1 (optional)
|
|
* bit 1 Y15
|
|
* bit 0 Y14
|
|
*
|
|
* Byte 5
|
|
* bit 7 Always 0
|
|
* bits 6-0 = Y13 - Y7
|
|
*
|
|
* Byte 6
|
|
* bit 7 Always 0
|
|
* bits 6-0 = Y6 - Y0
|
|
*
|
|
* Byte 7
|
|
* bit 7 Always 0
|
|
* bit 6 Sign of pressure data; or wheel-rel for cursor tool
|
|
* bit 5 P7; or REL1 for cursor tool
|
|
* bit 4 P6; or REL0 for cursor tool
|
|
* bit 3 P5
|
|
* bit 2 P4
|
|
* bit 1 P3
|
|
* bit 0 P2
|
|
*
|
|
* byte 8 and 9 are optional and present only
|
|
* in tilt mode.
|
|
*
|
|
* Byte 8
|
|
* bit 7 Always 0
|
|
* bit 6 Sign of tilt X
|
|
* bit 5 Xt6
|
|
* bit 4 Xt5
|
|
* bit 3 Xt4
|
|
* bit 2 Xt3
|
|
* bit 1 Xt2
|
|
* bit 0 Xt1
|
|
*
|
|
* Byte 9
|
|
* bit 7 Always 0
|
|
* bit 6 Sign of tilt Y
|
|
* bit 5 Yt6
|
|
* bit 4 Yt5
|
|
* bit 3 Yt4
|
|
* bit 2 Yt3
|
|
* bit 1 Yt2
|
|
* bit 0 Yt1
|
|
*/
|
|
|
|
#include <linux/completion.h>
|
|
#include <linux/init.h>
|
|
#include <linux/input.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/serio.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
|
|
MODULE_AUTHOR("Julian Squires <julian@cipht.net>, Hans de Goede <hdegoede@redhat.com>");
|
|
MODULE_DESCRIPTION("Wacom protocol 4 serial tablet driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
#define REQUEST_MODEL_AND_ROM_VERSION "~#"
|
|
#define REQUEST_MAX_COORDINATES "~C\r"
|
|
#define REQUEST_CONFIGURATION_STRING "~R\r"
|
|
#define REQUEST_RESET_TO_PROTOCOL_IV "\r#"
|
|
/*
|
|
* Note: sending "\r$\r" causes at least the Digitizer II to send
|
|
* packets in ASCII instead of binary. "\r#" seems to undo that.
|
|
*/
|
|
|
|
#define COMMAND_START_SENDING_PACKETS "ST\r"
|
|
#define COMMAND_STOP_SENDING_PACKETS "SP\r"
|
|
#define COMMAND_MULTI_MODE_INPUT "MU1\r"
|
|
#define COMMAND_ORIGIN_IN_UPPER_LEFT "OC1\r"
|
|
#define COMMAND_ENABLE_ALL_MACRO_BUTTONS "~M0\r"
|
|
#define COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS "~M1\r"
|
|
#define COMMAND_TRANSMIT_AT_MAX_RATE "IT0\r"
|
|
#define COMMAND_DISABLE_INCREMENTAL_MODE "IN0\r"
|
|
#define COMMAND_ENABLE_CONTINUOUS_MODE "SR\r"
|
|
#define COMMAND_ENABLE_PRESSURE_MODE "PH1\r"
|
|
#define COMMAND_Z_FILTER "ZF1\r"
|
|
|
|
/* Note that this is a protocol 4 packet without tilt information. */
|
|
#define PACKET_LENGTH 7
|
|
#define DATA_SIZE 32
|
|
|
|
/* flags */
|
|
#define F_COVERS_SCREEN 0x01
|
|
#define F_HAS_STYLUS2 0x02
|
|
#define F_HAS_SCROLLWHEEL 0x04
|
|
|
|
/* device IDs */
|
|
#define STYLUS_DEVICE_ID 0x02
|
|
#define CURSOR_DEVICE_ID 0x06
|
|
#define ERASER_DEVICE_ID 0x0A
|
|
|
|
enum { STYLUS = 1, ERASER, CURSOR };
|
|
|
|
static const struct {
|
|
int device_id;
|
|
int input_id;
|
|
} tools[] = {
|
|
{ 0, 0 },
|
|
{ STYLUS_DEVICE_ID, BTN_TOOL_PEN },
|
|
{ ERASER_DEVICE_ID, BTN_TOOL_RUBBER },
|
|
{ CURSOR_DEVICE_ID, BTN_TOOL_MOUSE },
|
|
};
|
|
|
|
struct wacom {
|
|
struct input_dev *dev;
|
|
struct completion cmd_done;
|
|
int result;
|
|
u8 expect;
|
|
u8 eraser_mask;
|
|
unsigned int extra_z_bits;
|
|
unsigned int flags;
|
|
unsigned int res_x, res_y;
|
|
unsigned int max_x, max_y;
|
|
unsigned int tool;
|
|
unsigned int idx;
|
|
u8 data[DATA_SIZE];
|
|
char phys[32];
|
|
};
|
|
|
|
enum {
|
|
MODEL_CINTIQ = 0x504C, /* PL */
|
|
MODEL_CINTIQ2 = 0x4454, /* DT */
|
|
MODEL_DIGITIZER_II = 0x5544, /* UD */
|
|
MODEL_GRAPHIRE = 0x4554, /* ET */
|
|
MODEL_PENPARTNER = 0x4354, /* CT */
|
|
};
|
|
|
|
static void wacom_handle_model_response(struct wacom *wacom)
|
|
{
|
|
int major_v, minor_v, r = 0;
|
|
char *p;
|
|
|
|
p = strrchr(wacom->data, 'V');
|
|
if (p)
|
|
r = sscanf(p + 1, "%u.%u", &major_v, &minor_v);
|
|
if (r != 2)
|
|
major_v = minor_v = 0;
|
|
|
|
switch (wacom->data[2] << 8 | wacom->data[3]) {
|
|
case MODEL_CINTIQ: /* UNTESTED */
|
|
case MODEL_CINTIQ2:
|
|
if ((wacom->data[2] << 8 | wacom->data[3]) == MODEL_CINTIQ) {
|
|
wacom->dev->name = "Wacom Cintiq";
|
|
wacom->dev->id.version = MODEL_CINTIQ;
|
|
} else {
|
|
wacom->dev->name = "Wacom Cintiq II";
|
|
wacom->dev->id.version = MODEL_CINTIQ2;
|
|
}
|
|
wacom->res_x = 508;
|
|
wacom->res_y = 508;
|
|
|
|
switch (wacom->data[5] << 8 | wacom->data[6]) {
|
|
case 0x3731: /* PL-710 */
|
|
wacom->res_x = 2540;
|
|
wacom->res_y = 2540;
|
|
/* fall through */
|
|
case 0x3535: /* PL-550 */
|
|
case 0x3830: /* PL-800 */
|
|
wacom->extra_z_bits = 2;
|
|
}
|
|
|
|
wacom->flags = F_COVERS_SCREEN;
|
|
break;
|
|
|
|
case MODEL_PENPARTNER:
|
|
wacom->dev->name = "Wacom Penpartner";
|
|
wacom->dev->id.version = MODEL_PENPARTNER;
|
|
wacom->res_x = 1000;
|
|
wacom->res_y = 1000;
|
|
break;
|
|
|
|
case MODEL_GRAPHIRE:
|
|
wacom->dev->name = "Wacom Graphire";
|
|
wacom->dev->id.version = MODEL_GRAPHIRE;
|
|
wacom->res_x = 1016;
|
|
wacom->res_y = 1016;
|
|
wacom->max_x = 5103;
|
|
wacom->max_y = 3711;
|
|
wacom->extra_z_bits = 2;
|
|
wacom->eraser_mask = 0x08;
|
|
wacom->flags = F_HAS_STYLUS2 | F_HAS_SCROLLWHEEL;
|
|
break;
|
|
|
|
case MODEL_DIGITIZER_II:
|
|
wacom->dev->name = "Wacom Digitizer II";
|
|
wacom->dev->id.version = MODEL_DIGITIZER_II;
|
|
if (major_v == 1 && minor_v <= 2)
|
|
wacom->extra_z_bits = 0; /* UNTESTED */
|
|
break;
|
|
|
|
default:
|
|
dev_err(&wacom->dev->dev, "Unsupported Wacom model %s\n",
|
|
wacom->data);
|
|
wacom->result = -ENODEV;
|
|
return;
|
|
}
|
|
|
|
dev_info(&wacom->dev->dev, "%s tablet, version %u.%u\n",
|
|
wacom->dev->name, major_v, minor_v);
|
|
}
|
|
|
|
static void wacom_handle_configuration_response(struct wacom *wacom)
|
|
{
|
|
int r, skip;
|
|
|
|
dev_dbg(&wacom->dev->dev, "Configuration string: %s\n", wacom->data);
|
|
r = sscanf(wacom->data, "~R%x,%u,%u,%u,%u", &skip, &skip, &skip,
|
|
&wacom->res_x, &wacom->res_y);
|
|
if (r != 5)
|
|
dev_warn(&wacom->dev->dev, "could not get resolution\n");
|
|
}
|
|
|
|
static void wacom_handle_coordinates_response(struct wacom *wacom)
|
|
{
|
|
int r;
|
|
|
|
dev_dbg(&wacom->dev->dev, "Coordinates string: %s\n", wacom->data);
|
|
r = sscanf(wacom->data, "~C%u,%u", &wacom->max_x, &wacom->max_y);
|
|
if (r != 2)
|
|
dev_warn(&wacom->dev->dev, "could not get max coordinates\n");
|
|
}
|
|
|
|
static void wacom_handle_response(struct wacom *wacom)
|
|
{
|
|
if (wacom->data[0] != '~' || wacom->data[1] != wacom->expect) {
|
|
dev_err(&wacom->dev->dev,
|
|
"Wacom got an unexpected response: %s\n", wacom->data);
|
|
wacom->result = -EIO;
|
|
} else {
|
|
wacom->result = 0;
|
|
|
|
switch (wacom->data[1]) {
|
|
case '#':
|
|
wacom_handle_model_response(wacom);
|
|
break;
|
|
case 'R':
|
|
wacom_handle_configuration_response(wacom);
|
|
break;
|
|
case 'C':
|
|
wacom_handle_coordinates_response(wacom);
|
|
break;
|
|
}
|
|
}
|
|
|
|
complete(&wacom->cmd_done);
|
|
}
|
|
|
|
static void wacom_handle_packet(struct wacom *wacom)
|
|
{
|
|
u8 in_proximity_p, stylus_p, button;
|
|
unsigned int tool;
|
|
int x, y, z;
|
|
|
|
in_proximity_p = wacom->data[0] & 0x40;
|
|
stylus_p = wacom->data[0] & 0x20;
|
|
button = (wacom->data[3] & 0x78) >> 3;
|
|
x = (wacom->data[0] & 3) << 14 | wacom->data[1]<<7 | wacom->data[2];
|
|
y = (wacom->data[3] & 3) << 14 | wacom->data[4]<<7 | wacom->data[5];
|
|
|
|
if (in_proximity_p && stylus_p) {
|
|
z = wacom->data[6] & 0x7f;
|
|
if (wacom->extra_z_bits >= 1)
|
|
z = z << 1 | (wacom->data[3] & 0x4) >> 2;
|
|
if (wacom->extra_z_bits > 1)
|
|
z = z << 1 | (wacom->data[0] & 0x4) >> 2;
|
|
z = z ^ (0x40 << wacom->extra_z_bits);
|
|
} else {
|
|
z = -1;
|
|
}
|
|
|
|
if (stylus_p)
|
|
tool = (button & wacom->eraser_mask) ? ERASER : STYLUS;
|
|
else
|
|
tool = CURSOR;
|
|
|
|
if (tool != wacom->tool && wacom->tool != 0) {
|
|
input_report_key(wacom->dev, tools[wacom->tool].input_id, 0);
|
|
input_sync(wacom->dev);
|
|
}
|
|
wacom->tool = tool;
|
|
|
|
input_report_key(wacom->dev, tools[tool].input_id, in_proximity_p);
|
|
input_report_abs(wacom->dev, ABS_MISC,
|
|
in_proximity_p ? tools[tool].device_id : 0);
|
|
input_report_abs(wacom->dev, ABS_X, x);
|
|
input_report_abs(wacom->dev, ABS_Y, y);
|
|
input_report_abs(wacom->dev, ABS_PRESSURE, z);
|
|
if (stylus_p) {
|
|
input_report_key(wacom->dev, BTN_TOUCH, button & 1);
|
|
input_report_key(wacom->dev, BTN_STYLUS, button & 2);
|
|
input_report_key(wacom->dev, BTN_STYLUS2, button & 4);
|
|
} else {
|
|
input_report_key(wacom->dev, BTN_LEFT, button & 1);
|
|
input_report_key(wacom->dev, BTN_RIGHT, button & 2);
|
|
input_report_key(wacom->dev, BTN_MIDDLE, button & 4);
|
|
/* handle relative wheel for non-stylus device */
|
|
z = (wacom->data[6] & 0x30) >> 4;
|
|
if (wacom->data[6] & 0x40)
|
|
z = -z;
|
|
input_report_rel(wacom->dev, REL_WHEEL, z);
|
|
}
|
|
input_sync(wacom->dev);
|
|
}
|
|
|
|
static void wacom_clear_data_buf(struct wacom *wacom)
|
|
{
|
|
memset(wacom->data, 0, DATA_SIZE);
|
|
wacom->idx = 0;
|
|
}
|
|
|
|
static irqreturn_t wacom_interrupt(struct serio *serio, unsigned char data,
|
|
unsigned int flags)
|
|
{
|
|
struct wacom *wacom = serio_get_drvdata(serio);
|
|
|
|
if (data & 0x80)
|
|
wacom->idx = 0;
|
|
|
|
/*
|
|
* We're either expecting a carriage return-terminated ASCII
|
|
* response string, or a seven-byte packet with the MSB set on
|
|
* the first byte.
|
|
*
|
|
* Note however that some tablets (the PenPartner, for
|
|
* example) don't send a carriage return at the end of a
|
|
* command. We handle these by waiting for timeout.
|
|
*/
|
|
if (data == '\r' && !(wacom->data[0] & 0x80)) {
|
|
wacom_handle_response(wacom);
|
|
wacom_clear_data_buf(wacom);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Leave place for 0 termination */
|
|
if (wacom->idx > (DATA_SIZE - 2)) {
|
|
dev_dbg(&wacom->dev->dev,
|
|
"throwing away %d bytes of garbage\n", wacom->idx);
|
|
wacom_clear_data_buf(wacom);
|
|
}
|
|
wacom->data[wacom->idx++] = data;
|
|
|
|
if (wacom->idx == PACKET_LENGTH && (wacom->data[0] & 0x80)) {
|
|
wacom_handle_packet(wacom);
|
|
wacom_clear_data_buf(wacom);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void wacom_disconnect(struct serio *serio)
|
|
{
|
|
struct wacom *wacom = serio_get_drvdata(serio);
|
|
|
|
serio_close(serio);
|
|
serio_set_drvdata(serio, NULL);
|
|
input_unregister_device(wacom->dev);
|
|
kfree(wacom);
|
|
}
|
|
|
|
static int wacom_send(struct serio *serio, const u8 *command)
|
|
{
|
|
int err = 0;
|
|
|
|
for (; !err && *command; command++)
|
|
err = serio_write(serio, *command);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int wacom_send_setup_string(struct wacom *wacom, struct serio *serio)
|
|
{
|
|
const u8 *cmd;
|
|
|
|
switch (wacom->dev->id.version) {
|
|
case MODEL_CINTIQ: /* UNTESTED */
|
|
cmd = COMMAND_ORIGIN_IN_UPPER_LEFT
|
|
COMMAND_TRANSMIT_AT_MAX_RATE
|
|
COMMAND_ENABLE_CONTINUOUS_MODE
|
|
COMMAND_START_SENDING_PACKETS;
|
|
break;
|
|
|
|
case MODEL_PENPARTNER:
|
|
cmd = COMMAND_ENABLE_PRESSURE_MODE
|
|
COMMAND_START_SENDING_PACKETS;
|
|
break;
|
|
|
|
default:
|
|
cmd = COMMAND_MULTI_MODE_INPUT
|
|
COMMAND_ORIGIN_IN_UPPER_LEFT
|
|
COMMAND_ENABLE_ALL_MACRO_BUTTONS
|
|
COMMAND_DISABLE_GROUP_1_MACRO_BUTTONS
|
|
COMMAND_TRANSMIT_AT_MAX_RATE
|
|
COMMAND_DISABLE_INCREMENTAL_MODE
|
|
COMMAND_ENABLE_CONTINUOUS_MODE
|
|
COMMAND_Z_FILTER
|
|
COMMAND_START_SENDING_PACKETS;
|
|
break;
|
|
}
|
|
|
|
return wacom_send(serio, cmd);
|
|
}
|
|
|
|
static int wacom_send_and_wait(struct wacom *wacom, struct serio *serio,
|
|
const u8 *cmd, const char *desc)
|
|
{
|
|
int err;
|
|
unsigned long u;
|
|
|
|
wacom->expect = cmd[1];
|
|
init_completion(&wacom->cmd_done);
|
|
|
|
err = wacom_send(serio, cmd);
|
|
if (err)
|
|
return err;
|
|
|
|
u = wait_for_completion_timeout(&wacom->cmd_done, HZ);
|
|
if (u == 0) {
|
|
/* Timeout, process what we've received. */
|
|
wacom_handle_response(wacom);
|
|
}
|
|
|
|
wacom->expect = 0;
|
|
return wacom->result;
|
|
}
|
|
|
|
static int wacom_setup(struct wacom *wacom, struct serio *serio)
|
|
{
|
|
int err;
|
|
|
|
/* Note that setting the link speed is the job of inputattach.
|
|
* We assume that reset negotiation has already happened,
|
|
* here. */
|
|
err = wacom_send_and_wait(wacom, serio, REQUEST_MODEL_AND_ROM_VERSION,
|
|
"model and version");
|
|
if (err)
|
|
return err;
|
|
|
|
if (!(wacom->res_x && wacom->res_y)) {
|
|
err = wacom_send_and_wait(wacom, serio,
|
|
REQUEST_CONFIGURATION_STRING,
|
|
"configuration string");
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
if (!(wacom->max_x && wacom->max_y)) {
|
|
err = wacom_send_and_wait(wacom, serio,
|
|
REQUEST_MAX_COORDINATES,
|
|
"coordinates string");
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
return wacom_send_setup_string(wacom, serio);
|
|
}
|
|
|
|
static int wacom_connect(struct serio *serio, struct serio_driver *drv)
|
|
{
|
|
struct wacom *wacom;
|
|
struct input_dev *input_dev;
|
|
int err = -ENOMEM;
|
|
|
|
wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
|
|
input_dev = input_allocate_device();
|
|
if (!wacom || !input_dev)
|
|
goto free_device;
|
|
|
|
wacom->dev = input_dev;
|
|
wacom->extra_z_bits = 1;
|
|
wacom->eraser_mask = 0x04;
|
|
wacom->tool = wacom->idx = 0;
|
|
snprintf(wacom->phys, sizeof(wacom->phys), "%s/input0", serio->phys);
|
|
input_dev->phys = wacom->phys;
|
|
input_dev->id.bustype = BUS_RS232;
|
|
input_dev->id.vendor = SERIO_WACOM_IV;
|
|
input_dev->id.product = serio->id.extra;
|
|
input_dev->dev.parent = &serio->dev;
|
|
|
|
input_dev->evbit[0] =
|
|
BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS) | BIT_MASK(EV_REL);
|
|
set_bit(ABS_MISC, input_dev->absbit);
|
|
set_bit(BTN_TOOL_PEN, input_dev->keybit);
|
|
set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
|
|
set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
|
|
set_bit(BTN_TOUCH, input_dev->keybit);
|
|
set_bit(BTN_STYLUS, input_dev->keybit);
|
|
set_bit(BTN_LEFT, input_dev->keybit);
|
|
set_bit(BTN_RIGHT, input_dev->keybit);
|
|
set_bit(BTN_MIDDLE, input_dev->keybit);
|
|
|
|
serio_set_drvdata(serio, wacom);
|
|
|
|
err = serio_open(serio, drv);
|
|
if (err)
|
|
goto free_device;
|
|
|
|
err = wacom_setup(wacom, serio);
|
|
if (err)
|
|
goto close_serio;
|
|
|
|
set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
|
|
if (!(wacom->flags & F_COVERS_SCREEN))
|
|
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
|
|
|
|
if (wacom->flags & F_HAS_STYLUS2)
|
|
__set_bit(BTN_STYLUS2, input_dev->keybit);
|
|
|
|
if (wacom->flags & F_HAS_SCROLLWHEEL)
|
|
__set_bit(REL_WHEEL, input_dev->relbit);
|
|
|
|
input_abs_set_res(wacom->dev, ABS_X, wacom->res_x);
|
|
input_abs_set_res(wacom->dev, ABS_Y, wacom->res_y);
|
|
input_set_abs_params(wacom->dev, ABS_X, 0, wacom->max_x, 0, 0);
|
|
input_set_abs_params(wacom->dev, ABS_Y, 0, wacom->max_y, 0, 0);
|
|
input_set_abs_params(wacom->dev, ABS_PRESSURE, -1,
|
|
(1 << (7 + wacom->extra_z_bits)) - 1, 0, 0);
|
|
|
|
err = input_register_device(wacom->dev);
|
|
if (err)
|
|
goto close_serio;
|
|
|
|
return 0;
|
|
|
|
close_serio:
|
|
serio_close(serio);
|
|
free_device:
|
|
serio_set_drvdata(serio, NULL);
|
|
input_free_device(input_dev);
|
|
kfree(wacom);
|
|
return err;
|
|
}
|
|
|
|
static struct serio_device_id wacom_serio_ids[] = {
|
|
{
|
|
.type = SERIO_RS232,
|
|
.proto = SERIO_WACOM_IV,
|
|
.id = SERIO_ANY,
|
|
.extra = SERIO_ANY,
|
|
},
|
|
{ 0 }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(serio, wacom_serio_ids);
|
|
|
|
static struct serio_driver wacom_drv = {
|
|
.driver = {
|
|
.name = "wacom_serial4",
|
|
},
|
|
.description = "Wacom protocol 4 serial tablet driver",
|
|
.id_table = wacom_serio_ids,
|
|
.interrupt = wacom_interrupt,
|
|
.connect = wacom_connect,
|
|
.disconnect = wacom_disconnect,
|
|
};
|
|
|
|
module_serio_driver(wacom_drv);
|