WSL2-Linux-Kernel/arch/mn10300/proc-mn103e010/proc-init.c

113 строки
2.9 KiB
C

/* MN103E010 Processor initialisation
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/kernel.h>
#include <asm/fpu.h>
#include <asm/rtc.h>
#include <asm/busctl-regs.h>
/*
* initialise the on-silicon processor peripherals
*/
asmlinkage void __init processor_init(void)
{
int loop;
/* set up the exception table first */
for (loop = 0x000; loop < 0x400; loop += 8)
__set_intr_stub(loop, __common_exception);
__set_intr_stub(EXCEP_ITLBMISS, itlb_miss);
__set_intr_stub(EXCEP_DTLBMISS, dtlb_miss);
__set_intr_stub(EXCEP_IAERROR, itlb_aerror);
__set_intr_stub(EXCEP_DAERROR, dtlb_aerror);
__set_intr_stub(EXCEP_BUSERROR, raw_bus_error);
__set_intr_stub(EXCEP_DOUBLE_FAULT, double_fault);
__set_intr_stub(EXCEP_FPU_DISABLED, fpu_disabled);
__set_intr_stub(EXCEP_SYSCALL0, system_call);
__set_intr_stub(EXCEP_NMI, nmi_handler);
__set_intr_stub(EXCEP_WDT, nmi_handler);
__set_intr_stub(EXCEP_IRQ_LEVEL0, irq_handler);
__set_intr_stub(EXCEP_IRQ_LEVEL1, irq_handler);
__set_intr_stub(EXCEP_IRQ_LEVEL2, irq_handler);
__set_intr_stub(EXCEP_IRQ_LEVEL3, irq_handler);
__set_intr_stub(EXCEP_IRQ_LEVEL4, irq_handler);
__set_intr_stub(EXCEP_IRQ_LEVEL5, irq_handler);
__set_intr_stub(EXCEP_IRQ_LEVEL6, irq_handler);
IVAR0 = EXCEP_IRQ_LEVEL0;
IVAR1 = EXCEP_IRQ_LEVEL1;
IVAR2 = EXCEP_IRQ_LEVEL2;
IVAR3 = EXCEP_IRQ_LEVEL3;
IVAR4 = EXCEP_IRQ_LEVEL4;
IVAR5 = EXCEP_IRQ_LEVEL5;
IVAR6 = EXCEP_IRQ_LEVEL6;
mn10300_dcache_flush_inv();
mn10300_icache_inv();
/* disable all interrupts and set to priority 6 (lowest) */
for (loop = 0; loop < NR_IRQS; loop++)
GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT;
/* clear the timers */
TM0MD = 0;
TM1MD = 0;
TM2MD = 0;
TM3MD = 0;
TM4MD = 0;
TM5MD = 0;
TM6MD = 0;
TM6MDA = 0;
TM6MDB = 0;
TM7MD = 0;
TM8MD = 0;
TM9MD = 0;
TM10MD = 0;
TM11MD = 0;
calibrate_clock();
}
/*
* determine the memory size and base from the memory controller regs
*/
void __init get_mem_info(unsigned long *mem_base, unsigned long *mem_size)
{
unsigned long base, size;
*mem_base = 0;
*mem_size = 0;
base = SDBASE(0);
if (base & SDBASE_CE) {
size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT;
size = ~size + 1;
base &= SDBASE_CBA;
printk(KERN_INFO "SDRAM[0]: %luMb @%08lx\n", size >> 20, base);
*mem_size += size;
*mem_base = base;
}
base = SDBASE(1);
if (base & SDBASE_CE) {
size = (base & SDBASE_CBAM) << SDBASE_CBAM_SHIFT;
size = ~size + 1;
base &= SDBASE_CBA;
printk(KERN_INFO "SDRAM[1]: %luMb @%08lx\n", size >> 20, base);
*mem_size += size;
if (*mem_base == 0)
*mem_base = base;
}
}