485 строки
17 KiB
C
485 строки
17 KiB
C
/*
|
|
* Driver for ITE Tech Inc. IT8712F/IT8512F CIR
|
|
*
|
|
* Copyright (C) 2010 Juan Jesús García de Soria <skandalfo@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
|
|
* USA.
|
|
*/
|
|
|
|
/* platform driver name to register */
|
|
#define ITE_DRIVER_NAME "ite-cir"
|
|
|
|
/* logging macros */
|
|
#define ite_pr(level, text, ...) \
|
|
printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__)
|
|
#define ite_dbg(text, ...) do { \
|
|
if (debug) \
|
|
printk(KERN_DEBUG \
|
|
KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__); \
|
|
} while (0)
|
|
|
|
#define ite_dbg_verbose(text, ...) do {\
|
|
if (debug > 1) \
|
|
printk(KERN_DEBUG \
|
|
KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__); \
|
|
} while (0)
|
|
|
|
/* FIFO sizes */
|
|
#define ITE_TX_FIFO_LEN 32
|
|
#define ITE_RX_FIFO_LEN 32
|
|
|
|
/* interrupt types */
|
|
#define ITE_IRQ_TX_FIFO 1
|
|
#define ITE_IRQ_RX_FIFO 2
|
|
#define ITE_IRQ_RX_FIFO_OVERRUN 4
|
|
|
|
/* forward declaration */
|
|
struct ite_dev;
|
|
|
|
/* struct for storing the parameters of different recognized devices */
|
|
struct ite_dev_params {
|
|
/* model of the device */
|
|
const char *model;
|
|
|
|
/* size of the I/O region */
|
|
int io_region_size;
|
|
|
|
/* IR pnp I/O resource number */
|
|
int io_rsrc_no;
|
|
|
|
/* true if the hardware supports transmission */
|
|
bool hw_tx_capable;
|
|
|
|
/* base sampling period, in ns */
|
|
u32 sample_period;
|
|
|
|
/* rx low carrier frequency, in Hz, 0 means no demodulation */
|
|
unsigned int rx_low_carrier_freq;
|
|
|
|
/* tx high carrier frequency, in Hz, 0 means no demodulation */
|
|
unsigned int rx_high_carrier_freq;
|
|
|
|
/* tx carrier frequency, in Hz */
|
|
unsigned int tx_carrier_freq;
|
|
|
|
/* duty cycle, 0-100 */
|
|
int tx_duty_cycle;
|
|
|
|
/* hw-specific operation function pointers; most of these must be
|
|
* called while holding the spin lock, except for the TX FIFO length
|
|
* one */
|
|
/* get pending interrupt causes */
|
|
int (*get_irq_causes) (struct ite_dev *dev);
|
|
|
|
/* enable rx */
|
|
void (*enable_rx) (struct ite_dev *dev);
|
|
|
|
/* make rx enter the idle state; keep listening for a pulse, but stop
|
|
* streaming space bytes */
|
|
void (*idle_rx) (struct ite_dev *dev);
|
|
|
|
/* disable rx completely */
|
|
void (*disable_rx) (struct ite_dev *dev);
|
|
|
|
/* read bytes from RX FIFO; return read count */
|
|
int (*get_rx_bytes) (struct ite_dev *dev, u8 *buf, int buf_size);
|
|
|
|
/* enable tx FIFO space available interrupt */
|
|
void (*enable_tx_interrupt) (struct ite_dev *dev);
|
|
|
|
/* disable tx FIFO space available interrupt */
|
|
void (*disable_tx_interrupt) (struct ite_dev *dev);
|
|
|
|
/* get number of full TX FIFO slots */
|
|
int (*get_tx_used_slots) (struct ite_dev *dev);
|
|
|
|
/* put a byte to the TX FIFO */
|
|
void (*put_tx_byte) (struct ite_dev *dev, u8 value);
|
|
|
|
/* disable hardware completely */
|
|
void (*disable) (struct ite_dev *dev);
|
|
|
|
/* initialize the hardware */
|
|
void (*init_hardware) (struct ite_dev *dev);
|
|
|
|
/* set the carrier parameters */
|
|
void (*set_carrier_params) (struct ite_dev *dev, bool high_freq,
|
|
bool use_demodulator, u8 carrier_freq_bits,
|
|
u8 allowance_bits, u8 pulse_width_bits);
|
|
};
|
|
|
|
/* ITE CIR device structure */
|
|
struct ite_dev {
|
|
struct pnp_dev *pdev;
|
|
struct rc_dev *rdev;
|
|
struct ir_raw_event rawir;
|
|
|
|
/* sync data */
|
|
spinlock_t lock;
|
|
bool in_use, transmitting;
|
|
|
|
/* transmit support */
|
|
int tx_fifo_allowance;
|
|
wait_queue_head_t tx_queue, tx_ended;
|
|
|
|
/* hardware I/O settings */
|
|
unsigned long cir_addr;
|
|
int cir_irq;
|
|
|
|
/* overridable copy of model parameters */
|
|
struct ite_dev_params params;
|
|
};
|
|
|
|
/* common values for all kinds of hardware */
|
|
|
|
/* baud rate divisor default */
|
|
#define ITE_BAUDRATE_DIVISOR 1
|
|
|
|
/* low-speed carrier frequency limits (Hz) */
|
|
#define ITE_LCF_MIN_CARRIER_FREQ 27000
|
|
#define ITE_LCF_MAX_CARRIER_FREQ 58000
|
|
|
|
/* high-speed carrier frequency limits (Hz) */
|
|
#define ITE_HCF_MIN_CARRIER_FREQ 400000
|
|
#define ITE_HCF_MAX_CARRIER_FREQ 500000
|
|
|
|
/* default carrier freq for when demodulator is off (Hz) */
|
|
#define ITE_DEFAULT_CARRIER_FREQ 38000
|
|
|
|
/* default idling timeout in ns (0.2 seconds) */
|
|
#define ITE_IDLE_TIMEOUT 200000000UL
|
|
|
|
/* limit timeout values */
|
|
#define ITE_MIN_IDLE_TIMEOUT 100000000UL
|
|
#define ITE_MAX_IDLE_TIMEOUT 1000000000UL
|
|
|
|
/* convert bits to us */
|
|
#define ITE_BITS_TO_NS(bits, sample_period) \
|
|
((u32) ((bits) * ITE_BAUDRATE_DIVISOR * sample_period))
|
|
|
|
/*
|
|
* n in RDCR produces a tolerance of +/- n * 6.25% around the center
|
|
* carrier frequency...
|
|
*
|
|
* From two limit frequencies, L (low) and H (high), we can get both the
|
|
* center frequency F = (L + H) / 2 and the variation from the center
|
|
* frequency A = (H - L) / (H + L). We can use this in order to honor the
|
|
* s_rx_carrier_range() call in ir-core. We'll suppose that any request
|
|
* setting L=0 means we must shut down the demodulator.
|
|
*/
|
|
#define ITE_RXDCR_PER_10000_STEP 625
|
|
|
|
/* high speed carrier freq values */
|
|
#define ITE_CFQ_400 0x03
|
|
#define ITE_CFQ_450 0x08
|
|
#define ITE_CFQ_480 0x0b
|
|
#define ITE_CFQ_500 0x0d
|
|
|
|
/* values for pulse widths */
|
|
#define ITE_TXMPW_A 0x02
|
|
#define ITE_TXMPW_B 0x03
|
|
#define ITE_TXMPW_C 0x04
|
|
#define ITE_TXMPW_D 0x05
|
|
#define ITE_TXMPW_E 0x06
|
|
|
|
/* values for demodulator carrier range allowance */
|
|
#define ITE_RXDCR_DEFAULT 0x01 /* default carrier range */
|
|
#define ITE_RXDCR_MAX 0x07 /* default carrier range */
|
|
|
|
/* DR TX bits */
|
|
#define ITE_TX_PULSE 0x00
|
|
#define ITE_TX_SPACE 0x80
|
|
#define ITE_TX_MAX_RLE 0x80
|
|
#define ITE_TX_RLE_MASK 0x7f
|
|
|
|
/*
|
|
* IT8712F
|
|
*
|
|
* hardware data obtained from:
|
|
*
|
|
* IT8712F
|
|
* Environment Control – Low Pin Count Input / Output
|
|
* (EC - LPC I/O)
|
|
* Preliminary Specification V0. 81
|
|
*/
|
|
|
|
/* register offsets */
|
|
#define IT87_DR 0x00 /* data register */
|
|
#define IT87_IER 0x01 /* interrupt enable register */
|
|
#define IT87_RCR 0x02 /* receiver control register */
|
|
#define IT87_TCR1 0x03 /* transmitter control register 1 */
|
|
#define IT87_TCR2 0x04 /* transmitter control register 2 */
|
|
#define IT87_TSR 0x05 /* transmitter status register */
|
|
#define IT87_RSR 0x06 /* receiver status register */
|
|
#define IT87_BDLR 0x05 /* baud rate divisor low byte register */
|
|
#define IT87_BDHR 0x06 /* baud rate divisor high byte register */
|
|
#define IT87_IIR 0x07 /* interrupt identification register */
|
|
|
|
#define IT87_IOREG_LENGTH 0x08 /* length of register file */
|
|
|
|
/* IER bits */
|
|
#define IT87_TLDLIE 0x01 /* transmitter low data interrupt enable */
|
|
#define IT87_RDAIE 0x02 /* receiver data available interrupt enable */
|
|
#define IT87_RFOIE 0x04 /* receiver FIFO overrun interrupt enable */
|
|
#define IT87_IEC 0x08 /* interrupt enable control */
|
|
#define IT87_BR 0x10 /* baud rate register enable */
|
|
#define IT87_RESET 0x20 /* reset */
|
|
|
|
/* RCR bits */
|
|
#define IT87_RXDCR 0x07 /* receiver demodulation carrier range mask */
|
|
#define IT87_RXACT 0x08 /* receiver active */
|
|
#define IT87_RXEND 0x10 /* receiver demodulation enable */
|
|
#define IT87_RXEN 0x20 /* receiver enable */
|
|
#define IT87_HCFS 0x40 /* high-speed carrier frequency select */
|
|
#define IT87_RDWOS 0x80 /* receiver data without sync */
|
|
|
|
/* TCR1 bits */
|
|
#define IT87_TXMPM 0x03 /* transmitter modulation pulse mode mask */
|
|
#define IT87_TXMPM_DEFAULT 0x00 /* modulation pulse mode default */
|
|
#define IT87_TXENDF 0x04 /* transmitter deferral */
|
|
#define IT87_TXRLE 0x08 /* transmitter run length enable */
|
|
#define IT87_FIFOTL 0x30 /* FIFO level threshold mask */
|
|
#define IT87_FIFOTL_DEFAULT 0x20 /* FIFO level threshold default
|
|
* 0x00 -> 1, 0x10 -> 7, 0x20 -> 17,
|
|
* 0x30 -> 25 */
|
|
#define IT87_ILE 0x40 /* internal loopback enable */
|
|
#define IT87_FIFOCLR 0x80 /* FIFO clear bit */
|
|
|
|
/* TCR2 bits */
|
|
#define IT87_TXMPW 0x07 /* transmitter modulation pulse width mask */
|
|
#define IT87_TXMPW_DEFAULT 0x04 /* default modulation pulse width */
|
|
#define IT87_CFQ 0xf8 /* carrier frequency mask */
|
|
#define IT87_CFQ_SHIFT 3 /* carrier frequency bit shift */
|
|
|
|
/* TSR bits */
|
|
#define IT87_TXFBC 0x3f /* transmitter FIFO byte count mask */
|
|
|
|
/* RSR bits */
|
|
#define IT87_RXFBC 0x3f /* receiver FIFO byte count mask */
|
|
#define IT87_RXFTO 0x80 /* receiver FIFO time-out */
|
|
|
|
/* IIR bits */
|
|
#define IT87_IP 0x01 /* interrupt pending */
|
|
#define IT87_II 0x06 /* interrupt identification mask */
|
|
#define IT87_II_NOINT 0x00 /* no interrupt */
|
|
#define IT87_II_TXLDL 0x02 /* transmitter low data level */
|
|
#define IT87_II_RXDS 0x04 /* receiver data stored */
|
|
#define IT87_II_RXFO 0x06 /* receiver FIFO overrun */
|
|
|
|
/*
|
|
* IT8512E/F
|
|
*
|
|
* Hardware data obtained from:
|
|
*
|
|
* IT8512E/F
|
|
* Embedded Controller
|
|
* Preliminary Specification V0.4.1
|
|
*
|
|
* Note that the CIR registers are not directly available to the host, because
|
|
* they only are accessible to the integrated microcontroller. Thus, in order
|
|
* use it, some kind of bridging is required. As the bridging may depend on
|
|
* the controller firmware in use, we are going to use the PNP ID in order to
|
|
* determine the strategy and ports available. See after these generic
|
|
* IT8512E/F register definitions for register definitions for those
|
|
* strategies.
|
|
*/
|
|
|
|
/* register offsets */
|
|
#define IT85_C0DR 0x00 /* data register */
|
|
#define IT85_C0MSTCR 0x01 /* master control register */
|
|
#define IT85_C0IER 0x02 /* interrupt enable register */
|
|
#define IT85_C0IIR 0x03 /* interrupt identification register */
|
|
#define IT85_C0CFR 0x04 /* carrier frequency register */
|
|
#define IT85_C0RCR 0x05 /* receiver control register */
|
|
#define IT85_C0TCR 0x06 /* transmitter control register */
|
|
#define IT85_C0SCK 0x07 /* slow clock control register */
|
|
#define IT85_C0BDLR 0x08 /* baud rate divisor low byte register */
|
|
#define IT85_C0BDHR 0x09 /* baud rate divisor high byte register */
|
|
#define IT85_C0TFSR 0x0a /* transmitter FIFO status register */
|
|
#define IT85_C0RFSR 0x0b /* receiver FIFO status register */
|
|
#define IT85_C0WCL 0x0d /* wakeup code length register */
|
|
#define IT85_C0WCR 0x0e /* wakeup code read/write register */
|
|
#define IT85_C0WPS 0x0f /* wakeup power control/status register */
|
|
|
|
#define IT85_IOREG_LENGTH 0x10 /* length of register file */
|
|
|
|
/* C0MSTCR bits */
|
|
#define IT85_RESET 0x01 /* reset */
|
|
#define IT85_FIFOCLR 0x02 /* FIFO clear bit */
|
|
#define IT85_FIFOTL 0x0c /* FIFO level threshold mask */
|
|
#define IT85_FIFOTL_DEFAULT 0x08 /* FIFO level threshold default
|
|
* 0x00 -> 1, 0x04 -> 7, 0x08 -> 17,
|
|
* 0x0c -> 25 */
|
|
#define IT85_ILE 0x10 /* internal loopback enable */
|
|
#define IT85_ILSEL 0x20 /* internal loopback select */
|
|
|
|
/* C0IER bits */
|
|
#define IT85_TLDLIE 0x01 /* TX low data level interrupt enable */
|
|
#define IT85_RDAIE 0x02 /* RX data available interrupt enable */
|
|
#define IT85_RFOIE 0x04 /* RX FIFO overrun interrupt enable */
|
|
#define IT85_IEC 0x80 /* interrupt enable function control */
|
|
|
|
/* C0IIR bits */
|
|
#define IT85_TLDLI 0x01 /* transmitter low data level interrupt */
|
|
#define IT85_RDAI 0x02 /* receiver data available interrupt */
|
|
#define IT85_RFOI 0x04 /* receiver FIFO overrun interrupt */
|
|
#define IT85_NIP 0x80 /* no interrupt pending */
|
|
|
|
/* C0CFR bits */
|
|
#define IT85_CFQ 0x1f /* carrier frequency mask */
|
|
#define IT85_HCFS 0x20 /* high speed carrier frequency select */
|
|
|
|
/* C0RCR bits */
|
|
#define IT85_RXDCR 0x07 /* receiver demodulation carrier range mask */
|
|
#define IT85_RXACT 0x08 /* receiver active */
|
|
#define IT85_RXEND 0x10 /* receiver demodulation enable */
|
|
#define IT85_RDWOS 0x20 /* receiver data without sync */
|
|
#define IT85_RXEN 0x80 /* receiver enable */
|
|
|
|
/* C0TCR bits */
|
|
#define IT85_TXMPW 0x07 /* transmitter modulation pulse width mask */
|
|
#define IT85_TXMPW_DEFAULT 0x04 /* default modulation pulse width */
|
|
#define IT85_TXMPM 0x18 /* transmitter modulation pulse mode mask */
|
|
#define IT85_TXMPM_DEFAULT 0x00 /* modulation pulse mode default */
|
|
#define IT85_TXENDF 0x20 /* transmitter deferral */
|
|
#define IT85_TXRLE 0x40 /* transmitter run length enable */
|
|
|
|
/* C0SCK bits */
|
|
#define IT85_SCKS 0x01 /* slow clock select */
|
|
#define IT85_TXDCKG 0x02 /* TXD clock gating */
|
|
#define IT85_DLL1P8E 0x04 /* DLL 1.8432M enable */
|
|
#define IT85_DLLTE 0x08 /* DLL test enable */
|
|
#define IT85_BRCM 0x70 /* baud rate count mode */
|
|
#define IT85_DLLOCK 0x80 /* DLL lock */
|
|
|
|
/* C0TFSR bits */
|
|
#define IT85_TXFBC 0x3f /* transmitter FIFO count mask */
|
|
|
|
/* C0RFSR bits */
|
|
#define IT85_RXFBC 0x3f /* receiver FIFO count mask */
|
|
#define IT85_RXFTO 0x80 /* receiver FIFO time-out */
|
|
|
|
/* C0WCL bits */
|
|
#define IT85_WCL 0x3f /* wakeup code length mask */
|
|
|
|
/* C0WPS bits */
|
|
#define IT85_CIRPOSIE 0x01 /* power on/off status interrupt enable */
|
|
#define IT85_CIRPOIS 0x02 /* power on/off interrupt status */
|
|
#define IT85_CIRPOII 0x04 /* power on/off interrupt identification */
|
|
#define IT85_RCRST 0x10 /* wakeup code reading counter reset bit */
|
|
#define IT85_WCRST 0x20 /* wakeup code writing counter reset bit */
|
|
|
|
/*
|
|
* ITE8708
|
|
*
|
|
* Hardware data obtained from hacked driver for IT8512 in this forum post:
|
|
*
|
|
* http://ubuntuforums.org/showthread.php?t=1028640
|
|
*
|
|
* Although there's no official documentation for that driver, analysis would
|
|
* suggest that it maps the 16 registers of IT8512 onto two 8-register banks,
|
|
* selectable by a single bank-select bit that's mapped onto both banks. The
|
|
* IT8512 registers are mapped in a different order, so that the first bank
|
|
* maps the ones that are used more often, and two registers that share a
|
|
* reserved high-order bit are placed at the same offset in both banks in
|
|
* order to reuse the reserved bit as the bank select bit.
|
|
*/
|
|
|
|
/* register offsets */
|
|
|
|
/* mapped onto both banks */
|
|
#define IT8708_BANKSEL 0x07 /* bank select register */
|
|
#define IT8708_HRAE 0x80 /* high registers access enable */
|
|
|
|
/* mapped onto the low bank */
|
|
#define IT8708_C0DR 0x00 /* data register */
|
|
#define IT8708_C0MSTCR 0x01 /* master control register */
|
|
#define IT8708_C0IER 0x02 /* interrupt enable register */
|
|
#define IT8708_C0IIR 0x03 /* interrupt identification register */
|
|
#define IT8708_C0RFSR 0x04 /* receiver FIFO status register */
|
|
#define IT8708_C0RCR 0x05 /* receiver control register */
|
|
#define IT8708_C0TFSR 0x06 /* transmitter FIFO status register */
|
|
#define IT8708_C0TCR 0x07 /* transmitter control register */
|
|
|
|
/* mapped onto the high bank */
|
|
#define IT8708_C0BDLR 0x01 /* baud rate divisor low byte register */
|
|
#define IT8708_C0BDHR 0x02 /* baud rate divisor high byte register */
|
|
#define IT8708_C0CFR 0x04 /* carrier frequency register */
|
|
|
|
/* registers whose bank mapping we don't know, since they weren't being used
|
|
* in the hacked driver... most probably they belong to the high bank too,
|
|
* since they fit in the holes the other registers leave */
|
|
#define IT8708_C0SCK 0x03 /* slow clock control register */
|
|
#define IT8708_C0WCL 0x05 /* wakeup code length register */
|
|
#define IT8708_C0WCR 0x06 /* wakeup code read/write register */
|
|
#define IT8708_C0WPS 0x07 /* wakeup power control/status register */
|
|
|
|
#define IT8708_IOREG_LENGTH 0x08 /* length of register file */
|
|
|
|
/* two more registers that are defined in the hacked driver, but can't be
|
|
* found in the data sheets; no idea what they are or how they are accessed,
|
|
* since the hacked driver doesn't seem to use them */
|
|
#define IT8708_CSCRR 0x00
|
|
#define IT8708_CGPINTR 0x01
|
|
|
|
/* CSCRR bits */
|
|
#define IT8708_CSCRR_SCRB 0x3f
|
|
#define IT8708_CSCRR_PM 0x80
|
|
|
|
/* CGPINTR bits */
|
|
#define IT8708_CGPINT 0x01
|
|
|
|
/*
|
|
* ITE8709
|
|
*
|
|
* Hardware interfacing data obtained from the original lirc_ite8709 driver.
|
|
* Verbatim from its sources:
|
|
*
|
|
* The ITE8709 device seems to be the combination of IT8512 superIO chip and
|
|
* a specific firmware running on the IT8512's embedded micro-controller.
|
|
* In addition of the embedded micro-controller, the IT8512 chip contains a
|
|
* CIR module and several other modules. A few modules are directly accessible
|
|
* by the host CPU, but most of them are only accessible by the
|
|
* micro-controller. The CIR module is only accessible by the
|
|
* micro-controller.
|
|
*
|
|
* The battery-backed SRAM module is accessible by the host CPU and the
|
|
* micro-controller. So one of the MC's firmware role is to act as a bridge
|
|
* between the host CPU and the CIR module. The firmware implements a kind of
|
|
* communication protocol using the SRAM module as a shared memory. The IT8512
|
|
* specification is publicly available on ITE's web site, but the
|
|
* communication protocol is not, so it was reverse-engineered.
|
|
*/
|
|
|
|
/* register offsets */
|
|
#define IT8709_RAM_IDX 0x00 /* index into the SRAM module bytes */
|
|
#define IT8709_RAM_VAL 0x01 /* read/write data to the indexed byte */
|
|
|
|
#define IT8709_IOREG_LENGTH 0x02 /* length of register file */
|
|
|
|
/* register offsets inside the SRAM module */
|
|
#define IT8709_MODE 0x1a /* request/ack byte */
|
|
#define IT8709_REG_IDX 0x1b /* index of the CIR register to access */
|
|
#define IT8709_REG_VAL 0x1c /* value read/to be written */
|
|
#define IT8709_IIR 0x1e /* interrupt identification register */
|
|
#define IT8709_RFSR 0x1f /* receiver FIFO status register */
|
|
#define IT8709_FIFO 0x20 /* start of in RAM RX FIFO copy */
|
|
|
|
/* MODE values */
|
|
#define IT8709_IDLE 0x00
|
|
#define IT8709_WRITE 0x01
|
|
#define IT8709_READ 0x02
|