470 строки
11 KiB
C
470 строки
11 KiB
C
/*
|
|
* I2C client/driver for the Maxim/Dallas DS2782 Stand-Alone Fuel Gauge IC
|
|
*
|
|
* Copyright (C) 2009 Bluewater Systems Ltd
|
|
*
|
|
* Author: Ryan Mallon
|
|
*
|
|
* DS2786 added by Yulia Vilensky <vilensky@compulab.co.il>
|
|
*
|
|
* UEvent sending added by Evgeny Romanov <romanov@neurosoft.ru>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/swab.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/idr.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/ds2782_battery.h>
|
|
|
|
#define DS2782_REG_RARC 0x06 /* Remaining active relative capacity */
|
|
|
|
#define DS278x_REG_VOLT_MSB 0x0c
|
|
#define DS278x_REG_TEMP_MSB 0x0a
|
|
#define DS278x_REG_CURRENT_MSB 0x0e
|
|
|
|
/* EEPROM Block */
|
|
#define DS2782_REG_RSNSP 0x69 /* Sense resistor value */
|
|
|
|
/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
|
|
#define DS2782_CURRENT_UNITS 1563
|
|
|
|
#define DS2786_REG_RARC 0x02 /* Remaining active relative capacity */
|
|
|
|
#define DS2786_CURRENT_UNITS 25
|
|
|
|
#define DS278x_DELAY 1000
|
|
|
|
struct ds278x_info;
|
|
|
|
struct ds278x_battery_ops {
|
|
int (*get_battery_current)(struct ds278x_info *info, int *current_uA);
|
|
int (*get_battery_voltage)(struct ds278x_info *info, int *voltage_uV);
|
|
int (*get_battery_capacity)(struct ds278x_info *info, int *capacity);
|
|
};
|
|
|
|
#define to_ds278x_info(x) container_of(x, struct ds278x_info, battery)
|
|
|
|
struct ds278x_info {
|
|
struct i2c_client *client;
|
|
struct power_supply battery;
|
|
struct ds278x_battery_ops *ops;
|
|
struct delayed_work bat_work;
|
|
int id;
|
|
int rsns;
|
|
int capacity;
|
|
int status; /* State Of Charge */
|
|
};
|
|
|
|
static DEFINE_IDR(battery_id);
|
|
static DEFINE_MUTEX(battery_lock);
|
|
|
|
static inline int ds278x_read_reg(struct ds278x_info *info, int reg, u8 *val)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_smbus_read_byte_data(info->client, reg);
|
|
if (ret < 0) {
|
|
dev_err(&info->client->dev, "register read failed\n");
|
|
return ret;
|
|
}
|
|
|
|
*val = ret;
|
|
return 0;
|
|
}
|
|
|
|
static inline int ds278x_read_reg16(struct ds278x_info *info, int reg_msb,
|
|
s16 *val)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_smbus_read_word_data(info->client, reg_msb);
|
|
if (ret < 0) {
|
|
dev_err(&info->client->dev, "register read failed\n");
|
|
return ret;
|
|
}
|
|
|
|
*val = swab16(ret);
|
|
return 0;
|
|
}
|
|
|
|
static int ds278x_get_temp(struct ds278x_info *info, int *temp)
|
|
{
|
|
s16 raw;
|
|
int err;
|
|
|
|
/*
|
|
* Temperature is measured in units of 0.125 degrees celcius, the
|
|
* power_supply class measures temperature in tenths of degrees
|
|
* celsius. The temperature value is stored as a 10 bit number, plus
|
|
* sign in the upper bits of a 16 bit register.
|
|
*/
|
|
err = ds278x_read_reg16(info, DS278x_REG_TEMP_MSB, &raw);
|
|
if (err)
|
|
return err;
|
|
*temp = ((raw / 32) * 125) / 100;
|
|
return 0;
|
|
}
|
|
|
|
static int ds2782_get_current(struct ds278x_info *info, int *current_uA)
|
|
{
|
|
int sense_res;
|
|
int err;
|
|
u8 sense_res_raw;
|
|
s16 raw;
|
|
|
|
/*
|
|
* The units of measurement for current are dependent on the value of
|
|
* the sense resistor.
|
|
*/
|
|
err = ds278x_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw);
|
|
if (err)
|
|
return err;
|
|
if (sense_res_raw == 0) {
|
|
dev_err(&info->client->dev, "sense resistor value is 0\n");
|
|
return -ENXIO;
|
|
}
|
|
sense_res = 1000 / sense_res_raw;
|
|
|
|
dev_dbg(&info->client->dev, "sense resistor = %d milli-ohms\n",
|
|
sense_res);
|
|
err = ds278x_read_reg16(info, DS278x_REG_CURRENT_MSB, &raw);
|
|
if (err)
|
|
return err;
|
|
*current_uA = raw * (DS2782_CURRENT_UNITS / sense_res);
|
|
return 0;
|
|
}
|
|
|
|
static int ds2782_get_voltage(struct ds278x_info *info, int *voltage_uV)
|
|
{
|
|
s16 raw;
|
|
int err;
|
|
|
|
/*
|
|
* Voltage is measured in units of 4.88mV. The voltage is stored as
|
|
* a 10-bit number plus sign, in the upper bits of a 16-bit register
|
|
*/
|
|
err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw);
|
|
if (err)
|
|
return err;
|
|
*voltage_uV = (raw / 32) * 4800;
|
|
return 0;
|
|
}
|
|
|
|
static int ds2782_get_capacity(struct ds278x_info *info, int *capacity)
|
|
{
|
|
int err;
|
|
u8 raw;
|
|
|
|
err = ds278x_read_reg(info, DS2782_REG_RARC, &raw);
|
|
if (err)
|
|
return err;
|
|
*capacity = raw;
|
|
return 0;
|
|
}
|
|
|
|
static int ds2786_get_current(struct ds278x_info *info, int *current_uA)
|
|
{
|
|
int err;
|
|
s16 raw;
|
|
|
|
err = ds278x_read_reg16(info, DS278x_REG_CURRENT_MSB, &raw);
|
|
if (err)
|
|
return err;
|
|
*current_uA = (raw / 16) * (DS2786_CURRENT_UNITS / info->rsns);
|
|
return 0;
|
|
}
|
|
|
|
static int ds2786_get_voltage(struct ds278x_info *info, int *voltage_uV)
|
|
{
|
|
s16 raw;
|
|
int err;
|
|
|
|
/*
|
|
* Voltage is measured in units of 1.22mV. The voltage is stored as
|
|
* a 12-bit number plus sign, in the upper bits of a 16-bit register
|
|
*/
|
|
err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw);
|
|
if (err)
|
|
return err;
|
|
*voltage_uV = (raw / 8) * 1220;
|
|
return 0;
|
|
}
|
|
|
|
static int ds2786_get_capacity(struct ds278x_info *info, int *capacity)
|
|
{
|
|
int err;
|
|
u8 raw;
|
|
|
|
err = ds278x_read_reg(info, DS2786_REG_RARC, &raw);
|
|
if (err)
|
|
return err;
|
|
/* Relative capacity is displayed with resolution 0.5 % */
|
|
*capacity = raw/2 ;
|
|
return 0;
|
|
}
|
|
|
|
static int ds278x_get_status(struct ds278x_info *info, int *status)
|
|
{
|
|
int err;
|
|
int current_uA;
|
|
int capacity;
|
|
|
|
err = info->ops->get_battery_current(info, ¤t_uA);
|
|
if (err)
|
|
return err;
|
|
|
|
err = info->ops->get_battery_capacity(info, &capacity);
|
|
if (err)
|
|
return err;
|
|
|
|
info->capacity = capacity;
|
|
|
|
if (capacity == 100)
|
|
*status = POWER_SUPPLY_STATUS_FULL;
|
|
else if (current_uA == 0)
|
|
*status = POWER_SUPPLY_STATUS_NOT_CHARGING;
|
|
else if (current_uA < 0)
|
|
*status = POWER_SUPPLY_STATUS_DISCHARGING;
|
|
else
|
|
*status = POWER_SUPPLY_STATUS_CHARGING;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ds278x_battery_get_property(struct power_supply *psy,
|
|
enum power_supply_property prop,
|
|
union power_supply_propval *val)
|
|
{
|
|
struct ds278x_info *info = to_ds278x_info(psy);
|
|
int ret;
|
|
|
|
switch (prop) {
|
|
case POWER_SUPPLY_PROP_STATUS:
|
|
ret = ds278x_get_status(info, &val->intval);
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_CAPACITY:
|
|
ret = info->ops->get_battery_capacity(info, &val->intval);
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
|
|
ret = info->ops->get_battery_voltage(info, &val->intval);
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_CURRENT_NOW:
|
|
ret = info->ops->get_battery_current(info, &val->intval);
|
|
break;
|
|
|
|
case POWER_SUPPLY_PROP_TEMP:
|
|
ret = ds278x_get_temp(info, &val->intval);
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ds278x_bat_update(struct ds278x_info *info)
|
|
{
|
|
int old_status = info->status;
|
|
int old_capacity = info->capacity;
|
|
|
|
ds278x_get_status(info, &info->status);
|
|
|
|
if ((old_status != info->status) || (old_capacity != info->capacity))
|
|
power_supply_changed(&info->battery);
|
|
}
|
|
|
|
static void ds278x_bat_work(struct work_struct *work)
|
|
{
|
|
struct ds278x_info *info;
|
|
|
|
info = container_of(work, struct ds278x_info, bat_work.work);
|
|
ds278x_bat_update(info);
|
|
|
|
schedule_delayed_work(&info->bat_work, DS278x_DELAY);
|
|
}
|
|
|
|
static enum power_supply_property ds278x_battery_props[] = {
|
|
POWER_SUPPLY_PROP_STATUS,
|
|
POWER_SUPPLY_PROP_CAPACITY,
|
|
POWER_SUPPLY_PROP_VOLTAGE_NOW,
|
|
POWER_SUPPLY_PROP_CURRENT_NOW,
|
|
POWER_SUPPLY_PROP_TEMP,
|
|
};
|
|
|
|
static void ds278x_power_supply_init(struct power_supply *battery)
|
|
{
|
|
battery->type = POWER_SUPPLY_TYPE_BATTERY;
|
|
battery->properties = ds278x_battery_props;
|
|
battery->num_properties = ARRAY_SIZE(ds278x_battery_props);
|
|
battery->get_property = ds278x_battery_get_property;
|
|
battery->external_power_changed = NULL;
|
|
}
|
|
|
|
static int ds278x_battery_remove(struct i2c_client *client)
|
|
{
|
|
struct ds278x_info *info = i2c_get_clientdata(client);
|
|
|
|
power_supply_unregister(&info->battery);
|
|
kfree(info->battery.name);
|
|
|
|
mutex_lock(&battery_lock);
|
|
idr_remove(&battery_id, info->id);
|
|
mutex_unlock(&battery_lock);
|
|
|
|
cancel_delayed_work(&info->bat_work);
|
|
|
|
kfree(info);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
|
|
static int ds278x_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct ds278x_info *info = i2c_get_clientdata(client);
|
|
|
|
cancel_delayed_work(&info->bat_work);
|
|
return 0;
|
|
}
|
|
|
|
static int ds278x_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct ds278x_info *info = i2c_get_clientdata(client);
|
|
|
|
schedule_delayed_work(&info->bat_work, DS278x_DELAY);
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static SIMPLE_DEV_PM_OPS(ds278x_battery_pm_ops, ds278x_suspend, ds278x_resume);
|
|
|
|
enum ds278x_num_id {
|
|
DS2782 = 0,
|
|
DS2786,
|
|
};
|
|
|
|
static struct ds278x_battery_ops ds278x_ops[] = {
|
|
[DS2782] = {
|
|
.get_battery_current = ds2782_get_current,
|
|
.get_battery_voltage = ds2782_get_voltage,
|
|
.get_battery_capacity = ds2782_get_capacity,
|
|
},
|
|
[DS2786] = {
|
|
.get_battery_current = ds2786_get_current,
|
|
.get_battery_voltage = ds2786_get_voltage,
|
|
.get_battery_capacity = ds2786_get_capacity,
|
|
}
|
|
};
|
|
|
|
static int ds278x_battery_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct ds278x_platform_data *pdata = client->dev.platform_data;
|
|
struct ds278x_info *info;
|
|
int ret;
|
|
int num;
|
|
|
|
/*
|
|
* ds2786 should have the sense resistor value set
|
|
* in the platform data
|
|
*/
|
|
if (id->driver_data == DS2786 && !pdata) {
|
|
dev_err(&client->dev, "missing platform data for ds2786\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Get an ID for this battery */
|
|
mutex_lock(&battery_lock);
|
|
ret = idr_alloc(&battery_id, client, 0, 0, GFP_KERNEL);
|
|
mutex_unlock(&battery_lock);
|
|
if (ret < 0)
|
|
goto fail_id;
|
|
num = ret;
|
|
|
|
info = kzalloc(sizeof(*info), GFP_KERNEL);
|
|
if (!info) {
|
|
ret = -ENOMEM;
|
|
goto fail_info;
|
|
}
|
|
|
|
info->battery.name = kasprintf(GFP_KERNEL, "%s-%d", client->name, num);
|
|
if (!info->battery.name) {
|
|
ret = -ENOMEM;
|
|
goto fail_name;
|
|
}
|
|
|
|
if (id->driver_data == DS2786)
|
|
info->rsns = pdata->rsns;
|
|
|
|
i2c_set_clientdata(client, info);
|
|
info->client = client;
|
|
info->id = num;
|
|
info->ops = &ds278x_ops[id->driver_data];
|
|
ds278x_power_supply_init(&info->battery);
|
|
|
|
info->capacity = 100;
|
|
info->status = POWER_SUPPLY_STATUS_FULL;
|
|
|
|
INIT_DELAYED_WORK(&info->bat_work, ds278x_bat_work);
|
|
|
|
ret = power_supply_register(&client->dev, &info->battery);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to register battery\n");
|
|
goto fail_register;
|
|
} else {
|
|
schedule_delayed_work(&info->bat_work, DS278x_DELAY);
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail_register:
|
|
kfree(info->battery.name);
|
|
fail_name:
|
|
kfree(info);
|
|
fail_info:
|
|
mutex_lock(&battery_lock);
|
|
idr_remove(&battery_id, num);
|
|
mutex_unlock(&battery_lock);
|
|
fail_id:
|
|
return ret;
|
|
}
|
|
|
|
static const struct i2c_device_id ds278x_id[] = {
|
|
{"ds2782", DS2782},
|
|
{"ds2786", DS2786},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ds278x_id);
|
|
|
|
static struct i2c_driver ds278x_battery_driver = {
|
|
.driver = {
|
|
.name = "ds2782-battery",
|
|
.pm = &ds278x_battery_pm_ops,
|
|
},
|
|
.probe = ds278x_battery_probe,
|
|
.remove = ds278x_battery_remove,
|
|
.id_table = ds278x_id,
|
|
};
|
|
module_i2c_driver(ds278x_battery_driver);
|
|
|
|
MODULE_AUTHOR("Ryan Mallon");
|
|
MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver");
|
|
MODULE_LICENSE("GPL");
|