475 строки
13 KiB
C
475 строки
13 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
//
|
|
// IXP4 GPIO driver
|
|
// Copyright (C) 2019 Linus Walleij <linus.walleij@linaro.org>
|
|
//
|
|
// based on previous work and know-how from:
|
|
// Deepak Saxena <dsaxena@plexity.net>
|
|
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/io.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/irqchip.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/bitops.h>
|
|
/* Include that go away with DT transition */
|
|
#include <linux/irqchip/irq-ixp4xx.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
|
|
#define IXP4XX_REG_GPOUT 0x00
|
|
#define IXP4XX_REG_GPOE 0x04
|
|
#define IXP4XX_REG_GPIN 0x08
|
|
#define IXP4XX_REG_GPIS 0x0C
|
|
#define IXP4XX_REG_GPIT1 0x10
|
|
#define IXP4XX_REG_GPIT2 0x14
|
|
#define IXP4XX_REG_GPCLK 0x18
|
|
#define IXP4XX_REG_GPDBSEL 0x1C
|
|
|
|
/*
|
|
* The hardware uses 3 bits to indicate interrupt "style".
|
|
* we clear and set these three bits accordingly. The lower 24
|
|
* bits in two registers (GPIT1 and GPIT2) are used to set up
|
|
* the style for 8 lines each for a total of 16 GPIO lines.
|
|
*/
|
|
#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH 0x0
|
|
#define IXP4XX_GPIO_STYLE_ACTIVE_LOW 0x1
|
|
#define IXP4XX_GPIO_STYLE_RISING_EDGE 0x2
|
|
#define IXP4XX_GPIO_STYLE_FALLING_EDGE 0x3
|
|
#define IXP4XX_GPIO_STYLE_TRANSITIONAL 0x4
|
|
#define IXP4XX_GPIO_STYLE_MASK GENMASK(2, 0)
|
|
#define IXP4XX_GPIO_STYLE_SIZE 3
|
|
|
|
/**
|
|
* struct ixp4xx_gpio - IXP4 GPIO state container
|
|
* @dev: containing device for this instance
|
|
* @fwnode: the fwnode for this GPIO chip
|
|
* @gc: gpiochip for this instance
|
|
* @domain: irqdomain for this chip instance
|
|
* @base: remapped I/O-memory base
|
|
* @irq_edge: Each bit represents an IRQ: 1: edge-triggered,
|
|
* 0: level triggered
|
|
*/
|
|
struct ixp4xx_gpio {
|
|
struct device *dev;
|
|
struct fwnode_handle *fwnode;
|
|
struct gpio_chip gc;
|
|
struct irq_domain *domain;
|
|
void __iomem *base;
|
|
unsigned long long irq_edge;
|
|
};
|
|
|
|
/**
|
|
* struct ixp4xx_gpio_map - IXP4 GPIO to parent IRQ map
|
|
* @gpio_offset: offset of the IXP4 GPIO line
|
|
* @parent_hwirq: hwirq on the parent IRQ controller
|
|
*/
|
|
struct ixp4xx_gpio_map {
|
|
int gpio_offset;
|
|
int parent_hwirq;
|
|
};
|
|
|
|
/* GPIO lines 0..12 have corresponding IRQs, GPIOs 13..15 have no IRQs */
|
|
const struct ixp4xx_gpio_map ixp4xx_gpiomap[] = {
|
|
{ .gpio_offset = 0, .parent_hwirq = 6 },
|
|
{ .gpio_offset = 1, .parent_hwirq = 7 },
|
|
{ .gpio_offset = 2, .parent_hwirq = 19 },
|
|
{ .gpio_offset = 3, .parent_hwirq = 20 },
|
|
{ .gpio_offset = 4, .parent_hwirq = 21 },
|
|
{ .gpio_offset = 5, .parent_hwirq = 22 },
|
|
{ .gpio_offset = 6, .parent_hwirq = 23 },
|
|
{ .gpio_offset = 7, .parent_hwirq = 24 },
|
|
{ .gpio_offset = 8, .parent_hwirq = 25 },
|
|
{ .gpio_offset = 9, .parent_hwirq = 26 },
|
|
{ .gpio_offset = 10, .parent_hwirq = 27 },
|
|
{ .gpio_offset = 11, .parent_hwirq = 28 },
|
|
{ .gpio_offset = 12, .parent_hwirq = 29 },
|
|
};
|
|
|
|
static void ixp4xx_gpio_irq_ack(struct irq_data *d)
|
|
{
|
|
struct ixp4xx_gpio *g = irq_data_get_irq_chip_data(d);
|
|
|
|
__raw_writel(BIT(d->hwirq), g->base + IXP4XX_REG_GPIS);
|
|
}
|
|
|
|
static void ixp4xx_gpio_irq_unmask(struct irq_data *d)
|
|
{
|
|
struct ixp4xx_gpio *g = irq_data_get_irq_chip_data(d);
|
|
|
|
/* ACK when unmasking if not edge-triggered */
|
|
if (!(g->irq_edge & BIT(d->hwirq)))
|
|
ixp4xx_gpio_irq_ack(d);
|
|
|
|
irq_chip_unmask_parent(d);
|
|
}
|
|
|
|
static int ixp4xx_gpio_irq_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
struct ixp4xx_gpio *g = irq_data_get_irq_chip_data(d);
|
|
int line = d->hwirq;
|
|
unsigned long flags;
|
|
u32 int_style;
|
|
u32 int_reg;
|
|
u32 val;
|
|
|
|
switch (type) {
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
|
|
g->irq_edge |= BIT(d->hwirq);
|
|
break;
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
|
|
g->irq_edge |= BIT(d->hwirq);
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
|
|
g->irq_edge |= BIT(d->hwirq);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
irq_set_handler_locked(d, handle_level_irq);
|
|
int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
|
|
g->irq_edge &= ~BIT(d->hwirq);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
irq_set_handler_locked(d, handle_level_irq);
|
|
int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
|
|
g->irq_edge &= ~BIT(d->hwirq);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (line >= 8) {
|
|
/* pins 8-15 */
|
|
line -= 8;
|
|
int_reg = IXP4XX_REG_GPIT2;
|
|
} else {
|
|
/* pins 0-7 */
|
|
int_reg = IXP4XX_REG_GPIT1;
|
|
}
|
|
|
|
spin_lock_irqsave(&g->gc.bgpio_lock, flags);
|
|
|
|
/* Clear the style for the appropriate pin */
|
|
val = __raw_readl(g->base + int_reg);
|
|
val &= ~(IXP4XX_GPIO_STYLE_MASK << (line * IXP4XX_GPIO_STYLE_SIZE));
|
|
__raw_writel(val, g->base + int_reg);
|
|
|
|
__raw_writel(BIT(line), g->base + IXP4XX_REG_GPIS);
|
|
|
|
/* Set the new style */
|
|
val = __raw_readl(g->base + int_reg);
|
|
val |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE));
|
|
__raw_writel(val, g->base + int_reg);
|
|
|
|
/* Force-configure this line as an input */
|
|
val = __raw_readl(g->base + IXP4XX_REG_GPOE);
|
|
val |= BIT(d->hwirq);
|
|
__raw_writel(val, g->base + IXP4XX_REG_GPOE);
|
|
|
|
spin_unlock_irqrestore(&g->gc.bgpio_lock, flags);
|
|
|
|
/* This parent only accept level high (asserted) */
|
|
return irq_chip_set_type_parent(d, IRQ_TYPE_LEVEL_HIGH);
|
|
}
|
|
|
|
static struct irq_chip ixp4xx_gpio_irqchip = {
|
|
.name = "IXP4GPIO",
|
|
.irq_ack = ixp4xx_gpio_irq_ack,
|
|
.irq_mask = irq_chip_mask_parent,
|
|
.irq_unmask = ixp4xx_gpio_irq_unmask,
|
|
.irq_set_type = ixp4xx_gpio_irq_set_type,
|
|
};
|
|
|
|
static int ixp4xx_gpio_to_irq(struct gpio_chip *gc, unsigned int offset)
|
|
{
|
|
struct ixp4xx_gpio *g = gpiochip_get_data(gc);
|
|
struct irq_fwspec fwspec;
|
|
|
|
fwspec.fwnode = g->fwnode;
|
|
fwspec.param_count = 2;
|
|
fwspec.param[0] = offset;
|
|
fwspec.param[1] = IRQ_TYPE_NONE;
|
|
|
|
return irq_create_fwspec_mapping(&fwspec);
|
|
}
|
|
|
|
static int ixp4xx_gpio_irq_domain_translate(struct irq_domain *domain,
|
|
struct irq_fwspec *fwspec,
|
|
unsigned long *hwirq,
|
|
unsigned int *type)
|
|
{
|
|
int ret;
|
|
|
|
/* We support standard DT translation */
|
|
if (is_of_node(fwspec->fwnode) && fwspec->param_count == 2) {
|
|
return irq_domain_translate_twocell(domain, fwspec,
|
|
hwirq, type);
|
|
}
|
|
|
|
/* This goes away when we transition to DT */
|
|
if (is_fwnode_irqchip(fwspec->fwnode)) {
|
|
ret = irq_domain_translate_twocell(domain, fwspec,
|
|
hwirq, type);
|
|
if (ret)
|
|
return ret;
|
|
WARN_ON(*type == IRQ_TYPE_NONE);
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int ixp4xx_gpio_irq_domain_alloc(struct irq_domain *d,
|
|
unsigned int irq, unsigned int nr_irqs,
|
|
void *data)
|
|
{
|
|
struct ixp4xx_gpio *g = d->host_data;
|
|
irq_hw_number_t hwirq;
|
|
unsigned int type = IRQ_TYPE_NONE;
|
|
struct irq_fwspec *fwspec = data;
|
|
int ret;
|
|
int i;
|
|
|
|
ret = ixp4xx_gpio_irq_domain_translate(d, fwspec, &hwirq, &type);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev_dbg(g->dev, "allocate IRQ %d..%d, hwirq %lu..%lu\n",
|
|
irq, irq + nr_irqs - 1,
|
|
hwirq, hwirq + nr_irqs - 1);
|
|
|
|
for (i = 0; i < nr_irqs; i++) {
|
|
struct irq_fwspec parent_fwspec;
|
|
const struct ixp4xx_gpio_map *map;
|
|
int j;
|
|
|
|
/* Not all lines support IRQs */
|
|
for (j = 0; j < ARRAY_SIZE(ixp4xx_gpiomap); j++) {
|
|
map = &ixp4xx_gpiomap[j];
|
|
if (map->gpio_offset == hwirq)
|
|
break;
|
|
}
|
|
if (j == ARRAY_SIZE(ixp4xx_gpiomap)) {
|
|
dev_err(g->dev, "can't look up hwirq %lu\n", hwirq);
|
|
return -EINVAL;
|
|
}
|
|
dev_dbg(g->dev, "found parent hwirq %u\n", map->parent_hwirq);
|
|
|
|
/*
|
|
* We set handle_bad_irq because the .set_type() should
|
|
* always be invoked and set the right type of handler.
|
|
*/
|
|
irq_domain_set_info(d,
|
|
irq + i,
|
|
hwirq + i,
|
|
&ixp4xx_gpio_irqchip,
|
|
g,
|
|
handle_bad_irq,
|
|
NULL, NULL);
|
|
irq_set_probe(irq + i);
|
|
|
|
/*
|
|
* Create a IRQ fwspec to send up to the parent irqdomain:
|
|
* specify the hwirq we address on the parent and tie it
|
|
* all together up the chain.
|
|
*/
|
|
parent_fwspec.fwnode = d->parent->fwnode;
|
|
parent_fwspec.param_count = 2;
|
|
parent_fwspec.param[0] = map->parent_hwirq;
|
|
/* This parent only handles asserted level IRQs */
|
|
parent_fwspec.param[1] = IRQ_TYPE_LEVEL_HIGH;
|
|
dev_dbg(g->dev, "alloc_irqs_parent for %d parent hwirq %d\n",
|
|
irq + i, map->parent_hwirq);
|
|
ret = irq_domain_alloc_irqs_parent(d, irq + i, 1,
|
|
&parent_fwspec);
|
|
if (ret)
|
|
dev_err(g->dev,
|
|
"failed to allocate parent hwirq %d for hwirq %lu\n",
|
|
map->parent_hwirq, hwirq);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct irq_domain_ops ixp4xx_gpio_irqdomain_ops = {
|
|
.translate = ixp4xx_gpio_irq_domain_translate,
|
|
.alloc = ixp4xx_gpio_irq_domain_alloc,
|
|
.free = irq_domain_free_irqs_common,
|
|
};
|
|
|
|
static int ixp4xx_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
unsigned long flags;
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = dev->of_node;
|
|
struct irq_domain *parent;
|
|
struct resource *res;
|
|
struct ixp4xx_gpio *g;
|
|
int ret;
|
|
int i;
|
|
|
|
g = devm_kzalloc(dev, sizeof(*g), GFP_KERNEL);
|
|
if (!g)
|
|
return -ENOMEM;
|
|
g->dev = dev;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
g->base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(g->base)) {
|
|
dev_err(dev, "ioremap error\n");
|
|
return PTR_ERR(g->base);
|
|
}
|
|
|
|
/*
|
|
* Make sure GPIO 14 and 15 are NOT used as clocks but GPIO on
|
|
* specific machines.
|
|
*/
|
|
if (machine_is_dsmg600() || machine_is_nas100d())
|
|
__raw_writel(0x0, g->base + IXP4XX_REG_GPCLK);
|
|
|
|
/*
|
|
* This is a very special big-endian ARM issue: when the IXP4xx is
|
|
* run in big endian mode, all registers in the machine are switched
|
|
* around to the CPU-native endianness. As you see mostly in the
|
|
* driver we use __raw_readl()/__raw_writel() to access the registers
|
|
* in the appropriate order. With the GPIO library we need to specify
|
|
* byte order explicitly, so this flag needs to be set when compiling
|
|
* for big endian.
|
|
*/
|
|
#if defined(CONFIG_CPU_BIG_ENDIAN)
|
|
flags = BGPIOF_BIG_ENDIAN_BYTE_ORDER;
|
|
#else
|
|
flags = 0;
|
|
#endif
|
|
|
|
/* Populate and register gpio chip */
|
|
ret = bgpio_init(&g->gc, dev, 4,
|
|
g->base + IXP4XX_REG_GPIN,
|
|
g->base + IXP4XX_REG_GPOUT,
|
|
NULL,
|
|
NULL,
|
|
g->base + IXP4XX_REG_GPOE,
|
|
flags);
|
|
if (ret) {
|
|
dev_err(dev, "unable to init generic GPIO\n");
|
|
return ret;
|
|
}
|
|
g->gc.to_irq = ixp4xx_gpio_to_irq;
|
|
g->gc.ngpio = 16;
|
|
g->gc.label = "IXP4XX_GPIO_CHIP";
|
|
/*
|
|
* TODO: when we have migrated to device tree and all GPIOs
|
|
* are fetched using phandles, set this to -1 to get rid of
|
|
* the fixed gpiochip base.
|
|
*/
|
|
g->gc.base = 0;
|
|
g->gc.parent = &pdev->dev;
|
|
g->gc.owner = THIS_MODULE;
|
|
|
|
ret = devm_gpiochip_add_data(dev, &g->gc, g);
|
|
if (ret) {
|
|
dev_err(dev, "failed to add SoC gpiochip\n");
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* When we convert to device tree we will simply look up the
|
|
* parent irqdomain using irq_find_host(parent) as parent comes
|
|
* from IRQCHIP_DECLARE(), then use of_node_to_fwnode() to get
|
|
* the fwnode. For now we need this boardfile style code.
|
|
*/
|
|
if (np) {
|
|
struct device_node *irq_parent;
|
|
|
|
irq_parent = of_irq_find_parent(np);
|
|
if (!irq_parent) {
|
|
dev_err(dev, "no IRQ parent node\n");
|
|
return -ENODEV;
|
|
}
|
|
parent = irq_find_host(irq_parent);
|
|
if (!parent) {
|
|
dev_err(dev, "no IRQ parent domain\n");
|
|
return -ENODEV;
|
|
}
|
|
g->fwnode = of_node_to_fwnode(np);
|
|
} else {
|
|
parent = ixp4xx_get_irq_domain();
|
|
g->fwnode = irq_domain_alloc_fwnode(g->base);
|
|
if (!g->fwnode) {
|
|
dev_err(dev, "no domain base\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
g->domain = irq_domain_create_hierarchy(parent,
|
|
IRQ_DOMAIN_FLAG_HIERARCHY,
|
|
ARRAY_SIZE(ixp4xx_gpiomap),
|
|
g->fwnode,
|
|
&ixp4xx_gpio_irqdomain_ops,
|
|
g);
|
|
if (!g->domain) {
|
|
irq_domain_free_fwnode(g->fwnode);
|
|
dev_err(dev, "no hierarchical irq domain\n");
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* After adding OF support, this is no longer needed: irqs
|
|
* will be allocated for the respective fwnodes.
|
|
*/
|
|
if (!np) {
|
|
for (i = 0; i < ARRAY_SIZE(ixp4xx_gpiomap); i++) {
|
|
const struct ixp4xx_gpio_map *map = &ixp4xx_gpiomap[i];
|
|
struct irq_fwspec fwspec;
|
|
|
|
fwspec.fwnode = g->fwnode;
|
|
/* This is the hwirq for the GPIO line side of things */
|
|
fwspec.param[0] = map->gpio_offset;
|
|
fwspec.param[1] = IRQ_TYPE_EDGE_RISING;
|
|
fwspec.param_count = 2;
|
|
ret = __irq_domain_alloc_irqs(g->domain,
|
|
-1, /* just pick something */
|
|
1,
|
|
NUMA_NO_NODE,
|
|
&fwspec,
|
|
false,
|
|
NULL);
|
|
if (ret < 0) {
|
|
irq_domain_free_fwnode(g->fwnode);
|
|
dev_err(dev,
|
|
"can not allocate irq for GPIO line %d parent hwirq %d in hierarchy domain: %d\n",
|
|
map->gpio_offset, map->parent_hwirq,
|
|
ret);
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
|
|
platform_set_drvdata(pdev, g);
|
|
dev_info(dev, "IXP4 GPIO @%p registered\n", g->base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id ixp4xx_gpio_of_match[] = {
|
|
{
|
|
.compatible = "intel,ixp4xx-gpio",
|
|
},
|
|
{},
|
|
};
|
|
|
|
|
|
static struct platform_driver ixp4xx_gpio_driver = {
|
|
.driver = {
|
|
.name = "ixp4xx-gpio",
|
|
.of_match_table = of_match_ptr(ixp4xx_gpio_of_match),
|
|
},
|
|
.probe = ixp4xx_gpio_probe,
|
|
};
|
|
builtin_platform_driver(ixp4xx_gpio_driver);
|