526 строки
13 KiB
C
526 строки
13 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* linux/arch/mips/jz4740/board-qi_lb60.c
|
|
*
|
|
* QI_LB60 board support
|
|
*
|
|
* Copyright (c) 2009 Qi Hardware inc.,
|
|
* Author: Xiangfu Liu <xiangfu@qi-hardware.com>
|
|
* Copyright 2010, Lars-Peter Clausen <lars@metafoo.de>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/gpio/machine.h>
|
|
|
|
#include <linux/input.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/input/matrix_keypad.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/spi_gpio.h>
|
|
#include <linux/pinctrl/machine.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/power/jz4740-battery.h>
|
|
#include <linux/power/gpio-charger.h>
|
|
#include <linux/pwm.h>
|
|
|
|
#include <linux/platform_data/jz4740/jz4740_nand.h>
|
|
|
|
#include <asm/mach-jz4740/gpio.h>
|
|
#include <asm/mach-jz4740/jz4740_fb.h>
|
|
#include <asm/mach-jz4740/jz4740_mmc.h>
|
|
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/regulator/machine.h>
|
|
|
|
#include <asm/mach-jz4740/platform.h>
|
|
|
|
#include "clock.h"
|
|
|
|
/* GPIOs */
|
|
#define QI_LB60_GPIO_KEYOUT(x) (JZ_GPIO_PORTC(10) + (x))
|
|
#define QI_LB60_GPIO_KEYIN(x) (JZ_GPIO_PORTD(18) + (x))
|
|
#define QI_LB60_GPIO_KEYIN8 JZ_GPIO_PORTD(26)
|
|
|
|
/* NAND */
|
|
|
|
/* Early prototypes of the QI LB60 had only 1GB of NAND.
|
|
* In order to support these devices as well the partition and ecc layout is
|
|
* initialized depending on the NAND size */
|
|
static struct mtd_partition qi_lb60_partitions_1gb[] = {
|
|
{
|
|
.name = "NAND BOOT partition",
|
|
.offset = 0 * 0x100000,
|
|
.size = 4 * 0x100000,
|
|
},
|
|
{
|
|
.name = "NAND KERNEL partition",
|
|
.offset = 4 * 0x100000,
|
|
.size = 4 * 0x100000,
|
|
},
|
|
{
|
|
.name = "NAND ROOTFS partition",
|
|
.offset = 8 * 0x100000,
|
|
.size = (504 + 512) * 0x100000,
|
|
},
|
|
};
|
|
|
|
static struct mtd_partition qi_lb60_partitions_2gb[] = {
|
|
{
|
|
.name = "NAND BOOT partition",
|
|
.offset = 0 * 0x100000,
|
|
.size = 4 * 0x100000,
|
|
},
|
|
{
|
|
.name = "NAND KERNEL partition",
|
|
.offset = 4 * 0x100000,
|
|
.size = 4 * 0x100000,
|
|
},
|
|
{
|
|
.name = "NAND ROOTFS partition",
|
|
.offset = 8 * 0x100000,
|
|
.size = (504 + 512 + 1024) * 0x100000,
|
|
},
|
|
};
|
|
|
|
static int qi_lb60_ooblayout_ecc(struct mtd_info *mtd, int section,
|
|
struct mtd_oob_region *oobregion)
|
|
{
|
|
if (section)
|
|
return -ERANGE;
|
|
|
|
oobregion->length = 36;
|
|
oobregion->offset = 6;
|
|
|
|
if (mtd->oobsize == 128) {
|
|
oobregion->length *= 2;
|
|
oobregion->offset *= 2;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int qi_lb60_ooblayout_free(struct mtd_info *mtd, int section,
|
|
struct mtd_oob_region *oobregion)
|
|
{
|
|
int eccbytes = 36, eccoff = 6;
|
|
|
|
if (section > 1)
|
|
return -ERANGE;
|
|
|
|
if (mtd->oobsize == 128) {
|
|
eccbytes *= 2;
|
|
eccoff *= 2;
|
|
}
|
|
|
|
if (!section) {
|
|
oobregion->offset = 2;
|
|
oobregion->length = eccoff - 2;
|
|
} else {
|
|
oobregion->offset = eccoff + eccbytes;
|
|
oobregion->length = mtd->oobsize - oobregion->offset;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct mtd_ooblayout_ops qi_lb60_ooblayout_ops = {
|
|
.ecc = qi_lb60_ooblayout_ecc,
|
|
.free = qi_lb60_ooblayout_free,
|
|
};
|
|
|
|
static void qi_lb60_nand_ident(struct platform_device *pdev,
|
|
struct mtd_info *mtd, struct mtd_partition **partitions,
|
|
int *num_partitions)
|
|
{
|
|
struct nand_chip *chip = mtd_to_nand(mtd);
|
|
|
|
if (chip->page_shift == 12) {
|
|
*partitions = qi_lb60_partitions_2gb;
|
|
*num_partitions = ARRAY_SIZE(qi_lb60_partitions_2gb);
|
|
} else {
|
|
*partitions = qi_lb60_partitions_1gb;
|
|
*num_partitions = ARRAY_SIZE(qi_lb60_partitions_1gb);
|
|
}
|
|
|
|
mtd_set_ooblayout(mtd, &qi_lb60_ooblayout_ops);
|
|
}
|
|
|
|
static struct jz_nand_platform_data qi_lb60_nand_pdata = {
|
|
.ident_callback = qi_lb60_nand_ident,
|
|
.banks = { 1 },
|
|
};
|
|
|
|
static struct gpiod_lookup_table qi_lb60_nand_gpio_table = {
|
|
.dev_id = "jz4740-nand.0",
|
|
.table = {
|
|
GPIO_LOOKUP("GPIOC", 30, "busy", 0),
|
|
{ },
|
|
},
|
|
};
|
|
|
|
|
|
/* Keyboard*/
|
|
|
|
#define KEY_QI_QI KEY_F13
|
|
#define KEY_QI_UPRED KEY_RIGHTALT
|
|
#define KEY_QI_VOLUP KEY_VOLUMEUP
|
|
#define KEY_QI_VOLDOWN KEY_VOLUMEDOWN
|
|
#define KEY_QI_FN KEY_LEFTCTRL
|
|
|
|
static const uint32_t qi_lb60_keymap[] = {
|
|
KEY(0, 0, KEY_F1), /* S2 */
|
|
KEY(0, 1, KEY_F2), /* S3 */
|
|
KEY(0, 2, KEY_F3), /* S4 */
|
|
KEY(0, 3, KEY_F4), /* S5 */
|
|
KEY(0, 4, KEY_F5), /* S6 */
|
|
KEY(0, 5, KEY_F6), /* S7 */
|
|
KEY(0, 6, KEY_F7), /* S8 */
|
|
|
|
KEY(1, 0, KEY_Q), /* S10 */
|
|
KEY(1, 1, KEY_W), /* S11 */
|
|
KEY(1, 2, KEY_E), /* S12 */
|
|
KEY(1, 3, KEY_R), /* S13 */
|
|
KEY(1, 4, KEY_T), /* S14 */
|
|
KEY(1, 5, KEY_Y), /* S15 */
|
|
KEY(1, 6, KEY_U), /* S16 */
|
|
KEY(1, 7, KEY_I), /* S17 */
|
|
KEY(2, 0, KEY_A), /* S18 */
|
|
KEY(2, 1, KEY_S), /* S19 */
|
|
KEY(2, 2, KEY_D), /* S20 */
|
|
KEY(2, 3, KEY_F), /* S21 */
|
|
KEY(2, 4, KEY_G), /* S22 */
|
|
KEY(2, 5, KEY_H), /* S23 */
|
|
KEY(2, 6, KEY_J), /* S24 */
|
|
KEY(2, 7, KEY_K), /* S25 */
|
|
KEY(3, 0, KEY_ESC), /* S26 */
|
|
KEY(3, 1, KEY_Z), /* S27 */
|
|
KEY(3, 2, KEY_X), /* S28 */
|
|
KEY(3, 3, KEY_C), /* S29 */
|
|
KEY(3, 4, KEY_V), /* S30 */
|
|
KEY(3, 5, KEY_B), /* S31 */
|
|
KEY(3, 6, KEY_N), /* S32 */
|
|
KEY(3, 7, KEY_M), /* S33 */
|
|
KEY(4, 0, KEY_TAB), /* S34 */
|
|
KEY(4, 1, KEY_CAPSLOCK), /* S35 */
|
|
KEY(4, 2, KEY_BACKSLASH), /* S36 */
|
|
KEY(4, 3, KEY_APOSTROPHE), /* S37 */
|
|
KEY(4, 4, KEY_COMMA), /* S38 */
|
|
KEY(4, 5, KEY_DOT), /* S39 */
|
|
KEY(4, 6, KEY_SLASH), /* S40 */
|
|
KEY(4, 7, KEY_UP), /* S41 */
|
|
KEY(5, 0, KEY_O), /* S42 */
|
|
KEY(5, 1, KEY_L), /* S43 */
|
|
KEY(5, 2, KEY_EQUAL), /* S44 */
|
|
KEY(5, 3, KEY_QI_UPRED), /* S45 */
|
|
KEY(5, 4, KEY_SPACE), /* S46 */
|
|
KEY(5, 5, KEY_QI_QI), /* S47 */
|
|
KEY(5, 6, KEY_RIGHTCTRL), /* S48 */
|
|
KEY(5, 7, KEY_LEFT), /* S49 */
|
|
KEY(6, 0, KEY_F8), /* S50 */
|
|
KEY(6, 1, KEY_P), /* S51 */
|
|
KEY(6, 2, KEY_BACKSPACE),/* S52 */
|
|
KEY(6, 3, KEY_ENTER), /* S53 */
|
|
KEY(6, 4, KEY_QI_VOLUP), /* S54 */
|
|
KEY(6, 5, KEY_QI_VOLDOWN), /* S55 */
|
|
KEY(6, 6, KEY_DOWN), /* S56 */
|
|
KEY(6, 7, KEY_RIGHT), /* S57 */
|
|
|
|
KEY(7, 0, KEY_LEFTSHIFT), /* S58 */
|
|
KEY(7, 1, KEY_LEFTALT), /* S59 */
|
|
KEY(7, 2, KEY_QI_FN), /* S60 */
|
|
};
|
|
|
|
static const struct matrix_keymap_data qi_lb60_keymap_data = {
|
|
.keymap = qi_lb60_keymap,
|
|
.keymap_size = ARRAY_SIZE(qi_lb60_keymap),
|
|
};
|
|
|
|
static const unsigned int qi_lb60_keypad_cols[] = {
|
|
QI_LB60_GPIO_KEYOUT(0),
|
|
QI_LB60_GPIO_KEYOUT(1),
|
|
QI_LB60_GPIO_KEYOUT(2),
|
|
QI_LB60_GPIO_KEYOUT(3),
|
|
QI_LB60_GPIO_KEYOUT(4),
|
|
QI_LB60_GPIO_KEYOUT(5),
|
|
QI_LB60_GPIO_KEYOUT(6),
|
|
QI_LB60_GPIO_KEYOUT(7),
|
|
};
|
|
|
|
static const unsigned int qi_lb60_keypad_rows[] = {
|
|
QI_LB60_GPIO_KEYIN(0),
|
|
QI_LB60_GPIO_KEYIN(1),
|
|
QI_LB60_GPIO_KEYIN(2),
|
|
QI_LB60_GPIO_KEYIN(3),
|
|
QI_LB60_GPIO_KEYIN(4),
|
|
QI_LB60_GPIO_KEYIN(5),
|
|
QI_LB60_GPIO_KEYIN(6),
|
|
QI_LB60_GPIO_KEYIN8,
|
|
};
|
|
|
|
static struct matrix_keypad_platform_data qi_lb60_pdata = {
|
|
.keymap_data = &qi_lb60_keymap_data,
|
|
.col_gpios = qi_lb60_keypad_cols,
|
|
.row_gpios = qi_lb60_keypad_rows,
|
|
.num_col_gpios = ARRAY_SIZE(qi_lb60_keypad_cols),
|
|
.num_row_gpios = ARRAY_SIZE(qi_lb60_keypad_rows),
|
|
.col_scan_delay_us = 10,
|
|
.debounce_ms = 10,
|
|
.wakeup = 1,
|
|
.active_low = 1,
|
|
};
|
|
|
|
static struct platform_device qi_lb60_keypad = {
|
|
.name = "matrix-keypad",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &qi_lb60_pdata,
|
|
},
|
|
};
|
|
|
|
/* Display */
|
|
static struct fb_videomode qi_lb60_video_modes[] = {
|
|
{
|
|
.name = "320x240",
|
|
.xres = 320,
|
|
.yres = 240,
|
|
.refresh = 30,
|
|
.left_margin = 140,
|
|
.right_margin = 273,
|
|
.upper_margin = 20,
|
|
.lower_margin = 2,
|
|
.hsync_len = 1,
|
|
.vsync_len = 1,
|
|
.sync = 0,
|
|
.vmode = FB_VMODE_NONINTERLACED,
|
|
},
|
|
};
|
|
|
|
static struct jz4740_fb_platform_data qi_lb60_fb_pdata = {
|
|
.width = 60,
|
|
.height = 45,
|
|
.num_modes = ARRAY_SIZE(qi_lb60_video_modes),
|
|
.modes = qi_lb60_video_modes,
|
|
.bpp = 24,
|
|
.lcd_type = JZ_LCD_TYPE_8BIT_SERIAL,
|
|
.pixclk_falling_edge = 1,
|
|
};
|
|
|
|
struct spi_gpio_platform_data qi_lb60_spigpio_platform_data = {
|
|
.num_chipselect = 1,
|
|
};
|
|
|
|
static struct platform_device qi_lb60_spigpio_device = {
|
|
.name = "spi_gpio",
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &qi_lb60_spigpio_platform_data,
|
|
},
|
|
};
|
|
|
|
static struct gpiod_lookup_table qi_lb60_spigpio_gpio_table = {
|
|
.dev_id = "spi_gpio",
|
|
.table = {
|
|
GPIO_LOOKUP("GPIOC", 23,
|
|
"sck", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("GPIOC", 22,
|
|
"mosi", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("GPIOC", 21,
|
|
"cs", GPIO_ACTIVE_HIGH),
|
|
{ },
|
|
},
|
|
};
|
|
|
|
static struct spi_board_info qi_lb60_spi_board_info[] = {
|
|
{
|
|
.modalias = "ili8960",
|
|
.chip_select = 0,
|
|
.bus_num = 1,
|
|
.max_speed_hz = 30 * 1000,
|
|
.mode = SPI_3WIRE,
|
|
},
|
|
};
|
|
|
|
/* Battery */
|
|
static struct jz_battery_platform_data qi_lb60_battery_pdata = {
|
|
.gpio_charge = JZ_GPIO_PORTC(27),
|
|
.gpio_charge_active_low = 1,
|
|
.info = {
|
|
.name = "battery",
|
|
.technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
|
|
.voltage_max_design = 4200000,
|
|
.voltage_min_design = 3600000,
|
|
},
|
|
};
|
|
|
|
/* GPIO Key: power */
|
|
static struct gpio_keys_button qi_lb60_gpio_keys_buttons[] = {
|
|
[0] = {
|
|
.code = KEY_POWER,
|
|
.gpio = JZ_GPIO_PORTD(29),
|
|
.active_low = 1,
|
|
.desc = "Power",
|
|
.wakeup = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_platform_data qi_lb60_gpio_keys_data = {
|
|
.nbuttons = ARRAY_SIZE(qi_lb60_gpio_keys_buttons),
|
|
.buttons = qi_lb60_gpio_keys_buttons,
|
|
};
|
|
|
|
static struct platform_device qi_lb60_gpio_keys = {
|
|
.name = "gpio-keys",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &qi_lb60_gpio_keys_data,
|
|
}
|
|
};
|
|
|
|
static struct jz4740_mmc_platform_data qi_lb60_mmc_pdata = {
|
|
/* Intentionally left blank */
|
|
};
|
|
|
|
static struct gpiod_lookup_table qi_lb60_mmc_gpio_table = {
|
|
.dev_id = "jz4740-mmc.0",
|
|
.table = {
|
|
GPIO_LOOKUP("GPIOD", 0, "cd", GPIO_ACTIVE_HIGH),
|
|
GPIO_LOOKUP("GPIOD", 2, "power", GPIO_ACTIVE_LOW),
|
|
{ },
|
|
},
|
|
};
|
|
|
|
/* beeper */
|
|
static struct pwm_lookup qi_lb60_pwm_lookup[] = {
|
|
PWM_LOOKUP("jz4740-pwm", 4, "pwm-beeper", NULL, 0,
|
|
PWM_POLARITY_NORMAL),
|
|
};
|
|
|
|
static struct platform_device qi_lb60_pwm_beeper = {
|
|
.name = "pwm-beeper",
|
|
.id = -1,
|
|
};
|
|
|
|
/* charger */
|
|
static char *qi_lb60_batteries[] = {
|
|
"battery",
|
|
};
|
|
|
|
static struct gpio_charger_platform_data qi_lb60_charger_pdata = {
|
|
.name = "usb",
|
|
.type = POWER_SUPPLY_TYPE_USB,
|
|
.gpio = JZ_GPIO_PORTD(28),
|
|
.gpio_active_low = 1,
|
|
.supplied_to = qi_lb60_batteries,
|
|
.num_supplicants = ARRAY_SIZE(qi_lb60_batteries),
|
|
};
|
|
|
|
static struct platform_device qi_lb60_charger_device = {
|
|
.name = "gpio-charger",
|
|
.dev = {
|
|
.platform_data = &qi_lb60_charger_pdata,
|
|
},
|
|
};
|
|
|
|
/* audio */
|
|
static struct platform_device qi_lb60_audio_device = {
|
|
.name = "qi-lb60-audio",
|
|
.id = -1,
|
|
};
|
|
|
|
static struct gpiod_lookup_table qi_lb60_audio_gpio_table = {
|
|
.dev_id = "qi-lb60-audio",
|
|
.table = {
|
|
GPIO_LOOKUP("GPIOB", 29, "snd", 0),
|
|
GPIO_LOOKUP("GPIOD", 4, "amp", 0),
|
|
{ },
|
|
},
|
|
};
|
|
|
|
static struct platform_device *jz_platform_devices[] __initdata = {
|
|
&jz4740_udc_device,
|
|
&jz4740_udc_xceiv_device,
|
|
&jz4740_mmc_device,
|
|
&jz4740_nand_device,
|
|
&qi_lb60_keypad,
|
|
&qi_lb60_spigpio_device,
|
|
&jz4740_framebuffer_device,
|
|
&jz4740_pcm_device,
|
|
&jz4740_i2s_device,
|
|
&jz4740_codec_device,
|
|
&jz4740_adc_device,
|
|
&jz4740_pwm_device,
|
|
&jz4740_dma_device,
|
|
&qi_lb60_gpio_keys,
|
|
&qi_lb60_pwm_beeper,
|
|
&qi_lb60_charger_device,
|
|
&qi_lb60_audio_device,
|
|
};
|
|
|
|
static unsigned long pin_cfg_bias_disable[] = {
|
|
PIN_CONFIG_BIAS_DISABLE,
|
|
};
|
|
|
|
static struct pinctrl_map pin_map[] __initdata = {
|
|
/* NAND pin configuration */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("jz4740-nand",
|
|
"10010000.jz4740-pinctrl", "nand", "nand-cs1"),
|
|
|
|
/* fbdev pin configuration */
|
|
PIN_MAP_MUX_GROUP("jz4740-fb", PINCTRL_STATE_DEFAULT,
|
|
"10010000.jz4740-pinctrl", "lcd", "lcd-8bit"),
|
|
PIN_MAP_MUX_GROUP("jz4740-fb", PINCTRL_STATE_SLEEP,
|
|
"10010000.jz4740-pinctrl", "lcd", "lcd-no-pins"),
|
|
|
|
/* MMC pin configuration */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("jz4740-mmc.0",
|
|
"10010000.jz4740-pinctrl", "mmc", "mmc-1bit"),
|
|
PIN_MAP_MUX_GROUP_DEFAULT("jz4740-mmc.0",
|
|
"10010000.jz4740-pinctrl", "mmc", "mmc-4bit"),
|
|
PIN_MAP_CONFIGS_PIN_DEFAULT("jz4740-mmc.0",
|
|
"10010000.jz4740-pinctrl", "PD0", pin_cfg_bias_disable),
|
|
PIN_MAP_CONFIGS_PIN_DEFAULT("jz4740-mmc.0",
|
|
"10010000.jz4740-pinctrl", "PD2", pin_cfg_bias_disable),
|
|
|
|
/* PWM pin configuration */
|
|
PIN_MAP_MUX_GROUP_DEFAULT("jz4740-pwm",
|
|
"10010000.jz4740-pinctrl", "pwm4", "pwm4"),
|
|
};
|
|
|
|
|
|
static int __init qi_lb60_init_platform_devices(void)
|
|
{
|
|
jz4740_framebuffer_device.dev.platform_data = &qi_lb60_fb_pdata;
|
|
jz4740_nand_device.dev.platform_data = &qi_lb60_nand_pdata;
|
|
jz4740_adc_device.dev.platform_data = &qi_lb60_battery_pdata;
|
|
jz4740_mmc_device.dev.platform_data = &qi_lb60_mmc_pdata;
|
|
|
|
gpiod_add_lookup_table(&qi_lb60_audio_gpio_table);
|
|
gpiod_add_lookup_table(&qi_lb60_nand_gpio_table);
|
|
gpiod_add_lookup_table(&qi_lb60_spigpio_gpio_table);
|
|
gpiod_add_lookup_table(&qi_lb60_mmc_gpio_table);
|
|
|
|
spi_register_board_info(qi_lb60_spi_board_info,
|
|
ARRAY_SIZE(qi_lb60_spi_board_info));
|
|
|
|
pwm_add_table(qi_lb60_pwm_lookup, ARRAY_SIZE(qi_lb60_pwm_lookup));
|
|
pinctrl_register_mappings(pin_map, ARRAY_SIZE(pin_map));
|
|
|
|
return platform_add_devices(jz_platform_devices,
|
|
ARRAY_SIZE(jz_platform_devices));
|
|
|
|
}
|
|
|
|
static int __init qi_lb60_board_setup(void)
|
|
{
|
|
printk(KERN_INFO "Qi Hardware JZ4740 QI LB60 setup\n");
|
|
|
|
if (qi_lb60_init_platform_devices())
|
|
panic("Failed to initialize platform devices");
|
|
|
|
return 0;
|
|
}
|
|
arch_initcall(qi_lb60_board_setup);
|