WSL2-Linux-Kernel/include/linux/can/error.h

92 строки
4.4 KiB
C

/*
* linux/can/error.h
*
* Definitions of the CAN error frame to be filtered and passed to the user.
*
* Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
* Copyright (c) 2002-2007 Volkswagen Group Electronic Research
* All rights reserved.
*
*/
#ifndef CAN_ERROR_H
#define CAN_ERROR_H
#define CAN_ERR_DLC 8 /* dlc for error frames */
/* error class (mask) in can_id */
#define CAN_ERR_TX_TIMEOUT 0x00000001U /* TX timeout (by netdevice driver) */
#define CAN_ERR_LOSTARB 0x00000002U /* lost arbitration / data[0] */
#define CAN_ERR_CRTL 0x00000004U /* controller problems / data[1] */
#define CAN_ERR_PROT 0x00000008U /* protocol violations / data[2..3] */
#define CAN_ERR_TRX 0x00000010U /* transceiver status / data[4] */
#define CAN_ERR_ACK 0x00000020U /* received no ACK on transmission */
#define CAN_ERR_BUSOFF 0x00000040U /* bus off */
#define CAN_ERR_BUSERROR 0x00000080U /* bus error (may flood!) */
#define CAN_ERR_RESTARTED 0x00000100U /* controller restarted */
/* arbitration lost in bit ... / data[0] */
#define CAN_ERR_LOSTARB_UNSPEC 0x00 /* unspecified */
/* else bit number in bitstream */
/* error status of CAN-controller / data[1] */
#define CAN_ERR_CRTL_UNSPEC 0x00 /* unspecified */
#define CAN_ERR_CRTL_RX_OVERFLOW 0x01 /* RX buffer overflow */
#define CAN_ERR_CRTL_TX_OVERFLOW 0x02 /* TX buffer overflow */
#define CAN_ERR_CRTL_RX_WARNING 0x04 /* reached warning level for RX errors */
#define CAN_ERR_CRTL_TX_WARNING 0x08 /* reached warning level for TX errors */
#define CAN_ERR_CRTL_RX_PASSIVE 0x10 /* reached error passive status RX */
#define CAN_ERR_CRTL_TX_PASSIVE 0x20 /* reached error passive status TX */
/* (at least one error counter exceeds */
/* the protocol-defined level of 127) */
/* error in CAN protocol (type) / data[2] */
#define CAN_ERR_PROT_UNSPEC 0x00 /* unspecified */
#define CAN_ERR_PROT_BIT 0x01 /* single bit error */
#define CAN_ERR_PROT_FORM 0x02 /* frame format error */
#define CAN_ERR_PROT_STUFF 0x04 /* bit stuffing error */
#define CAN_ERR_PROT_BIT0 0x08 /* unable to send dominant bit */
#define CAN_ERR_PROT_BIT1 0x10 /* unable to send recessive bit */
#define CAN_ERR_PROT_OVERLOAD 0x20 /* bus overload */
#define CAN_ERR_PROT_ACTIVE 0x40 /* active error announcement */
#define CAN_ERR_PROT_TX 0x80 /* error occurred on transmission */
/* error in CAN protocol (location) / data[3] */
#define CAN_ERR_PROT_LOC_UNSPEC 0x00 /* unspecified */
#define CAN_ERR_PROT_LOC_SOF 0x03 /* start of frame */
#define CAN_ERR_PROT_LOC_ID28_21 0x02 /* ID bits 28 - 21 (SFF: 10 - 3) */
#define CAN_ERR_PROT_LOC_ID20_18 0x06 /* ID bits 20 - 18 (SFF: 2 - 0 )*/
#define CAN_ERR_PROT_LOC_SRTR 0x04 /* substitute RTR (SFF: RTR) */
#define CAN_ERR_PROT_LOC_IDE 0x05 /* identifier extension */
#define CAN_ERR_PROT_LOC_ID17_13 0x07 /* ID bits 17-13 */
#define CAN_ERR_PROT_LOC_ID12_05 0x0F /* ID bits 12-5 */
#define CAN_ERR_PROT_LOC_ID04_00 0x0E /* ID bits 4-0 */
#define CAN_ERR_PROT_LOC_RTR 0x0C /* RTR */
#define CAN_ERR_PROT_LOC_RES1 0x0D /* reserved bit 1 */
#define CAN_ERR_PROT_LOC_RES0 0x09 /* reserved bit 0 */
#define CAN_ERR_PROT_LOC_DLC 0x0B /* data length code */
#define CAN_ERR_PROT_LOC_DATA 0x0A /* data section */
#define CAN_ERR_PROT_LOC_CRC_SEQ 0x08 /* CRC sequence */
#define CAN_ERR_PROT_LOC_CRC_DEL 0x18 /* CRC delimiter */
#define CAN_ERR_PROT_LOC_ACK 0x19 /* ACK slot */
#define CAN_ERR_PROT_LOC_ACK_DEL 0x1B /* ACK delimiter */
#define CAN_ERR_PROT_LOC_EOF 0x1A /* end of frame */
#define CAN_ERR_PROT_LOC_INTERM 0x12 /* intermission */
/* error status of CAN-transceiver / data[4] */
/* CANH CANL */
#define CAN_ERR_TRX_UNSPEC 0x00 /* 0000 0000 */
#define CAN_ERR_TRX_CANH_NO_WIRE 0x04 /* 0000 0100 */
#define CAN_ERR_TRX_CANH_SHORT_TO_BAT 0x05 /* 0000 0101 */
#define CAN_ERR_TRX_CANH_SHORT_TO_VCC 0x06 /* 0000 0110 */
#define CAN_ERR_TRX_CANH_SHORT_TO_GND 0x07 /* 0000 0111 */
#define CAN_ERR_TRX_CANL_NO_WIRE 0x40 /* 0100 0000 */
#define CAN_ERR_TRX_CANL_SHORT_TO_BAT 0x50 /* 0101 0000 */
#define CAN_ERR_TRX_CANL_SHORT_TO_VCC 0x60 /* 0110 0000 */
#define CAN_ERR_TRX_CANL_SHORT_TO_GND 0x70 /* 0111 0000 */
#define CAN_ERR_TRX_CANL_SHORT_TO_CANH 0x80 /* 1000 0000 */
/* controller specific additional information / data[5..7] */
#endif /* CAN_ERROR_H */